What motor oil to fill in Nissan. Which oil is best pouring into the engine Nissan x Trail. Diesel power units CD20

Often car enthusiasts ignore the information set out in the manual to the car, violate the shift deadlines of the lubricant material, pour a car that is not suitable for type, class or season. Why it is important to use recommended motor oil for Nissan Qashqai. We will tell in this article.

Taking a selection of engine oil for Nissan Cascaja, it is worth considering the manufacturer's recommendations of the machine. Required information regarding the type, class, viscosity of the car, as well as the timing of its replacement is set out in the operating instructions for the vehicle. Special attention should be paid to the viscosity characteristics of lubricating mixtures. Fluids designed for winter should not be applied with very high temperatures Beyond the car. Lubricant, designed for the summer, does not withstand too low temperatures and begins to crystallize. All-season oilsare a certain alternative between the two previous types of lubricants, but buying all-season should pay attention to the temperature at which the liquid can be used. For example, semi-synthetic cars operate in a smaller temperature range than synthetic. Mineral fluids are recommended to pour into motors with big mileage.

Recommended motor oil for Nissan Qashqai meets the technical characteristics and constructive features Engine of the specified auto model. According to tolerances, the buyer may understand that the engine fluid is suitable for a particular brand of the machine, provides normal operation and protection of the motor. If the engine fluid has been tested, for example, on Nissan Casca and satisfied the requirements of the plant's manufacturer, the corresponding tolerances will be present on the canister with oil.

Nissan Qashqai J 10 2006-2013

Characteristics of oil

According to the manual, you need to pour motor oils that meet the following requirements:

1. In HR16DE or MR20DE auto motors:

• original motor nissan liquid;
• according to the API - SL or SM standard;
• according to the ILSAC specification, the GF-3 or GF-4 group;
• in accordance with ACEA - A1 / B1, A3 / B3, A3 / B4, A5 / B5, C2 or C3.

1. IN power units K9K EURO 4 without a smbed filter:

• original lubricant nissan material;

1. For K9K Euro 4 engines with summer filter (For some versions of the car):

• by ACEA - A1-B1 (with parameters corresponding to the group ACEA - B3 / B4);

1. For K9K EURO 5 engines with a diesel filter (for some versions of the car):

• according to aCEA classification - C4;
• "Low Saps" (having low ash content).

1. For M9R motors without a smbed filter:

• original Nissan engine oil;
• according to ACEA - B

1. In M9R auto motors with a diesel filter (for some versions of the car):

• nissan branded lubricant;
• according to aCEA specification - C4;
• "Low Saps" (having low ash content).

1. In R9m motors:

• original Nissan engine oil;
• according to ACEA - C4;
• "Low Saps" (having low ash content).

Filling capacity

Oil viscosity

For diesel engines, the following requirements for oils for viscous characteristics:

1. In the power unit, K9K is preferably used SAE 5W - 30. If such an oil is absent, then using the scheme 1 it is necessary to choose the corresponding liquid.
2. For M9R motors without a particulate filter, you can only use 5W - 40 or 0W - 40.
3. For K9K and M9R engines with a diesel filter (for some versions of the vehicle) or R9M apply only 5W lubricants - 30 groups "Low SAPS". (low-rise).

According to the scheme, you need to use auto:

• 5w - 30 V temperature range -30 ° C (and less) to +40 ° C (and higher);
• 10w - 30; 10w - 40; 10w - 50 under -20 ° C to +40 ° C (or more);
• 15w - 40; 15w - 50 in the temperature range of -15 ° C to +40 ° C (or more);
• 20w - 40; 20w - 50 under -10 ° C to +40 ° C (or more).

Nissan Qashqai J 11 since 2013

Characteristics of oil

1. For HRA2DDT engines:

• nissan branded motor fluid;
• according to the ACEA - A3 / B4 standard.

1. In the MR20DD power units:

• nissan branded engine oil;
• specifications ACEA - A3 / B4

1. In K9kvyvigators K9K:

• corporate Lubricant Nissan;
• quality class by ACEA - C4;
• "Low Saps" (low-rise).

1. For R9M Automotors:

• original Nissan engine oil;
• quality class by ACEA - C4;
• "Low Saps" (low-rise).

