Gasoline cars on radio control do it yourself. How to make a radio-controlled machine yourself? Homemade car with a simple remote

Instruction

An independent assembly of the machine on has several advantages. You will not only save, but you can do exactly what you want. First of all, decide the amount of the amount you are willing to spend. The range of spare parts and types is very large, price variation is also very large. When the amount is determined, proceed to the development of a small building plan. Decide what typewriter you want. You can make it simply on wired control, and you can use a radio control that will cost somewhat more expensive.

Select the chassis for your future typewriter. Now you can find a huge number of different chassis, all of them are interchangeable. When buying, pay attention to the quality of the details. There should be no enclosures and jar on plastic parts. The front wheels should be easily rotated. Wheels are usually sold with the chassis. They should also pay great attention. It is best to buy wheels with rubber, as plastic has a very bad coupling with a surface.

The next step is to choose a motor. This is the most important step, as you choose the heart of your future typewriter. From him, the dynamics and technical characteristics of the future model will largely depend on it. There are two types of motors for models - electrical and gasoline. Electrical motors are unpretentious in service and have a relatively low price. They are very economical, as they feed from batteries that are easy to recharge. Gasoline engines have a greater power, but cost more and require careful care. Yes, and special fuel has a significant price. If you are new to modeling, then boldly choose an electric motor. You will save money and time.

Now you need to decide what type of control is wired or wireless. Wired control is cheaper, but the machine will ride only within a radius equal to the length of the wire. Radio block is a bit more expensive, but allows you to drive a car at an antenna coating distance. It is best to overpay and buy a radio roll. Also think about the hull of your car. On the store shelves you can find the buildings of almost all modern auto models. You can also make a housing in your own unique sketch.

Now you need to collect all components. Take the chassis and attach the motor and radio roll. Install the antenna. Together with the components, you must sell the assembly instructions in which you will be able to find the compounding scheme in detail. Install batteries and antenna. Adjust the motor operation. When everything is synchronously working, attach the car body on the chassis. Now it remains only to decorate the machine to your taste.

Toys are now interested not only by children. Many adults acquire accurate copies of auto-known brands or fit radio-controlled models machines. Media of the proposed assortment of toy stores can not always be found the option that will fully arrange a client. In some cases, it is much better to make a radio-controlled machine model yourself, your child will appreciate your efforts. The present gathered with his own hands from the primary means is much more valuable for a bright typewriter purchased in an expensive toy store.

You can make an independent typewriter on a radio control, using our serial algorithm. Modeling from one finished model of machine to another is very similar to the actions of the masters in the auto repair shop.

To create a managed machine with your own hands, you need to have the following items:

Electric motor;
Small car body;
Durable chassis;
Removable wheels;
Set of mini-screwdrivers;
Detailed instructions for accessories.

Undoubtedly, self-harvesting machine on the remote has a lot of winning benefits, namely:

Saving funds, while you will have the model of the machine you wanted;
You can choose the desired model from the proposed range of spare parts and varieties of the bodies;
You decide - make a mini-typewriter on a wired remote, or use the radio control, which will have to spend a large amount.

After you decide on the model, follow the following an actions algorithm:

We select the chassis for your model, pay attention to the quality of all small details. No inclusions and jar on the surface of plastic should be seen, the front wheels must move smoothly;
When selecting wheels, special attention is paid to models with rubber, since completely plastic models have a hitch surface of low quality;
To the choice of the motor, come with all seriousness, as this is the main heart of the mini-machine. There are 2 varieties of mini-motors for machines - electrical and gasoline. Electrical motors are distinguished by the availability and ease of use, they fueled from the battery, it is very easy for a new charge. Gasoline options have greater power, but they are more expensive, require delicate care. They need to pour special fuel. Electromotors are suitable for beginners in the field of simulation of toy machines;
It is necessary to determine the type of management - wired or wireless. Wired control is cheaper, but the machine will move only in a limited radius, while the radio-controlled model will move within the reach of the antenna. Radio block is much more efficient for mini-machines;
The body of the future machine also deserves increased attention. You can choose a finished body or make a personal sketch.

After all the details are purchased, you can start assembling.

