Tools of wheels Kia Rio. Drying Kia Rio Wheels Not Standard Dissaker

Virtually the entire range of KIA cars is incredibly popular with drivers both our country and around the world. Kia is distinguished by the convenience and reliable technical characteristics. But on cars of this brand, for various reasons, sometimes you have to change the wheels. The article will be told about the peculiarities of the replacement of wheels and breaks on the Kia Rio cars and other machines of the KIA model range.

The Kia Rio car is the most popular and common model among the entire KIA line. The owners "Rio" change the wheels during damage, as wear, and also replace the factory stamped discs to the cast-chosen by them. To do this, you always need to know the exact data on the timing of the wheels of the model and other parameters of its running part.

Tabs Kia Rio.

When the wheels are breaking to "Kia Rio", as well as on any other car, drivers need to accurately calculate the ratio of fastening bolts to the rim diameter. It is possible to measure yourself independently (using a special device) or use the ready-made models.

On a note.

The brazing "Kia Rio" regardless of the year of release of the machine has a single value: 4 per 100, that is, 4 mounting holes and 100 - diameter (in mm) of their location relative to the axis of rotation of the wheel. Models of different annual releases differ only in disk sizes and departure sizes.

Tools on "Kia Rio 1"

Due to the simplicity of management, long-term and comfort, Kia Rio of the first generation became incredibly popular. The demand for the model has decreased with the appearance of the following generations "Rio", but meanwhile, it is also a pedestal on domestic roads.

All generations of Kia Rio have a single breakdown 4 per 100. It is very rarely a breakdown 4 on 98. Refine parameters in the instruction manual. The departure of the disk or em in this modification is from 32 to 40 mm. Hole in diameter no more than 54.1 mm. The diameter of the disk on the first model is 15-16 inches.

Tools on "Kia Rio 2"

The second generation models that have been produced from 2005 and until 2011 have a typical breakdown for KIA.

They differ only in the width and diameter of the disk: the factory has a width of 5.0 to 6.5. The diameter of the disk is a period of 14 to 16 inches.

Tabolovka on "Kia Rio 3"

With the release of the third generation Kia took care of car owners. The third generation models have a special labeling with the indication of all data.

At the modifications of 2013-2014, there is an inscription "6J R15 RSD 4x100 ET48 DIA54.1". The width of the disk is 6 inches, and the radius is 15. The break is 4 to 100, the disk departure is 48, the hole in diameter is 54.1. The breakdown "Kia Rio 3" is almost the same as other generations. The model was made from 2012 to 2016. The size of the disks for the third-generation model Kia Rio is from 14 x 5.5 to 17 x 5.5.

What is the drying wheels on Kia cars

Other representatives of the KIA model range (Ceed, Sorento, Soul and Sortage models) also have its own specificity in the wheels of the wheels. On some models, it often depends on the year of the machine or its generation. Below will be discussed on the most common KIA models on domestic roads.

Kia LED 2008

On a note.

KIA CEED 2008 release is the first batch of serial cars of this model. Immediately after reaching the conveyor to the market, they were loved by drivers all over the world. The breakdowns "Kiya LED" differ depending on the year of their release.

In the first Kia Ceed breakdown - 5 × 114.3. The diameter of the hole in all modifications is 67.1 mm. Departures in the factory unit - 47 mm, are also allowed 51 and 56.

The model was produced with two diameters of wheels:

• R15 with tires 195/65, departure disk 47 mm, disk size - 15x5.5.
• R16 with tires 205/55, departure disk 51 mm, size - 16x6.5.

Drivers often change discs on this model instead of full-time factory, setting interesting alloy wheels with a suitable size and breakdown.

When replacing wheel drives, it is necessary to know the exact data of the "Kia LED" breakdown, the year of its release and the data in the data in the machine's technical documents.

"Kia Sportage 3"

The compact urban crossover from Kia in the third generation was produced in the period from 2010 to 2015, this modification "Sportage" is still loved by many drivers. Replacing wheel elements After purchase for removing stamped discs from the factory configuration for purchased cast or forged.

When replacing disks and tires by car "Kia Sportage 3", it is recommended to adhere to the full-scale sizes of the manufacturer:

Attention!

The deviation from the factory norms can lead to changes in the characteristics of the car - dynamics, stability, fuel consumption, etc.

KIA SPORTEGE 3 PCD 5 × 114.3 car breaks 5 × 114.3. Provides 5 mounting bolts and the diameter of the circle on which the holes are located under them, 114.3 mm. On the car of this brand, discs with a diameter R16, R17 and R18 are installed.

The following wheels are installed on CAI Sportage 3 cars:

Kia Cerato

The breakdown "Kia Cerato" is considered depending on the year of the vehicle.

This mid-class car from Kia is produced since 2004 to this day, reaching the fourth generation. This sedan is also incredibly popular among KIA, having survived the appearance of Ceed created by him for replacement.

