Bobket S150 Specifications. Test drive Bobcat S130, S150 and S175 in winter conditions. Last Excavation News Bobcat

ERROR 404
We apologize, but on our site there is no page with the title for which you tried to go! Please use the navigation menu to the left or the main menu in the horizontal red lines.

Bobcat is a multifunctional technique that can use more than 60 types of attachments, which is unsurpassed in the world quality and number of functionality.

The model range of Bobcat products supplied to Russia is divided into four categories:

In 2010, another category was abolished, which was called Articulated Loaders - the category of Al, the supply of which also offered Bobcat dealers in Russia.

Last telescopic news Bobcat:

In the Bobcat telescopic loader line at the end of 2010, serial production of fundamentally new telescopic loaders from the TR-Roto Telescopics Handler series was opened. The Bobcat model range has acquired four such models with a lifting capacity from 3.5 to 5 tons with an arrows lifting height from 16 to 21 meters.
Also, in early 2011, a new model Bobcat TL360 and Bobcat TL470 was obtained in the model range of standard telescopic loaders.

Last Excavation News Bobcat:

In 2011, the Bobcat E26 model is expected in the Bobcat E26 model, which will be released in the category of 3-ton vehicles.

Latest news Bobcat:

BURBERMAL LOADERS, both wheeled and caterpillar, at the end of 2010 and in early 2011 purchased the following models in the model range: Bobcat S630, Bobcat S650, Bobcat S770, Bobcat S850, Bobcat T650, Bobcat T770, Bobcat T870. All new models are available in both standard modifications and in reinforced, that is, with additional hydrolynes. New models have replaced with the production of Bobcat: S250, S300, S330, T250, T300, T320.

Bobcat in stock

Loaders s series, so it is customary to call wheel loaders, SSL categories - Skid Steer Loaders, were first brought to Russia to the Olympics "80", in 1980. Bobcat S series loaders are the most popular and in demand in the market for construction operations. Today, their average implementation per year is approximately 1500 - 2000 units (information is relevant for 2011, reflects the placement statistics on the production of Bobcat dealers in Russia). At the same time, buy today the Loader Bobket is almost impossible from the warehouse. Bobcat, contrary to the expensive value, is a scarce product. Therefore, it is desirable to provide for the need for a car in advance and be prepared for the fact that you most likely put it under the order, that is, with a slight delivery date. This is due to the fact that the production period of some models, as of March 2011, reaches 28 weeks from the date of the placement of the order by the dealer.
The average delivery time of the loader in Russia can be considered the period from 4 to 8 weeks. All that is shipped earlier than this period can be considered a short-term delivery. Everything that comes with a period of more than 8 weeks is considered prolonged delivery and most likely just been placed in production.

What is bobcat in business ...?

The main advantage of Bobcat is its reliability. People's Language: "Bobket is an unbounded car."
We know cases when the Bobket did not go through a complete one for 15 years, but only a partial - replacement of filters, oils and liquids. At the same time, the diagnostics did not record any deviation from the norm on Bobcat. Most machines work without breakdowns of the main components and mechanisms, without overhaul of 10 years. The reliability of the Bobket says and the lack of the sale market for used Bobcat technology. It turns out that selling what is impeccable for years is simply not profitable. Bobcat pays for 300-500% before first repairs.

The car does not break! And what of the arguments of characterizing equipment may be higher?

Many contractors are familiar with the cases of stopping the construction of the facility due to breakdowns of technology. Technique on repair - the object is worth it, and if the deadlines go beyond the permissible, then you have to resort to rental. Rent is most often not planned, respectively, ensured by the resource that the company's profit could become. That is why competent leaders are trying to provide their own enterprises with reliable equipment. That is why there is Bobcat on the market.

Bobcat special equipment: find "your" car ...

