DRIFT-TRIKE BATTLE BELARUS competitions were conceived to spread the drift trajects of culture, the main idea of \u200b\u200bwhich is the development and popularization of drift trajecting as a sports direction. There are the desire of the organizers in Belarus to achieve the level of European countries where drift traking is highlighted at a high level.

The organizers of this new destination are representatives of three teams from different cities of the republic, and the first competitions were held in 2018 in Minsk on one of the metropolitan autodromes.

It all started as usual, with disputes among the guys who cooler. From here and went the first name # igoroldift # Zamevvminsk #aCoroldift

Initially, the homeland drift tray is considered to be New Zealand, where the first riders began to descend from the vertices of the mountains, in the so-called downhill, on children's three-wheeled bicycles equipped with plastic wheels, because of which the adhesion was lost, and a drift appeared, he was drift.

In Belarusian trains, an internal combustion engine is installed, and the design is a kind of hybrid, where the back of the kart, and in front of the bike / motorcycle. A sliders that reduce the adhesion with the road are stretched on the rear axle over the kart wheels. They are made from PVC pipes. Engine power averages from 6.5 to 13 hp Motors are installed from karting, motoblocks, motor-pump, scooters and light motorcycles, although there are completely crazy models with an engine from a sports motorcycle with a volume of 1000 cm3.

The rules and regulations of the competition are almost identical to the rules of the automotive drift. Everything happens, as in a large motor sport: training, qualifications and paired races in the top. All this is evaluated by the judges.

Ilya Turchevich, Denis Belyanin, Andrei Dryuzhkov, was already trying as judges. This year, Alexey Mancheshevich will be added to them

This is what the site was told for the portal. One of the organizers of the competitions, which will be held within the framework of the exhibition "", which will be held under Minsk April 13-14 in the spheral of the TC site "Globus Park": "The race last year has shown a great interest in society in this sport. And the culture as a whole, so this year we decided to spend a series of tournaments at different festivals, and at the end of the season the final stage will be held, where the Crown of King Drift will be used to the best of applicants. Stages will be in Minsk, Gomel and Brest, according to the territorial location of the organizers and drivers drift traffic drift. There will also be summed up the total season and the best pilots and teams will be called. "

This year, Drift Trike Battle promises to become international, because the applications filed teams from Russia, Poland, the Czech Republic, Ukraine, saying such teams like Drift Trike Brest, Drift Trike Gomel, Drift Trike Minsk, Tornado Trikes, Ride, K & S Motorsport, VTK-Drift , DAV-Castoms and others.

In competitions, there may be absolutely anyone.

For the holders of trains and team members participation while free.

Also for participation, you can rent Trike in some teams. The cost of about 30 rubles. But it is necessary to understand that without the experience of driving, there is nothing to do there. For which workouts are held, as well as rolling of traits for rolling in free style.

The list of commands is formed, they can be viewed in official groups in Soc. Networks:

inst - drifttrikebattle.
VK - Drift Trike Battle Belarus
Facebook - Drift Trike Brest

Recall once again that the opening of the season will be held April 13-14, as part of the exhibition "MotojoExpo".

MotoLexpo - 2019.
VI-I am International Exhibition
Belarus Castom and Tuning Show - 2019

In a programme!
- Republican Motorone Opening Together with Iron Pride MC Motion
- Open cycle country cycle
- Open Championship of Belarus on cycling
- Open on Drift-Traking
- Open Castomasing Championship and motorcycle airbrushing
- Open Bicycle Castomasing Championship
- Exhibition Retro Mototypes
- Castom Drag
- Food Court and BBQ Fest
- Children's zone
- competitive program and speeches of groups
- Tat, haircuts
- Move is another ...

A bike for drift has three wheels, but it is not a children's toy. Truphite transport is very dangerous and requires long skills and driving skills.

Design features

The main feature of drift traits is their uniqueness. Very often, bicycles for drift are invented and personally made by extreme lovers.

Transport for drift is quite unusual.

1. As a rule, the front wheel is set to a small diameter - 20 inches, such as on the BMX models for the trial.
2. Two rear wheels have six times smaller size, in comparison with the front. Their width may exceed a maximum of two times the diameter. The most important thing is that they are made of solid and smooth material. Rubber tires on the rear rollers none of the drifters are dressed.
3. The racer sits very low in a wide chair. Each athlete personally chooses a comfortable seat. Behind the wheel of the homemade bike is comfortable to sit on the automotive tire.
4. For the supply of legs, supports are put on, closer to the axis of the wheel. As you can understand, through these levers, you can also manage the helm.

