The most unusual homemade cars (20 photos). Cars created by their own hands Ideas for the car do it yourself

Now you can not study the tons of thematic literature and not to disappear at the Multi-month courses of masters to solve any task. Just with the car. On the Internet you can find a wide variety of master classes and advice on creating a self-made car, be it a sports car or a regular tractor. But what materials are they made from? How to draw the right drawings? And what else can be made with your own hands for a homemade car?

A bit of history

Manufacturing homemade passenger cars began a few more decades ago. Of particular popularity and distribution, this occupation gained in the times of the USSR. At that time, the production of exclusively mass models were established, in which there were many errors and flaws, as well as almost complete absence of comfort. Therefore, by Russian craftsmen created individual cars from a variety of remedies.

Most often, a new car was collected from several non-working old. Also for settlements and villages, ordinary cars were reworked into real cargo. For this, the carrying capacity has increased and lengthened the body. There were models that easily overcome any water obstacles.

Legislatives such homemakes were not prohibited. Some restrictions were introduced only at the Sunset of the USSR, but they practically did not interfere with personal production. There was a huge number of tricks and gaps in the laws, thanks to which many hundreds of hand-made machines were registered in those days.

What is required for homemade cars

Before collecting your own vehicle, you need to thoroughly think over every step and all parts of the upcoming work. First you need to decide on the main purpose of creating the machine. The design and possibility of future transport depends on it. If a universal farm assistant is required, capable of raising a significant cargo and pass any obstacles, it will be necessary to stock special items and materials, and also focus on the enhanced design. In the case of creating a sports car or any other feshne car, you need to think about the appearance.

In addition, various components are needed to work with motorcycles, motor collections and various trailers. However, in any case, a homemade car, with their own hands created, requires the presence of several wheels, steel sheets, special bolts for metal structures, steering wheels, transmission, screws, etc.

What materials are better to use

The design of the car is not easy. The machine must be safe for both the owner and others. Therefore, high-strength and wear-resistant materials should be used. In addition, you can not forget about comfort.

Most often, craftsmen use metal and wood in the design. For equipping and comfort, glass, plastic, various fabrics and leather, rubber, etc.

In addition, each particular case material has its drawbacks and advantages. For example, a homemade car from wood will be much cheaper than the same, but of iron or plastic. It is known that before the beginning of the 40s, all carcasses for transport were made from a tree. But such material makes the car less safe, as well as it is impracticious and short-lived. In addition, the weight of such a vehicle is quite large.

It is easier and more practical to use various metal structures in the work or the corresponding elements of old cars.

How to make drawings

Any serious project requires training. Therefore, before starting to make any homemade car with your own hands, you need to draw a detailed plan and drawing of the future design. You can use several sketches: a common vehicle view, as well as a detailed picture of each element. To do this, you will need big watman, pencils and erase, paints and rules, as well as other stationery.

The easiest way, owning modern technologies, make drawings on the computer. In addition, for this there are many special programs, such as "compass", splan or autocade. You can also make diagrams and Word. Each similar application has its own characteristics and advantages.

Now you can create absolutely any homemade cars. Drawings, folk craftsmen are of the universal review. Then they can be printed in any convenient format.

How to remake a personal car

Describing an absolutely new model of vehicle is not for everyone, therefore, one or more old, taken from the metering of machines are most often used. In our country, it is usually "Zhiguli", "Volga" or "Cossacks". They are reworked for different purposes: for children's carousels, heavy cargo transportation, driving in particularly dangerous conditions, etc.

Many vehicles claim that they start collecting a new car with a small one. At first, some elements of old personal machines are reworked, then add some new items. And after that, the completely new model is constructed at all. The converted hybrids are very interesting, capable of riding equally well both in the land and in snow or water.

Register a homemade car

So, not one month passed, and you finally constructed and collected your own homemade car. But to be able to safely and freely ride it, you should go through the registration procedure. And for this you need to make some difficult steps. It should be noted that only those cars that weigh more than 3.5 tons are subject to registration, any semi-trailers and trailers, motorcycles and motor scooters are also drawn up.

