How to make your own front suspension for an ATV. How to assemble a homemade ATV. There are no low gears and differential locks

Today we will talk about how to make a real ATV out of a motorcycle, walk-behind tractor or moped with our own hands. We will also consider drawings, diagrams and methods for assembling a homemade ATV from scrap materials in the garage

From a motorcycle like "Ural" - this big, bulky, heavy and "gluttonous" animal has a wonderful four-stroke engine with reverse gear and costs "a penny". For this reason, it is much cheaper and more fun for enthusiasts to create their own designs for these SUVs.

Before starting the assembly, it is necessary to draw up a detailed list of units and parts that will be needed to create your own brainchild, develop a work plan and a design drawing.

It is logical that first of all it is necessary to find the "heart" of the future ATV - the power unit. Absolutely anything will do, from a conventional walk-behind tractor to a six-liter V12 - there are such precedents. In most cases, motorcycle engines are used - they are economical and small-sized.
To use high gear ratios under normal operating conditions, a Minsk or Ural engine will suffice.

In the summer, the issue of overheating arises, so air-cooled models should be chosen. Another good option is the Soviet-made boxer engines, the indisputable advantage of which is powerful traction and a completely unpretentious cardan transmission.

There are two common ATV rear suspension solutions.
Gear-cardan system. The design turns out to be as lightweight and simple as possible, but there is no differential, which, in principle, can be sacrificed for the sake of the previously mentioned advantages.

Using a road bridge. The construction turns out to be extremely heavy, and if there is no desire to have an ATV with a car base, it is necessary to shorten the bridge, which is a very non-trivial task. Of the advantages, it is worth highlighting only the presence of a differential, which is useful when driving on highways.

The possibilities for front suspension and steering are tremendous. The suspension arms of an ATV carry a significantly lower load than automobile ones, respectively, they can be made independently, using available tools for this. The best option is to create a suspension based on the existing Ural motorcycle.

It is ideal to remove the frame from the donor motorcycle and add the necessary elements - this eliminates a number of problems, but the design can turn out to be unnecessarily complicated.

We collect the frame (frame). We connect the prepared metal beams, according to the drawing, to each other using spot welding. We check the structure and carry out solid welding. Alternatively, you can simply remake the frame from the donor motorcycle - it will be no worse.

Installing the engine. It can be installed both from the back and from the front - the main thing is to firmly fix it with bolts on the bottom of the frame.

We mount the drive and transmission to the rear wheels. The drive does not need to be created independently - it goes with the engine from the donor transport and is installed on the frame. Again, the drive and transmission must be properly secured to the frame to prevent backlash.

The steering is also installed from the motorcycle. Together with the steering wheel, the fuel tank "migrates" to the ATV. In general, if you imagine the structure, it will look like this: 3/4 of the ATV is the same "Ural" or another motorcycle, 1/4 is a homemade frame and suspension. ...

We install the wheels from a small-sized vehicle ("Oka" or "ZAZ-968"). The rear wheels can go to an ATV together with the rear axle of the car, or they are attached as follows: we take ready-made axles with discs, and then we attach a gearbox to the rear for the drive. and install wheels on the disks
With a gearbox on the rear axle and an engine, we assemble a single drive (again, it will be easier if it is completely rearranged from the donor tool). We do it as follows: from the engine we pull the chain onto the gearbox and fix it, after which we carry out a performance check. Finally, we fix the whole structure on the frame.

The front suspension is independent - it is more profitable in terms of time and money, since an all-wheel drive ATV requires significant revision of this unit by a professional turner, welder and electrician, which will take a very long time. Alternatively, we purchase ready-made factory units for ATVs.

Thanks to its reliable, time-tested design, excellent power and traction, the Ural motorcycle is the most popular donor for homemade ATVs.
Frame.

ATV Frame Specification:

Material: 2.5 x 2.5 square profile
Total length: 130cm
Overall height: 74 cm (landing level)
Overall height: 84 cm (handlebar level)
Wheel base: 105 cm
Distance between axles: 70.5 cm
Axis tilt: 14 degrees
Track (distance from the outer edge of the tire to the outer edge of the other): front: 105 cm; back: 112 cm
Ground clearance: 7 inches (with 16-inch rear wheels)
Materials:
Square profile:

2.5x2.5 square profile - 9.75 meters
Pipes:

1.22 meters - 1 x .065 (inches)
1.22 meters - 3/4 x .065
0.3048 meters - 3/4 x .125
0.915 meters - 5/8 x .125
0.61 meters - 1/2 x .083 T6 aluminum tube
Rental:

0.61 meters - 1 x 3/16 (inches)
0.915 meters - 1 1/4 x 1/4
0.61 meters - 5 x 1/8 (engine and suspension plate)

You will also need spring dampers for the rear and front suspensions.