Bobcat offers a wide range of specialized attachments, the choice of which is, in our opinion, the first reason for determining the suitable machine. That is, it is your goals and tasks that determine the profiles of the target use of the Bobket in the future, pushing out from which you can make the right choice of the optimal model of the loader.
For example, there is a task: "You need to carry out concrete or cement on the third floor of a construction object." It is impossible to drive a concrete mixer and unload - no entrance, but to "carry buckets" for a long time and inefficient. In this case, when choosing Bobcat, the question can be easily resolved by a concrete pump, which is capable of supplying concrete to a height of up to 30 meters and in a horizontal direction up to 75 meters, feed volume from 15 to 23 m3 / hour. Equipment for solving the problem is defined, now it should be understood which of the cars is most effective in working with concrete pump? Definitely, a machine having an additional High Flow hydraulic line (HF), which is determined by the filing of the volume of the mixture per hour. This means that in this case it is necessary to choose between Bobcat loader models: from S175H to S850H or from T190 to T870. How to choose a loader now, when in the range of choices about 10 ...?
Extremely rare Bobcat performs only one function. The first and most reduced use of Bobcat is to use it in loading and unloading. Therefore, 99% of all the supply of Bobket cars are accompanied by the supply of buckets and pallet forks for them. And then the following criterion for choosing a model loader becomes clear. They are loading capacity.
Approximately such a scheme, our specialists together with clients are suitable for the choice of the loader model: first the target, then the requirements for the load capacity and power of hydraulics.
Choose the desired Bobcat model you can help our section How to choose a loader in which the forms of dividing machines for various design features are described.

Bobcat: Make a versatile car ...

A rich assortment of Bobcat hinged equipment is what it is worth stopping special attention.
The historical role and the goal of creating Bobcat was to mechanize the labor of a person in the agro-industrial complex, namely on poultry and livestock farms. The main function is the loading and unloading operations. Since then, 60 years have passed, and over the years, the Bobket loader has acquired the widest range of functionality in the world thanks to the widest model range of hinged equipment. Now it could be no doubt to call the hydraulic hammer of the Bobket or Bobket, or the milling cutter for the pattern of the Bobket Roads, depending on which the Bobcat loader aggregates.
The most popular hinged equipment Bobcat is former buckets and forks. In our country, new items need time to adapt and obtain the loyalty of consumer views, so the latest developments of Bobcat, which have been safely existing for several years in America and Europe, are only now recognized by Russian specialists. Signs, stackers and seizures of bales and rolls of hay for telescopic loaders, hydraulic hammer, screw boys, stubble brushes, snowmakers, cutters and excavators of various modifications and categories are recognized as high popularity.
Replacing one hitch to another will not require special knowledge or qualifications. The installation operation of attachments, thanks to the Bob-Tach mounting frame, will require only 2-3 minutes even in an inexperienced operator.

Bobcat dealer network (Bobket, Bobket) covers more than 80 countries of the world. The continuous development of the company allows us to offer and guarantee its customers not only the high quality of the products supplied, but also a highly qualified service, which ensures reliability when performing warranty obligations.

Hinged equipment for Bobcat

Many years of experience of the best specialists and modern technical advances have been connected in a new model of a mini-loader from Bobcat - S150. The Bobcat S150 loader has an impressive engine power and wide functionality.

The machine design provides it with high maneuverability due to compact sizes. At the same time, the Bobcat S150 mini loader, unlike other small-sized models, has a greater power and load capacity. This model, which can be confidently attributed to the middle class, guarantees a convenient landing, an improved overview and comfortable operator's work.
The Bobcat S150 mini loader, which came to the change of the popular Bobcat 763 model, was constructed taking into account modern requirements for the special equipment of the middle category. Compared to the machines to the S130 model, the S150 loader has an elongated wheelbase. In accordance with these parameters, the design width is proportionally increased.

Mini loader Bobcat S150 - wide opportunities for middle class
The model optimally combines the comfort and reliability of high-class special equipment with maneuverability. The ability to unfold in place and the small size of the loader make it an indispensable assistant for many areas of activity. The Bobcat S150 mini loader is most effective for earthworks, ideal for use on construction sites.

