Do-it-yourself knitting machine table drawings. Knitting machine table. Knitting machine table: how to create convenience and comfort at work

Table for knitting machine- a knitter's dream! So I was dreaming: maybe someday, my husband will have time, and he will also make such or a similar table for me ...

In the meantime, I have collected a photo, dimensions, so that there is something to start thinking about when the opportunity arises.

So, let's consider a novelty - a table for a knitting machine of the COMFORT series:

The table is made of high quality materials and fittings, has an original design that will fit into any interior and will not take up much space in your room.

The design of the retractable unit and its fixation will allow you, literally, in a few seconds to set the machine into working position.

You can work with one or two fountains.

The yarn is fed from the bottom up through a special hole in the shelf. This system allows for a better yarn release, and also eliminates the need to remove and / or change bobbins after the knitting process is completed. Along with this, you can install the spools on the hinged cover.

It is very convenient to place the coiler on the hinged lid.

On the middle shelf there are reels and accessories, and thanks to the pull-out system of the bottom drawer,

you will always have convenient access to any accessory.

Plastic containers will hold needles, weights, punched cards and other useful knitting tools.

It's not a secret for anyone that comfort in working with a knitting machine can be achieved only if all vibrations and vibrations are completely eliminated during the movement of the carriage. Therefore, we did not use traditional wheels in the table, but installed it on height-adjustable supports.
Also in the table for a knitting machine of the COMFORT series, a system of extending and fixing the machine is used, which allows you to securely fix the machine during operation.
Extension takes place along reinforced guides capable of withstanding loads up to 200 kg,
,
and fixation takes place across the entire width using a fixing panel, which is located on the back of the pull-out shelf.

The guaranteed service life set by our company for the pull-out mechanism is 10 years.

dimensions table (mm): width depth height
1200 420 940

Knitting machine shelf size: 1155x 220

Distance from shelf to floor:

Knitting machine chest of drawers

I saw enough of the dresser tables on the Internet, showed them to her husband. So he decided to pamper me. All the same, the machine is in the hall now .. With such a table it will be possible to hide it for a time when you are not knitting or you are waiting for guests.
In our city, it is now possible to order sawing and facing of laminated chipboard edges directly in the building materials store. They do it quickly, and the quality suits us.
The table is almost ready!

Our table was born in agony, there were many measurements, we looked at the photos of the happy owners of factory tables, argued about the height of the table, the height-width of the pull-out shelf-table top. I will share the drawings of our table. I mainly knit while standing, sit down when I do a large decing, raise the loops, etc. Convenient to me so. Well, extra gymnastics)))
I warn you right away, the drawings are rough, the dimensions are approximate. The final dimensions of the parts can be viewed on a scan from the nesting sheets. There are also two lines under the dimensions: they indicate how the ends are processed with a thin PVC edge of 0.5x19mm (dashed line) or with a PVC edge 2x19 mm (solid line). Well, they ordered another extra shelf, miscalculated, I crossed it out on the layout.

Pictures of Knitting Machine Table:

Assembled length: 1290 mm, Height: 875 mm, Depth: 490 mm

The table is delivered disassembled and occupies three boxes:
1 - 1300x780x90 mm / 50 kg
2 - 1300x500x60 mm / 20 kg
3 - 480x160x120 mm / 5 kg

Despite the fact that no complex operations are performed during assembly, minimal experience is still required.
For assembly you will need tools:

• Hammer
• Screwdriver and drill 2mm
• Medium Phillips screwdriver (PZ3)
• Slotted screwdriver small (0.5x3)
• Slotted screwdriver medium (0.8x4)
• 7mm spanner (or pliers)

If you have never assembled furniture before or do not have necessary tools, invite an assembly specialist.

Tables of the following colors are now available for order:

The shelf for fastening the knitting machine is located at a height of about 70 cm from the floor, extends 20 cm and is rigidly fixed in the extended position. At the same time, the canvas hangs freely, the knees do not rest, it is comfortable to sit and the carriages can be removed without touching the table walls.

There is space behind the pull-out shelf for storing accessories - weights, combs, etc.

The table rests on four rubberized wheels, making it easy to move around when needed. The front wheels are equipped with a stopper that blocks not only the rotation of the wheel, but also the rotation of the wheel module around the axis.

