What to do if the secret key is lost, or how to remove the secret without a key? How to remove a lock from a wheel without a key: basic methods Step-by-step installation instructions

Car enthusiasts, as a rule, begin to use sekretki in two cases: first, they have tasted the problem of stealing wheels, license plates or hacking car alarms, car theft, and are eager to prevent relapses in the future. The second, notified of the horrors of such unfortunate events, are trying with all their might to secure their car in advance, so as not to spend doubly later. The theft process usually takes place at night. In addition, it is elementarily simple and quick: often representatives of law enforcement agencies simply do not have time to prevent the atrocity, and therefore, waiting for help and retribution, unfortunately, does not make sense. In case of such incidents, such an interesting mechanism as a secret was invented. We will try to answer you the question what are the best secrets for a car against theft and theft of disks, license plates.

What is it

A secret is a special device, a button, which sets the key in a hidden place and which blocks the start of the car's engine or gearshift, which saves the car from being stolen. During the start of the engine, the driver presses a button, applies a magnetic key, presses a secret combination of buttons, or simply turns an additional hidden key and the car starts in normal mode. It would seem how such a simple device as a secret can protect your car from theft, but suppose ... If an intruder tries to steal a car, turn off the car alarm and even get into the car, it will take him considerable time to find this hidden protection and even more so. take off. In such cases, the hijacker usually tries to start the engine several times without success, after which he leaves his potential prey. As a result, your car is saved from theft.

Hidden protection does not always represent some kind of buttons or devices that block the start of the engine or gearbox. Often the locks are special bolts, nuts - which are installed on wheels or license plates. In this case, the intruder will not be able to unscrew the wheels or license plates and your car will remain protected and untouched.

Types and varieties

Currently, the main types of locks for car protection can be divided into the following groups:

• on car wheels;
• on the hood of the car;

Let's take a closer look at each type and type of car lock.

On the wheels of the car

Conventionally, all the car wheel locks available for sale can be divided into three categories, which are different from each other in terms of profile, namely:

• asymmetric polygon;
• with a figured profile;
• perforated.

The first, made in the form of a polygon, are the simplest. The number of faces varies from eight to forty pieces. Naturally, their number is directly proportional to the degree of reliability. The profile is provided in such bolts as external and internal. Moreover, thirty- and forty-square bolts are made only with an internal profile. And, of course, it should be borne in mind that the cost of a security product directly depends on its versatility.

The secret, with a curly profile, is more complex and sophisticated in its structure. Its profile is a combination of different curvature of lines. The manufacturing process of such a mechanism is rather complicated, however, the degree of reliability is high: without a special key, it is unrealistic to remove a special bolt.

In the head of a perforated bolt there are several holes, different in depth, diameter and located in a chaotic manner throughout its area.

By the way, there are secrets that are a combination of curly and perforated ones. They have been awarded the status of the best and most reliable of their kind.

On the hood of the car

This device is designed to prevent theft of critical parts of the car under the hood. Its essence is to prevent intruders from opening the hood of the car. For example, to the side of the lock, opposite to the standard cable, you can place another one. At the opposite end of it (say, in the glove compartment), place an additional lock with a key. Thus, when the second lock is closed, it will be impossible to open the hood even using the standard handle.

There are also special electromechanical locks on sale that block the bonnet.

On the engine

Such a secret is a fairly simple electronic device, the purpose of which is to prevent the car engine from starting. Accordingly, its role in the safety of the car is very significant. And its main advantage is secrecy. That is, only the owner of the car can remove the lock.

Any of the standard buttons located in the cabin or just a separately installed toggle switch can act as a hidden protection for the engine. The latter, by the way, can be located almost anywhere in the car: if only the driver could reach it with his hand from his seat.

The essence of the secret is in blocking the starter or breaking the fuel supply circuits, which are restored when the secret code is entered or a special button is pressed. If the code has been entered by mistake several times in a row, the security device switches to enhanced mode.

On license plates

Secrets for car numbers are, in essence and in principle, similar to special bolts for wheels. These are the same special bolts with a special relief pattern applied to the head. To remove it, you also need a special complex key, made, like the bolt itself, in a single copy. By the way, this key cannot be purchased separately. The protective kit includes four bolts, washers, nuts, one adjusting knob and, of course, a special wrench.

