Motor oil Ford. Recommended motor oil for Ford Focus Which oil to fill in the engine FF2 1.6

the main / miscellanea

The current year for our country has become the year of the warranty on almost all Ford Machines, which were implemented before the crisis. The overwhelming majority of these machines are serviced at informal technical inspection stations - however, as it should be expected, the level of qualifications of local specialists is much lower than the official dealer. And so you have to hold your faithful "iron horses" on their own forces to choose consumables, as well as technical fluids. The thing is that the replacement of the engine oil is the most, perhaps, a frequent maintenance procedure and the correctness of the choice of this product should be performed.

What is offered in assortment?

Most modern manufacturers of motor oils presented several varieties of it on the market. Different varieties among themselves by:

  1. SAE - viscosity
  2. ACEA - operational properties.

Only with the information about the necessary variety, you can pick up the oil for Ford Focus 2. It will also be necessary to take into account a lot of recommendations that the automaker itself gives it directly relate to the issue of the selection of machine oil. Ignoring such recommendations (especially this is true for modern, technological, very sensitive to technical fluids of motors) leads to a significant reduction in engine resources, as well as individual systems and parts.

Tolerance from the manufacturer

Finding the required type of oil for Ford cars significantly simplifies the presence of admission from the automaker. It is very convenient - after all, the car owner, in this case, will be able to choose the oil for the engine of a particular model. The most important thing is to stick to the labeling. In other words, the tolerance numbers must coincide with the numbers specified in the operating instructions for the focus 2.

What are the questions?

Of course, almost every car enthusiast, choosing engine oil, faces a huge number of questions. Here is some of them:

  • What type of engine oil from the assortment proposed by the consumer can protect the new engine from wear?
  • Is it possible to reduce fuel consumption with competently selected oil?
  • What kind of oil is preferably used for a worn engine?
  • What oil is used for a sports ride?

Before giving answers to the questions presented above, it must be said that the engine oil affects:

  1. Motor resource
  2. Engine efficiency
  3. Dynamic overclocking
  4. Catalyst resource.

In order to ensure the maximum protection of the Ford Focus 2 engine, it is necessary to use oil that is manufactured using effective additive packages. Thus, it is possible to realize the entire potential of the engine in the manufacturer.

We classify the types of engine oil

In fact, the varieties of engine oil is not so much - "mineral water", "semi-synthetic", "synthetic". However, choosing the type of machine oil, it will be necessary to remember, first of all, the recommendations of the company Ford. There were such cases when oil incompatible with a new design was also floodied in the Focus 2 model. Point first - SAE viscosity The most main characteristics of the engine oil is its viscosity. It is from her that the ease of cold launch of the engine of focus 2 in the ladder Russian frost will depend on it. This specification applies everywhere - moreover, it is an international standard. For your Ford Focus 2 you need to purchase three machinery canisters - all-season, summer and winter. Winter oil manufacturer denotes the letter W, as well as the number standing in front of it. For example - 10W, 20W, 25W, 5W. Summer engine oil is devoid of letters and is denoted by the number only - 20, 40, 50, 60. All-season. We are talking about a certain combination of the designations of winter and summer species. For example: SAE 10W-40.

Let us turn to the manufacturer

In the first part of the article, we widely revealed the general questions of the choice of engine oil for your Ford Focus 2 - now it's time to contact the manufacturers of this indispensable for each product of the product. Actually, it opens our chart-parade of the best representatives of the automotive market:

Mobil 1.

Only five years ago, no one doubted that Mobil 1 is the best engine oil of modernity. Many owners of previous versions of Ford Focus 2 flooded in the engine Mobile and did not complain about the result. The main competitor Mobil 1 - ESSO engine oil, however, as experts noted, the product of this brand is more suitable for Korean cars. For anyone who loves to "strive" on the free track - only Mobil 1. There are a lot of additives that constantly support the car engine in the required tone (increase in compression and cold start including). Yes, it is Mobil 1 that poured into many truly expensive car brands. The craft masters recommend pouring into the engine of the Ford Focus 2 Mobil 1 Rally Formula 5W - 40 engine, however, this variety is very rare and find it is very and very difficult. Over the years, Mobile, due to the large number of fakes on the market, several painted prestige among motorists, but its positions remain strong and indishes.