A laptop with a screen diagonal of 14-15 "can be freely placed on the top shelf.

The doors of the chest of drawers can be easily opened even during work when the canvas and weights are hung on the needles.

Bobbins or skeins of yarn can be easily stowed behind the pull-out shelf. After pulling out, more than 20 cm remains behind the shelf free space and the yarn is fed to the yarn guide completely freely.

You can interrupt work at any time. It is enough to remove the thread guide, the handle of the fountain shift and fold the handle of the upper carriage. After that, you can push the shelf with the knitting machine into place, fold the product on the shelf in front of the machine, and put the bobbins in the middle or bottom drawer.

Egger.
For the doors, smooth handles have been chosen, which yarn does not cling to.

Knitting machine chest of drawers

From the author: "I saw enough of the dresser tables on the Internet, showed them to my husband. So he decided to pamper me. After all, the machine is in the hall now. With such a table it will be possible to hide it for a while, when you are not knitting or you are waiting for guests.
In our city, you can now order sawing and facing of laminated chipboard edges directly in the building materials store. They do it quickly, and the quality suits us.
The table is almost ready!

Our table was born in agony, there were many measurements, we looked at the photos of the happy owners of factory tables, argued about the height of the table, the height-width of the pull-out shelf-table top. I will share the drawings of our table. I mainly knit while standing, sit down when I do a large decing, raise the loops, etc. Convenient to me so. Well, extra gymnastics)))
I warn you right away, the drawings are rough, the dimensions are approximate. The final dimensions of the parts can be viewed on a scan from the nesting sheets. There are also two lines under the dimensions: they indicate how the ends are processed with a thin PVC edge of 0.5x19mm (dashed line) or with a PVC edge 2x19 mm (solid line). Well, we ordered another extra shelf, miscalculated, I crossed it out on the layout.

http://volga64.blogspot.ru/2011/07/blog-post_4761....101972897#c7227987934543472638

Pictures of Knitting Machine Table:

Silver Seiko Co. Ltd.

Silver Seiko was founded in 1952 as Marukoshi Knitting Machines, Ltd.

In 1955, the company changed its name to Silver Knitting Machine Manufacturing, Ltd.

and in 1967 at Silver Seiko, Ltd. Silver Seiko Co. Ltd. located in Tokyo, Japan.

Knitting machine manufacturer silver reed official website: https://www.silver-reed.com/

China silver reed knitting machine factory: suzhou silver seiko co. ltd.

Knitting machine online store & knitting machine accessories online store

Brother Industries, Ltd.

1908 - the Japanese city of Nagoya, a simple artisan Kanekichi Yasui founded his own company.

The production began in a tiny family workshop for repairing sewing machines.

1925 - the Yasui brothers - inheriting their father's business, they named the company Yasui Brothers' Sewing Machine Company.

1934 - The company changes its name to Nippon Sewing Machine Manufacturing Company.

1941 - Creation of a new sales division of the company - Brother Sales, Ltd.

1947 The first delivery of Japanese sewing machines to Shanghai takes place.

1954 - The first Brother® knitting machine is launched on the world market.

2000 - end of history for Brother® knitting machines

B. Hague & Co. Ltd.

1860 - early reign of Queen Victoria, in a small workshop on the ground floor of the Nottingham factory,

Mr. Haig and his son Ben set up a small hosiery parts engineering company. Then they were joined by two students: Harry Schardlow & George Scott and in 1860 a small round was invented. sewing machine with protruding needles, its task was to connect the upper part of the stocking with the lower one, later it was called the kettle machine.

1866 - The first kettle machine was installed in a factory in Nottingham.

1895 Harry's son Frank Shardlow joined the firm and in 1901 George's son George Scotton also joined the family business and a new machine was invented called the Linker.

During the Second World War 1939-45, the production of the kettle machine was stopped. Most of the men were transferred to munitions and aircraft factories.

1957 Large 14-inch linker created.

1981 saw a boom in home knitting and a new handcrafted linker was developed by Robert Scott for the domestic market and exhibited at the Portsmouth Knitting Show, where it generated a lot of interest. The sales of this machine exceeded all expectations and the company experienced difficulties in meeting demand. An electric version was developed in 1987 and an updated version appeared in February 1990.

At the end of 1990, home knitting lost its popularity and production was suspended.

