Where is kia sorento harvested? Where is the Kia stinger assembled Where is the Kia Sorento assembled for Russia and other countries

When buying a car, one of the key criteria is where it is assembled. Many parameters depend on this - the level of adaptation to local roads, the quality and even the technical characteristics of the vehicle.

As demand rises, major manufacturers open factories in many countries around the world.

The South Korean company KIA, which has a wide geography of factories, is no exception.

Where are cars of this brand produced? Where do the cars come from to the Russian market?

General information about KIA

Concern Kia Motors Corporation is a South Korean brand, which ranks second in size in South Korea and is one of the ten largest companies in the world.

The year of foundation is considered to be 1944, when the new enterprise became part of the Kia Group. Full allocation to an individual unit took place in 2003.

At first, the company was named KyungSung Precision Industry, and only since 1951 it was renamed KIA Industries.

The initial direction of work of the newly created structure is the manufacture of two-wheeled vehicles (motorcycles and bicycles).

Only in the 70s of the last century the production of cars and trucks started. In less than 20 years of activity, the millionth car rolled off the assembly line.

In 1998, the company was hit by the financial crisis associated with a decline in consumer capacity and a drop in sales.

In the same period, the Kia company lost its independence, and was acquired by another Hyundai manufacturer. A year after the merger, the Hyundai Kia Automotive Group was formed.

The turning point was 2006, when Peter Schreyer, a German designer who was involved in the development of many models of such manufacturers as Volkswagen and Audi, got a job at Kia Motors.

In just four years (from 2008 to 2011), sales of Kia vehicles jumped 81 percent, and total sales amounted to 2.5 million vehicles per year.

Today the KIA company continues to gain momentum, offering more and more new models to the world.

With the growing popularity of KIA machines, company representatives were forced to expand production. So, since 2005 in Russia at the IzhAvto plant, Spectra models have been produced, since 2006 - Rio, and after a while - Sorento.

By 2010, the production process of cars at this plant was discontinued, but a few months later the plant resumed work for a couple of months to produce a small batch of Sorento and Spectra in order to cover the current obligations of IzhAuto to the South Korean brand.

Another assembly site is Avtotor (Kaliningrad), where the following KIA models are admitted - Sid, Sportage, Soul, Sorento, Cerato, Wenga and others.

Avtotor plant in Kaliningrad.

The mentioned companies were engaged only in production, and the distribution tasks were performed by KIA Motors.

Thanks to the well-established production, for several years, starting from 2010, the KIA brand is the leader in sales in the Russian Federation among foreign cars.

Since 2011, the production of Kia Rio cars, optimized for local operating conditions, has started in St. Petersburg.

The car is based on the platforms of two famous cars from the Hyundai company (i20 and Solaris).

Already the first years have shown the success of KIA Rio in the Russian market. In 2014, sales of this model exceeded 10 thousand units every year.

In which countries and where is Kia Sportage 2016 assembled, factories in Russia

In which countries and where is Optima assembled, factories in Russia

Another noteworthy model is the KIA Magentis, known in Russia as the Optima.

The production of this KIA model started in 2000. The first generation cars were sold under the name Optima, but in 2002 the Canadian and European market received a car with a new name - KIA Magentis.

On the South Korean market, the second generation cars had other "names" - K5 and Lotze.

The third generation of cars has been produced since 2010, and it was from this period that KIA Optima received worldwide recognition.

Since 2010, Kia Spectra has been assembled in Izhevsk, the quality of which was very decent. So, after a while, the release of another model was launched -.

There is an opinion that these machines are produced only in South Korea. But this is a misconception. This state of affairs took place until 2014. Now the car is assembled not only in the Russian Federation, but also in the USA.

There are no European factories that would produce KIA Optima, because South Korean capacities are quite enough to cover current demands.

In Russia, KIA Optima is produced at Avtotor (Kaliningrad). The plant has a well-established production and a wide staff of experienced employees.

As with other models, the emphasis is on SKD. At the same time, complete units come from the territory of South Korea.

Build quality is key for many car owners. The following points should be highlighted here:

• In Russia, the car is assembled from large units that are debugged and tested;
• The quality of the finished transport is closely monitored, which negates the appearance of defects on the market;
• In the USA (Georgia) KIA Optima is produced for domestic consumption. In this case, the assembly scheme is the same as in the Russian Federation. If we compare the final result, there is almost no difference. The only thing that is different is the package bundle.

In which countries and where is Cerato collected, factories in Russia

The KIA Cerato model is a worthy representative of the South Korean brand. The car belongs to the category of the middle class, was first presented in 2004.

Cerate of the 2nd generation appeared four years later, in 2008. The third generation is in 2009. Since the appearance of the new model, the geography of production has gradually expanded.