Filling capacity

Oil volume necessary for replacement, with oil filter and without:

Oil viscosity

1. For gasoline engines, it is preferable to use 5w - 40. In the absence of said liquid, it is worth choosing oil according to Scheme 2.

• In diesel engines, K9K with a diesel fiber is recommended to use only 5W liquids - 30 "Low SAPS" groups (low-rise).

1. For R9M units operating on DT, it is allowed to use only 5W - 30 DPF groups "Low SAPS" (low-rise).

According to Scheme 2, you can choose the following cars:

• 5w - 30; 5w - 40 at a temperature of -30 ° C (and less) to +40 ° C (and higher);
• 10w - 30; 10w - 40; 10w - 50 in the temperature range of -20 ° C to +40 ° C (or more);
• 15w - 40; 15w - 50 under -15 ° C to +40 ° C (or more);
• 20w - 40; 20w - 50 with temperatures range from -10 ° C to +40 ° C (or more).

Conclusion

Recommended engine oil for Nissan Cascais is selected with reference technical characteristics Power unit. For some models, Nissan Cascais manufacturer it is recommended to use only oils that meet the requirements of DPF "Low SAPS" (low-rise). The selection of gasoline engines is carried out taking into account the temperature overboard the car, the desired fluid can be selected using circuits 1; 2 set forth in the manual to the car. For most diesel units, more stringent requirements are presented, lubricant is allowed, having a viscosity specified by the plant by the manufacturer of the machine.

The chemical composition of lubricants is optional to study before planned change of car. It is enough to familiarize yourself with Manul to the car. In this documentation, the manufacturer describes the parameters of the recommended engine oil for Nissan Almera..

Nissan Almera Classic B10 2006-2012 release

QG 15DE 1.5 L and QG 16DE 1.5 (6 L and QG 16DE 1.6, operating on gasoline.

If you consider the instruction manual for the Nissan Almer, then the manufacturer of the car is recommended to use lubricating liquidsCommitable:

• original car Nissan;
• in accordance with the API classification, the type of oil SH, SJ or SL;
• according to the ILSAC standard - GF-3;
• the viscosity of the lubricant is selected according to Scheme 1;
• approximate volume of oil for replacement oil filter It is 2.7 l (without filter - 2.5 liters).

The approximate volume of the car is calculated on the basis of a fusion lubricant, excluding the lubricant remaining after the drain in the motor.

According to Scheme 1, you need to use motor lubricants:

• if the temperature is from -30 ° C (and less) to +30 ° C (and higher), pour 5w - 20,
• at temperature conditions from -30 ° C to +30 ° C (and higher), 5W - 30 are poured;
• if the thermometer shows from -20 ° C (and less) to +30 ° C (and higher), pour 10w - 30; 10w - 40 (7.5W - 30);
• in the temperature range from -10 ° C to +30 ° C (or more) use 20W - 40;
• at temperature mode from -10 ° C to +25 ° C poured 20w - 20;
• from 0 ° C to +30 ° C (or more) Apply SAE 30.

Nissan Almera N16 2000 - 2006 release

Gasoline power units QG15DE 1.5 L and QG18DE 1.8 l.

• nissan's original lubricants;
• according to aPI classification - type of oil SH, SJ or SG (prohibited Application API - CG-4);
• according to the ILSAC standard GF-I, GF-II, GF-III;
• quality class for ACEA - 96-A2;
• the viscosity of the lubricant is selected according to Scheme 2;
• the approximate volume of engine oil for replacement with regard to the oil filter is 2.7 liters (without filter - 2.5 liters).

According to the Scheme 2, the manufacturer is recommended to pour:

• at temperature conditions from -30 ° C (or less) to -10 ° C, pour 5w - 20 (this oil is not recommended to use if the machine is often exploited at high speeds);
• at temperature mode from -30 ° C (and less) to +15 ° C, 5W - 30 are poured (automation helps reduce consumption fuel mixes car);
• in the temperature range from -20 ° C to +15 ° C, pour SAE 10W;
• if the thermometer shows from -20 ° C to +40 ° C (or more), use 10W - 30; 10w - 40; 10w - 50; 15w - 40; 15w - 50;
• if the thermometer shows from -10 ° C to +40 ° C (or more), use 20w - 20; 20w - 40; 20w - 50.

It is better to apply 5W - 30 lubricant.