The multifunctionality of this mini loader is provided by a wide selection of hinged equipment. This allows you to best adapt the loader to any conditions.

A significant increase in the power of lifting and inclined mechanisms due to the special mechanism of lifting with two hydraulic tilt cylinders allows you to work more productively. Thanks to the presence of this system, easily access to the cabin cabin is possible, as well as a good viewing of working attachments.

The Bobcat S150 mini loader has a high performance, is able to lift heavy loads at a considerable height and move at high speed. Good traction provides a powerful diesel engine (its power at the maximum number of revolutions is 46 hp). Effective uninterrupted work of any attached equipment - the merit of a reliable modern hydraulic pump with a capacity of 77 liters per minute.

The Bobcat S150 mini loader is the maximum comfort for the operator.
The model is designed in such a way as to simplify the planting process to the workplace. The spacious operator cabin allows you to feel free. The S150 loader has a good overview not only with the front, but also on the back, as well as from the side. Safety ensures the safety crossing of the seating back.

A wide wheeled base allows you to feel comfortable when moving on any surfaces. This also contributes to the special design of the seating with a suspension, which can be adjusted by several parameters. The machine can be used in the conditions of a harsh climate, as it has a completely closed heated cabin. Modern control and measuring equipment allows you to fully control the situation under any working conditions.

Standard equipment Bobcat S150 mini loader:

• Deluxe cabin (operator cabin)
• Adjustable custodial seat
• Insurers of seating (for all Bobcat loaders)
• Safety belt
• Front and rear headlights
• Front auxiliary hydraulics
• Board boom
• Bob-Tach TM
• Tires 10-16.5 standard Bobcat patency
• Automatic warm candle warm
• Automatic Emergency Disable Engine / Hydraulic System
• Bilateral cooling system
• Automatic Lock System (BICS TM)
• Parking brake
• Measuring, instruments / warn, light indicators
• Sparkovitel

• Multilingual execution
• Indications of all measuring instruments in metric or British units
• Screens of reference information
• Counter Motocamis
• Watch of real-time
• Safety Safety Code
• The ability to diagnose the system
• Blocking functions

Hinged equipment for the Bobcat S150 mini loader:

1. V-shaped snow removal knife
2. Active rake mod.5B
3. Concrete mixer
4. Bulldozer dump
5. Vibration rink
6. Soil equalizer (scheduler)
7. Hydraulic Pellets
8. Hydromaber MOD.NV 880
9. Grader
10. Two-shimmer bucket
11. Turretchik
12. Capture of Pork
14. Wood waste shredder
15. bucket for snow and light bulk materials
16. Building bucket
17. Mower
18. Brush saw mod. RC 60S.
19. Wristband Chain Style
20. Reverse shovel (excavator equipment) mod. R30S.
21. Pallet forks
22. Rotary brush
23. sweeper brush with bunker
24. Soil aerator
25. Industrial Capture
26. Salt and Sand Spreader
27. Rotary cultivator
28. M mod.SB200 Snowpressure
29. Snow removal dump
30. Steel caterpillars
31. Fashion trencher. LT313.
32. Trench seal
33. Tilt Tatch Tilt Tilt Device
34. Scresh drill mod. 15S.
35. Scresh drill mod. 30s
36. Electronics

Additional equipment Bobcat-S150 mini loader:

1. Side windows
2. Cabin's Interior Soundproofing
3. Hydraulic Bucket Positioner
4. Additional hydrolyanium with high performance (only for S160).
5. Rear additional hydrolyanium
6. Cabin closure
7. Instructions for loader operator with onboard turn
8. Instructions for safe operation and maintenance
9. Catalytic cleaner
10. ignition code lock
11. A set of tools for managing hinged equipment
12. Special purpose equipment set
14. Set of signaling devices (reverse signal and beep)
15. Air conditioning (for S160 only)
16. Cabina focus
17. Option "Golden Set"
18. Pneumocoles of supergoing
19. Deluxe dashboard
20. Flashing / stroboscopic rotating beacons
21. FAMILIES
22. RadioComplekt.
23. The smoothness regulator
24. Suspension seat (vinyl or tissue coating)
25. Power Bob-Tach
26. Proactive Regulatory System (ACS)
27. Tires for superheavy operation modes
28. Tires with compensation rims of increased patency bobcat
29. Bobcat polymer filler tires