Engine for ATV:

Now you need to securely attach the engine to the frame. The engine is best used from a moped. After screwing it to the frame, connect the motor shaft to the gear on the rear axle with a simple chain drive. After that, bring all engine controls to the steering wheel and secure the pedals and levers to your frame.

The best and easiest way to make parts of the body kit or bodywork of an ATV is fiberglass. After manufacturing on wooden or plasticine blanks, the elements of the aerodynamic body kit are adjusted relative to each other, polished and then painted in the desired color, after which they are already attached to the ATV frame. Ideas, as well as some ready-made elements, for example from a broken car (of course, if you have them available), options for an external body kit can be taken from any serial models.
Important:

Remember that in order to operate the ATV on public roads, you will need to register it with the traffic police, where it is necessary to register any vehicles with an engine over 50 cc and a maximum design speed of over 50 km / h. Therefore, we recommend not to use engines larger than fifty cubic centimeters.

The frame for the ATV is welded using round pipes, corners and square profiles. At the same time, it is advisable to use elements of various mopeds and motorcycles, because it is there that pipes with high strength are used. Never use water pipes. They do not have the required strength and can crack at any time. Then we weld on the mounting brackets and fix the engine to the frame. Make your first ATV out of a moped engine
Even your children will like it, who will simply be delighted with it. The fact is that petrol-powered ATVs for kids are a great toy for every child. After all, he does not develop huge speeds, but the guys will have more than enough emotions from overcoming rough terrain. Next, we connect the engine shaft to the rear axle gear using a chain.

We install the ATV control mechanisms on the steering column, and attach the pedals and levers to the frame. The power supply and ignition system is taken from the same moped model from which we took the engine. Over time, they can be improved and refined within reasonable limits, of course. You can choose a fuel tank of the appropriate size. Do not forget also the point that in the question of how to make an ATV, each stage must be carefully worked out. Therefore, installing a battery on such a car is simply necessary.

You also need parts for assembling an ATV:

1 - disks from a scooter tourist or ant
2 - rubber for motoblock 10 inches and wider 4.5 or 5.0
3 - profile pipe 15 * 15. 17 * 17. 20 * 20. 25 * 25.
4 - bearing 306 - 12 pieces
5 - external cv joint VAZ 2109-08 16 pieces of which 4 are new 4 used, but workers, and 8 can be killed (for any hundred in scrap metal) and 8 anthers.
6 - engine with a moped at least 150 cc. for example, a viper storm in a place with a wiring with an ignition switch with a wheel and a glushak
7 - reducer from a motor scooter ant reinforced (all shafts on bearings)
8 - four leading sprockets from 21 tooth Izh and two new chains
9 - ball joints with Renault 21 for any disassembly with a shaft and a penny
10 - reactive thrust of the rear axle (short.) From 2101, 6 pcs.
11 - a bunch of different bolts of cutting wheels and electrodes, well, that's all along the way
12 - shock absorbers of a yamaha ario smoped -4 pieces from a Honda Lead 2 pieces and 8 more killed shock absorbers from any yap mopeds (we will cut off the ears from them)

In winter, the ATV can be easily converted by replacing the rear wheels with pneumatics and installing a steering ski in front; the car thus turns into a snowmobile, and the transformation takes less than an hour. The use of available materials in the manufacture of the all-terrain vehicle, the simplicity of the design may well ensure the repeatability of the machine even in a home workshop.

The frame of the MTS is made of round tubes, square profiles and corners. It features detachable connections that allow you to remove the steering column assembly when installing the engine, as well as the front axle beam. Each of the connectors consists of a conventional "water pipe" sleeve, squeegee and locknut.

To tension the chain connecting the engine with the gearbox, the motor frame (part of the frame of the Minsk motorcycle) is moved; the axle of the rear wheels with bearings also has the ability to move in the longitudinal direction, which allows you to adjust the tension of the second chain connecting the gearbox to the rear axle. Front and rear fenders are removable (they are not available in the version of the snowmobile). The frame elements were joined by electric welding.