So, let's consider a novelty - a table for a knitting machine of the COMFORT series:

The table is made of high quality materials and fittings, has an original design that will fit into any interior and will not take up much space in your room.

The design of the retractable unit and its fixation will allow you, literally, in a few seconds to set the machine into working position.

You can work with one or two fountains.

The yarn is fed from the bottom up through a special hole in the shelf. This system allows for a better yarn release, and also eliminates the need to remove and / or change bobbins after the knitting process is completed. Along with this, you can install the spools on the hinged cover.

It is very convenient to place the coiler on the hinged lid.

On the middle shelf there are reels and accessories, and thanks to the pull-out system of the bottom drawer,

you will always have convenient access to any accessory.

Plastic containers will hold needles, weights, punched cards and other useful knitting tools.

It's not a secret for anyone that comfort in working with a knitting machine can be achieved only if all vibrations and vibrations are completely eliminated during the movement of the carriage. Therefore, we did not use traditional wheels in the table, but installed it on height-adjustable supports.
Also in the table for a knitting machine of the COMFORT series, a system of extending and fixing the machine is used, which allows you to securely fix the machine during operation.
Extension takes place along reinforced guides capable of withstanding loads up to 200 kg,
,
and fixation takes place across the entire width using a fixing panel, which is located on the back of the pull-out shelf.

The guaranteed service life set by our company for the pull-out mechanism is 10 years.

Overall dimensions of the table (mm): width depth height
1200 420 940

Knitting machine shelf size: 1155x 220

Distance from shelf to floor:

Knitting machine chest of drawers

I saw enough of the dresser tables on the Internet, showed them to her husband. So he decided to pamper me. All the same, the machine is in the hall now .. With such a table it will be possible to hide it for a time when you are not knitting or you are waiting for guests.
In our city, it is now possible to order sawing and facing of laminated chipboard edges directly in the building materials store. They do it quickly, and the quality suits us.
The table is almost ready!

Our table was born in agony, there were many measurements, we looked at the photos of the happy owners of factory tables, argued about the height of the table, the height-width of the pull-out shelf-table top. I will share the drawings of our table. I mainly knit while standing, sit down when I do a large decing, raise the loops, etc. Convenient to me so. Well, extra gymnastics)))
I warn you right away, the drawings are rough, the dimensions are approximate. The final dimensions of the parts can be viewed on a scan from the nesting sheets. There are also two lines under the dimensions: they indicate how the ends are processed with a thin PVC edge of 0.5x19mm (dashed line) or with a PVC edge 2x19 mm (solid line). Well, they ordered another extra shelf, miscalculated, I crossed it out on the layout.



The part number on the nest corresponds to the part number in the list.
The shelf rests on guides like this Full extension ball guides with door closer.
They push the shelf very far, Sergei shortened (sawed off) one of the details so that the machine does not outweigh the table) When we install the machine and try to knit on a new table, I will write it conveniently or not ..
In total, the table cost us 5 thousand rubles with a penny. Substantial savings in the family budget)
It can be compared with the prices in online stores and, and in fact, you also need to add delivery, and from Moscow to Altai it will not be cheap at all.

Pictures of Knitting Machine Table:

Assembled length: 1290 mm, Height: 875 mm, Depth: 490 mm

The table is delivered disassembled and occupies three boxes:
1 - 1300x780x90 mm / 50 kg
2 - 1300x500x60 mm / 20 kg
3 - 480x160x120 mm / 5 kg

Despite the fact that no complex operations are performed during assembly, minimal experience is still required.
For assembly you will need tools:

• Hammer
• Screwdriver and drill 2mm
• Medium Phillips screwdriver (PZ3)
• Slotted screwdriver small (0.5x3)
• Slotted screwdriver medium (0.8x4)
• 7mm spanner (or pliers)

If you have never assembled furniture before or do not have the necessary tools, bring in a professional assembler.

Tables of the following colors are now available for order:

The pedestal tables are made of high quality material from the German company Egger.
For the doors, smooth handles have been chosen, which yarn does not cling to.

So, let's consider a novelty - a table for a knitting machine of the COMFORT series:

The table is made of high quality materials and fittings, has an original design that will fit into any interior and will not take up much space in your room.

The design of the retractable unit and its fixation will allow you, literally, in a few seconds to set the machine into working position.

You can work with one or two fountains.