With your own hands

Combining the efforts of imagination, intelligence and cunning, you can create such a means of car protection, which even the most skillful professional cannot cope with. However, if your ideas do not come to mind, you can use the ready-made expert advice for making secrets with your own hands, such as:

• installation of toggle switches (one or more) in a secret place in the cabin, connected by wires to the ends of the carburetor or starter wire;
• the exhaust pipe valve is closed remotely, after which the engine stalls a couple of minutes after it was started;
• installation of a magnetic latch that blocks the gearbox or steering wheel;
• installation of an immobilizer on an electrical circuit that is involved in starting and operating the engine;
• hidden attachment of the radio transmitter to the wires leading to the carburetor or starter, when approaching which will close the circuit.

When choosing a reliable secret protection, many nuances should be taken into account. Firstly, it is the convenience of its design. You should not buy a lock for a car with a small diameter hole or a tapered head: a special key comes off them when you try to unscrew it. By the way, the use of various extension cords for the key is fraught with breakage of the protective device.

Also, with regard to the shape of the hole, bolts with stars, polyhedrons and other simple shapes are weakly effective, to which, if desired, you can easily pick up a regular key.

You should not buy a secret for a car within your region, because each area often has its own specific type of hidden protection, which is well known to local intruders.

Thus, the key to the reliability of hidden protection can be called such design features as:

• the secrecy of the installation;
• the difficulty of determining that hidden protection has worked;
• low bolt head;
• the presence of a special protective ring on the bolt;
• the quality of the metal involved in the manufacture.

In addition, you need to know that even the most reliable secret bolts will quickly become unusable if they get clogged with dirt. And removing them in this case will be a big problem even for the car owner.

The secret is well suited for additional protection of the car, and sometimes the main one. The most reliable ones are considered to be the hidden protection that is performed independently and at a high level. In such cases, it will be difficult for an attacker to figure out where and what secret is hidden. In the case of wheel or license plate protection, you should use the above recommendations and your wheels, the license plates will remain safe. The process of choosing the best secret for a car is not such an easy task. Therefore, you need to be responsible, you need to approach not only the choice of this protective agent, but also to ensure its high-quality, secretive and long-term functioning. After all, the main advantage of hidden protection is hidden installation.

Unfortunately, car theft is not uncommon for Russia. However, even the presence of the most modern and reliable anti-theft means is not able to 100% protect the car from burglars. The solution, undoubtedly, is to install a lock, which makes it much more difficult to steal your vehicle. This mechanism and how to install it are described in detail in this article.

Secrets on a car and its types

The lock is an auxiliary mechanism or button. This device is installed in the selected place and blocks, when attempting to steal, the start of the engine units or the gearbox switching. A button or a toggle switch does not always act as a lock, it can be bolts and nuts installed on wheels or numbers. However, this tool is most likely to keep the vehicle intact. The secret can also block the hood lock and the operation of the fuel pump, in order to avoid fuel drain and theft of spare parts. If we compare the alarm and the secret, then the second option is the most profitable, first of all, due to the size and cost.

Modern secret devices are installed in various places, for example, on the hood, engine, wheels, license plates. You can make a secret with your own hands.

On the wheels of the car.

This device on wheels was common in times of scarcity. Prevented from encroaching on vehicles. Divided along the profile - with a figured profile, asymmetric polygon or perforated. A bolt with a non-standard head shape makes it much more difficult to dismantle with improvised means. Made in the form of a polygon, they differ in the number of faces, and the more multifaceted such a lock, the more expensive it is.

If you choose cheap secret mechanisms, then it will not be difficult for experienced intruders to dismantle the wheels from your vehicle. This is because the number of key combinations is very small. At the same time, due to poor-quality material, the splines can be damaged. The wheels, of course, will remain in place, but removing them will now be a problem for the owner himself.

It is necessary to choose a secret of a well-known brand according to several criteria:

1. The quality of the material of manufacture. The metal of the product must be as hard as possible in order to avoid drilling the core with a conventional wrench or other device. You can check the hardness of the metal with an ordinary file.
2. Surface. It is better to choose a product with a galvanized surface to avoid sticking. Chrome-plated locks look better, but they are not immune to it.

The best secret devices for car wheels are made by brands such as McGard and Farad.