The car was produced in India, Iran, Ecuador, USA, Russia, Ukraine and several other countries.

As for the KIA Cerato, the first and second generation of cars were produced in South Korea, and since 2006 in the United States. Since 2009, when the 3rd generation Cerate appeared.

At the same time, the manufacture was entrusted to a number of other countries (including Russia).

The "Asia Auto" plant in Ust-Kamenogorsk (Kazakhstan), where SCD-assembly was carried out, joined the work.

The bottom line was that the plant received ready-made components, which were assembled within a few hours by the workers of the plant.

In Russia, the production of KIA Cerato is carried out by the Avtotor plant located in Kaliningrad. Previously, only large-scale assembly took place, but since 2014 a full cycle has been established.

In which countries and where is Soul collected, factories in Russia

The KIA Soul is a compact mini SUV, the first sales of which on the South Korean market began in 2008. It was then that the car was presented at the Paris Motor Show.

Interestingly, the car does not fit a particular class, but most often Soul refers specifically to a mini-SUV.

The main feature of the model is a high level of comfort for passengers and a huge trunk, which becomes even larger when the seats are folded.

In Europe, KIA Suoul appeared only in February 2009, and in the USA - in April.

For the Russian consumer, KIA Soul is assembled at three factories:

• In Kaliningrad - Avtotor;
• In Kazakhstan - "Asia Auto";
• In South Korea.

There is information that the KIA Soul is being assembled in China, with which a close partnership has long been established in Russia. Cars from the Middle Kingdom are exported to many parts of the world, including Russia.

Are there any differences in assemblies? In Kaliningrad, there is a "screwdriver" production, when the workers of the plant assemble ready-made assemblies. Consequently, the quality of finished machines does not greatly depend on the place of production.

In addition, ready-made assemblies also come to China and Kazakhstan, so finding differences in assembly is a difficult task. All that may differ is the package bundle.

Outcomes

As you can see from the article, KIA cars have a very wide geography of production.

On the Russian market, cars mainly come from St. Petersburg, Kaliningrad, Kazakhstan, South Korea and China. Much depends on the model and current demand.

KIA Sportage, Optima 2016: assembly jambs, crooked assemblers.

/ div>

One of the most popular at present car "Kia" (country of origin - Korea) has been pleasing motorists for 13 years. The Sorento model debuted in America in 2002. After the presentation at the Chicago auto dealerships, the car quickly began to gain popularity. In total, three generations of the Kia Sorento were released.

1st generation

The story, as mentioned above, began in 2002. It was then that everyone saw the first Kia-Sorento SUV. The country of origin is South Korea, but the assembly was carried out at several Kia Motors factories. The first was in the homeland of the car, the second in Russia, the third in the Philippines, and a little later, due to the increased demand from American buyers, it was decided to assemble in the United States.

As for the Russian plant, which was located in Izhevsk, at that time only screwdriver assembly was carried out there. If we call this process in simple words, then the finished elements came to the workshops, where it was necessary to put them together.

After 4 years, it was decided to upgrade the model. During the restyling, the design of the car was changed and new, more powerful power units were installed.

2nd generation

The first generation was produced for 7 years, but in 2009 a new version of "Kia" was presented in the capital. The country of origin of the Sorento car could change, because the assembly was carried out in different places. As a rule, they are guided in this issue.For example, in Russia it was decided to abandon Izhevsk, and production was moved to Kazakhstan. It was in Ust-Kamenogorsk that a plant was specially built, which was named "Asia Auto". Concern "Kia Motors" has installed the most modern equipment there, so you don't have to worry about the quality of assembly, reliable cars are supplied to the Russian market. By the way, it should be noted that Korean specialists are closely watching the products that come off the assembly line.

III generation

In 2014, the Koreans presented a completely updated Kia car. The country of origin arranged a "bride" in Paris. A year later, it became possible to purchase a model on the Russian market. However, with one condition - the assembly was carried out on "Avtotor". Back in 2013, the conveyor was transported to Kaliningrad. Those who want an American or Korean assembly will have to pay a considerable sum, since it is not officially sold on the territory of the Russian Federation.

Description Kia Sorento 2015

In Russia, it is a fairly popular car. And we can say with complete confidence that right from the first day of sales, the car took a leading position in the segment. At the same time, it is worthwhile to dwell more specifically on how this was done. With any restyling of the car, the appearance changes one way or another, the same applies to the Kia model range. The country of origin tried to put maximum effort into it. At the front, the Sorento received a new grille, as well as a bumper with new optics. The headlights have acquired LEDs in the front, and LEDs have appeared in the back.

Kia car innovations

What is fundamentally new in their car that the Koreans have proposed? Naturally, bold decisions in appearance and interior decoration, a more economical diesel engine with a turbine, the suspension became stiffer, and the ground clearance decreased by 1 cm, while from the point of view of safety, the rigidity of the body was much increased - by about 18%.