Nissan Almera G15 since 2012

According to the manual, it is necessary to use lubricants that meet the requirements:

• branded engine fluids Nissan;
• quality class by ACEA - A1, A3 or A5
• according to the classification of API -SL or SM;
• the viscous parameters of motor fluids are selected according to Scheme 3;
• the approximate volume of the car for replacement is 4.8 liters (including oil filter) and 4.7 liters (excluding the filtering device).

According to Scheme 3, it is necessary to pour motor fluids:

• in the temperature range from -30 ° C to +40 ° C (and higher), 0W - 30, 0W - 40 are poured;
• if the thermometer shows from -25 ° C to +40 ° C (or more) Apply 5W - 30, 5W - 40;
• with the thermometer indicators from -25 ° C to +40 ° С pour 10w - 40.

It is preferable to apply oil 5W - 30.

Conclusion

Recommended motor oil for Nissan Almera can fill the gaps in friction pairs of a certain type of engine to protect the motor from abrasion and overheating. The fill of a more dense or liquid car will worsen the performance characteristics of the power unit, will result in its breakdown.

Manufacturers lubricants Use various bases of lubricants (synthetics, semi-synthetic, mineral water), dominated different chemical additives. The fact that the machine is a specific brand is suitable for a specific machine model, can testify to the canister tolerances. At the same time, the car for the summer, they buy more viscous than for the winter.

Each owner Nissan X-Trail Wants to reliable and trouble-free operation of his car, one of the elements of which is the engine oil. The engine oil for Nissan X-Trail is the "health" of the engine, which directly depends on how much the oil you use. It is important to understand the characteristics of automotive engine oil, which are suitable for this model of the car Nissan X-Trail. We will understand this.

First of all, the engine oil must have appropriate viscosity indicators so that it can be used in the widest temperatures. Also, oil in its physico-chemical content should form a solid film on the parts of the engine and thereby ensure protection against the wear of the moving engine elements (CPG, valve, and so on.)

The types of engine oils are also distinguished by type of viscosity, which should be purchased depending on the time of year and air temperature. There are also an extractional engine oil for Nissan X-trail, which can be applied in summer and in winter.

Here is "squeezing" from diagrams instruction manual:

Chemical composition of motor oils

When choosing non-original oil, it is worth considering the number of additives, because more than them, the higher the likelihood that unwanted oxidation products in the engine are eliminated by increasing the temperature in it. Buying oil for Nissan X-Trail, you can ask the seller the level of the content of ash content. After all, than this indicator below, the chance of the likelihood of undesirable substances in the engine Nissan X-Trail decreases.

Motor oils can be distinguished by the following parameters:

• for gasoline engines and for diesel;
• oil type (mineral, synthetic, semi-synthetic);
• viscosity (SAE, for example, these are "digitw-dwyfra" - 5W-30);
• tolerances of car manufacturers (these are the characteristics that are advisted by the Nissan engineers themselves). Those. Is it possible to replace this non-original oil specifically this non-original oil.

For gasoline engine from chemical characteristics oils worth choosing an extractional semi-synthetic or synthetic oil(5W-30 or 5W-40). The semi-synthetic price / quality is best suited: Nissan Icstret has a modern powerful engine. Such an oil has a property to reduce its consumption with a gasoline engine and to ensure reliable protection.

Still, synthetic oil is always reliable.

Motor oil for diesel engines should be considered carefully. Taking into account that diesel engine More powerful than gasoline, it is worth choosing a synthetic oil for Nissan X-trail. According to companies producing oil, in most cases, such oil provides the maximum degree of wear from wear and facilitates the start at low temperatures.

In any case, it is worth remembering that choosing engine oil for Nissan X-Trail T31, it is still worth paying special attention On the recommendation of the manufacturer of the car itself. Nissan company Releases automotive engine oil, which contains all the necessary characteristics. It has excellent viscosity, has good degree protection, operational even at low / high temperatures. Designed was designed specifically for high productivity in all engines cars Nissan.. Oil for Nissan X-Trail is synthetic, applied by type cars, oil viscosity in SAE 5W-30.

Oil 5W-40 into the engine Nissan X-Trail T31. Candles of 5 liters. and 1 l.

Of course, motor oils of other manufacturers can be used, the main thing in this business is guided by the recommendations of the Japanese and read the instructions. In this case it is also important to consider the cost of motor oil. Immediately note that quality

Today, the lubricant market offers owners vehicle A wide selection of oils for motor, transmission, etc. Different brands give our products with a certain set of qualities. It can also be significantly different.