The engine of the motor vehicle is from the Minsk motorcycle, I have no comments on its operation. It is possible, of course, to install more powerful engines - from the Voskhod motorcycle or the Tula scooter; it is only necessary to adjust the dimensions of the frame for them. The choice of the "Minsk" engine was due to its efficiency and low weight. Its power turned out to be quite sufficient for trips on a snowmobile with a passenger, it is also possible to tow a skier or sled. The starting properties of the motor in summer and winter are quite satisfactory.

The directional control of the summer version of the motor vehicle is provided by turning the front wheels using two rods; for the winter version, there is a lever and a rod connecting it to the ski fork. The latter is borrowed from a moped. The front axle is from the SZD motorized carriage, however, somewhat reduced: sections are cut out of its beams and the central parts (with the torsion bolt) are welded to the peripheral ones (with the suspension arm bushings). In the winter version, the levers, steering knuckles, rods and torsion bars are dismantled.

The steering wheel is from the "Tourist" scooter, it fits perfectly with the steering shaft with an M10 bolt. The controls are standard, motorcycle. The brake lever is connected by a cable to the brake pads mounted on the gearbox.

Reducer. Its basis is the hub of the rear wheel of the Tula-200 scooter, to which an asterisk is welded from the side of the brake drum. The rear axle is driven by a chain with a 19 mm pitch. The transmission brake makes the rear axle much simpler. The sprocket on the axle is fixed with an M14 bolt, the hubs of the travel wheels are similarly attached, as shown in the drawings. As the basis of the gearbox, you can use not only the hub of the "Tourist" wheel, but also other motor vehicles.

The axle of the driving wheels is a rod with a diameter of 30 mm; its ends are turned to Ø25 mm, turned hubs are put on these places. Wheels are used from a motorized carriage with a size of 5.00X10.0. Winter wheels of the usual design for pneumatic tubes on low-pressure tires: with plywood discs, aluminum cradles and belts for the chamber. The axle bearings are double-row, they have tapered inserts with nuts, which fix the axle well and do not require high machining accuracy.

More information about ATVs can be found at this link:

The design of the all-terrain vehicle is simple, it can be made in just a few days in a fairly primitive workshop - of course, if all the components are available. And the possibilities of using such a machine are the widest: as a winch when plowing a vegetable garden, to drive a circular saw, as a simple garden tractor (excellent cross-country ability, therefore cultivation, hilling, etc. is possible). In addition, you can increase cross-country ability by installing twin rear wheels. You can also mount a reverse gear from the SZA motorized carriage, in which the differential is replaced by a shaft, and then the all-terrain vehicle will receive reverse gear. Rubber wear due to the lack of a differential is not observed, and this does not affect handling.

Currently, the ATV is a popular vehicle. It is quite easy to operate, has good cross-country ability and a high degree of maneuverability. However, such an all-terrain vehicle is quite expensive and not everyone can buy it. Do not be discouraged, but you can try to make it yourself. How to make an ATV with your own hands? To help our recommendations.

If you are the owner of an old motorcycle and it is gathering dust in the garage, then do not rush to dispose of it. The Ural model is excellent for converting into an ATV.
The assembly of the all-terrain vehicle will consist of the following stages:

• alteration of the frame;
• installation of the instrument frame;
• engine installation;
• suspension installation.

What you need to work:

• bridge;
• shock absorbers;
• welding machine;
• Bulgarian;
• brake system;
• Tie Rod;
• metal profile sheet;
• motorbike.

Before starting the assembly, you should decide on the type of control of your homemade ATV. It can be motorcycle and steering.
The next step is to upgrade the frame by moving the vertical seatpost tubes 40mm back. Next, we weld the bridge to the Ural pendulum, slightly cut the lower fork and seat posts. Next to the pendulum suspension bushings, we weld struts made of pipes.
We shorten the bridge to make the vehicle more compact and more maneuverable. Now we are making a driveshaft, which can be built from the Oka axle shafts.
We need square tubes 25 * 25 * 2 mm for the manufacture of the front suspension. You can borrow steering knuckles from a Zhiguli car. Close attention must be paid to the braking system. It is better to purchase it separately to ensure maximum security.
When all the main elements are assembled, then you can start installing headlights, turn signals and brake lights. We trim the ATV with a profile and prepare it for painting.

ATV from a motorcycle "Izh"

Assembling an ATV from "Izh" does not differ much from assembling an ATV from "Ural".

If you don't even have such a motorcycle, then you can buy it for a very nominal fee. Which will be much cheaper than buying an expensive vehicle.
The fundamental difference between the assembly of an ATV from "Izh" does not differ much from the assembly of an ATV from "Ural".