As for convenience, "Kia" (the country of origin - South Korea) is the leader in this category, in the top version the car is impressive. When you first approach the car, the backlight of the grips immediately turns on, and when you start the engine directly, the position of the front wheels is visible on the screen. For the cold season, the car has nice little things like heated steering wheel and seats on three levels. The most important thing is that all these functions are already in the basic version. The dashboard in the car is completely new, the plastic has changed, it has become matte and more comfortable. The steering wheel is not particularly informative, even if there is an amplifier adjustment button directly on it.

From the rear, visibility is small but clear. On the go, even in economy mode, the engine reserve lasts for a long time, since under the hood is a turbocharged diesel engine. In order to get into the car, people with a height below average will have to try, there is a very high seating position, and the lower part of the body itself - you feel in this crossover, like in an SUV. The brake pedal was not particularly conveniently located - next to the resting place. This is too low, there is a chance of catching it accidentally. In general, the car has become much better.

2015 Kia Sorento competitors

Who can become a real competitor or is it already for the Korean Kia crossover? Which country is the manufacturer of cars of the same class? South Korea, of course. But one can also mention Japan, the United States, and a number of others. Of the models, it is worth remembering the Chevrolet Captiva with a 2.2-liter engine and a capacity of 184 hp. with. The car is produced by the Bupyeong car company. There is also a Hyundai Santa Fe with the same engine, but with 13 hp. with. stronger, the Opel Antara with similar characteristics to the Captiva. Well, and Toyota RAV4 - all with the same engine displacement, but much less powerful, only 150 horses. The model is assembled in Japan and other countries, because the Toyota concern has 52 factories.

The Avtotor plant in Kaliningrad has been assembling KIA cars for over 20 years. The first KIA model rolled off the Kaliningrad assembly line back in 1997. This model was the KIA Clarus:

To date, the Kaliningrad plant produces 11 KIA models:

• Kia sorento
• Kia sorento prime
• KIA Soul
• Kia picanto
• KIA Optima
• Kia sportage
• KIA Cee'd
• Kia cerato
• Kia mohave
• KIA Quoris
• Kia stinger

The Avtotor plant started production of the KIA Stinger in January 2018. The Kia Stinger is assembled using the SKD method (large-scale assembly from car kits), which are supplied by Kia Motors factories in Slovakia and South Korea:

The Avtotor plant in Kaliningrad is one of the largest and most ambitious enterprises in the Russian Federation, which specializes in the automotive industry. Every ninth car in the state leaves the assembly line of the company. The assembly and release of Kia brand cars have been produced since 1996, it was then that a contract was signed with the KIA Group.

The plant first receives molding metal sheets, from which individual parts of future machines are welded. During the assembly process, more than 3000 weld points need to be connected. Then the product is sent to the welding jig, where the bodies are formed. After that, additional points are combined in the body finishing section. Then the geometric parameters of the body are measured using special equipment. For this, a random car is taken and tested at 300 points along the x, y, z coordinates. After that, the machine is painted, a sealant is applied, polishing is carried out, and then control testing.

In Russia, the acceptance of applications for the purchase of Kia Stinger was held back in December 2017, and they began to supply products to customers in March 2018. Stinger is the first Gran Turismo fastback in the history of a Korean manufacturer. The car was created at the Kia Design Center in Europe based on the GT-concept. According to the control of public relations and the media "Avtotor", the car is sold in the Russian Federation in 3 variations with 2 types of motor: 2.0 T-GDI and 3.3 T-GDI.

The updated version is sold at a price of 1 million 999 thousand 900 rubles. For this amount, a standard modification is realized with a rear-wheel drive Stinger 2.0 T-GDI and a limited-slip differential.

Kaliningrad specialists adjust the engine power to the specifics of the state taxation system, which is equal to 248 horsepower, and the maximum torque is 353 Nm. These characteristics guarantee the fastback 5-door design to accelerate to 100 kilometers per hour in just 6 seconds. There is also an all-wheel drive vehicle modification for the 2.0 T-GDI on sale.

The Kaliningrad enterprise also produces the most powerful version of the Stinger GT 4WD machine for sale in the Russian Federation. It is equipped with a 3.3-liter V6 Lambda engine with fuel injection and twin-tube supercharging. The power of the car is 370 horsepower, and the highest torque is 510 Nm. At the same time, the acceleration to one hundred kilometers per hour is the fastest of all existing brands of Korean-made cars - 4.9 seconds.

It should be noted that all modifications of the Kia Stinger are equipped with an automatic transmission of personal design in 8 steps.