Each generations of the Kia Cerato car, depending on which year the car was released, his type of breakdown:

• Kia Cerato 1 (LD) (2003-2008) has a break (PCD) 4 × 114.3,departure (ET) - 43-43 mm, the diameter of the central hole (DIA) - 67.1 mm, attached to the hub with nuts with M12 x 1.5;
• Kia Cerato 2 (TD) (2008-2013) has a break (PCD) 5 × 114.3, with departure (ET) - 41-50 mm, the diameter of the central hole (DIA) - 67.1 mm, attached to the hub with nuts with M12 x 1.5 ;
• Kia Cerato 3 (YD) (2013-2018) has a break (PCD) 5 × 114.3, with departure (ET) - 46-50 mm, the diameter of the central hole (DIA) - 67.1 mm, attached to the hub with nuts with M12 x 1.5 ;
• KIA Cerato 4 (BD) (2018-2019) also has characteristics with a breakdown (PCD) 5 × 114.3, with departure (ET) - 41-50 mm, the diameter of the central hole (DIA) - 67.1 mm, attached to the hub with thread nuts M12 x 1.5.

On a note.

Also, depending on the year of release within the modification and dimensions of the discs, the breakdown may differ.

Rubber size for Kia Sorento

The Kia Sorento model is another medium-sized crossover from KIA.

The rubber on it changes when changing seasons, as tires wear, switch to another tire model. Depending on the region of operation of the car, weather and natural conditions, it is worth choosing the type of tires exploited - all-season, summer, winter.

Winter tires are also selected depending on natural and weather conditions, roads for which you have to ride. For the track, ice and snow porridge on the roads, winter studded tires are perfect, for the conditions of the city, frictional "velcro" will be more convenient.

How to choose the right size

For the correct selection of tires for Kia Sorrento, it is necessary to correctly pick up the size of the auto strokes.

In the factory configuration, the manufacturer sets the size of 235/65 R17. In addition, on Sorrento, it is possible to set the rubber of larger diameter: R18 and R19. It is possible only in the summer season.

Friction and studded winter tires on Kia Sorento are better to use according to the manufacturer's recommendations. Considering that the size of the tires recommended by the manufacturer (R 17) is quite common, the desired size of the tires is always possible. This size is usually present in the outlets of tire dealers.

Attention!

When choosing the size of the tire, you must know exactly the parameters suitable for this car.

All Kia Sorento models have 5 × 139.7 breaks.

Another important point when choosing the right size of rubber is the purchase of original tires. It is explained by the fact that the replicas sold in the market and fakes often do not have a declared quality producer, while the sizes may also not come up. It is important to buy autoresuin from an official dealer.

Dzabolovka "Kia Soul"

Kia Soul.

Kia Soul All years of release has a breakdown of 5 × 114.3. On the wheels of different years of models are installed:

• For cars 2008-2014 release

• Modifications	Disc parameters			Shin profile
  hub	basic	replacement options	base	replacement options
  1.6 CVVT; 2.0 CVVT; 1.6 CRDI; 1.6i; 1.6 CRDI; 1.6 GDI	67,1	6JX15 5/114.3 ET 44	6.5JX16 5/114.3 ET 51 7JX18 5/114.3 ET 54	195/65 R15	205/55 R16 225/45 R18.
  2.0i	67,1	6.5JX16 5/114.3 ET 51	7JX18 5/114.3 ET 54	205/55 R16	225/45 R18.

• For cars release 2014-2019

• Modifications	Disc parameters			Shin profile
  hub	basic	replacement options	base	replacement options
  1.6 CRDI; 1.6 GDI; 1.6 MPI; 2.0 GDI	67,1	6.5JX16 5/114.3 ET 47	6.5JX17 5/114.3 ET 51 7.5JX18 5/114.3 ET 55	205/60 R16	215/55 R17 235/45 R18
  EV	67,1	6.5JX16 5/114.3 ET 47	Without options	205/60 R16	Without options

In other words, various wheels were used in different generations. This information can be clarified in the service book or technical documents of the car. When changing wheels, disks and rubber, it is necessary to refer to these numbers.

The hubs of wheels of different models of KIA in different years of release differ in the size of the breakdown. Change rubber, wheels and wheels on KIA must be based on this data.

If non-standard discs are installed on the car - this can lead to friction and increased wear. Therefore, it is worth sticking to the factory standards. Therefore, the correct selection of wheels must be an important element.

Tabolovka wheels

At Kia Rio in different generations used different wheels. Typically, this information is specified in the service book, or technical documents of the car. Also, on each vehicle there is a plate, where it is written, which discs and tires are suitable.

Characteristics

Consider breaking the wheels for Kia Rio according to the manufacturer's manufacturer's factory by the year of release and generation:

Wheel disk.

Kia Rio disk parameters:

PCD 4 × 100 diameter from 13 to 15, width from 5J to 6j, departure from 34 to 48. Similar parameters on Honda Fit III (GE) 1.2 2018. Tire dimension from 13 to 15, wide from 175 to 195 and profile from 60 Up to 70. Minimum rubber size: 185/65R13, maximum: 185/65R15.