Castrol

The European Machinery Castrol Machine oil is very like - it is at the factory, such giants like "Peugeot" and "Renault". The oil on rarity is successful and high-quality, on the Internet, the disputes still flared up, which oil is better - Castrol or Mobil 1. Recently, this company has raised the quality bar very much, there is no place to work on the engine with this oil in principle. Today, a new line of engine oil is released on the market - EDGE and, judging by the reviews, it is an excellent and high-quality product.

Shell Motor Oil for Ford Focus 2

Our list will start a review of the final, third challenger. Of course, modern oils are much more, but we will dwell only on these three brands - according to the owners of Focus 2 and specialists from the car operators, it is these oils that are recognized leaders of the modern market. According to rumors, Shell's trademark has not so long ago has concluded a contract for the supply of motor oil to the production of elite Italian supercars Ferrari. Even if it is not more than a duck, the product Shell a very worthy candidate that deserves attention. When using this oil on Ford Focus 2, the cold start of the engine is significantly improved.

Instead of output

What should I say? First of all, I want to emphasize the need to choose which oil that you need your car. Sports versions of Castrol or Shell pour in Ford Focus 2, by and large, no sense. Yes, there are a large number of additives, however, on the standard versions of this popular car, they practically do not give a tangible effect - but, at the same time, the cost of this product is very, very high. The average focus holders 2 can be recommended to recommend the type of oil 5W - 40. Of course, you can purchase a product and cheaper than brands presented above, but each car owner must be kept in the head that good oil is a deposit without the problematic and long operation of your car engine.

Ford Focus of the second generation is one of the most common budget cars in Russia. Despite the fact that the second generation is not produced for a long time, these models are still often found on the streets of cities. The car has proven itself from a good side. This is a reliable and economical car for every day. But that the operation does not become a burden, it is necessary to regularly make maintenance. One of these operations is to replace the oil on Ford Focus 2. But the replacement is just half an end. In order, the engine served for a long time, you need to know which oil is suitable for a particular power unit. Well, let's deal with what oil is better for the Ford Focus of the 2nd generation.

What are pouring from the plant?

On the focus conveyor, there was a semi-synthetic oil, which corresponded to the tolerance of the Ford WSS-M2C913-A. As for the brand, it was the product "Formula F" with a viscosity of 5W30.

This oil has a whole complex of additives that are so necessary when running a new power unit. But the time does not stand still, and now the second "tricks" are no longer produced. So what oil for Ford Focus 2 (1.8) will be the best? There are a lot of options.

MotorKraft Full Synthetic (USA)

Owners of diesel "focus" note: Suitable "MotorCraft Full Synthetic" only for gasoline engines.

As for viscosity, it is the same - 5W30. With such characteristics, the product does not hush strongly in the frost and perfectly feels in the summer. This oil is suitable for both southern and middle regions. But for those who have winter lasts more than four months, it is recommended to go to 0W30. This is a more liquid oil with which the cold start will be less difficult.

"Castrol"

This is a European brand. All French cars go on this oil, and it is not contraindicated for "focus". Judging by the reviews, the products from "Castrol" features high quality and detergent properties. This is especially noticeable on engines with mileage for 200 thousand. The product perfectly flips all dirt and accumulated deposits. Among the disadvantages reviews are celebrated higher costs. The product price is 5.5 thousand per five liters. American "Motor Kraft" costs 30 percent cheaper. Also on MotorCraft make less fakes.

But the counterfeit "Castrol" in the domestic market is enough with his head - they say motorists. When buying, you need to carefully look at the inscriptions and not buy canisters with incorrect fonts and curve dimensional lines. What kind of oil for "Ford Focus" of the 2nd generation pouring? If we consider the "Castrol" line, then experts recommend using the EJ line with a viscosity of 5W40. This is a pure synthetics, but also have semi-synthetic. This is "Castrol Motogany" 5W30. As practice shows, it is not worse than the previous one - the same wash the dirt and does not hush it in winter.