Initially, the correctness and reliability of the design of the machine is checked. This deals with a special testing laboratory. Here are the main parameters, without which the safe operation of the device is impossible. After carrying out the necessary tests, the owner is issued with these conclusions, as well as with official documents for the parts used in the transport, contact the traffic police. Certification of the Road Safety Institute is also needed.

The MREO takes a certificate of the absence of an identification number. To obtain a new one should contact the traffic police and all the documents received. Then on your own car you go to the MREO for final registration.

Fixtures for transport with their own hands

Make a homemade car is just the beginning. You still need to create all the conditions for more comfortable and safe operation. We need all sorts of lighting devices, fans, additional accessories, etc.

For example, you can make a special launching device to start the car during the cold season. The industrial sample will hit the pocket well, and the homemade device will help significantly save a family budget. To do this, you will need transistors, switches, diodes, resistors, connecting wires, etc.

Individual anti-theft devices are also fairly popular. Such homemade cars for the car helps to ensure the safety of the machine in any conditions. The simplest consists of only a single diode installed between the battery, a toggle switch and the voltage generator.

Several interesting facts about homemade

Of course, in this area there was no extraordinary case and episodes:

• The title of lowest car belongs to homemade Flatmobile. Its height is only 50 cm. It is possible to ride in it only on even smooth asphalt.
• For lovers of modern vehicles, jewelry companies have created rings with drawings in the form of various protector. Watching these products are quite original.
• Several British students constructed their self-made feature lies not only in speed and design, but also in the engine, because it works on hydrogen. This technique is absolutely safe for nature. Such homemade mini cars are designed for autobahn and cities.
• The legendary Henry Ford could not leave the creator's garage for a long time, because possessed impressive dimensions. Only breaking the wall, the master was able to take a novelty.

Nowadays, it is hard to surprise some new model of the car, but here the vehicle made by its own hands has always attracted attention and excitement. A person making a car with their own hands, expects two options for developing events. The first is admirable for creation, and the second is a smile of surrounding in the form of the invention. If you figure it out, there is nothing complicated in the car's own assembly. From self-taught engineer, it is only required to know the design of the car and the basic properties of its details.

Historical facts

The start of the construction of cars was preceded by some historical conditions. During the existence of the Union, the mass production of cars was carried out. They could not satisfy certain consumer needs. That is why self-taught inventors began to look for ways out of the current situation and made it by designing self-made cars.

In order to make one car with their own hands, three non-working, from which all the necessary spare parts were shot. If you take into account people living in deaf villages, then they most often have improved the various bodies, thereby increasing their capacity. Cars began to appear that had high patency and could even overcome water. In short, all the forces were thrown on simplification of life.

A separate category of people attached great importance to the appearance of the car, and not only its technical properties. In addition to beautiful passenger cars, sports cars were made, which were small in the factory instances. All of these inventions not only surprised others, but also became full parties to the road.

During the Soviet Union, there were no specific restrictions on self-made vehicles. Bans appeared in the 80s. They concerned only certain parameters and technical characteristics of the car. But most people could bypass them by registering in the relevant bodies of one vehicle under the guise of a completely different.

What is needed to build a car

To proceed directly to the process itself, it is necessary to think everything in detail. It is necessary to clearly understand how to make the future car, and what technical characteristics it should possess. First, it is necessary to determine for what purposes the car will be used, and then embody the idea. If a frank workhorse is required, in order to make it with their own hands, they will need special materials and details. It is also important to make the most resistant to the loads of the body and the car frame. When the car is done only for the ride, the question is only in its appearance.

How to make a car with your own hands for a child, you can learn from the following video:

How to make drawings

Do not trust your head and imagination, it will be better and more correct to think about what kind of car should be. Then all available considerations are transferred to paper. Then it is possible to correct something and as a result, it will appear as a hand drawn copy of the future machine. Sometimes two drawings are made for complete confidence. The first shows the appearance of the car, and on the second more detailed image of the main parts in detail. Before performing the drawing, you need to prepare all the necessary tools, that is, a pencil, eraser, watman and a ruler.