To the chassis is secure a motor and a radar. Mount the antenna. Together with the components, detailed instructions for assembling the entire typewriter should go. We establish a motor operation. After everything is regularly functioning, fix the durable mini-machine case on the chassis. Now you can decorate the created model at your discretion. Letter with a powerful motor.

Many will find the idea of \u200b\u200bcollecting a typewriter with a motor for his child very strange, because there are many ready-made options on store shelves. But if you strive to show individuality and earn the authority in the eyes of your child, you can take on the assembly of the typewriter with a motor, even though it is not easy, but the result will justify all efforts.

The optimal option is to build a radio-controlled model. It will require certain skills and knowledge of small electrical engineering, because this mini-machine is a rather complex mechanism, despite the compact dimensions. All important details must be purchased.

We start learning the control panel. From the correct assembly directly depends on the movement of the car, the ability to overcome obstacles, make beautiful maneuvers. Many autosochetics use a three-channel console of a pistol species, which can be assembled independently.

You can go on a simple way - to get a special designer, where the kit contains all the necessary parts, their detailed schemes and finite drawings of ready-made models.

Engines for future radio-controlled models can be electrical or internal combustion. Internal combustion engines produce gasoline or calils operating on the composition of methanol, oil and nitromethane, a special gas absorption mixture. Approximate volumes of such engines range from 15 to 35 cm3.

The approximate volume of the fuel tank in such machines is 700 cm3. It provides the engine uninterrupted work for 45 minutes. Many gasoline models have a rear-wheel drive, an independent suspension is mounted on them.

Today, there are many collapsible models intended for autosochetics. Among the leading manufacturers, mini-machines are worth allocating ABC, Protech, FG Modelsport (Germany), HPI, Himoto (USA). Their main feature is the similarity of mini-models with real prototypes. After the assembly is completed on the applied instructions, install a charged onboard battery, a battery into a transmitter, fill a small amount of gasoline into the tank. You can safely run your iron horse on the road.

Modeling cars at their own desire is a fascinating hobby, especially when the result exceeds all expectations. First you need to purchase a stand model Range Rover, from it we will do a jeep, freely disseminating off-road. You still need to take the working electronics from the old jeep, we will be recorded in the SUV.

From copper pipes soldering iron bridges and differentials. It we are fastened to powerful wheels of the SUV. It is necessary to ensure that all compounds are firmly brewing. We closed the accurate differentials with caps from tablets. From above covering all the place of the discharge of differential by the usual auto email. We put bridges on the frame and perform steering traction. Steering thrust can be taken from the old disassembled machine. After installing the plastic bottom, we cut the hole there required for the installation of the gearbox, cardan shafts. The gearbox costs the engine from the aircraft, also quite powerful. The model is moving not by jerks, but smoothly, this is the most important condition for such models. It is difficult to make a gearbox, but here you can show all your smell. Reducer tightly fix it to the bottom, fasten the bottom to the frame. Now the installation of electronics, shock absorbers, battery. At the end there is painting the body of the car, the installation of the main nodes, headlights and much more. Paint is applied in 4 layers for conventional plastic. The author found the original photo of the car and made it a mini-copy in the toy version. So that the model is not afraid of moisture, the electronics is covered with a special composition. To impart the effect of the antique, the outdoor surface of the machine after painting. The battery actions in such a model are enough for 25 minutes of continuous skating.

To create such a simple model, we will need the following list of small parts:

Microcircuit for radio-controlled machine;
Remote Control;
Steering element;
Soldering iron with a solder;
Compact electrical device;
Battery with charger.

The procedure for this:

We collect the bottom of the car, that is, the suspension;
For this purpose, a durable plastic plate is required, it will be the basis for this model;
It is attached to the chip for the radio-controlled machine, we solder to it, which serves as an antenna;
We solder the wires from the electric motor;
Battery wires fix to the correct points of the chip;
Fix the wheels taken from a simple children's typewriter;
All items can be fixed, just not faltered when used.