Other options

Are there any analogues? Their mass, but most use the following products:

  • "Motul" 913c. This is a semi-synthetic product with a viscosity of 5W30. One of the most cheapest listed. The cost of five-liter canister is 2.5 thousand rubles.
  • Shell. One of the advantages is that the oil is suitable for any season. With him the car perfectly feels like in the winter and summer.
  • "JB Jerman Oil Ll hopped." This is a synthetic oil. Sold in four-liter canices. Cost - from 2.5 to 3 thousand rubles. There are options for both gasoline and diesel engines.

How much to fill?

Along with the choice of brand, motorists are wondering the amount of lubrication. Since different motors were installed on the "focus", the volume of the product fill in will differ. Let's start with the smallest motors. These are 16-valve aggregates 1.4 with gasoline injection. It is recommended to use 3.75 liters of oil. The same digit and in 1,6-liter diesel engines. But the gasoline 1,6-liter aggregates of Duratek need more oil. For replacement, 4.1 liters of product will be required. The 1.8 engine is designed for 4.25 liters. For two-liter gasoline-powered motors, it is recommended to use 4.3 liters of oil. But in the turbodiel engine 2.0 it is already pouring already 5.5 liters.

What if it is not possible to measure the volume?

If the oil is poured right from the barrel, it is possible to determine the norm by Schu.

Specialists say that the level should be average or higher. But it is worth remembering that a lot of oil also harms the motor, like his absence. It is necessary to adhere to certain norms.

About transmissions

Along with the engine, you should not forget about the transmission. This is an equally important unit after DVS. The second generation of "Ford Focus" was established both mechanical and automatic transmissions. Let's start with the first. On the manual transmission of oil from Ford Focus 2, every 75-90 thousand kilometers should be made. No more than 2.2 liters of oil poured into the box (although the full volume specified by the manufacturer is 2.8 liters). As for viscosity, the product 75W90 is usually chosen. Manufacturers can be different. The most popular - "Mobile Mobybalone 1". Despite the high viscosity, this product performed perfectly in the northern regions. Owners in reviews do not complain about the work of the transmission - in additional warming it does not need. The cost of the product is 800 rubles per liter, which is quite acceptable. Also, motorists use "Castrol". However, it costs more expensive - from 1.2 thousand rubles per liter. For quality, these two brands are identical, so there is no point in overpaying for the brand.

What else can oil in the box "Ford Focus 2" pour? For those who want to save yet, not to the detriment of quality, experts advise to consider Eneos Gear 75W90. However, the reviews say that the product is afraid of frosts. It follows only in a temperate climate, otherwise you can spoil the box. The boundary threshold of operation for Enios Gear is minus 20 degrees. What kind of oil love is for its price. One liter costs 375 rubles.

Replacing oil in automatic transmission on "Ford Focus 2"

Automatic transmission has a completely different principle of operation, so oil is different here and viscosity, and according to specifications. Instead, ATP-liquid is used here. It can be recognized by characteristic red color. What product should be chosen? Specialists advise using the original Merkon V oil. How many liters will required? It all depends on the method of replacement:

  • With a partial method of replacing the oil into the Ford Focus 2 automatic transmission, about five liters of fluid will leave. Usually this method is used by those who serve the car with their own hands.
  • If hardware is used (that is, a complete replacement), you must have at least ten liters.

The cost of the procedure, taking into account the work and materials, is 12 thousand rubles. When hardware replant, experts produce disassembly of the pallet, cleaning filters and magnets, as well as lubrication of fittings. Back the pallet is installed on the sealant (the old one is previously removed by the knife).

Upon completion of the operation, a jump is possible at idle. But after two or three minutes everything stabilizes is a normal phenomenon. By time, the hardware replacement takes no more than half an hour. And with a partial replacement, you can give about three hours. Plus, everything in a thousand kilometers will again have to break the pallet and merge oil. When hardware replant, the following maintenance will be required only after 60 thousand kilometers. It is this figure that is the regulations for replacing ATP fluid into the "Focus" automatic transmission.