ATV from scooter

A great homemade ATV can be made from a scooter. We start the work process with drawing up drawings that you can do yourself and slightly redo the frame. Next, we install the engine. We connect the engine shaft to the gear of the rear axle of the ATV using an ordinary chain drive. We bring the controls to the frame and fix the pedals and control levers.
It is better to use components from the same scooter, but it is better to borrow a fuel tank from a motorcycle. Control can be set to steering or motorcycle, whichever suits you best, the brake lever must be fastened to the transmission brake on the rear axle sprocket.
For the body kit, we use material from old automotive technology or fiberglass.

ATV from the car "Oka"

You can breathe new life into an old car by trying to build an excellent homemade ATV out of it. Your whole family will love it.
We start by studying professional drawings. We modernize the body, remove the doors and the ceiling. We use comfortable seats for comfort. Next, we install the engine and muffler.
We attach the wheels to the frame, using shock absorbers and native suspensions. It is worth thinking about which one you will need and taking care of it in advance. The most important is the braking system. You shouldn't try to save money on this element. We will use the brakes from the motorcycle. The steering wheel can be installed motorcycle or left native. It is important to securely fasten the tie rods. The body is sheathed with metal and painted.

Children's homemade ATV

The presence of an all-terrain vehicle in families with children is even more important. There is no better gift for a child than a wonderful car made by dad. We pay special attention to safety in the manufacture of a children's all-terrain vehicle. After all, we are talking about the health and life of children.

What is needed for a children's ATV

We decide on the dimensions and appearance. The possibilities are unlimited, everything will depend only on your skills and efforts.

There is no better gift for a child than a wonderful car made by dad.

We draw up a drawing, it is easy to deal with it yourself. The main stage is the manufacture of the frame. For it, you can use a ready-made model or weld it from a square profile (25x25mm). If you make a frame with your own hands, then due attention must be paid to the quality of the welds. We will buy new wheels, we choose them depending on the age of the child and on the quality of the road surface.
The choice of engine is wide enough. An electric motor from the Volga or a scooter will do. We will install the battery in such a way that it is not necessary to disassemble the entire structure for recharging.
After assembling all the major components, the most enjoyable part of the job begins. You can use a body kit from some old and unusable model of a children's ATV, or you can use your imagination and come up with a new original author's idea.
Do-it-yourself children's ATV 4x4 will significantly save your budget, bring joy to your child, and teamwork will bring the whole family together.

P.S. Homemade ATVs are not easy to do with your own hands. If something didn't work out right away, think about what and where you made a mistake. Thomas Edison made 10,000 unsuccessful attempts! before he invented the light bulb. And you will definitely succeed.

I started working on my project about a year ago. I assembled my homemade ATV mainly after work and on weekends for 2-3 hours, no more.

And now, after 11 months, all the big work was completed (there were minor improvements in the form of electrics, an ignition switch and other little things) and I decided that the prototype was already ready for testing and the first photo session.

The engine for my brainchild was a used motor from the Oka. The two-cylinder, thirty-two strong unit, according to my calculations, should have done an excellent job with a light quadric.

The basis of the ATV was the old Oka

Spatial frame, welded from steel water pipes. The upper and lower pairs of spars are made of VGP-25 pipe (25x3.2 mm) for auxiliary elements (crossbars, struts, etc.), I decided to do with VGT-20 pipes.

All side members are bent on a pipe bending machine. I bent the lower spars in the horizontal plane, the upper ones in the vertical. I welded the mountings for the levers and shock absorbers right after the frame was made, I welded and adjusted everything else as it was assembled.

ATV drawing

The car is made according to the all-wheel drive scheme, but without a transfer case. This happened due to the fact that the Oka engine was able to unfold along the frame and direct the output shafts from the checkpoint directly to the front and rear axles. To reduce the horizontal angles of the longitudinal hinges, the power plant with the clutch and the box had to be shifted to the left (relative to the longitudinal axis of symmetry).

The homemade transmission is assembled from factory units from the domestic "classics" with some modifications. For example, to increase the torque from the gearbox from the Oka, the main gear pair was removed and replaced with a chain drive. Differential locks and reduced no.

Kinematic transmission diagram

An extended gear shift rod was made, with outlets on both sides of the gearbox. He has two fixed positions - one for shifting 1-2 gears, the second 3-4 and reverse.