The car kit consists of the main components of the car: body, engine, transmission. All delivered car sets pass the incoming control. The parts are then unpacked and stacked on trolleys in accordance with the assembly order.

After passing the entrance control, the bodies go to the internal logistics area, where they are thoroughly washed. After that, they are put on protective covers so as not to damage the rest of the equipment during installation. In this form, the body enters the conveyor, at each section of which new parts are mounted on it. At a certain stage, the body is already waiting for the previously assembled chassis with the engine and transmission. Then wheels are installed on an almost assembled car, it is filled with fuel and other liquids, after which it moves on its own towards the first sea trials.

Russian dealers of KIA have already started accepting applications for the KIA Stinger. starts from 1,899,900 rubles.

At the moment, the Kia company produces some of the highest quality and most popular cars. A real breakthrough in the automotive industry was the debut of the Kia Sid model, which became a real "bestseller" in the European and, in particular, Russian markets. Photo: Kia Sid 2017

Since the start of car production, several restyling has passed, which, no doubt, only positively affects the level of popularity of the model.

According to experts, Sid is the most prominent representative of the European class "C". In today's article we will talk about where the Kia Sid is made, and which car is better.

It is worth noting that the Sid model has become the most ambitious and large-scale project of South Korean automakers. Slovakia became the first place to assemble the car. By the way, the most powerful plant is located here. For Russia, the car has been made since 2007 at the Avtotor Kaliningrad plant.

Russian designers assemble cars using the same technology as their Slovak colleagues. It is worth noting that the domestically assembled Kia Sid is also equipped with two gasoline units with a volume of 1.4 and 1.6 liters. They are paired with one of the transmission options: a six-speed manual transmission or a six-speed automatic transmission.

For all the years of production, domestic motorists managed to fall in love with the compact "Korean", so the level of sales to this day is quite high.

Kia Sid production for Europe

Photo: millionth Kia Sid As mentioned above, the most powerful plant that Sid produces is located in the Slovak city of Zilina. It is here that models are assembled for implementation in Europe. Slovak cars are considered reliable and high-quality vehicles that comply with all European environmental standards.

It should be noted that the build quality is controlled by the best specialists, and with the slightest flaws, the products are immediately sent for revision.

It is interesting that the Zhilinsky enterprise, in contrast to the Kaliningrad one, uses a full assembly cycle. All the main processes take place here: painting, stamping, final assembly. There is also a separate workshop, whose workers make power units and transmissions.

At the Slovak factory, almost the entire assembly process is automated. Employees only operate robotic equipment. All this is controlled by advanced Korean specialists.

Every fifth car assembled in Slovakia is exported to the Russian market.

Russian assembly Kia Sid

Photo: assembly of Kia Sid in Russia The enterprise in Kaliningrad is rightfully considered the largest and most productive in Russia. In addition to Sid, the latest BMW and Hummer models are also assembled here.

Avtotor is equipped with all the latest technologies. Before the start of the production of Kia Sid, Korean investors made several serious financial investments into the enterprise, so we can safely say that this is an advanced plant in Russia.

It is worth noting that each Avtotor worker who is involved in the assembly of the Sid underwent a special training course.

The first batch of cars, despite the pessimistic forecasts of foreign experts, has successfully passed all the tests and was rated "Excellent".

The Kaliningrad plant uses the SKD assembly method, so it is not surprising that Slovaks supply here:

• body panels;
• gear boxes;
• engines.

At the plant in Kaliningrad, the final stage of assembly is underway: workers are installing power units and assembling the salon.

Since 2010, after another restyling, the FL marking has been added to the Russian assembly LEDs. The changes mainly affected the trim levels.

The qualities of Russian Kia Sid

The Russian enterprise is constantly attended by independent specialists who monitor the assembly process. But, recently, more and more often you can hear negative reviews about the domestic Kia Sid. Car enthusiasts are not satisfied with the rigid suspension and unstable ground clearance. Considering the Russian road conditions, these malfunctions are very significant.

While driving on the domestic Kia Sid, every hole is felt, in addition, many note poor sound insulation.

The body, which, by the way, is supplied from Slovakia, is very unstable to corrosion, and the main reason lies in the fact that the developers used cheap metal. Also, the paintwork is not of the best quality.

Of course, these shortcomings negatively affect the reputation of the Russian Kia Sid, but this does not prevent him from remaining in the top three of the best-selling rating.

kiaportal.ru

Where is Kia Sportage collected for Russia and other countries

The popular crossover Kia Sportage is one of the best-selling cars in Europe and the CIS countries. This is not at all surprising, because the model has been on the market for a long time and has established itself as very high quality and comfortable.
Photo: Kia Sportage 2017

A big plus can be called the fact that the cost of the car is relatively low, even for the option with the maximum configuration.