One of the upscale products is nissan oil. This Japanese brand has developed many variable variable products that are intended for different marks cars. What is this oil, what characterizes it is characterized, will be considered further.

Manufacturer

Japanese company Nippon Oil Corporation is known all over the world as one of best manufacturers Original lubricants. All products complies with high international requirements. Also presented products received the approval of the State Standard of the Russian Federation. For our country, oils are produced taking into account the characteristics of the climate.

In large demand in the domestic market enjoy nissan oils for automatic transmission, Motors of the old and new sample. The world has long become the usual practice of cooperation of advanced manufacturers of lubricants with engineering corporations. They exchange their developments, which allows producing products as high as possible.

Not exceptions and lubricants "Nissan". This brand is one of the activities of the machine-building company of the same name. Owners of cars brand "Nissan" can pick up the most suitable oilwhich will protect the vehicle system from adverse effects.

Features of products

Choosing nissan oil for variatoror the motor, it is necessary to consider a number of features of such products. Oils are made on the basis of high-class components. Their viscosity is well balanced. All-season oils can be used both in severe heat and in the cold. It is important to properly select the type of viscosity corresponding to the climatic zone.

The bases are based on additives. They are designed to neutralize the products of chemical reactions that occur in the mechanisms with a large heating. As a result, corrosion and naars appear on the details of the piston category, the crank-connecting rod mechanism.

The composition determines the low sulphate ash content. This increases environmental lubricant indicators. When using the products presented, transmission, engine and other systems and mechanisms will be securely protected from wear.

Motor oils

When choosing lubricants, it is necessary to clearly follow the recommendations of the manufacturer of the motor. At the same time, it is necessary to take into account its configuration and mileage. As a rule, the owners of even the oldest models of cars do not pour hydrocracking mineral oil. Nissan Almera (1995), Micra (1992), Primera (1996) and other fairly old models are well tolerated semi-synthetic oils.

The cost of semi-synthetic will be relatively lower than that of synthetics. So, original oil "Nissan" of this category can be purchased at a price of 350 rubles / l. It includes both high-class synthetic components and minerals. Menten the presented means in engines with mileage will be required more often.

For cars with a new sample engine, the company has developed a line of synthetic agents. This product is most technological. It is capable of providing normal operation of the motor even under loading conditions. The price of synthetic is from 500 rubles / l.

Transmission oils

After deciding to replace the oil in the transmission, it is also necessary to carefully treat the choice of oil type. First of all, it should be noted that there are products for mechanical and automatic gearbox. In the first case, you can buy oil at a price of 350 rubles / l. For automatic boxes The programs on sale are presented products, the cost of which is from 450 rubles / l. One of the popular varieties of compositions for automatic transmission is oil CVT Nissan.

Also, when choosing a gearbox lubricant, it is necessary to consider, in what conditions the mechanism works. For small and medium loads, preference should be preferred by the composition of GL-4. If the work of the car is associated with significant overloads, it is necessary to acquire the GL-5 tool.

In the first type of oils there is a smaller amount of detergent additives. Similar funds are cheaper. The GL-5 standard suggests the use of a larger amount of native, detergent and other additives. This allows you to protect the movable elements of the mechanism from wear.

Viscosity class

Engine Nissan Oil Or transmissions is made by the Japanese brand for new technologies. Due to the special approach to the creation of the base base of the oil, a balanced set of additives, the presented products can be used in the system throughout the year.

All-season oils have a high ability to adapt to environmental conditions. Due to good yield, oil does not freeze in the system in the frost. In the summer, with an increase in overload, the oil becomes more liquid. However, special technologies do not allow it to fully flush into the crankcase. A thin but durable film is formed on the surface of the mechanisms. It protects surfaces from mechanical damage.

For the southern regions of our country, it is recommended to acquire engine oil with a viscosity class by SAE 10W40. For drivers who are more likely to exploit the car in the middle climatic strip will be suitable for viscosity class for the north climate more suitable oil Standard 0W20.

Action of additives

Contains a certain set of additives. This allows you to apply the presented product in different conditions. In the manufacture of motor transmission oils The Japanese brand applies only high-quality modern components. The amount of sulfur, phosphorus and other adverse components of the additive package are reduced to a minimum.