Fresh steering elements, it is impossible to do it with glue alone. The front axle needs to be coated for a stronger fixation. Fresh battery on the microcircuit. Now the machine is ready for testing. It must function. Management of such a machine is performed using the remote. Following this instruction, you can easily make a new typewriter on control. If there is a desire to design with your own hands, then this is a guide however, by the way. Made with your own hands the toy pleases much more than the model bought with your own hands.

To collect this model, we will need the following components:

Simple model of any production machine;
VAZ parts for opening doors, 12-volt battery;
Equipment for the organization of radio control;
Durable batteries with charger;
Radiator;
Electronically measuring equipment;
Small soldering iron with a solder;
Locksmiths;
A piece of rubber to ensure the enhancement of the bumper.

An exemplary collection diagram of the radio-controlled model is shown in the figure.

Go to reading and collecting a scheme, to a fascinating process creating a unique mini-machine. First we take the collection of suspension. We take vaza connections and gears to collect reducer. On the hairpins and the case you need to cut the thread to hang gears and solenoids. Connect the gearbox to the power, check, after which they fix on the typewriter. To effectively protect the system from overheating, install the radiator. The plate from it can be firmly fixed with ordinary bolts. Next is the installation of the microcircuits of the power driver and radio control. Fully install the car body. Our mini-machine is ready for real tests.

You have a machine on radio control. You are striving to make it more maneuverable, but do not know how to do it?

Do not overload the model with additional systems and unnecessary small details. Sound signals, glowing headlights are all the amenities, they look great, but the independent process of collecting a radio-controlled typewriter and without it has certain difficulties. The complication of parts can adversely affect the important driving parts of the car. The main point, on what to focus on is to create high-quality suspension, ensuring reliable signaling.

To improve the indicators of maneuverability and optimize high-speed parameters, the system refinement is suitable during test races. These recommendations will help to delve into the business of auto. You can independently create a machine that will be a real copy of a large model. All items will be similar, only your option will be in mini-format.

PLEASE SINK - Make a machine with him on the control panel

You can start with a simple - collect the machine-designer on the remote. First you need to come up with a project: what your typewriter will look like, how to move, view other details. To start immediate assembly, you need to prepare not only all the important components of the components of the future iron horse, but also the necessary devices. To start a fascinating joint lesson with son, we take the following things:

Little Motor, you can borrow from the old vein or a household fan;
Durable frame;
Mini-rubber kit;
High-quality suspension for a small chassis;
2 durable axes for wheel fixing;
Wireless antenna;
Thin wires for connections;
Quality batteries for battery or special gasoline;
Collected signal receiver;
The old control panel will suit a simple transmitter or an outdated radar.

From the devices will require passas, a small soldering iron, screwdrivers of various diameters.

Order assembly

During the process, fees may find out that some missing details will have to buy either borrow from old, broken sweatshirts. After all, he will sacrifice for the sake of a cool novelty, isn't it?! Rama and body take the old samples of the toy son. The selected motor is tested in advance for maneuverability and performance. The power of the engine should not go into incision with the weight of the machine, because the weak motor will not pull the heavy construction. Batteries must be unused. Phased action when assembly are as follows:

First we collect mini-frame;
Then fix and adjust the serviceable motor;
We enter the batteries or a compact battery;
Next is fixed antenna;
The wheels are mounted so that they can turn freely, turning along with the axis. If this condition is not fulfilled, the machine will move only back and forth.

For the future iron horse, it is better to take rubber tires, because they best show themselves on the open soil. If the assembly process was sufficiently easy, you were able to figure out all the intricacies of the primary auto-forming, you can make it possible to make several samples, you can give another instance to give a neighboring boy. They will arrange the race on the open soil on the street.

The assembly of a new unique typewriter is a fascinating process, followed by not one evening dad and son. To turn it into a productive case, you can follow the following recommendations, they must be taken into account when assembling a modern toy:

Make a sketch of the future model you want to collect or use the ready-made instruction for the collection;
Purchase all high-quality machine parts;
Additional details can be taken from old machines or purchase new;
Before installing, carefully test the selected motor, this is the heart of the machine;
Do not save on batteries for a new model, let them be new and unused;
Firmly fix all the details according to their sequence;
Examine schemes for creating similar machines in advance to facilitate the assembly process;
Choose the finished model or come up with something your own, unique.