Specifications / Full Description

Loader performance

Function execution time

Mass characteristics

Engine

Electrical equipment

Hydraulic system

Cylinders of the hydraulic system

Driving system

Drive drive

Filling tanks

Specification of liquids

Controls

Set of devices

The control of the following functions of the loader is carried out by means of measuring instruments and an alarm indicators that are in the field of view of the operator. Warnings about the identified loader faults are fed by sound signals and on the incorporation of alarm indicators.

Standard dashboard

• Measuring instruments
  • Fuel level
• Indicators
  • Bobcat Management Lock System
  • Candles of incandescent
  • Two speeds
• Alarm indicators
  • Engine coolant temperature
  • Fuel level
  • Global warning
  • Safety belt
  • Tension in the on-board network
  • Engine fault
  • Malfunction of the hydraulic system
• On the LCD display when you press the "I" button
  • Motocam counter (Standard)
  • Engine speed frequency
  • Battery voltage
  • Service codes
  • Reminder service

Deluxe dashboard (special order)

The same measuring instruments, alarm indicators, etc., as on a standard dashboard, and add to them:

• Scotch indicators
  • Engine oil pressure
  • Pressure fuel in the hydrostatic system
  • Oil temperature in hydraulic system
• Additional components
  • Push button start, with password protection
  • Digital clock
  • Counter hours counter
  • Information about hinged equipment
  • Digital tachometer
  • Big feed lock
  • Multilingual display
  • Built-in reference screens
  • The possibility of diagnosis
  • Emergency shutdown function / hydraulic system

Performance features

Access through the back door / folding lid and rear cap is carried out to the following items:

• Air purification system
• Generator
• Battery
• Cooling system (Motor oil radiators and hydraulic oil oil, easy to divide, for cleaning)
• Oil and fuel filters
• Mastery and oil dipstick (engine)
• Hole to fill the hydraulic fluid (on the right side of the machine)
• Starter

The hubs of the axes provide protection of axial glands

Bob-Tach ™ hinges have replaceable liners

Convenient access to all arrows lubrication points

The end of the bucket tilt cylinder rod has a shift insert

Castle can be installed on the back cover for protection against hooligan actions

The back cover has a stopper for fixing in the open position when servicing

A folding cabin provides access to individual components of the hydraulic system.

Standard equipment

• Pressing seat with headrest
• Automatic heating of incandescent candles
• Additional Hydraulics: Variable Feed / Maximum Feed
• Bob-Tach ™ Frame
• Bobcat Management Lock System (BICS)
• Operator cabin in the configuration Deluxe *

Includes: inner lining by foam, side, upper and rear windows, wiring harness for auxiliary devices (performed by Deluxe), ceiling lighting and power connector

• Front add. Electric proportional hydraulics
• Emergency Turning Office / Hydraulics
• Hydraulic bucket positioning system (included with switch)

• Set of devices
• Pop the arrows
• Work lights (front and rear)
• Parking brake
• Safety belt
• Frame safety
• Silencer with sparkling
• Tires - 10-16.5 - 10-layer - Bobcat for heavy operating conditions
• CE. Certification
• Warranty: 12 months or 2000 hours

* System of protection in turning (ROPS) - meets the requirements of SAE-J1040 and ISO 3471 standards, and the system of protection against incident items (FOPS) - complies with SAE-J1043 and ISO 3449 standards, level I