Nowadays, there is no need to draw a picture for a long time using an ordinary pencil. To facilitate this task, there are special programs with wide opportunities and with their help can be made any drawing.

Tip! If there are no engineering programs, the usual Word test editor will help in this situation.

With a big desire, you can make any car with your own hands. If there are no own considerations, then ready-made ideas and drawings can be borrowed. This is possible because most people engaged in the creation of homemade cars do not hide their ideas, but, on the contrary, represent the public.

Kit-kara

On the expanses of Europe and America wide distribution reached the so-called "Kit-Kara". So what is it? This is a certain number of different parts with which you can make a car with your own hands. Kit-karas have become so popular that many of their options appeared, which allow you to fold any desired car model. The main difficulty is not assembly, but in the registration of the car obtained as a result of the assembly.

For full-fledged work with Kit-Kara, you must have a spacious garage. In addition, you need tools and knowledge sets. If you do not have defined skills, then the work will not give the desired result. In the case of work with assistants, the assembly process will be faster and fruitful.

This kit includes everything starting from small screws and instructions to large details. For full-fledged work should not have serious difficulties. It should be noted that the instruction has no printed look, but is represented by a video master class, where everything is considered to the smallest details.

It is very important to collect the car correctly. This is necessary in order for creation to comply with all standards and standards prescribed in the regulatory acts of the traffic police. Since non-fulfillment of items leads to the problems of installing a vehicle in accordance with the relevant authorities.

Tip! If there is such an opportunity, you can consult specialists in this field.

In more detail about what kind of whale kira and how to do them, you can learn from the following video:

Construction of a vehicle with firing materials

In order to make the task as much as possible in the assembly of a self-made car, you can take the base of any other car that fully functions. It is best to take a fiscal option, because it is never known which way the experiments will lead. If there are old worn items, they need to be replaced with serviceable. If possible, you can make parts with your own hands on lathes, but this is if there is professional skills.

First of all, the assembly of the car must be started from the body, devices and the necessary parts of the cabin. Modern inventors for body use fiberglass, and before such a material was not, and plywood and tin material was used.

Attention! Fiberglass is quite elastic material, which allows you to carry out any idea, even the most extraordinary and original.

The availability of materials, spare parts and other components makes it possible to construct a car that in external parameters and the form will not give up the models of the cars of the world's most leading autoconcens. This requires ingenuity, good fantasy and certain knowledge.

Summarity, made by hand:

Construction of a car from fiberglass

Start assembling a car from fiberglass follows from the moment of selecting a suitable chassis. After that, the selection of the necessary aggregates is carried out. Then it is necessary to move to the marking of the cabin and the attachment of the seats. Upon completion of this, the chassis is strengthened. The frame should be very reliable and strong, because all the main parts of the car will be mounted on it. More precisely, the size of the spatial frame, the better the parts are docked.

For the manufacture of the body it is best to apply fiberglass. But it will pre-make the basis, that is, the framework. To the surface of the frame, you can attach foam sheets that are maximally appropriate to available drawings. Then the holes are cut into need, and if there is a need, the parameters are fitted. After that, fiberglass is fastened to the surface of the foam, which covers it from above and is cleaned. It is not necessary to use precisely the foam, any other material with a high level of plasticity will be useful. Such material can be a solid cloth of sculptural plasticine.

It is worth noting that the fiberglass has a deform property during operation. The reason is the effect of high temperatures. To preserve the shape of the structure, it is necessary to strengthen the framework of the pipe from the inside. All unnecessary pieces of fiberglass must be removed, but it should be done after it is completely dry. If everything is done correctly and there are no other works, relative to the design, you can proceed to the equipment of the cabin and the electronics fastener.

If in the future it is planned to restore, then you can make a special matrix. Thanks to her, the process of manufacturing the body will be faster and easier. The matrix is \u200b\u200bapplicable not only to make the vehicle with your own hands from scratch, but also in order to improve the condition of the available car. Paraffin is taken for making. To get a smooth surface, it is necessary to cover it from top to top. This will increase the convenience of fastening parts for the new car body.