Following these recommendations, you easily make it easily make the selected model of the machine. You can make and collect accurate copies of the original cars when you reach a certain level of skill. Collect together the machine in the family circle - this is the best way to efficient leisure organization for yourself and your child.

The machine, collected by his own hands, will be valuable for his children, because the real father's feelings are embedded. As a collected form, the model will ride in the selected direction and easily maneuver. You will be able to learn how to make a simple type of machine, following the recommendations from the proposed video. Start your way in the world of autocratic!

Psychologists say that a joint business promotes children and parents. Dad for a boy - always and in all. Unfortunately, the fathers do not always understand what to do with the child, except for watching the TV. We offer to learn how to make such an occupation will like both "boys": and son, and father. In this process, mom is likely to intervene. Just because of its ignorance in radio.

Occupation only for dad and son

Sometimes it seems that they care about the child's raising of the child, and the fathers only make money. However, the role of dad in the formation of the character of the baby, especially the Son, not less than Mamina. It happens that the tired father is underwritten to play with his chance in his noisy and fun games. However, you need to remember that the moment may come when the son will simply stop looking for the opportunity to chat with dad, if he constantly finds for this time. In the end, the misunderstanding between the dad and the son comes, which in adolescence is already quite difficult to overcome. A ready set or an independent attempt to figure out how to make a typewriter on the control panel will help your father and child strengthen their relationships and mutual understanding.

What is the cause of paternal removal from the son? Sometimes it is common inexperience, a certain fear that appears in young dads, especially if the mother practically does not let the father for the baby.

Where can I start a joint creativity

The easiest option (if you do not take into account the usual purchase of the finished model) - the machine-column-collected manual. Included all necessary details, you only need time and effort. A couple of evenings after work - and ready to the radio-controlled toy. And how much joy will get the son, and dad, when the model will go!

Another, more complex option - inventing and collecting the machine "from scratch". In this case, it will take more time, and the details will have to look, and the general work, the joint thing will bring more emotions.

What to choose: copy or just a brand machine

Some advanced craftsmen create and collect accurate mini-copies of real cars. This happens like this:

first, the machine on the remote control is carefully assembled, while family efforts;
secondly, the model can not be made of those materials that the original;
thirdly, some minor small details can be omitted.

Everything else, up to the engine and fuel, is performed with scrupulous accuracy. Some masters are engaged in assembling collection models that are accurate copies of real, real cars.

On the control panel? You can collect a half-breed, that is, an instance resembling the selected original in appearance. And you can come up with a model "on a free topic", not focusing on some kind of definite form. The size of the machine, in principle, do not matter. Make small homework, jeep or passenger cars, and real radio-controlled mini cars. It all depends on the desire, allocated time and finance. Any activity that the son and dad are busy will strengthen the authority of the father in the eyes of the child.

What parts to prepare to make the model go

How to make a machine on the control panel? Everything starts with the project. To work, it is necessary to prepare not only a list of different parts and components, but also all the necessary tools. This will make the process more fascinating and organized. So what is needed to build a car:

motor (from a hair dryer, from a small fan) or a gasoline mini engine;
frame;
body;
set of rubber wheels;
the fact that real cars are called "shaft";
suspension or chassis;
2 axes for installing wheels;
antenna;
thin connecting wires;
rechargeable batteries for powering the electric motor or gasoline (if the engine is the engine);
signal receiver;
control panel (transmitter or radar).

The tools will need passatatia, soldering iron, different screwdrivers and small wrench, tape, superchalter, bolts, washers, nuts and other fasteners. All missing tools, parts and components are either made independently or bought in specialized stores.

How all this is done and what will happen in the end

Preparing the details according to the plan of how to make a machine on the console, you can find that some of them need to be bought. Rama and body can be adapted from the old toy. Surely at home there are several boring or broken children's cars, from which some missing parts can be taken.

Motor need to check in advance for performance. Its power must correspond to the weight of the future of the car. A weak engine will not pull a heavy model. All work can go to zero. Batteries must be fresh or accumulative. This assembly sequence is:

First collected frame.
Makers are fixed and adjusting the motor.
Install batteries or battery.
The next action is fixed antenna.
Wheels are installed so that they can easily spin with the axis. If this is not done, the machine will not be able to rotate, it will ride just right: ahead and back.