However, for most buyers, these indicators are only secondary, and they consider the place of assembly of the car to be the most important point, because in spite of the general concept of production, cars produced by different factories differ markedly.

In today's article we will try to find out where the Kia Sportage is assembled for Russia and consider the most powerful factories of the South Korean giant.

The main factories that produce the Kia Sportage are facilities in Slovakia and Russia. A logical question may arise here: "Isn't Sportage released in Korea?" The answer, of course, will be positive, but since cars that are made in Korea do not enter the domestic market, we do not consider this plant.

Factory in Slovakia

Photo: Kia Motors plant in Slovakia One of the most powerful is the Kia plant in Slovakia. It is worth noting that it was the cars of the local production that flooded the Russian market in 2014.

It is equipped with the latest conveyors and equipment, and its total area is as much as 223 hectares.

Located in the city of ilina, which is the second most populous city in Slovakia.

The Korean concern announced a tender for the construction at the beginning of 2000, and it was the Slovak designers who were lucky enough to get it. Investors have poured $ 1 billion into the building to make it a worthy competitor to other European giants.

The Slovak government fully supported the idea of ​​construction, and it was thanks to this that it was possible to build the plant in a relatively short time.

Annually, about 300,000 units of cars come off the assembly line of the Zhilinsky plant Kia, which can be called quite a good result, given that the number of employees is 3,000 people.

It is worth noting that the plant in Slovakia also produces cars of the BMW and General Motors concern.

Kia Sportage plant in Russia

Photo: assembly in Russia Many motorists know that in Russia, namely in the city of Kaliningrad, there is also a fairly powerful Kia plant. But it must be admitted that the domestically assembled Kia Sportage cars are significantly inferior to the Slovak ones.

Alas, there are really too many weak points. First of all, motorists who have purchased a Kaliningrad-assembled Sportage name are not very high-quality doors. The problem is that they walk very tightly and give the impression that they are not fully closed. All appeals of dissatisfied buyers regarding doors, official dealers comment very simply: "Depressurization of the cabin." Rarely does anyone manage to fix this problem on their own.

Also, quite often the Kia Sportage air conditioner of the Russian assembly fails. The problem lies in the fact that during production, its containers are not completely filled with the appropriate liquid. But that's not all. One of the tubes of the air conditioner has a sharp bend, which creates an unpleasant noise.

All problems can be corrected by contacting dealerships, but only within six months after purchase.

How to determine the assembly location of the Kia Sportage?

In order to determine the place of assembly of your Sportage car, you need to look at the VIN code. If this code starts with the characters XWE, then the car is assembled at the Kaliningrad plant. Korean cars are designated by the letters KNE. For Sportage, which are produced in Slovakia, use the VIN code with U6Y.

For those who do not know, this code is located on the inside of the windshield, near the windshield wipers.

Experts strongly recommend purchasing cars made in Slovakia. Ardent fans of domestically assembled cars need to know that in any case, all bodies are produced in Slovakia, even for the Kaliningrad plant.

It is interesting that the assembly process at the Slovak plant includes as many as 2000 actions, and at the Russian plant - only 20. Therefore, it is surprising why the cars from Zilina are of better quality than those from Kaliningrad.

Output

Kia Sportage is one of the most popular crossovers in Russia. They are assembled at factories in Korea, Slovakia and Russia. Only the products of the last two factories are supplied to the domestic market.

The highest quality cars are made at a factory in Slovakia.

We hope that our article has become as useful as possible for you.

kiaportal.ru

Where is Kia Sorento collected for Russia and other countries

If we carefully analyze the domestic car market, we can conclude that Korean cars are very popular here. Among all the models, the automaker Kia clearly stands out. The products of this concern can boast of a modern appearance, fantastic technical characteristics and excellent driving characteristics.
Kia Sorento

Among the company's SUVs, the clear leader is the Kia Sorento, which is very popular among domestic motorists. Therefore, many Russians are interested in information about where they collect Kia Sorento and Kia Sorento Prime.

First of all, it is worth noting the fact that the Sorento SUV for Russia is produced at the Avtotor Kaliningrad plant. The assembly started back in 2013.

Also, for some time Sorento was made at the IzhAvto enterprise, but due to the unstable financial situation, very soon the production process was frozen.

Representatives of the company do not deny that in the future the production workshop of Kia Sorento may be opened at AvtoVAZ, but so far official information and terms have not been released.

In addition to Russia, Kia Sorento is also assembled at factories in Turkey and Slovakia. Do not forget about South Korea, where the most powerful enterprises of the company are located. Korean-made SUVs do not enter the Russian market, all products go to the local market.

The main advantages and disadvantages of Kia Sorento assembled in Russia

The Sorento midsize SUV has a very large following. Most of the models are produced at branches of two countries - Russia and Korea. Therefore, from the moment the assembly began, there has been a fierce dispute between motorists on the topic of which country produces better cars.