Attention! With the help of the matrix, the entire body is made. But there is an exception - this is the hood and doors.

Conclusion

In order to implement the idea and make the car with your own hands, there are a number of suitable options. Here will be useful all kinds of work details.

With your own hands, you can make not only a passenger car, but also a larger and most powerful truck. In some countries, the craftsmen manage to make money on this decent money. They make cars under the order. Cars with various original body items are in great demand.

How to make Porsche do it yourself:

If you think that homemade is the lot of kids and bored housewives, we will quickly dispel your errors. This section is completely all devoted to the manufacture of homemade from automotive spare parts and rubber tires. You can make almost everything from the auto stroke. From garde shoes to a full-fledged playground with swings, fabulous characters and elements for recreation. Finally, and eternally busy dads will appear the opportunity to show their creative talents and create something useful and beautiful on its own landed area or a rival yard.

The automotive tires should be involved in disrepair, especially considering the domestic quality of roads and sharp temperature differences. Instead of sending the old auto stroke into a landfill, it can be slightly transformed and give a new life on the playground, in the garden or garden.

There is no limit to perfection. This statement is well known to everyone and everyone. And any car owner seeks to make perfection from his car. For many factory installation drivers are not enough. They strive to bring something their own. What will distinguish them from the rest. But what to do, if what I want, you can not buy in the store? It suggests only one way out: you can not buy - do it yourself.

Steel recently very popular. They improve the appearance of the machine, change some specifications or bring pleasant additions to the option. Among the entire variety of possible alterations, we suggest to consider several options.

Washing for cars

Let's start, perhaps, from the appearance. When the car is clean, its paint coating glitters and sparkles. It is nice to watch this technique. Immediately the feeling that the owner is watching his car. But it is not always possible to ride a car wash in various circumstances. In such cases, homemade for the car will come to the rescue. You can collect a small washing with your own hands, which can be used at any convenient time.

For the manufacture of washing, the following details will be required:

• canister with two plums;
• 2 m hose (suitable such as to connect a washing machine);
• watering pistol with telescopic barbell;
• fitting;
• spool;
• rubber gasket (outer diameter 2.4 cm, internal - 1.5 cm);
• coupling.

And now I will proceed:

1. In the lid canister make a hole. "Spool" smeared the sealant and insert into the prepared hole of the cover. Let dry.
2. In the second lid we make a small hole. It is necessary for the place of connecting the lid and the coupling process the sealant and also let it dry.
3. From the curved end of the bulk hose, we cut off the nut with the mount. The mount is no longer needed. On the nut we apply a sealant and secure it on the reverse side of the coupling. Sliced \u200b\u200bside hose Connect with quick-screen fitting nut. Next, the main fitting is tightened, which is also connected to the watering gun.
4. From the second side of the hose in the nut insert the rubber gasket. This will protect the system from air penetration. After that, the nut is screwed on the rapid fitting.

On this process of manufacturing homemade for the car, its own hands is completed.

Hairing seats

Homemade can also come in handy. Useful devices and crafts for cars allow you to replace the wear parts, supplement the interior with backlight and make much more. Consider the option how to update the seats.

This will require fabric. You can choose two colors - for the central part of the seats, the back of the back will suit beige leather (it will take about 4 m), and everything else will be black. Black leather is needed about 3.5 m. All the fabric needs to be duplicated (cry) with a layer of foam rubber 0.5 cm. The foam rubber is sick with a phlizelin. Due to this, it will work with it easier.

With removed seats (so more convenient) we remove the covers. Separate parts of them are numbered. In order not to get confused, we carry everything on paper. Also on paper, it is necessary to note the places of fastening of the spokes (they are on the reverse side of the covers). The spokes themselves later get into new covers.

Next, we deal with the trim on the individual details (we dissolve the seams). The patterns of the necessary elements are obtained. We decide on them on the involving side of the tissue (the invalid side up, so that the mirror reflection of the parts does not work) on dense paper (on wallpaper) and supply around the perimeter. At the edges, we leave the allowance of 1 cm, which will go on the seams. Then all patterns are cut and stitched (ranging from the center). From the back of any fabric, we make pockets where the needles are inserted.