One of the main appointments of the additive is the creation on the details and mechanisms of fine, but very durable films. It should not be collapped under the influence of temperature and pressure. These requirements are fully replied by the presented products.

Also additives counteract corrosion, destruction oil basics. They have a cleansing effect. Pollution, Nagar is collected by oil from the mechanisms. In the process of the entire life of the lubricant, these particles securely holds the lubricant, without giving them to settle on the surface surfaces again.

Benefits of oils

Since Nissan oil is an original product of the engineering concern, all the parameters of the compositions are thoroughly tested directly in production. At the same time apply real engines "Nissan." This allows the company to offer the buyer not just high-quality oil, but the composition that will be better than others approach the features of the motor.

The process of creating new formulas is continuous. New scientific developments The company applies when creating its lubricant products. These are high-tech, clean, durable oils. They are able to reliably protect the mechanisms from premature wear and destruction.

When using the optimally suitable composition, the engine is maintained clean, not subject to adverse environmental impacts. Its repair will be needed still not soon. The system will work stably, on full power. In this case, the toxicity of exhausts will be much less.

How to distinguish fake

Replacing Oil in Nissan Must be done in a timely manner. The manufacturer has recommended recommendations for the frequency of this process. In some cases, drivers may encounter a situation where the original oil does not differ in high quality. If the operation of the motor has become noisy, its power falls, it means that a fake was purchased.

Everyone can distinguish with poor-quality products. It is important to know which nuances need to pay attention to. The plug, which is closed by the canister, should be indign. The company's branded hologram must be printed in the form of a 3D picture. Also on the bottom there should be a badge with the number of the party, the code. Also from the bottom of the canister must be applied by Putinka. In this case, the contents of the canister must have a dark color. Fake will be lighter. If this composition is freezing, it will acquire a white-blue shade.

Many motorists are asked about the choice of the most efficient lubricating products for Nissan cars. To carry out a competent choice, it is necessary to study the main characteristics of the vehicle and the conditions of application: the type of power unit, mileage, climate.

As additional information, you can familiarize yourself with the tolerance specified for a particular auto model. Such information is prescribed in the service book or can be found in the global network. The most significant are ACEA and SAE tolerances. As for the second, it indicates a viscosity class.

Viscosity

Everyone experienced motorist familiar with such indicators like 5W30, 10W40 and so on. These numbers indicate the temperature index of the engine fluid. The most popular labels on domestic space are: SAE 0W-20 ° / + 35 ° C.

For countries with a cold climate, oils are most often used with SAE 5W30 indicators with a temperature of -30 ° to + 35 °. In moderate zones, the SAE 5W liquid with identical temperatures is best. No less relevant and lubricant with 5W40 characteristics.

Do not ignore and admission by ACEA. This indicator demonstrates compatibility with DVS. Passenger cars Nissan Cashkai, Example, Almera, X-Trail, Tiida, Teana, Postfinender, Murano with the left steering wheel work perfectly on lubricant with A3 / B4 indicators.

These are standard views from the manufacturer of Nissan with labeling 5W40. If it is not possible to use original products, experienced professionals recommend pouring oils from the company:

• Shell;
• Total;
• Castrol;
• ULTRA;
• Mobil;

First of all, it is worth paying attention to the tolerances, reputation of the company and the final value. However, if we talk about a price aspect, then for the oil of Nissan 5W40 will have to be given in the region of 2000-2300 rubles for 5 liters of canister. It is significantly cheaper than foreign analogues.

For passenger vehicles with a seas-based filter, a liquid C4 - ACEA is allowed. In this case, you can use an alternative lubricant from LIQUI MOLY.

Nissan sports cars require oil use with special characteristics. Usually on sports cars apply compositions with high levels Viscosity - 10W50, 15W50. Owners of such models like Skyline or 350Z prefer to trust the opinions of professional professionals.

On such models most often use original products from Mobil, LM, Motul. Viscosity is selected according to the manufacturer's recommendations and technical parameters Engine. Climatic conditions also play an important role in choosing efficient products.

Oil selection by Nissan models

Oil for Nissan Example with GA16DS gasoline engines, SR20DI, SR20DE

For all types of power units with specified parameters, the use of such lubricants is recommended:

1. branded lubricants from the manufacturer of vehicles;
2. sG, SF liquids by API classification;
3. the viscosity class is selected according to the climatic conditions and engine parameters.