On the hood of the car

This type of mechanism is designed to protect the parts of the car under the hood. The main task is to block the penetration of an intruder under the hood of your car. The most common secret installed on this part of the car is the installation of another cable to open it. The cable, which opens the hood from the inside, is equipped with a lock that prevents penetration into the engine compartment. You can also install an electromechanical lock, which will also prevent breaking the hood. The same systems can be installed in the trunk of a car to protect its contents.

On car engine

Significantly complicates car theft, since it will take a long time for the hijacker to remove the protection. By the principle of operation, it resembles an immobilizer, but you do not need any keys and items that you must always have with you, you just need to turn on the toggle switch where you put it.

The principle of operation of the secret is quite simple. An additional circuit is being installed, which interrupts the power supply, for example, with ignition. Without this system, naturally, starting the engine will be impossible. The place where the button or toggle switch is located is individually negotiated with the car owner. Such secrets can be of varying degrees of complexity - from a simple button to an object being moved to the right place. Most models have a "service" mode that allows you not to give out the toggle switch position when performing maintenance. The greatest difficulty in engine locking is for injection-type motors due to the presence of a large number of circuits, when opened, starting is impossible.

The advantages of this type of mechanisms are - relatively low cost (about $ 50), secrecy, the presence of an autonomous mode of operation (when removing the battery), ease of use. The secret will be even more effective if it is professionally installed. The most reliable devices were products from Meguna, Escont, Validator.

On license plates.

For quite a long time, the resale of twisted license plates to the rightful owner has been flourishing. The attacker, as a rule, says that he found them and asks for payment for his services, and the owner simply does not want to bother with obtaining new numbers, wasting nerves, time and money. Therefore, car owners buy their license plates from thieves.

But license plates can be removed with the subsequent theft of the car. How can you save your car from twisting this important part? Paid parking is not available everywhere, so you need a tool that protects in any conditions. License plate secrets can reduce the likelihood by 90%. How do they work?

Special bolts with an unusual head are placed on the numbers, to which it is difficult to find a key. License plate protection also comes in the form of a special stainless steel frame covering the entire number. The plate of the number is screwed to the frame with bolts, from which the cap is cut off. If a thief wants to take this part of the car, it will be very difficult to stop it, but if you put a lock nut and do not tighten it tightly, turning the bolts will cause certain problems for the thieves.

Making a secret with your own hands

If you combine imagination, technical intelligence and various types of car protection, you can make a unique tool that is beyond the power of a hijacker. And you can use the ready-made advice of the masters, in the event that your own method is not invented.

• install toggle switches in various places in the cabin to break the chains that are carried to the ends of the starter or carburetor;
• shutting off the exhaust valve by remote control;
• installation of a magnetic latch to lock the steering wheel and gearbox;
• immobilizer, installed on the electrical circuits leading to the starter;
• attachment of a radio transmitter causing a short circuit to the starter or carburetor.

The simplest options include locking the steering wheel using a special device-poker, which can be locked with a lock, you can do it yourself at home if you have the appropriate skills.

Do-it-yourself lock types are divided into active and passive. For example, for passive devices, it is necessary to apply voltage, only after that the engine starts. In this case, the attacker loses precious time and leaves the car.

You can also build a mechanical means of protection, for example, on wheels using old bolts from the classics, but this will require remarkable skill and dexterity.

However, many owners stop at the mechanical method, citing the fact that the mechanics fail less often than the electrical circuit. When creating such a device, each owner of a car must have a set of tools, knowledge of electrical and mechanics, and the ability to correctly install the device.

There are many nuances when choosing a way to protect your car from theft. There is no need to put a cheap lock on the wheels - this is fraught with breakage or deformation of the bolts and further difficulties in mounting the wheels themselves. It should be remembered that the do-it-yourself installation process without certain knowledge is impossible or fraught with many problems. The secret goes well in interaction with the burglar alarm. Even the usual, screaming "anti-theft" will scare off the thief. An individual alarm system will take a lot of trouble for a burglar. Installation of the lock is quick and easy if done by professionals. A relatively cheap and simple device can reduce the likelihood of theft or damage to a vehicle by 90%. It is also necessary to take into account the risks in the manufacture of homemade electric locks, because an illiterate installation threatens not only your car, but also the property of other people in the event of a short circuit.

It is best to install such protective equipment at specialized stations in order to exclude all possible breakdowns due to improper assembly and installation. But it is worth remembering that some car services may be in cahoots with the hijackers, which allows them to easily bypass all the protection systems of your car. To avoid this, you can consider the option of installing a lock in a neighboring region. It is also necessary to insure your car, because the installation of even the most perfect secret does not guarantee the safety of your car.