Optional equipment

• Additional nodes installed at the factory
  • Deluxe panel
  • Power Bob-Tach ™
  • Heater Cabin
  • Tires for super heavy operating conditions with foaming filler - 10 x 16.5 - 10-layer
  • High passability tires for heavy operating conditions - 31x12-16,5 - 10-layer
  • Tires for superheavy operating conditions - 10x16.5 - 10-layer
  • Tires with replaceable segments - industrial type - 7.50-15
  • Tires with replaceable segments - 10-16.5
  • Advanced Management (ACS)
  • AHC manual control system
  • Joysticks
• Auxiliary devices installed by a dealer
  • Cabin case set
  • Set of special devices
  • Set of opposition
  • Set of opposing front axles
  • Kit for locking the fuel tank cover
  • Deluxe panel
  • Replaceable Bob-Tach ™ System
  • Support air heater kit
  • Front door set
  • Door sensor set
  • Mounting Supply Air Heater
  • Reverse Signal Set
  • FOPS ** system kit
  • Single-point solving kit
  • Replaceable design cabin operator
  • Power Bob-Tach ™ kit
  • Operator Cab Cable Kit (CE)
  • 7-pin hinged equipment control connector
  • Four-point solving kit
  • Set of rear extra. Hydraulics
  • Extra. Auxiliary hydraulics

** System of protection against falling objects (FOPS) - complies with SAE-J1043 and ISO 3449 standards, level II

Hinged equipment

List of attachments for each model, see Bobcat Price List.

• Concrete pump *
• Bulldozer dump
• Bulldozer dump *
• Soil equalizer
• Hydraulic full-turn scissors *
• Hydromaber **
• Rakes for the arrangement of parks and gardens
• Grader*
• Two-lens bucket
• Capture industrial
• Capture agriculture
• Wood waste chopper *
• Hydraulic Bass
• Bucket
• Digger
• Reverse shovel
• Pallet forks - Standard
• Rotary brush * †
• Rotary brushcat rustoresis
• Dumping bunker
• Standard Boxed Earthy Dump
• Screw
• Tilt-Tatch ™
• Vibrating rink
• Steel caterpillars
• Rear hydraulic remote support
• Shredder Stumpy *
• Kirchshchik
• Set of waterproof equipment
• Pallet forks - hydraulic
• Transplant seedlings trees *
• Sweeping brush with bunker
• Soil Aerator *
• Spreader
• Rotary cultivator
• Rotary Snow Practice *
• SUPER SCRAPER scrapper for removing coatings
• Trancherach
• Trench seal
• Tarry Stacker *
• Universal pitchfork
• Digital mounting device
• Cold cutter *
• Circular saw
• Brush with long bristle

* Also needed a set of hinged equipment.

** When working on the loader with this attachment, you must use a set of special devices, which includes the Lexan cabin fencing with the front door (12 mm thick) and upper and rear windows (6 mm thickness).

† Waterfrost equipment (special price).

Environmental impact parameters

Safety

* Level I - protection against incident bricks, small pieces of concrete and tools that are used when repairing highways, with garden-park work and other construction sites.

** Level II - Protection against falling trees and stones when performing work on clearing platforms, demolishing structures or cutting down of the forest.

Information source www.bobcatnetnet-esa.com.

Standard equipment Bobcat S150

1. Bob-Tach ™
2. Automatic warm candles warm.
3. Auto Emergency Engine / Hydraulic Disabling
4. Bilateral cooling system
5. Measure, instruments / warn, light indicators
6. Sparking (3150 only)
7. Deluxe cabin
8. Cabin operator
9. Arrow support
10. Front and rear headlights
11. Front auxiliary hydraulics
12. Adjustable custodial seat
14. Safety belt
15. Automatic Lock System (BICS ™)
16. Parking brake
17. Insurers of seating (for all Bobcat loaders)
18. Turbocompressor (for S160 only) (approved sparking device).
19. Tires 10-16.5 standard Bobcat patency

Powerful. Uninterrupted. Fast

The compact loader has everything you need.