If we are talking about the approximate amount of the product used, then it will take to replace:

• SR20DI - 3.2 and 3.4 liters, respectively;
• GA16DS - 2, 8 and 3, 2 liters.

The choice of viscosity class is performed according to the temperature conditions:

• range from -25 ° C -10 ° C - 5W20;
• from -25 ° C + 15 ° C - 5W30;
• from -20 ° C + 40 ° C - 10W30.

It is best to use products with a class of viscosity 10W30 in zones where temperature indicators are observed more than 20 ° C. For hot climates, oils with a viscosity of 20W50, 20W40 are used.

Cascai

As for the use of lubricant products for the Nissan Qashqai motor, then special attention should be paid to the manufacturer's recommendations. Therefore, the power units of the car is best pouring substances on a synthetic basis with a class of viscosity 5W40.

Since 4.5 liters are placed in the DVS system of Kashkai 2.0, it is necessary to purchase 5-liter canisters with original oil.

Nissan X-Trail

According to performance characteristics QR20DE gasoline engines, QR25DE, for them should be used original liquids from the company Nissan:

• according to the API system with SH, SG classes, SJ is used in some cases;
• on the ACEA 98B1 system;
• by classification ilsac Type GF1.

For temperature indicators from -30 ° C, 10W30 lubricants are applied. For territories with a hot climate, it is necessary to use products with a viscosity of 20W40.

On dry engine Nissan. The X-Trail will take about 4.5 liters of oil. About 3.5 liters will leave the basic fluid.

Nissan Zhuk.

HR16DE power units operating on gasoline need lubricant pouring with characteristics and requirements:

• original products from the manufacturer of the car or foreign analogue;
• high quality software SL, SM - API;
• compliance with ACEA standards;
• quality standards ILSAC GF4, GF3;
• viscosity class according to climatic conditions.

For power vehicles Nissan Jukeworking on diesel, use liquid:

• from the car manufacturer;
• by class ACEA - C4;
• according to sAE classification, the viscosity of the oil should be 5W30;
• low Saps low-rise mixtures.

Any replacement of the lubricant product per DT will not cost without 4.4 liters, and taking into account the oil filter 4, 24 liters.

Nissan Teame

According to the operational characteristics of the car, the manufacturer recommend pouring corporate oil. The manual instructions describe the parameters: viscosity, class, type and features of use.

After a thorough study of the parameters, you can get to choose motor lubricant with considering:

one). Season when liquid can be applied. Specialists, do not recommend pouring separate products for summer or winter. It is better to use emacontal oils because they can be operated as in the winter and summer period. Nevertheless, any type of mixture used has its own characteristics, additives and yields;

2). The basic base of the received substance. Do not recommend using mineral fluids on aggregates Nissan Teana.. Uninterrupted work is provided only due to synthetic and half artificial lubricants;

3). The presence of special labeling on the canister with butter demonstrating certain characteristics and properties for one or another type of motor.

Teana L33 2014 release

According to the productive characteristics of the car, experts recommend applying for QR25DE units:

• original mixture from Nissan;
• quality standard SM, SN, SL by API;
• quality level from ILSAC - GF5, GF4, GF3.

As for the filling volume of the lubricant product on the power devices VQ, QR, then it is 4, 3 liters, and taking into account the filter of 4.6 liters.

Nissan Tiida 2004-2014 release

According to the designated instructions for models Nissan Tiida. With MR18DE engines, HR16DE must use special types of liquid:

• branded lubricants from Nissan or similar oils from foreign manufacturers;
• quality ACEA - class A1B1, C2C3;
• iLSAC standards GF4, GF3;
• norms API - types SM, SL.

The viscosity level is selected according to climatic conditions.

Nissan Almera

Manufacturers advise Nissan branded oil with 5W30 or 5W40 viscosity level. These indicators correspond to the products on a synthetic basis for extractional use. Filling capacity Makes up 4 liters.

Foreign analogs can also be applied:

• Total Future 5W30;
• Mobil 5W40;
• Petro-Canada 5W30.

Any use of oil for the Nissan car should be deliberate and verified. Do not purchase lubricants that do not correspond to the parameters systems of DVSAs it can lead to wear and complete deformation of the motor.