Below is a video about installing a secret button on your car

The next step is to unscrew all the bolts except the secret one. Leaving only it tightened, support the wheel with a jack and gently rock it on the hub.

On the video - removing the secret with a broken key:

Finally, tighten the bolts and nuts again as tight as possible. This again takes the load off the lock. Try to screw them symmetrically so that the disc does not skew. Now try unscrewing the lock.

This method is great for those who cannot unscrew the lock due to the fact that it has become attached to the thread.

Method number 2

The second method is suitable for those who have lost the key, but the protective device can be unscrewed normally. Thus, the problem arises here, how to remove the secret without a key. To do this, try to choose a head that is suitable in diameter. It is carefully stuffed with a sledgehammer onto a secret bolt. Then try to rip it off with a knob. Most often, this solves the problem with the protective device.

Instead of working with a sledgehammer, you can choose welding and weld an ordinary bolt onto the lock head. In case, use automatic or semi-automatic welding and protect the disc with asbestos. Welding may not help in only one case, if the lock is made of very high quality metal, which is unlikely today.

There are still various methods, but all of them are quite ineffective relative to those presented above, and some of them are generally exotic.

The video shows the removal of the secret by welding:

If you do not want to waste time and effort on removing the secret without a key, then go to a car service. Here, professionals will do everything very quickly, but you will have to pay for a quality work done.

What is the bottom line? The secret is an excellent means of protecting the car and its wheels from the encroachments of thieves. The more unique the secret, the less likely it will be revealed. You can achieve uniqueness only by making it yourself. This does not require large investments, only imagination and ingenuity.

And finally, you can remove the mechanical lock from the wheel without a special key on your own, only this will require a lot of effort, time, and patience.

Anti-theft locks are electrical, which prevent the engine from starting, and mechanical, which do not allow the wheel to be unscrewed and stolen. An ordinary toggle switch located in some secret place can act as the simplest secret. It can open the fuel pump supply circuit, ignition relay circuit or starter circuit. Custom wheel nuts or bolts - simple. But it is a very reliable protection against theft.

The unique electronic secret is the most effective protective means against car theft. Even if some thief pulls out your keys with a key fob, he will not start the car, since he will not know in what secret place the button that blocks the start of the engine is located. It is important to make sure that the car alarm uses other blocking methods.

Secret, as an addition to the alarm

The secret is an important and necessary addition to any alarm system. Today you can easily buy scanners that disable up to 95% of existing alarm systems. For this reason, things have become more often stolen from cars, because thieves can now easily turn off the alarm. For this reason, no valuables should be left in the car, as sometimes robbers use simple bricks instead of a scanner. The theft is done in a matter of seconds, and you are unlikely to be able to catch up with the thief.

Types of electronic locks

Nowadays, there are secrets that work according to different control algorithms or have different security and service functions:

• consecutive pressing of the button;
• locks with hood lock control;
• secrets with a limited time for entering the code;
• sequential input of a certain code using standard or additional buttons;
• secrets with motion sensors;
• secret with siren connection.

Benefits and additional features

Important benefits of using anti-theft systems include the following:

1. Electronic secrets cannot be read using software devices that hijackers have long begun to use.
2. By installing a secret under the hood and providing the car with mechanical protection, you will not allow an intruder to disable the device or detect it.
3. No one can steal a deactivator from a motorist, like a key fob from an alarm.

Additional functions

Modern models of electronic locks have a number of possible additional functions:

1. Motion Sensor. This function allows you to start the car, but you will not be able to move on it. The option is great for use in winter when warming up a car.
2. The Anti-Hi-Jack function is a modern addition to the anti-theft system. It works by automatically blocking the operation of the motor in the event that the owner opened the door without performing any special actions that only he knows about.

You can break the starter or carburetor chain by connecting a toggle switch installed in some secret place to the negative wire. Route the wires leading to the usual buttons in the passenger compartment (headlight range control, heater activation). Thus, by connecting several similar toggle switches, you can buy a little time.

Another option for homemade locking is to overlap the exhaust pipe valve, which is controlled remotely. When the engine is started, it will stall after a while. The exhaust gases will not be able to go anywhere, so the car will give the car the impression that it is defective, so the attacker will try to leave the crime scene as soon as possible.