By connecting all the details, we get new covers. Such a process is done alternately for all seats. By making such interesting and useful homemakes for the car with your own hands, you can upgrade the salon without contacting the service.

Ceiling update

You can also replace the skin on the ceiling. Homemade for the car in this case it is necessary to start with removal of the ceiling. It may take quite a lot of time. Fastening in each case individually. There is nothing complicated, the main thing is to inspect everything carefully and check all the details to remain integer.

When the ceiling panel is removed, the old fabric is cleaned with it. Preparing the material for the ceiling, you need to remember one important point: from the wrong side, it should have a small layer of foam rubber. The tissue is sick with heat-resistant glue. When the glue dries, the panel can be installed back to the ceiling. Do it in the reverse order.

"Angel Eyes"

Collect electronic useful homemakes for cars with your own hands is quite possible. For example, "Angelic Eyes" will allow update the headlights of any car. For their manufacture, you will need:

• plastic transparent sticks (from blinds);
• resistors (220 ohms);
• battery (9 V);
• lEDs (3.5 V).

The process looks like this:

1. On any metal can, the same in diameter with headlights, screw the ring from plastic sticks using pliers. To do this, it is a little heated.
2. Next join a pair of LEDs and a resistor. Their performance is checked with a battery.
3. Another LED is connected to it.
4. On the frozen ring of plastic sticks make deep cuts.
5. Collect the ring, connect the LEDs, connect.

Conclusion

Homemade for the car with your own hands to gather for everyone. The main thing is to be confident in your abilities. Some information from our article, a bit of their reasoning and thoughts, and everything will work out. And the car from this will only be better. And doubly nice that it is done with their own hands.

Many dream about your own car, but only some find strength, inspiration and desire to hard and painstakingly work on creating their own dream car. It is these desperate self-taught and make the automotive world more interesting, saving it from bored in conveyor production. It is their creations that attract the attention of others sometimes stronger than top models of famous manufacturers.

Today we want to introduce you to the best homemade cars from all over the world. In our rating, really worthy of homemade, which can be sent at least today to mass production, without being afraid of low demand. Most cars that came to the ranking can easily compete with a car of large manufacturers, but unfortunately will forever remain in a single copy, pleaseing the public except for various auto show. However, this makes them special, unique, unique, and their owners make it possible to feel heroes who managed to create a truly worthy car alone. So start.

In our ranking only five homemade. It would be more and more, but we decided to limit ourselves to the cars that have passed all the necessary certification and registered, i.e. All ranking participants are admitted to ride on public roads without any restrictions. This only confirms their quality and uniqueness, and also indicates a real opportunity to compete with serial cars.

The fifth place is given to the SUV " Black Raven"Built in Kazakhstan. This unique car, created for hunting in steppe conditions, has threatening and at the same time futuristic design. "Black Raven" could be safely filmed in fantastic films or even act as an army car, but it is used only by its creator - a modest self-taught engineer from Karaganda.

The appearance of the SUV is truly the original, a bit clumsy, but original and brutal. "Black Raven" is a real male car with a powerful frame chassis, pulp aluminum panels of the body of the body, "poly-eyed" optics and all-terrestrial wheels, ready to venture even in a complex soil. In the battle "Black Raven" rusts due to the powerful V8 motor V8 of American production, working in a bundle with automatic transmission and gearbox from ZIL-157 located on the rear axle. Excellent running quality of the SUV is guaranteed by a long base, a wide range, the central location of the engine and the checkpoint, as well as an independent suspension with Torsion from the BTR. All this allows the car to maintain stability with sharp maneuvers even at a speed of about 100 km / h and easy to overcome the pits and bumps found on the way.

The salon of the unique homemade is designed for two passengers. The equipment of the jeep includes LED piling signals and turn signals, the drive of the front windows, the electrical drive of the hood and the unique chain-driven self-drawer, mounted in the bottom. As for the price, the approximate cost of the "Black Crow" is about 1,500,000 rubles.