Pedals are not needed

Few people saw a real three-wheel track on the road, so most do not know how he looks. For this vehicle, the pedal is absolutely not needed. All pleasure from drift riders get on a slope from a slide. While it will be reasonable to use the help of the car in a slide. For example, as a strap from the American town hooked for their van.

Twger pedals on, you can accelerate to very low speed - no more than 25 km / h. Then the most exciting tricks on the trash are performed at a speed of more than 60 km / h. Extremes on the highway with a lively movement rotate, like a yula, fall on the side, famously draw a snake on the roadbed.

Drift Machines with Engine

Often the factory assembly bike for drift is relatively expensive. Especially if you consider that there are trains with a drive from the engine.

Transport for Drift Big Wheel Drift Trike with Engine

The Machine called Big Wheel Drift Trike produces the American company SFD Industries, specializing in the production of auto parts. This machine is equipped with a compact gasoline engine capacity of 6.5 hp. He has a 26-inch wheel at the front, and there are two 3.5-inch wheels behind. Replaceable plastic tubes are put on the rear wheels, so that the rollers themselves are not erased when sliding.

The cost of the train with the engine is equal to $ 2,000. For an extra charge of $ 200, a more powerful motor can be delivered. Plus another 200 dollars, and you change the throttle system.

The attitude of the law for the fad

Interestingly, in the Russian legislation, Trimk for drift belongs to ordinary bikes. In the rules of road traffic, the distinction between three-wheel bikes and more common two-wheeled is not established. Consequently, no registration and right to it is needed.

It is worth noting that drift on a bicycle is a very dangerous entertainment. Often Extreme lovers chase on roads with open traffic cars. While athletes organize their competitions on pre-closed asphalt tracks.

In America, very often drifters on bicycles chasing the road police, in what you can make sure that the first half a minute videos are viewed.

Homemade drift traction

First you need to have a bike that is not sorry to start under the saw. In addition, the choice of a bicycle for disassembly is limited to models with small wheels with a diameter of about 20 inches. It is suitable as a children's bike and BMX - bike for motocross. For the manufacture of self-made transport for drift takes the old one, but a strong horse "Kama". This bike has a fairly strong central tube frame to welding a non-standard rear chassis to it.

Basis for Drift Bike - Folding Bike "Kama"

Front wheel, plug with a wheel, steering sleeve, that is, the entire front part, up to the carriage node, is used in its original form. Season tube, upper rear feathers are cut off under the root. In the simplest version, left behind the bottom feathers at your own place. They are placed on the basis of plywood for seating. Obviously, such a pit stop homemade is no good strength.

In a good way, the rear axle should have a double safety margin in order to withstand the weight of your body at dynamic loads. For the assembly of the reliable frame, the pipes with a diameter of 18 and 32 mm will be needed.

On the Internet, from a variety of all sorts of tractures, you can choose the one that will most like you. The drawing drawn on the scale of 1: 1 will facilitate the frame assembly. On the drawing decomposed on the floor, as in a sketch, it is convenient to collect individual structural elements.
People with a good eye eye can ignore this item.

It would be nice to have pipe bender. With its help it is easier to collect an unusual bike with your own hands. You can, of course, do not complicate the work, but to assemble the rear frame of the buggy from straight pipes. But if there is pipe bending, then you can bend pipes for a more advanced frame, for example, to make arcs in the corners to strengthen the design. From the tools, in any case, you will need a welding machine.

After the end of the welding work, two small wheels are needed to try on the finished frame. They can be taken ready, for example, from the cart, or cut out of wooden bars. The size of the wheels are selected as follows: the width is 3.5 inches, the diameter is approximately the same. To make the rear rollers better slide, they wear a segment of a polyvinyl chloride tap pipe of a large diameter.

Homemade Wood Wheels for Drift Bike

To restore the legs, the easiest way to turn the pegs on the front wheel axis, and you can welcome two pieces of pipes on the feathers forks. In general, the work is creative and, definitely, fascinating.

After assembling the rear chassis, you can set a comfortable seat, which can serve as a plastic chair or a small chair. You can do and automotive covers, as the young inventor from Lipetsk did.

After test races, correct small errors, more precisely, you caress the Trike for yourself. If necessary, we draw the welding seams and in the final stain.

First coach

When Trike is ready, I want to get the maximum pleasure from him. No matter how injecting you to ride, imagine what can happen when entering it in the pothole. Always when drifting in the pit drift bike turns over. Without equipment when falling at high speed, the ride is erased about asphalt, like an eraser. It is possible to safely drift on a bike on a familiar road and in motorcycle protection.

It is necessary to warn that you will not succeed unnoticed on the wonderful thing. Someone will be modestly seen, some will be throne to scream, someone will laugh and turn your finger at the temple. Ride and be the center of attention!