It is preferable to take rubber tires, as they are better moved not only on the floor of the apartment, but also in the open soil. If you like the process and it will be possible to understand well how to make a typewriter on the control panel, you can build several different copies, teach neighbors' neighborhood and boys and arrange mini-rings on rough terrain right in the yard.

Some people even having become adults did not lose interest in different games. Someone collects the designer, someone plays in board games, and someone very much like machine on the console. Of course, this passion has a more adult, compared to the nursery. And many fans machines dream about to get such an exhibit to themselves, which will not have anyone in the world. Nothing is simple! Learn how to make a machine on the remote yourself.

To begin with, you need to decide which details will be necessary to create a machine. So that you missed anything, below is located, the list of necessary components:

Electromotor or gasoline engine
Body
Chassis
Wheels
A set of screwdrivers of different sizes.

Making a typewriter with your own hands, you can control the entire process of creating, and then you will get exactly what they conceived. Plus, you will save money, and if you put a case on stream, you can do well on this. First, decide on the amount of money you can spend to purchase parts for the machine. The cost of the same types of components may vary depending on the material and quality of the product. Do you want to make a machine on a control panel with wire or on radio control? Here, when choosing, you need to consider that the parts for the wired console will be somewhat cheaper.

Wheels and chassis

Now you need to provide a chassis typewriter. You can try to make it yourself, but it is better to buy it ready in the store. Moreover, the wheels are sold with the chassis. When buying, pay attention to the quality of the product. The front wheels must turn with ease, and the tires are better to choose from rubber, because they give the best grip with the road.

Engine

Now you need to choose the engine of the machine, and this is perhaps the most important thing, because the motor is the heart of the car. You can use an electromotor from some technique, and if there is no such, then go to the store again. There can also be purchased and a gasoline engine that is much more powerful. True, it is necessary to care for it, buy gasoline, and it costs an order of magnitude more. So it is worth staying on the electric motor, and it will save you money and time.

Remote Control

Now it's time to take up the control panel. If you decide to make a typewriter with a wired console, do not forget about its main drawback - the car will move only at a distance that will allow, the length of the wire. If your choice fell on a radio control, then for the assembly of the remote you need a radar. Despite the fact that it is not so cheap, it is better to acquire it, as this will allow you to control the machine at a fairly large distance that covers the antenna.

Body

The next point is the body. Here you can show all your creativity, and make it yourself, pre-drawing sketches. Although this item can be purchased in the store.

Assembly

Now we have all the necessary details, and you can start assembling. As a rule, detailed instructions are attached to the components. The whole sequence of actions is described. Then make the adjustment of the motor and the installation of batteries and the antennas, and only then you need to attach the body and chassis.

Now you know how to make a typewriter on the control panel.

Buy a radio-controlled device today is not a problem. Both car, and train, and helicopter, and quadcopter. But it is much more interesting to try to create a radio-controlled car with your own hands. We will present you two detailed instructions.

Model number 1: What will we need?

To create this radio-controlled model, you will need:

Machine model (you can even take the usual Chinese from the market).
Arua car.
Solenoid opening the doors of the car VAZ, battery 2400 A / h, 12 V.
Cut rubber.
Radiator.
Electro measuring instruments.
Soldering iron, to it - solder, as well as plumbing tools.
Reducer.
Collector engine (for example, from a toy helicopter).

Model №1: Instructions for creating

And now we proceed to create with your own hands of the radio-controlled machine:

Model number 2: Required components

To create a car you will need:

Car model.
Spare parts from an unnecessary collectible typewriter, printer (gears, traction, iron drives).
Copper tubes (sold in construction stores).
Soldering iron.
Automal.
Bolts.
Required electronics.
Battery.

Model number 2: Creating a device

We start to make your own hands a radio-controlled machine:

In conclusion, imagine one of the drawings for radio-controlled models of machines - a receiver schema.

The self-made radio-controlled car is a reality. Of course, from scratch it will not work it - develop your experience on simpler models.