So, we found out how to choose oil for Ford Focus 2 into the engine and gearbox.

Ford Focus of the second generation is a very popular car in the Russian market. The car was in demand all over the world - this was facilitated by the optimal level of comfort and manageability, as well as high quality of manufacture, long interceservice interval and unpretentiousness in service. But like any other mechanism, even a high-quality car must be serviced in a timely manner, to carry out that according to the regulations, etc. For example, fill oil into the engine. This is one of the simplest and, at the same time, important procedures that have positively affecting the service life of the motor. Let us consider in more detail what to pay attention to when choosing an oil for Ford Focus 2.

Child Nuances

As is known, the engine oil in Russia is considered one of the most sought-after consumables for the car under consideration. Naturally, you need to regularly replace the oil to ensure normal engine operation. If you do not follow the elementary rules specified in the instructions, you can face irreversible consequences, up to the overhaul of DVS. Let's try to figure out what the most important oil parameters should be considered.

Factory Oil

Interesting is the fact that Ford Focus 2 came from the conveyor with high-quality Ford Formula F oil. It is forbidden to merge or change to the first one. The fact is that the factory oil has special additives necessary to host the components of the motor during the run period. So, the onset of the first regulatory should be waited, and only then change the oil to the factory, or to another. Naturally, the first replacement of oil is better to spend in the Ford Dealership Center. In the case of self-service, you must adhere to the manufacturer's recommendations.

What does the engine oil affect

Original engine oil has a positive effect on:

  • Motor resource
  • Reducing fuel consumption
  • Dynamics
  • Reliability of catalyst

Based on this, we can conclude that it is possible to reveal all the advantages of the Ford Focus 2 engine only when using high-quality oil. It will not be superfluous and an option with additives that will allow to further reveal the potential of the power component of the car.

Types of oils and their differences

Motor oils differ in terms of viscosity (SAE) and operational properties (ACEA)

Marking and admission

Not mistaken when choosing a suitable oil will help the labeling and admission set by the American concern Ford. These parameters are indicated on the product label. If they correspond to the numbers specified in the operating instructions, then the oil is suitable.

Periodicity of oil replacement

"Blood" car system is replaced once a year or every 20 thousand kilometers. Suppose the car drove 20 thousand km after three months - it means it's time to change the oil. Or, on the contrary, when for one year of operation, Ford Focus 2 drove only 5 thousand km - in this case, it is also time to change the oil.

Tip: Experienced motorists, often operating a car in urban environments, recommend pouring oil every 10 thousand km.

Oil classes:

  • Mineral
  • Synthetic
  • Semi-synthetic

In this case, you can advise synthetics or semi-synthetic, but the exact answer will give a manufacturer

Types of oils:

  • Winter
  • Summer
  • All-season

We note that on the packaging of the winter version there should be a letter w, which is usually preceded by a certain number. As for all-season and summer option, they are indicated by numbers.

Select Oil

To date, the car oil market is quite wide and diverse. Therefore, it is impossible to give an unambiguous answer, the oil of which brand will be most preferable for Ford Focus 2. It is much more important to first pay attention to the parameters, and then consider brands.

As written above, the optimal option will be completely synthetic oil - if only because Ford Focus 2 gets such a lubricant at the factory. Synthetic has excellent lubricating properties, and has an optimal viscosity. Alternatively, you can recommend synthetics with additives - for even greater effect.

Pluses of winter oil

  1. Reliable work and quick engine launch in low temperatures
  2. Winter oil remains liquid even in cold weather, while the starter and battery have a smaller load
  3. Synthetics has high fluidity, and due to this quickly applies to all components of the engine. This allows you to avoid the "dry" engine friction
  4. Thanks to this oil, the motor warms up faster, and due to this, you can almost immediately start moving
  5. Synthetics prevents the motor overheating even in hot weather, since the engine warms only to operating temperature - no more and no less

The best oil producers

Ford approved for Focus 3 a large number of oil producers who have a special certificate. Consider the most sought-after brands in terms of price and quality ratio.