Drift Trakhk Kseto is adrenaline!
Kseto Drift Trike - for all drift lovers!

Briefly about Electric Drift Track Kseto:

The new product from the company MK Prokat under our Kseto brand is the electric drift trail. First of all, we do not leave the concept of our business and customers offer exclusively electrical products, as this is not the fact that this is the present. And the use of electric trach is much more convenient than gasoline. The model we offer is, first of all, the quality of components and an excellent appearance. The powerful motor and capacitive battery will allow you to have a long time to enjoy drift. We offer 3-version drift trades Kseto with different power of the motor. Motor power 500 watts, 1000 watts and 1500 watts.

Who is interested in the electric drift traction Kseto:

All fans of speed and adrenaline. Drift Trike can be used to create a business for renting and renting an electroscuter for drift, both in a stationary platform and on exit events. Karting centers can expand the range of their services by providing clients with this novelty. All others can be perfectly used Drift Trike for emissions of their adrenaline and getting strong emotions.

Drift Trike Kseto. Steel housing and fork of aluminum alloy

Drift Trike Kseto. Powerful and reliable lithium ion battery with controller

Drift Trike Kseto. Battery easily removable

Drift Trike Kseto. Convenient seat

Drift Trike Kseto. Screen with battery voltage (battery charge)

Drift Trike Kseto. Wheels shoes in PVC overlays 10 mm

Technical characteristics of the electricCCer Drift Trike Kseto:

• Frame - Steel
• Front fork - Aluminum alloy
• Brakes - disk 160-200 mm
• Mileage on one charging - 40-50 km
• Speed \u200b\u200b- 35-40 km / h
• Front wheel - 20 "* 2.125 kenda; rear wheel of aluminum alloy - 10"
• Front Width Hub - 100 mmm
• Rear wheels in hard PVC drives per 100 mm
• Motor - 48V, 500-1500 watts
• Rechargeable battery - 10-20 amps / h, removable
• Charger - 2 amps / hour
• Convenient seat - Skin. High Quality Replacement
• Weight - 40 kg
• Design - consists of two parts

Buy Drift Track Electric Kseto.drift trike With a guarantee in the offices of Yekaterinburg and Moscow or free shipping to any city of Russia, Kazakhstan, Belarus and Armenia.

Telegram Phone, WhatsApp, Viber, Telegram: +7 922 202 12 51

This is a truly spectacular sport, rollers with drift are gaining hundreds of thousands views on Yu-Tube.

As a rule, the drift on the bike is made during rolling rolling, the car is most often used for lifting back. This bike resembles a children's tricycle, but its main difference in the lowered seat. The following signs are allocated:

• A small front wheel and 6 times less than its rear;
• On the rear wheels there are no rubber tires;
• It happens drift-trich with the engine.

The pedals of such a bicycle are practically not allowed to move, since with their help you turn up a maximum of up to 25 km / h, and for the execution of the tricks you need to go at least 60 km / h. Turn and pass back you need no need.

Drift Tryk with a motor - expensive pleasure, its price comes to 2 thousand dollars. In this case, the engine, as a rule, has a power of 6.5 hp. It will not be possible to save, this will affect the quality of the model. The only way out is to assemble the bike yourself.

At the same time register Trike, as a vehicle, the legislation does not require, because it is still a bike.

In order to collect Drift Tryk with your own hands, you will need an old tricycle that will not mind to disassemble. The first thing to do is prepare drawings. Be careful, it depends on them how safe will the drift on the bike.

Blueprints

In the drawings, you need to read all the details and calculate their exact size. You can do it yourself or find the ready scheme on the Internet. Do not avoid viewing several dozen drawings. Focus on those spare parts that have.

After you have made a drawing, you can start collecting Tyk with your own hands.

Take the old bike. Get rid of the pipe under the seat and the upper wings over the rear wheels. Be careful: do wrong - you have to look for a new material for your vehicle. At the bottom wings, attach a sufficiently dense board. For the frame, pick a strong pipe with a diameter of centimeter in 3. Bend them in the form of arcs and secure them with each other. To build the frame, you will need special tools, in particular pipe bender and welding.

Rear wheels Make out of wood or remove them from some trolley.

The seat can be made of a tire or part of a plastic garden chair. The main thing is that you feel comfortable.

You can collect the trap yourself and the motor, to do this, use the MAP motor.

Buy new spare parts for nothing, use the used software, it will practically not affect it, but it will help reduce costs.

And remember, riding in crowded places and on the roadway, you are at risk not only yourself, but also around. Come to the choice of places for drift with extreme caution.