Experts unanimously declare that the Kia Sorento, assembled at the Kaliningrad plant, is not inferior in quality to its South Korean counterpart. This is confirmed by the fact that in parallel with Sorento, the company produces BMW cars. And, as you know, the Germans are meticulous in choosing a place of production.

At domestic facilities, the SKD method is used, and all parts, as well as components, are supplied from South Korean enterprises.

The Kaliningrad plant pleasantly surprises with the level of personnel selection, because several highly qualified candidates apply for one job at once, and in case of any non-compliance with production standards or company rules, severe sanctions are applied to the employee.

During production, the focus is on the welding quality of the body. This process is monitored by Korean specialists, who, by the way, also carry out the final control of the products.

Before the start of the assembly of the Kia Sorento, the production workshops of the Kaliningrad plant were modernized and equipped with modern equipment.

Relatively recently, a domestic enterprise began to produce a restyled version of an SUV - Kia Sorento Prime. First of all, the changes affected the exterior, the ground clearance also increased and the technical characteristics of the car significantly improved.

Also, the new Sorento Prime has become safer and more comfortable.

Features of the Kia Sorento assembled in Russia

As for the power units, a number of gasoline and diesel units are available for the SUV, with volumes from 2.2 liters to 2.4 liters.

It is worth noting that the Kia Sorento, which is equipped with the most powerful diesel engine in the maximum configuration, is capable of reaching a top speed of 200 km / h.

A car with similar equipment, but with a gasoline engine, is capable of accelerating to a maximum of 176 km / h.

It must be said right away that the Sorento SUV is definitely not an economical car, as the representatives of the Korean company have already said more than once.

Sorento with a petrol unit in mixed mode consumes 9 liters of fuel per 100 kilometers. For a diesel engine, this figure is much less, since a car with a "mechanic" consumes only 6 liters.

Good performance indicators are encouraging. For example, it takes only 11 seconds to accelerate from zero to hundreds of kilometers.

As a transmission, a six-speed manual transmission and automatic transmission are used for the Russian-made Kia Sorento.

There are two variants of the car, in terms of the number of passengers - for 5 and for 7 people.

Output

Kia Sorento, which is produced in Kaliningrad, is rightfully considered one of the highest quality cars in the class.

The domestically assembled SUV has a number of features and is perfectly adapted to Russian road conditions.

Analysts predict the Russian-assembled Kia Sorento a great future. Therefore, we can safely expect the emergence of new enterprises.

kiaportal.ru

Where is Kia Optima assembled for Russia

Back in 2000, the process of assembling the Kia Spectra car was launched. It was a brand new Korean car that Russian customers liked right from the start. In addition, the quality of the first and subsequent games was at a good level. Consequently, a quite expected decision was received from the Koreans - to expand and improve the production of cars in Russia. What happened as a result? Russia has become one of the countries in which the assembly of the Kia Optima is carried out.
Photo: Kia Optima

Some argue that this car is only assembled in South Korea. This was true, but only until 2014. Since then, production has been established in Russia and in the United States.

It is worth noting that there are no factories in European countries at all. The question arises: why is this? This is because Korean factories are able to cover the demand for this model.

Where is it assembled and in what configurations?

The fundamentally new Optima has been slightly increased in size: 10 mm in length, 10 mm in height and 25 mm in width have been added. The general indicators were as follows: 4855 mm, 1465 mm and 1860 mm, respectively. The boot volume was also changed and ended up at 510 liters, which is 5 liters more than the previous version.

There are 3 engine options to choose from. You will have to choose from 2.0 liters, 2.4 liters for 150 and 188 hp. respectively. Well, option 3 - a 2.0-liter turbocharged engine with a capacity of 245 hp.

Kia Optima cars for Russia are assembled in the city of Kaliningrad, and a fairly well-known company, Avtotor, is engaged in this.

Thanks to the vast experience of work, as well as the high qualifications of the personnel, a high level of quality of the produced foreign cars was achieved.

At the plant, only the assembly process takes place, all components are supplied from Korea.

What is the difference between Russian and Korean assemblies?

Based on this, that all parts are supplied from Korea, and Korean engineers are directly involved in quality control, the models are almost identical.

Owner reviews

The opinions of motorists differ. One half claims that there is absolutely no difference between local and Korean builds. Well, the second one says that after a certain time of using the car, roughly speaking, it turns into a "bucket of nuts". How do we see it? It was said above that the supply of parts comes from Korea, which means that there are several stages of verification - before shipment and after receipt. And what do you think, at what level is the quality? Not only are the parts checked, but in the end, a thorough analysis of the already assembled car is carried out.