Castrol

The oil of this company enjoys wide demand from almost all European motorists. For example, automakers from France produce their cars only with Castrol oil. This is innovative products, to whose quality claims and can not be. In addition, the manufacturer constantly improve its oil, and thus raises its authority. Among the innovations of Castrol, we note the new EDGE oil - it is optimal for the price and quality, and is ideally compatible with the Ford Focus 2 engine.

Mobil 1.

The advanced product that approves all Ford Focus owners 2. Mobil 1 raised the quality bar for ten years ago, and then this oil was not equal in the market. The advantages of Mobil 1 is that it contains a large number of additives that have a positive effect on the nature and reliability of the car, especially when driving along high speed. Unfortunately, there are many Mobil 1 fakes on the market, so it is necessary to be attentive. The best Mobil 1 oil is the version of Mobil 1 Rally Formula 5W-40, which is well optimized for Ford Focus 2. Naturally, such an oil is not cheap, but it is among the best oils in quality.

Shell.

A decent alternative to Mobil 1. The oil from Shell is cheaper than its nearest competitor, and at the same time is great for Ford Focus 2. Such oil provides a quick start of the engine even in a bodied frost. Therefore, it is not surprising why dealer centers recommend to fill the shell.

Video


The popularity of the Ford's brand in Russia is no doubt. Ford Focus Oil 2 is the most popular automotive industry, and the procedure of oil change itself is one of the frequent regulatory work of the car service. For high-quality engine operation, it is necessary to regularly shift or tall oil. It is necessary to do it exactly with the manufacturer's recommendations, otherwise it is not to avoid serious breakdowns of your car's power unit.

Modification Oils for Ford Car

After departing from the Ford Focus conveyor or Ford Focus 2, the half-synthetic Motor oil Ford Formula F is flooded in. Oil change is not recommended to the manufacturer to first then, since there are already special additives in the lubricant for normal adaptation of the power unit.

If the car service takes place in the car service, then there is no concern that the oil that does not match the type of engine will be flooded, be it Ford Fusion or Ford transit diesel. In the case of self-replacement of the "circulatory system", a number of simple rules should be observed. Motor oils must match the Ford WSS-M2C913-A and FORD WSS-M2C913-B specification.

For example, the Ford Focus or Ford Mondeo Ford Formula E 5W-30 can be replaced by Ford Formula E 5W-30, and without mandatory procedures for washing the system, for the latest generation Ford Formula F 5W-30, which is poured into the Ford Focus 2 power units 2 and Ford Mondeo 4. Change the oil filter is also not required.

Properly selected oil affects 4 main engine indicators:

  • catalyst resource;
  • dynamics of overclocking;
  • motor resource;
  • efficiency of the power unit.
Shell 5W-40 oil is most suitable for Ford cars

Under the certification of the Ford company there is a sufficient number of manufacturers of motor oils so that you can make a choice between the optimal price-quality ratio. The most expensive option for Ford Focus 2 will be shell 5W-40 oil. It significantly improves the start of the cold engine. If the price question is not principled, then this is what is needed for the Russian winter.

The average price segment will take oil from Castrol 10W-40. The qualities of this product are positively evaluated both professionals and motorists. The new EDGE line raises the quality bar to an even higher level. The budget option for Ford Focus 2 will be the oil from Mobil 1. Additives contained in Mobil 1 Rally Formula 5W-40 oil, perfectly retain the engine from Nagara and give a light start in frosty weather.

The choice is always there, and it pleases. The price range is wide enough. And its lower limit is not limited only by the represented stamps. For the Ford Focus 2 engine, the 5W-40 ratio is perfect. And theoretically you can find the manufacturer of such an oil and at a lower price. However, it is worth remembering that the quality of the oil is the key to the long and uninterrupted operation of the power unit of your vehicle.

Features of oil replacement

To comply with the conditions of warranty, the first 3-4 years maintenance of all Ford models: Ford Fusion, Ford Mondeo 4 and even diesel ford transit occurs in service centers. The replacement of Ford oil is made on each of the qualified professionals. In the future, to save auto maintenance, you can change the lubricating fluid of the power unit yourself.