The new Bobcat S150 and S160 models with turbochargeds have a high power, lifting capacity, lifting height and speed of movement. Powerful diesel engines provide excellent traction and detachment effort to carry out earthmock and transportation of large loads. Hydraulic pump with a capacity of 77 liters per minute ensures efficient operation of attachments.

As with any other Bobcat loader, there is a wide range of boobcat quickly installed attachment. The operator can easily replace the bucket on the reverse shovel, pallet forks, a rake, a brush with a bunker, a cultivator, a grab and much more. In addition, everything is provided for everything necessary for the convenience of the operator:

Simple landing and disembarkation
Wide wheelbase for smooth and comfortable movement
Excellent overview with side, front and back sides of the loader
Spacious cabin for operators of any dimensional
Insurers of the seating, leaning back
The most modern control and measuring equipment
Fully closed cabin with heating
Air conditioning system (S160 only)
Fully adjustable suspension seat

Features of the Deluxe dashboard provided for additional order:

Multilingual execution
The ability to diagnose the system
Indications of all measuring devices are given in metric or British units
Blocking functions
Safety Safety Code
Counter Motocamis
Watch of real-time
Screens of reference information

Bobcat Ir.

For almost half a century of the company Bobcat. Find application when conducting a wide range of works: loading and unloading, earthy, earthmoving and planning, sealing, sealing and road surfaces, preparation of concrete mix, destruction of old structures, repair of asphalt concrete coatings, laying various kinds of communications, improvement of territories for development and development and Upon completion of construction, cleaning and maintenance of the territory of construction space, as well as driveways in the summer and winter period.

For the first time the history of creating a multifunctional small-sized machine Bobcat. It was proposed by the American firm Melroe in 1958 for the mechanization of labor-intensive loading and unloading works in farms. Since then, the company has continuously improved the constructive scheme of the basic chassis, expanded the range of interchangeable work equipment, paying special attention to ensuring universality, maneuverability, compactness, reliability, efficiency, ease of management, security and comfort of the operator, to simplify maintenance.

Developed by Melroe Constructive diagram of a universal small-sized loader Bobcat. The onboard turn became classic and was used to organize a number of companies in the USA, Canada, a number of European countries, Japan. However, today firm Bobcat. (Melroe) is an undisputed leader, occupying a leading place in the world in terms of production and marketing such equipment (53% of the world market), offering all six continents the widest range of fifth, sixth and seventh generation machines.

Winter, as always, granted suddenly and became a complete surprise for the hydrometector. According to the first snow, we hurried to find out how representatives of the Feline family are transferred - Bobcat mini-loaders with onboard rotation S130, S150, S175

Three models of American "Rysy" - S150 and S175 - Showed the abilities in the fight against the traditional Russian natural disaster: compactness, maneuverability and amazing ease of control in combination with the flexibility in the use of hinged equipment, which has more than 40 species. The presented models differ in performance, dimensions, mass and design of the working equipment - the boom and the tipping mechanism of the bucket.

The "trot" heart is a transversely located four-cylinder Diesel Kubota with a volume of 2.2 liters through a clinorem transmission leads a common hydraulic pump. Thanks to this, designers were able to reduce engine operating turnover, the car began to work quieter and more economical. When servicing, the belt tension is checked, if necessary, they are manually tightened. Two separately managed stroke hydromotors lead to the movement of the wheels through massive, loaded chain transmission (one on each wheel), which provide smooth and quiet operation of the transmission. Opening the rear door and removing the radiator grille, the operator gets access to daily maintenance points. For more detailed access to the hydraulic system and transmission units, the cabin rises and leans back, on the engine compartment.