Try installing an additional lock to block the transmission or steering wheel. Special magnetic latches are especially convenient and effective in this case.

In every radio store, you can find a radio transmitter, the principle of which is that the circuit will close when you approach it. It should be connected to the wires leading to the starter or carburetor, and carefully hidden. The main disadvantage of the system is that you will need to carry the transmitter with you.

You can find various immobilizers on sale in the form of factory locks. Recently, there has been a fact that such devices are increasingly being installed on all modern cars. If you do not have anything like this, you can install such a device yourself by connecting it to one of the electrical circuits of the machine, which is responsible for the normal operation of the motor.

If you have experience in installing such devices, try the system that allows the hijacker to extend the unlocking time of the device. To do this, you need to make a system with a complex algorithm for influencing the reed switches and several blocking circuits that activate the relays. If you do not have sufficient experience, entrust the installation of the lock to a professional in the workshop.

Installing or creating a lock for a car with your own hands will allow you to increase the safety of your car for little money.

Installing anti-theft bolts is a fairly effective way to protect the wheels of a car from intruders. To unscrew such a bolt, you need a unique key, which only the owner of the car owns. But if the original tool is lost or forgotten at home, even the owner has a problem, how to remove the lock from the wheel without a key. It is not necessary to contact a car service to resolve this issue, where you will have to pay a pretty decent amount for the service. There are several ways to unscrew the secret bolts yourself.

What is a secret, and why is it installed on wheels

Stealing car wheels is a real business, thriving in modern conditions. Car owners have to confront these "merchants". That is why the so-called "secrets" appeared on the market of auto accessories.

Without a special key, an attacker will not be able to remove the wheel

This is a set of nuts or bolts that can only be twisted from the wheel with the special wrench included in the kit. An unusual head bolt is installed on the wheel instead of one or more standard bolts. After installing it, it is impossible to unscrew the wheel without the original key.

Varieties

The difference between locks and conventional wheel bolts is the non-standard head profile. Depending on its shape, all secrets are divided into four main types:

1. Simple models with an irregular polygon profile with 4 to 40 edges.
2. Models with a figured profile, consisting of applied lines of various shapes.
3. Hole - have several holes of different depths and diameters. This type of lock is considered more reliable compared to previous options in terms of selecting a key for them.
4. Combined models. Bolts with maximum reliability combine perforated and shaped profiles.

General view of the bolt-lock on the Audi car

Removal methods

Unscrewing the locking bolt with a special puller is a matter of minutes: the shape of the profile and the key fit together perfectly. But if the key from the purchased set is lost, the problem with removing the wheels already arises for the car owner.

You can try to pick up a key for bolts purchased from a regular car dealer. Inexpensive Chinese kits have only a few combinations, therefore, after going through several kits, you can find a suitable key to the locks on the wheels. Experts do not recommend using Chinese bolts to protect the wheels, because an attacker can purchase several sets and choose the right wrench.

There are several methods for removing the lock without a key, but most of them lead to breakage of the bolt itself.

With kits purchased in foreign stores, this trick will not work. To remove complex models, use one of the following methods.

Removal by means of a constriction

The essence of the method consists in loosening the lock by tightening and loosening the remaining bolts. Sequencing:

1. Tighten all wheel nuts as tight as possible to relieve stress on the lock.
2. Raise the car with a jack so that the wheel with the lock does not touch the ground.
3. The secret is tapped from all sides to loosen the bolt.
4. The car is lowered so that the wheel is on the ground.
5. Unscrew all the bolts from the wheel so that it is kept only on the lock.
6. Raise the car with a jack again.
7. The wheel is loosened by hand until it begins to oscillate on the hub.
8. Tighten all the bolts to relieve the load on the lock and loosen it even more.
9. The secret after these manipulations is unscrewed by hand. If the bolt has not been unscrewed for a long time, and it "stuck", all the manipulations will have to be repeated.

It is important! Before unscrewing the secret, you need to treat it with penetrating machine oil. The WD-40 liquid, popular among motorists, is not suitable for these purposes. Penetrating oil will corrode the rust holding the bolt, and then it will unscrew without much effort.

With socket head

To remove the bolt using this method, you will need:

• The end head is slightly smaller in diameter than the locking head;
• Torque wrench;
• Hammer;
• Standard bolt;
• Screwdriver.