Cross-axle gearboxes were made from the rear axles of the VAZ. The original axles were redesigned: the axle shafts were removed and replaced by the shafts with the constant velocity joints, which I borrowed from the front-wheel drive "classic" model. By the way, I used the same CV joints in the transmission as intermediate shafts.

Management is implemented as follows. The upper part is a lever and a shaft, the lower one is with steering rods, as in a car, but with one bipod. Initially, the steering wheel was used from the Minsk motorcycle, but later it was replaced by the Ural one, due to its great strength. The steering shaft of the upper part is made of a 20x3mm tube with a travel stop at the bottom.
The lower part of the shaft is inserted into the support bearing, the middle part is fixed in the bracket-sleeve. From steel sheet 8mm I made a T-shaped bipod. The bipod ears are bent down so that they are almost parallel to the rods.

The steering shaft is inserted and welded into a 20mm hole at the edge of the rack, and tapered holes are drilled in the ears for the ends of the steering rods and reinforced with welded washers.

An ATV for a child on a battery will, without a doubt, be a great gift, while safe for the environment.

A battery-powered ATV for a child will undoubtedly be a great gift, at the same time safe for the environment, easy to operate and does not require constant maintenance. If you want to please your child with such a present, you have two options. The first is to buy a ready-made ATV. The second option is more difficult, but for those who are "friends" with technology, it will bring a lot of pleasure. As you probably understood, we mean self-assembly of a children's ATV. We will talk about how to make an ATV for a child with your own hands in this material.

If you are a creative person, then you will probably have your own ideas for creating an original model of a children's ATV. If this is "tension", you can borrow non-standard ideas from the Internet. The main thing is that you will enjoy the process and save on buying an expensive toy, because an electric ATV with your own hands will cost you much cheaper than the finished one.

How to make a children's ATV with your own hands?

Decide on the look and design of your brainchild. Basically, you can assemble a children's electric ATV of any size and any complexity - everything will depend on your abilities and technical skills. You can stretch the process for months, but if you want to quickly please the child, choose a simpler design, it can be modified when the child grows up.

As a basis for the future ATV, you can take a donor model - for example, an old ATV or a children's car, or you can make a frame yourself. If you chose the second option, an accurate drawing is required. When making it, take into account the possibility of upgrading the ATV in the future - the frame should turn out to be strong in the suspension. You can draw a drawing of the frame of a children's ATV with your own hands yourself or take an idea from the Internet. When making your own ATV frame, pay special attention to the quality of the welds. A square profile of 25x25 mm (or another size), as well as a ¾ inch pipe, are suitable as material for the frame.

Wheels

It is better not to save on wheels and buy new ones right away - go kart wheels or a set of wheels for a large garden wheelbarrow. For an older child, it is better to take wheels with a wide tread - they are perfect for off-roading. Spend some money on stamped discs - at least on the simplest ones.

An excellent solution for a children's ATV is rear-wheel drive from an electric motor through a ready-made or home-made gearbox. Think about the steering system - this will allow your child to easily cope with the ATV and increase its safety.

Engine and battery

These components are selected taking into account the capabilities and wishes of the young rider. There is no limit to imagination - from the screwdriver motor to infinity. It is important that the installed electric motor makes it possible to develop the desired speed - for kids, 5-8 km / h is enough, for older children it is interesting, of course, the speed will be needed more. When choosing a battery, consider its capabilities. It should be installed in such a way that the ATV would not need to be disassembled for recharging. You can use a battery from a donor scooter, uninterruptible power supply, or another suitable one.

When all the components are installed, take care of the aesthetic component - for the child, first of all, the appearance of his transport is important. You can use body kit elements from an old ATV or develop your own - it all depends on your desire, financial capabilities and availability of free time.

Do-it-yourself children's electric ATV is a pleasure for adults and a joy for a child from owning a unique personal transport. published

The ATV is a great off-road solution. It is popular with fans of extreme recreation, fishermen, hunters and everyone who needs to get into places where the car will not pass. This type of transport is easy to operate, has excellent cross-country ability and is quite stable while driving.

Factory ATVs are quite expensive, so craftsmen choose the economy option: they make such cars themselves. Of course, this solution is not for everyone: you need not only to have golden hands and the tools necessary for work, but also to be well versed in the structure of a car, motorcycle and the ATV itself.