The characteristic distinctive features of this technological process is a bit. With a strict execution of the sequence of steps, even independent replacement without the presence of the appropriate experience will be easy and productive.

    1. Preparatory work includes an arrangement of the replacement location, be it a garage, a lining or observation pit, and the preparation of a container for collecting waste liquid (5-6 liters).
    2. The car is fixed with a manual brake when replacing on an uneven surface, using a boogue and jacks. You must additionally pave the wheels with bricks, since the safety of the work should be above all.
    3. Open the oil cover of the engine.
    4. We dismantle the protection of the crankcase. Complete set of Ford Mondeo 4, for example, has 5 bolted mounts.
    5. We unscrew 2 bolts of 17 mm from below and 3 to 13 mm front mount.
    6. Gently remove the nuts cooked with the plates, through the oval holes on the crankcase.

Remove the oil filter must be carefully
  1. Remove Carter to the side. Care should be taken here, since the engine and oil inside it can have a temperature above 40 degrees, which, when contacting the skin, will cause burns.
  2. Weakening the plug plug.
  3. We set the pallet under it and completely turn away.
  4. We are waiting until the oil is completely soles.
  5. Outlook the oil filter. It is worth the caution, it may be there an oil residue.
  6. Once all the oil is fused, install the plug back, without forgetting to change the sealing ring.
  7. Before installing the new filter, it is necessary to lubricate its sealing ring with new oil.
  8. Screw must be screwed until the sealing ring is touched by the cylinder block, then we make another turnover, maximum ¾.
  9. Now oil replaced, 3-3.5 liters.
  10. We close the oil cover of the engine.
  11. We carry out a trial start and check all the nodes for leakage.
  12. The moach motor and once again check the fluid level.
  13. Install the Carter in the reverse sequence.

Saving funds when complying with the described sequence of oil replacement stages will be from 1000 to 2000 rubles.

Replacing oil in diesel engine

Unlike Ford Fusion, which comes in the Russian Federation only with a gasoline power unit, Ford oil transit diesel will be completely different. Ford transit diesel Oil pump is located directly on the front plate of the engine. The main problem is that fuel in Europe is very different in quality when compared, for example, with fuel from the Russian Federation.

For gasoline cars, such as Ford Fusion, it is less relevant. The percentage of sulfur in a stuff varies multiple. In the EU countries, the permissible norm is 300-400 units, and in Russia it is about 6500. The cetane number 55, compared with 48, strongly increases the engine wear, and correctly selected lubricant in such a situation plays the last role.


Lower lubrication will extend the life of the engine

Ford manufacturers are recommended for diesel units with a small alkaline indicator (TBN). This rule works well in European countries, but when the motor is working at the temperatures of the Russian winter and with the quality of domestic fuel, the engine wear is 1.5-2 times. Industrial tests also showed an oil efficiency with a higher alkaline number to work in conjunction with the sulfur-containing fuel.

Here is an enlarged stroke reserve before changing, and the preservation of all properties of additives throughout the work, as well as the detergent effect. When choosing between universal and diesel oil, you should not even think about it. Ford tests at the landfill in Turkey gave a clear result. For the Russian climate, it is worth considering the work in the winter when warming up in winter, as well as the launch of cold, up to -35 ° C, engine.

The results of the studies can be partially transferred to gasoline engines. And for refueling Ford Focus 2, taking into account weather conditions, use oil with a higher alkaline number. Otherwise, it is easy to increase the interval between fluid replacements.

By bringing all the information reviewed, let's point point at key moments. After the purchase of Ford Focus 2 or any other Ford brand car, the oil replacement should be carried out not earlier than the first technical inspection. The factory liquid in the power unit already contains the entire necessary complex of additives that allow the engine to start a full adaptation to the loads.

If you need to change the engine oil, compliance with Ford WSS-M2C913-A and Ford WSS-M2C913-B standards is required if the resource and quality of the engine operation are prioritized. Basic brands for use in Ford Motors - Formula F from Ford, Castrol Magnatec, Mobil Super 3000, Mobil 1 x1, Motul 8100 Eco-Nergy, Xenum VX and VXR.