If we compare the assembly of the USA, Korea and Russia, the only difference will be the engines and body colors. Of course, there will also be those people who fundamentally do not trust the local assembly and are looking for foreign counterparts by all means.

Ultimately, it's up to you to decide.

kiaportal.ru

Where is Kia Soul collected for Russia in 2017-2018

The well-known automotive manufacturer Kia has a feature that consists in assembling vehicles where their subsequent sale will be carried out. This feature began to appear in the Korean company already in the mid-2000s, when the Spectra model was being assembled at the Izhevsk plant. Today, a completely different Soul model is popular. Users want to get an answer on this about where they collect Kia Soul for Russia.

Production options

You can consider three options where Kia Soul is collected for Russia:

1. Most of them are produced in Kazakhstan.
2. Directly in Russia in Kaliningrad there is an automobile plant "Avtogor".
3. And, of course, South Korea, which is considered a historical homeland.

So you can find completely different options for assembling a car from a Korean manufacturer. It is worth noting that information leaks on the network about the assembly of the Kia Soul by factories in China, with which partnerships have been built. Some of them are sent for sale to Russia, and some are exported to numerous countries around the world.

It will seem to everyone that there will be a distinctive feature between all such models. Everything will depend on the specificity of each specific plant. So, for example, Kaliningrad has a peculiarity, namely "screwdriver production". Directly spare parts, components are not produced here, as they come ready-made. The workers only twist them together. The finished car is assembled only from the elements of the Korean manufacturer. Not a single part of domestic components is used here. That is, there is not much difference in production.

This applies to all other factories where Kia Soul is assembled for Russia. All of them receive ready-made kits, after the connection of which a popular car is already coming off the assembly line. Components are sent to Kazakhstan and the same China. The regional factor has no effect.

What is popularity?

A lot of doubts creep in, due to which the presented car gained popularity on the territory of Russia, where the "pretentious" body shapes are of interest. Everything is manifested in the ease of use of transport, its functionality.

In addition, Kia Soul became the first representative of the compact crossover class, which began to move along the roads of Russia. It is distinguished by sufficient ground clearance, acceptable dimensions. It is very easy to operate and has a decent quality. All of this together increases the demand for the car, which manifests itself in sales. Their number has not dropped since 2014. And 2015 was marked for the Korean-made model as the best-selling among the representatives of the Russian market.

The car also has versatility, as you can safely drive it out of town, regardless of the time. After reviewing a large number of reviews on thematic forums, you can easily cope with average off-road conditions on Soul. That is, if the weather is normal, you can ride through the forest. Broken ruts, as well as snow porridge, will not be able to approach here. A "Korean" for such an element will not feel confident. An urban crossover, in fact, is not intended for this.

moihyundai-creta.ru

Where is Kia Soul collected for Russia and other countries

If we analyze the situation in the automotive world, we can come to the conclusion that the market is flooded with the products of Korean auto companies. And this is not surprising, because South Korea has always been famous for its powerful enterprises that produce high-quality, inexpensive cars.
Photo: Kia Soul 2016

According to experts, such a high popularity of "Koreans" is due to the fact that each company aims to open a large number of its branches in the world, and the cars that are assembled there are not sold to local markets. This allows you to save money on transportation, and, thus, to establish a low cost.

The Kia company was no exception. Russian motorists were able to see this for themselves in 2005, when the Izh-Avto plant began to make the Kia Spectra model.

In today's article we will talk about the places of assembly of another car - the Kia Soul crossover. Where is Kia Soul produced?

First of all, it should be noted the Kaliningrad plant Avtotor, which has been cooperating with the Korean company for quite a long time, and supplies cars both to the local market and to the CIS countries.

Another branch is located in Kazakhstan, but in terms of capacity it is significantly inferior to the Russian company. But, nevertheless, he collects a significant number of crossovers for Russia.

Also, on Russian roads, you can find Korean-made Soul. It is the enterprises in South Korea that are considered the main and most productive, so it is not surprising that their products are supplied to all corners of the world.

Recently, information appeared that the assembly of Kia Soul has begun at Chinese enterprises, and the first batch has already hit the local market. According to experts, soon the Chinese branch will catch up and surpass the productivity level of the South Korean facilities. Most likely, cars from China will be delivered to Russia.

Most car enthusiasts may have a logical question: "Are there any differences between cars from different countries of manufacture?" The answer is simple - more likely no than yes. For example, at a Russian enterprise, only the final assembly cycle is carried out. In more detail, parts and components are supplied to Avtotor ready-made from South Korea, and they are assembled at a domestic plant.

Therefore, due to the fact that domestic-made parts are not used, there are no special differences between different assemblies.

The same situation is at the Chinese and Kazakh branches, where parts are supplied from South Korea.