The sequence of actions is as follows:

• The socket head with a diameter of half a millimeter smaller than the bolt is stuffed onto it with a hammer. This can be done, since the lock is usually made of soft metal. As a result, the soft locking takes the shape of the facets of the end head.
• A lever-knob (torque wrench) is installed on the head and the secret bolt is unscrewed. According to the laws of physics, the lever helps to act on the bolt with more force. Here it is advisable not to overdo it and turn the key slowly with periodic stops. The main task is to move the secret from its place, then it will easily unscrew.
• An ordinary bolt is installed in place of the lock.

The unscrewed lock remains in the socket. They knock it out with a large screwdriver or chisel set in a vice. You can remove the lock by slightly screwing it into place. The degree of tightening should be such that you can then unscrew the bolt by hand. The socket head in this position is loosened and pulled off the lock.

It is important! If the car has expensive alloy wheels with locks installed by manufacturers, you should not try to remove them yourself. It is difficult to remove such a secret, so it is better to contact the service station masters.

Using an internal extractor

Conical Extractor - A tool for removing broken studs and bolts. It can also be used to remove security bolts. The procedure for using this tool is as follows:

• To insert the extractor, a hole of the appropriate shape and size is drilled in the lock.
• An extractor is driven into the hole, and the bolt is unscrewed with it.
• Grasping the extractor with a crank, rotate it clockwise. It is necessary to twist smoothly, without jerking, otherwise the thread will break off, and it will not be possible to remove the wheel without the help of specialists.

To remove a broken pin or bolt, a tool called an extractor is used, which can also help in the event of a lost lock.

The main problem of using this method is the selection of a drill appropriate for the material. If the lock is made of raw metal, a HSS drill will work. For hardened steel, drills with victorious tips are used. To prevent the nib from breaking during drilling, the head of the bolt is generously lubricated.

Making a new key

This method is suitable if you have a highly qualified specialist who can make a key from a mold. The work is quite difficult, but the method will allow you to use the lock in the future, as well as completely eliminate the risk of damage to the disc, tire and wheel hub.

To make a duplicate, a plasticine impression is made from the secretary head. To prevent the plasticine from sticking to the bolt head, it must first be lubricated with machine oil. The resulting cast must be taken to the master, who will make a new key using it.

Exotic methods of extracting secrets

The most unusual option for extracting a bolt is freezing with liquid nitrogen. Exposure to ultra-low temperatures will make the metal brittle, so the bolt is simply smashed with a hammer and removed in parts.

When freezing with nitrogen from a can, you will have to be extremely accurate and get only on the head of the lock. Nitrogen should not be sprayed on other parts and the disc. After the destruction of the head, the threaded part of the bolt is easily unscrewed from the wheel.

How to unscrew the secret in car repair shops

Service station masters use the “old-fashioned” method of welding a bolt or hexagon of a suitable size onto it to dismantle the lock. To preserve the disc, a piece of pipe is often welded from the inside, and a nut, bolt or hexagon to it.

In the service station, the secret is most often removed by welding

When using this method, it is important to choose the right electrode, otherwise the weld will turn out to be brittle during welding and will come off when the bolt is unscrewed. Without experience, it is not recommended to use such a method on your own. The disadvantage of this method is also in the irrecoverable loss of the secret, although if the key is lost, it makes no sense to keep the bolt.

It is important! Sometimes the seals are made of a material to which nothing can be welded.

Video: how to unscrew a secret without a key

Common mistakes of car owners

Using the advice of "craftsmen", some car owners are trying to solve the problem radically. Such methods lead to unpleasant consequences.

• Cut off the bolt with a chisel. The secret will be removed in such a barbaric way, but the wheel rim will be damaged.
• Roll up with a gas wrench. Sometimes this method works on stamped discs. But most lock manufacturers have learned to protect themselves from attempts to unscrew the bolts with a gas wrench. A special rotating ring is installed on the bolt to prevent gripping.

It is important! Inexperienced actions when removing the lock may not solve, but only exacerbate the problem. If the bolt is damaged, but does not give in, do not break it. It is better to immediately contact a specialist in a car service.

It is easier to prevent any problem with the car than to look for ways to solve it later. In order not to have to remove the lock from the wheel without a key, you should come up with a safe place to store it. It is advisable to purchase a special cover that attaches to the wheel wrench. The necessary tool for unscrewing the lock will always be at hand.