If you have a strong desire to make this miracle of technology yourself, you should start with planning. It is necessary to decide on the models on the basis of which the transport will be assembled, and draw up drawings for them. It is imperative to think over what tools will be needed in the process of work and make sure that they are in good condition. No matter how boring this activity may seem, nothing will come of it without preliminary preparation. If for some reason it is not possible to make a drawing on your own, you should find a ready-made version.

Next, you need the sources. From a technical point of view, an ATV is a cross between a car and a motorcycle. Accordingly, you will need a motorcycle and a car to make it. It is optimal to select domestic models in the secondary market, it will be inexpensive, but the quality is quite satisfactory for the construction of an ATV. It is better to use a small car such as "Oka" or "Niva". Of the motorcycles, "Ural" is very popular for such purposes, you can take "IZH".

Technology

When the drawings are ready, the sources are purchased, and the tools are waiting in the garage, you can start making a homemade ATV. The life and health of people ultimately depends on the quality of work, so we must take our time and do everything consistently.

First you need to choose an engine and a cooling system. Usually, a motorcycle engine is used because it uses less gasoline and takes up less space, but you can also take a car engine. Since it can overheat in summer, it is better to take a model with air cooling, optimally forced (using a cooler).

The frame must be assembled so that the engine can be fixed on it. It will be in front or behind - it is not essential, the main thing is that it is securely fixed. There are two options here:

1. Make a new frame from scratch out of pipes. In this case, you must have equipment that allows you to bend the material.
2. Take the frame from the motorcycle as a basis, remove the excess and add the necessary.

Before making the final version of the frame, it is advisable to do spot welding and check the drawings.

How to make a do-it-yourself ATV based on a finished frame?

It is necessary to remove all unnecessary from it, leaving only the frame itself. The rear part is retracted, and the pipes are built up in the front, and the bridge is welded.

Further, spare parts from the car and additional metal pipes are taken, the best option would be plumbing. To make a frame for the body, you need a 70x40 pipe. Its length should be equal to or greater than the length of the spring, and its width should be the same as that of the bridge.

The cardan must be connected to the box using a rubber coupling, and to the bridge using flanges. The drive is easily done by hand using a chain from "IZH".

If you plan to install springs on shock absorbers, it is advisable to leave the rear swingarm with silent blocks.

After making the frame, it is necessary to fix the engine on it. The muffler can be used homemade.

Transmission

It must be mounted with high quality so that there is no backlash. The engine and drive can be removed from the motorcycle and the wheels can be used from the car. The trunk is easily made from thin-walled pipes.
There are two possible control options:

1. Using the steering wheel (in this case, the base is taken from the car).
2. With the help of the steering wheel from the motorcycle. The fuel tank is taken up with the steering wheel. For a homemade steering shaft, a 20 mm pipe with 2.8 walls is suitable. There should be a limiter at the bottom.

The suspension can be made either front or rear. In the manufacture of the rear, two options are possible:

1. The rear axle of the vehicle is used. It will need to be shortened. The construction will be heavy, but there will be a differential that is useful on the trails.
2. A gear-cardan design is used. A gearbox is mounted on the rear axle, and wheels are attached to the discs. This is a lighter suspension option for a DIY ATV. It lacks a differential, but this is not critical.

The front suspension is used from the motorcycle. You can make an all-wheel drive model, but this is a much more time-consuming job, and it also requires certain skills in turning.

The pendulum arms are positioned so that the engine is not caught when the ATV wheel is turned. If a frame from the "Ural" is used, the wheels should be moved further. Two bipods are welded to the steering column: on the left and right wheels. The front pillar should be tilted.

ATV with four-wheel drive

To make it, you will need a steering system from a car, a drive from a manual transmission, suspension and differentials. The suspension, like the steering, can be removed from the vehicle. The frame in such cases is cooked completely "from scratch", starting from the size of the engine of the future ATV. On the front suspension, take into account the space for the gearbox for the drive.

Using the products of the automotive industry purchased on the secondary market, it is possible to assemble vehicles for difficult roads and rural areas relatively inexpensively. One of the budget versions of the source is the Ural motorcycle, since it is inexpensive, has a rear-wheel drive and a four-stroke engine. Thanks to its positive aspects, it is popular.

A self-made ATV is not only a convenient and practical transport, it is a reason for pride and an opportunity to demonstrate your skills. Outwardly, it may be inferior to factory designs, but in terms of their technical characteristics, home-made ATVs are no worse.

Perhaps the only drawback (not counting the time spent, since a favorite business is never a burden) is the need to involve auto experts in order to obtain documents and be able to register an ATV.