An independent replacement is not as complicated, as it seems. In the absence of a mandatory condition for warranty service in the dealer center or expiration of the warranty, an independent replacement will significantly save the budget. Even Ford oil transit diesel can be replaced independently. If there is a passenger car from Ford in the garage, follow the step-by-step instructions described above.

Due to the low quality of diesel fuel of Russian production, oils for diesel units should be selected with a high alkaline number (TBN). This will increase the resource of the power plant and the frequency of replacement of the lubricating fluid. Good luck on the roads!

Rules for the replacement of motor oils for the Ford Focus of the second generation, as a rule, are reviewed towards reducing the mileage. Consequently, the optimal period between shifts of lubrication in the motor will be 7-8 thousand km. Which oil is better to pour into the Ford focus engine and how much does it make sense to look for official Ford oil, let's figure it right now.

What oil is flooded in Ford Focus 2 at the factory

Mileage is more than 150,000 km. Oil consumption is practically no, within the normal range.

Leone Castrol.

All Ford Focus cars after 2009 are released from a semi-synthetic conveyor, which is called FORD Formula F 5W-30 in the engine. This oil corresponds to the tolerances of FöRD WSS-M2C913-A and FORD WSS-M2C913-B.

Conveyor oil produces French ELF corporation, while the manufacturer does not recommend changing the lubricant in the engine to the first planned maintenance. This is explained by the special characteristics of the semi-synthetic oil, contributing to the high-quality engine running.

Fake FORD Formula F 5W-30

The fake is distinguished by non-clear text and dimensional structure of the capacitance.

D0 2009.

For motors collected until 2009, when replacing the old lubricant on the Förd Formula F 5W-30, there is no need to use any special flushing and other liquids, the replacement technology also does not change and for topping in old engine with Ford Formula E 5W-30 You can use new oil formula F.

In fact, it is not necessary to use the Ford Formula F 5W-30 specifically. It is enough that the selected oil responds to Ford Ford Ford WSS-M2C913-A and WSS-M2C913-B, especially since for obvious reasons the Ford does not produce any oils and uses third-party products.

Which oil is better to pour in the Ford Focus Engine 2

If there is no desire to experiment with the semi-synthetic, recommended by Ford, you can safely try to pour the oil of the American manufacturer MotoRCraft Full Synthetic 5W-30 S ARI SN.

This is a high-quality synthetic product that has Ford tolerances. At the same time, the price of this oil is one and a half times lower than the promoted European brands.

And how much to pour?

Filling oils oil.

For a two-liter engine, the Ford Focus will need at least 4.5 liters.

From European brands often use Castrol Edge 5W-40 Fully Synthetic, Castrol Magnatec 5W-30, but they are more expensive. There are more budget series - Motul 5W-30 913C. 2.5 thousand for 5 liters are asked for him.

Specifications

Following the specification, you can maximize the engine life.

In short, the main indicators of the use of motor oils for the Ford Focu of the second generation remains:

  • factory specification Ford WSS-M2C913-A and Ford WSS-M2C913-B, which must be designated on the sticker, or simply the recommendation of Ford;
  • depending on climatic conditions, it is possible to use oils with viscosity characteristics according to SAE 5W-30 and 5W-40.

Oil filter

Bosch oil filter 0 986 452 044 in context. Made qualitatively.

When replacing the lubricant, an oil filter will be replaced.

For motors of 1.4 and 1.6 liters, the Ford filter will have a catalog number 1714387-1883037, but besides it, you can use analogs from Suzuki with a number in the catalog 16510-61ar0, Bosch filters 0 986 452 019, Bosch 0 986 452 044, FRAM PH3614, and good reputation enjoy German filters MANN W 610/1.

Therefore, for any Ford Focus engines, we use the oil of any manufacturer's manufacturer with Ford tolerances and the above-mentioned viscous characteristics on SAE.

Successful to all choices and a large motor resource!

Watch an interesting video on this topic.

© 2021 Bugulma-lada.Ru - Portal for car owners