Go ahead. On the fourth line, we are settled first in the history of Cambodian car - "". Oddly enough, he was created not a state or private automotive company, but with a simple mechanic Nher Foetack, who decided that in his 52 years it was time to acquire his own car.

Angkor 333 is a very compact double roadster with a very modern stuffing and rather attractive, especially for a poor Asian country, design.

Cambodian homemade got a body with streamlined forms, stylish optics and modern aerodynamic elements. Moreover, Angkor 333 is a hybrid car equipped with a traction electric motor, a 3-speed automatic transmission and a 45-strong gasoline unit designed to recharge the battery. Surprisingly, the self-made roadster is able to accelerate up to 120 km / h and overcome about 100 km on one battery charge. In addition, the equipment of Angkor 333 includes a touchscreen display that performs the role of the instrument panel, and the doors are opened by means of a special magnetic plastic card. There are no such functions for most serial cars, so the development of a talented mechanic is worthy of respect.

The first Angkor 333 was assembled in 2003. In 2006, the Creator presented the second generation of his brainchild, and in 2010 the light saw a finalized third-generation car, which to this day manually gathering small parties to order in the Nhina Faojka garage, providing a redefined old age for retired. Unfortunately, nothing is known about the cost of the route.

At the third place of our rating, a car is located, which is most often called "". Created this impressive SUV Vyacheslav Zolukhin from Krasnokamensk, the Trans-Baikal Territory. At the heart of the homemade - the final chassis of GAZ-66, complemented by converted shock absorbers from the KAMAZ, the front plug-in hubs and the hydraulic power steering from the HINO truck.

MEGA Cruiser Russia is driven by an atmospheric 7.5-liter HINO H07D diesel engine, which in the process of refinement received the KAMAZ system of the air purity. Help the motor 6-speed manual gearbox and distribution from GAZ-66, in which they were replaced with imported all bearings. The drive from the homemade is complete, with the possibility of blocking the bridges in which the main pairs were replaced, which made it possible to achieve the smoothness of the movement on the roads with a solid coating.

The body of MEGA Cruiser Russia is metallic, the team is attached to the frame through 12 depreciable supports. The "residential part" is an upgraded cabin of the ISUZU ELF truck, to which the rejected "rear" of the minivan NOAH is also attached. The front part of the body consists of upgraded wings from GAZ-3307, a hood of its own design and a radiator grid, elminated from several instances of the Land Cruiser Prado lattice. The bumper of the homemade was metallic, their own development, and the wheelbarges of the "transplanted" from the wheels of GAZ-66, which made it possible to establish rubber from the army jeep "Tiger".

If you look into the salon, we will see 6 seats, a lot of free space, the right steering wheel, a pretty cute interior and a convenient driver's seat with an excellent review in all directions.

MEGA Cruiser Russia is equipped with a 150-liter gas tank, a gyroscope, an electric conduction with an effort of 6 tons, an audio system and even a spoiler. According to the author of the self-made, the SUV is able to accelerate up to 120 km / h, its mass is 3,800 kg, and the average fuel consumption is 15 liters on the track and about 18 liters of off-road. Last year, MEGA Cruiser Russia was put up for sale for sale at a price of 3,600,000 rubles.

The second line of our rating homemade is another unique SUV, this is from Ukraine. We are talking about the car. " Buffalo"Also built on the basis of GAZ-66. His author is Alexander Feliciliel from the White Church, Kiev region.

"Bison" received a more modern and more aerodynamic appearance, the originality of which is emphasized, first of all, the front part of the body. Most body panels were borrowed by VW Passat 64, but some elements had to be made independently.

Under the hood of the Ukrainian homemade is a 4.0-liter turbodiesel with a return of 137 hp, borrowed from the Chinese truck Dongfeng DF-40. He also presented "Bison" and a 5-speed manual transmission. In a pair, Chinese units provided a home-made SUV with overclocking to 120 k / h with an average fuel consumption at the level of 15 liters per 100 km. Permanent drive from the "Bizon" rear, with the possibility of connecting the front axle, blocking the differential and the use of reduced transmission.
The car is capable of overcoming a brother depth to 1.2 meters, and also provided with a tire pressure adjustment system with an additional output for household needs: pumping boats, use of pneumomocrat or pneumatic tools, etc.