Reasons for the popularity of the Kia Soul car

After the official presentation of Kia Soul, the automotive world was very surprised. It's all about the extraordinary appearance. Indeed, it is very difficult to find a crossover with the same defiant and bold exterior.

Most of all, I was surprised by the fact that Soul, despite disappointing forecasts, has gained great popularity in the Russian market. But how did he do it? It's all about the wide functionality of the Korean car and the level of comfort.

It is noteworthy that Kia Sol bears the honorary title of the first compact crossover that appeared on the roads of Russia. Among the main advantages of a car, which directly and positively affect the level of sales, it is worth noting:

• compact size;
• optimal clearance;
• excellent management;
• high quality.

The peak of sales in the Russian market was in 2014, but at the moment this figure is quite decent.

In principle, Kia Soul can be called a completely universal car. Of course, this does not mean that the car freely overcomes "difficult" rough terrain, but outside the city, especially if it is a forest road, it feels great. Countless positive reviews from owners and experts can confirm this.

The main enemies of the Kia Soul are muddy roads and mud, but the same can be said for most crossovers.

A bold appearance, high-quality interior and excellent dynamic performance - this is what makes the Kia Soul one of the best-selling crossovers of our time.

Output

At the moment, one of the best-selling crossovers in Russia is the Kia Soul. The car is produced at the Kaliningrad enterprise, as well as at the facilities of South Korea, Kazakhstan and China. Each of the options can be found on domestic roads.

Among the main features of the car, including the Russian assembly, is its unique appearance, fantastic dynamics, high-quality and comfortable interior, as well as low cost.

The car has been nominated for “Best Car of the Year” and “Best Crossover of the Year” awards more than once, and in 2015 it became the best-selling Korean car in the world. And this is far from the limit.

kiaportal.ru

Where is KIA Sportage assembled?

Kia sportage is very popular in the Russian Federation, and, in principle, throughout Europe, it is here that one of the main factories is located. Today we will tell you about two factories from where Kia cars can be supplied to Russia.

The plant in Slovakia is a state-of-the-art plant, located on 223 hectares of land. It is the largest enterprise in ilina and one of the largest in the entire Slovaks. In 2000, Kia decided to build a plant in Europe. As a result, Slovakia won the tender and received about $ 1 billion in investments. Today, about three thousand people work there, with the plant's design capacity of about 300 thousand vehicles per year. The plant was built in the shortest possible time, the help of the government of Slovakia, for which this enterprise was simply necessary, affected here.

In Russia, Kia is assembled in Kaliningrad at the production facilities of the Avtotor company. By the way, it also produces BMW and GM cars.

Where is the best Kia Sportage collection?

This is more of a rhetorical question. Sportage is completely assembled in Slovakia, then disassembled into car sets and sent to Russia. The number of operations performed in the Autootor is minimal. For comparison, in Slovakia, for the Assembly of Kia Sportage, about 2000 operations are done, and in Russia, only twenty.

Recently, Korean cars are becoming more and more popular. We are talking about cars of the "KIA" brand. In this material, we would like to consider where the KIA Sorento is collected before it falls into the hands of our customers.

Plants where KIA Sorento is assembled

Almost all cars from KIA are made where they will then be sold. And KIA Sorento is no exception to the rule. This mid-size SUV was assembled in factories some time ago:

• in Slovakia;
• in Turkey.

In Russia, they were made at the Izh-Auto plant. Then very few of them entered our market. But now the car is being assembled in Kaliningrad at the Avtotor production facility.

The conveyor was launched here back in 2013, and after that many motorists are thinking about whether it is worth buying a car of our assembly. After all, those that are made in Korea reach us through Vladivostok and in extremely scanty quantities.

Pros and cons of our build

You can argue endlessly about whose build of the KIA Sorento is better. The most ardent opponents argue that our engineers produce outright substandard products, while the rest of the factories produce only masterpieces. But, in fact, Russian foreign cars are no worse than foreign ones.

To begin with, all components for KIA Sorento are supplied from Korean manufacturers.

Also, body rental is well controlled. And, the staff adheres to a tight schedule with continuous professional development.

After the Koreans introduced a new generation of the car, our engineers carried out their own modernization. They redesigned the design a little, made more powerful engines, improved safety and build quality, and also changed the ground clearance, which improved handling.

With the help of this, the car became a competitor for such models as Toyota RAW 4, Honda CR - V. It can be either front-wheel drive or all-wheel drive, depending on the customer's wishes. Competitors do not have this, since they only produce four-wheel drive models. Also, a front-wheel drive car is much cheaper to produce. This is what creates a very diverse price category. The base cost for the cheapest option is $ 2,400. The six-speed gearbox in the Russian version of the car makes the car more manageable. It gives the driver more options.