The easiest and most compact model -S130 is distinguished by a simple, "thin" arrow design; The bucket overturns by one hydraulic cylinder. S150 is already thorough. This is a basic machine, more in size and mass; The arrow of the same design as in S130, but two hydraulic cylinder are involved in the tipping mechanism of the bucket. The base machine S175 is the same in size as S150, but an increase in its carrying capacity is achieved not only by increasing the mass of the base machine and the power of the hydraulic system, but also due to the complex kinematics of the movement of the boom with the trapezoidal lifting mechanism. Thanks to this system, the rotation radius is reduced compared to S150. As with any machine, the loader's finger junctions need periodic lubricant. As already mentioned, currently the gamma of hinged equipment has more than 40 items and is constantly expanding. There is a specialized tool for snow harvesting: brushes and rotary snowpots that Bobcat company very accurately calls "snowmers." The swivel snail "The Snowman" allows you to change the direction and the cast angle of snow, as well as ship it directly into the dump truck. We also assessed the effectiveness of cleaning with a brush and even able to compare results with the work of the belt equipped with a brush "Belarus". Bobcat cleared the road almost to the asphalt, while "Belarus", the estimated snow, the estimated snow "polished" the layer approached asphalt, and partly such a result can be attributed to the "freshness" and the quality of the brush.

The road is remarkably inspected by the full-time bucket, and in the cramped conditions of the yard or construction site of the best car for cleaning snow, perhaps not to find. Changing attachments are carried out by the quick forces of one operator thanks to the Bob-Tach mechanism. In the basic configuration, the locks are opened and closed manually, and the hydraulic Bob-Tach mechanism is set as additional equipment, but in this case, leave the cabin only to connect the hydraulic attachment.

The entrance to the cockpit through the front door demanded special caution. An intermediate step when lifting the cabin is the hinged equipment, and if it is iced, you can slip. Closed glazed Rops-Fops Cabin unexpectedly turned out to be very spacious. The position of the back and seat cushion is adjustable - you can get comfortable. The "senior" models S175 and S150 were equipped with standard controls: two levers change the direction and speed, the left pedal controls the arrow, the right - the bucket.

Under the ceiling - control panels. Ignition lock and indicators are displayed on the right panel, the control buttons of the hydraulic system are on the left. When the ignition is turned on, the electronics tests the machine system, and all four "eyes" should be lit under the inscription "Bobcat Interlock Control System" on the left panel. When starting in a cold time, you need to give the machine the ability to gradually heat the hydraulic fluid, switched to this pump to the MAXIMUM OIL FLOW / VARIABLE FLOW mode, and then return to the maximum. Run the engine, and it becomes quite noisy - the proximity of the engine compartment affects. To start moving, you need to perform a number of mandatory operations: close the door, omit the safety arc, to play from the parking brake and press the green button "Press to Operate Loader" on the left remote control. The lever on the right of the seat is exhibiting the engine speed somewhere on a 2/3 of the crossing of the lever and go.

Work is mastered in the literal sense instantly - no complex movements and debugged controls. For a novice operator, the "Atcket Positioning" button can be useful by clicking on which it transmits the machine control over the bucket position when lifting the arrows. The car reacts to the commands smoothly, without noise and vibrations. Make in the snow turn in place - simpler simple. When driving, we are infant with the opposite of the levers that are deliberately tight. When moving in a straight line, one lever can be released if you need to switch something, such as the heater selector at the top on the left side. In the basic configuration, the cab is not insulated from the bottom. Moreover, the ventilation holes are open at the bottom, so the feet of Merzley, although the heater tried from all his might, nervous heat through four deflectors at the seat level. For Russia, this option is vital. At the end of the work, I lower the ladle on the ground, otherwise the door will not open, but if you forgot about the bucket, it is not necessary to start the engine again: to the right of the seat there is a red square button that you need to turn and raise, then the bucket will fall under your own weight.

The "younger" model S130 is equipped with multifunctional joysticks, which causes control and working bodies. On joysticks - a variety of switches controlling complex hydraulic equipment for which the installation of additional hydraulic pump may be required. Since each joystick is derived from two main movements, their development took a few more time. But the legs are not involved - you can sit in boots.

Only working on the "lynx", you can estimate all the simplicity and ease of control, and then the reasons for the popularity of Bobcat become understandable - after all, the trading mark itself became the people with the name of the nominative, denoting the loaders with a side turn.

Specifications of models S130, S150 and S175