BIZONE BIZON, planted on 12 supports, is reinforced by numerous rigidity and frame frame, and the roof of the SUV is made of metal with a thickness of 2 mm, which made it possible to arrange the disclosure tent for overnight. One of the features of "Bizona" is a nine-winged layout of the cabin (3 + 4 + 2), with two rear chairs capable of rotating in any direction, can be removed, allowing you to increase the free space of the luggage compartment. In general, the "Bizon" has a comfortable and spacious interior with high-quality finish, comfortable armchairs and front panel with two gloves.

Among the numerous equipment installed on the "Bison", select the presence of a steering amplifier, double brake system amplifier, rear view camera, GPS navigator, electric winches, special head headlights and retractable steps for the rear door. To create "Bizon", Alexander Svicilin spent about 15,000 dollars.

Well, it remains only to call the winner, who, naturally, could only become a sports car, because every motorist dreams of a racing car. He dreamed of a simple self-taught without technical education, Chelyabinet Sergey Vladimirovich Ivantsov, who conceived the construction of his own sports car back in 1983. Car, with the unnecessary name " ISV.", Consisting of the initials of the Creator, was built about 20 years and for this long path managed to survive two prototypes, glued on 1: 1 first from the window putty, and then from plasticine. At the same time, according to the Creator, he did everything "on the eyes", going around without drawings and calculations.

With a plasticine model, Sergey ledielded the gypsum cast of parts of the future body, after which the painstakingly shied them out of fiberglass and epoxy resin. It is worth mentioning separately that the creator of this masterpiece is allergic to epoxy resin, and therefore it was necessary to work in an army gas mask, sometimes spending 6-8 hours in it. What is there to say, perseverance with whom he walked to his dream deserves respect, and the result of his work impresses not only simple zooak, but also experienced specialists of the automotive industry. From the point of view of design, ISV homemade is ready to argue with many now manufactured sports cars, and after all, the final concept of a sports car was about 15 years ago. As Sergey himself admitted, inspiration he scream in Lamborghini Countach, but if you look at, then in the appearance of ISV, you can catch notes and Aston Martin, Maserati, and even Bugatti.

The basis of ISV is a spatial welded frame from squares of a square section, and all the chassis and suspension are borrowed with minor modifications from "Niva". ISV drive, as it should be a good sports car, only rear. As for the motor, the modest engine from the "Classics" received originally, but then he gave way to a 4-cylinder 1.8-liter motor with a capacity of 113 hp. From BMW 318, working in a pair with a 4-speed "automatic". Unfortunately, because of great love for your brain, Sergey never loaded ISV at full capacity, so we never know the true speed of the car. The author of the sports car drives rather neatly and more than 140 km / h is not accelerated.

Look at the interior ISV. Here the classic sports 2-bed layout with the interior is as sharpened as possible for the convenience of the driver. And it is not surprising, because the interior was made manually, repeatedly refined and reworked. Here, as in the exterior, you can see a decent sports car interior design, some details of which also resemble the stylistics of cars of famous manufacturers. ISV is a removable roof, guillotine doors, there is air conditioning, a hydraulicer, a stylish instrument panel from AUDI and an audio system.
ISV price is difficult to speak. The creator himself considers his car priceless and, according to some data, once refused to sell it for 100,000 euros.

That's all, we introduced you to the most interesting and high-quality homemade cars of the last time, admitted to exploitation on public roads. Each of them is unique in its own way, originally and interesting. But together they, of course, left their bright trail in the history of world car industry and presented a sea of \u200b\u200bpositive emotions not only to their creators, but also numerous visitors of various automotive exhibitions and shows. We hope that the number of lovers to create masterpieces in their garage will only grow, and it means that we will have reasons for new ratings.