The yarn is fed from the bottom up through a special hole in the shelf. This system allows for a better yarn release, and also eliminates the need to remove and / or change bobbins after the knitting process is completed. Along with this, you can install the spools on the hinged cover.

It is very convenient to place the coiler on the hinged lid.

On the middle shelf there are reels and accessories, and thanks to the pull-out system of the bottom drawer,

you will always have convenient access to any accessory.

Plastic containers will hold needles, weights, punched cards and other useful knitting tools.

It's not a secret for anyone that comfort in working with a knitting machine can be achieved only if all vibrations and vibrations are completely eliminated during the movement of the carriage. Therefore, we did not use traditional wheels in the table, but installed it on height-adjustable supports.
Also, in the table for a knitting machine of the COMFORT series, a system of extending and fixing the machine is used, which allows you to securely fix the machine during operation.
Extension takes place along reinforced guides capable of withstanding loads up to 200 kg,
,
and fixation takes place across the entire width using a fixing panel, which is located on the back of the pull-out shelf.

The guaranteed service life set by our company for the pull-out mechanism is 10 years.

Overall dimensions of the table (mm): width depth height
1200 420 940

Knitting machine shelf size: 1155x 220

Distance from shelf to floor:

Knitting machine chest of drawers

I saw enough of the dresser tables on the Internet, showed them to her husband. So he decided to pamper me. All the same, the machine is in the hall now .. With such a table it will be possible to hide it for a time when you are not knitting or you are waiting for guests.
In our city, you can now order sawing and facing of laminated chipboard edges directly in the building materials store. They do it quickly, and the quality suits us.
The table is almost ready!

Our table was born in agony, there were many measurements, we looked at the photos of the happy owners of factory tables, argued about the height of the table, the height-width of the pull-out shelf-table top. I will share the drawings of our table. I mainly knit while standing, sit down when I do a large decing, raise the loops, etc. Convenient to me so. Well, extra gymnastics)))
I warn you right away, the drawings are rough, the dimensions are approximate. The final dimensions of the parts can be viewed on a scan from the nesting sheets. There are also two lines under the dimensions: they indicate how the ends are processed with a thin PVC edge of 0.5x19mm (dashed line) or with a PVC edge 2x19 mm (solid line). Well, we ordered another extra shelf, miscalculated, I crossed it out on the layout.

Pictures of Knitting Machine Table:

Assembled length: 1290 mm, Height: 875 mm, Depth: 490 mm

The table is delivered disassembled and occupies three boxes:
1 - 1300x780x90 mm / 50 kg
2 - 1300x500x60 mm / 20 kg
3 - 480x160x120 mm / 5 kg

Despite the fact that no complex operations are performed during assembly, minimal experience is still required.
Assembly will require tools:

• Hammer
• Screwdriver and drill 2mm
• Medium Phillips screwdriver (PZ3)
• Slotted screwdriver small (0.5x3)
• Slotted screwdriver medium (0.8x4)
• 7mm spanner (or pliers)

If you have never assembled furniture before or do not have the necessary tools, bring in a professional assembler.

Tables of the following colors are now available for order:

The shelf for fastening the knitting machine is located at a height of about 70 cm from the floor, extends 20 cm and is rigidly fixed in the extended position. At the same time, the canvas hangs freely, the knees do not rest, it is comfortable to sit and the carriages can be removed without touching the table walls.

There is space behind the pull-out shelf for storing accessories - weights, combs, etc.

The table rests on four rubberized wheels, making it easy to move around when needed. The front wheels are equipped with a stopper that blocks not only the rotation of the wheel, but also the rotation of the wheel module around the axis.

A laptop with a screen diagonal of 14-15 "can be freely placed on the top shelf.

The doors of the chest of drawers can be easily opened even during work when the canvas and weights are hung on the needles.

Bobbins or skeins of yarn can be easily stowed behind the pull-out shelf. After pulling out, more than 20 cm of free space remains behind the shelf, and the yarn is fed to the yarn guide completely freely.

You can interrupt work at any time. It is enough to remove the thread guide, the handle of the fountain shift and fold the handle of the upper carriage. After that, you can push the shelf with the knitting machine into place, fold the product on the shelf in front of the machine, and put the bobbins in the middle or bottom drawer.

Egger.
For the doors, smooth handles have been chosen, which yarn does not cling to.