Tabolovka wheels.

Output

As can be seen, there are quite a lot of tires and disks on Rio, and therefore the car enthusiast can choose what to taste. You can install, both simple stamped discs and cast.

Many Kia Sorento owners are wondering - what kind of disks and wheels from their car? Usually, such a question sounds when you need to find out the parameters of the factory disks, and it is also possible to spend tuning suspension.

Purpose of breaks of wheels

Drying wheels - the distance between the hub bolts and the number of bolted connections on which the disk is attached. The paraly is designed to land the wheels to the hub. If the breakdown is not chosen correctly, the wheel will not be able to wear onto the fastener bolts, and respectively and fasten.

Vehicle.

Factory rabid

In the entire history of production, Kia Sorento was going in different configurations. This directly affected the selection of wheels, and accordingly, on a break. Depending on the configuration and year of the car, the relevant standards of the manufacturer have been installed on Ford Fusion.

So, consider the table of breaking the wheels on Ford Fusion, taking into account the configuration and year of release:

Characteristics of wheels.

Standard breakdowns of 5 × 139.7, while the diameter of the wheels is 16 inches. The width of the drives used from 7.0j to 8.0j. Quite similar parameters can be found in Ford Cuga and Honda CR-V.

Heracteristics wheels.

Not standard rabid

Non-standard breakdown Wheels Kia Sorento applies when tuning car suspension. To change the interbolic space will have to go for victims and change all four hubs on the vehicle. This will certainly fly into a penny owner.

Output

The size and breakdown of disks on Ford Fusion has the form of PCD 5 × 139.7, while the diameter of the wheel is 16 inches. Width of discs that are used from 7.0J to 8.0j. To install non-standard and non-regular discs, for example, for tuning will have to change all four hubs.

Kia is a Korean brand specializing in the automotive industry. The company produces a wide range of vehicles, starting with compact hatchbacks, solid sedans and ending with minibuses and full buses intended for urban traffic. One of the popular models of cars produced under this brand is Kia Rio.

This car first appeared on the European market in 2000. To date, 3 generations of this car have been released. The first is in the buildings wagon and sedan. After 3 years, Kia Rio comes off from the conveyor in an updated form. The headlights underwent changes. In addition, the machine gets improved soundproofing and front brakes.

In 2005, the second generation of this car comes out. In 2010, the brand begins cooperation with a famous German designer. Almost all changes in the car: the grill of the radiator, bumpers, steering wheel, there are several new colors, the length of the car is increased, etc. Starting in 2010, Kia Rio is beginning to collect in Kaliningrad.

The third generation of the car was released in March 2011 on platforms 2 Hyundai models - Solaris and I20. In Russia, while planning to release a special model Kia Ria. It will be presented with potential buyers in August 2011. The basic car for this novelty was the Chinese car K2 machine, which was fully adapted to use in Russian conditions. Models of this machine, released in 2013 and 2014, received a new body.

Today Kia Rio is one of the most popular cars in Russia, which have an acceptable price and excellent quality. Therefore, many motorists choose this particular car for themselves. The machine is the most practical and selling in its class. Due to the available price, the level of sales of this car model is at the highest level. Kia Rio owners often spend tuning of their car, paying special attention to replacing regular discs, tires.

What is a breakdown?

It would seem that in this process there is nothing complicated: it is enough to remove the regular discs and replace new ones. But in fact, not everything is so simple. The breakdown of the discs and their replacement is a very long and time-consuming process, especially for those who have never been engaged in these.

Discs are fixed to the wheel hub using bolts or needles (a huge role is played by certain parameters - the size and weight of the disk). So, for alloy products, spokes are used, thanks to which the wheel is perfectly fixed. Bolt discs are also characterized by the number of holes. On the labeling, 05/12 is written. This inscription suggests that there are 05 holes located on the circle, the size of which is 112 mm.

For different car stamps, these parameters will be different. With their absence, the breakdown can be carried out on their own.

Important! Disk breaking, having an odd number of fasteners, is calculated according to a specific formula. You will need to measure the distance between bolt holes. Next, you should multiply the resulting value on the coefficient, which for 03 of the mounts is 1.55, and for 05 - 1,701.

How to make discs breaking?

So, where to start the procedure for breaking disks for the car Kia Rio? This can be done in several consecutive stages:

1. Determine all the significant technical parameters of the wheels. The choice of discs - the lesson is responsible. Here you need to pay attention not just on the external attractiveness of the wheels, but also on other characteristics, in particular, to break. But to start, you need to determine which sizes and marking of the disks you need.

But in principle, no confusion occurred, since all discs have standard marking corresponding to their parameters. All discs have the same standards. All necessary indicators for Kia Rio of various modifications can be found on the network.

So, for example, Machine Kia Rio 2013 and 2014 release has the following labeling - 6J R15 RSD 4x100 ET48 DIA54.1. This combination provides the owner of Kia Rio that the width of the wheels of the wheels is 6 inches, and the diameter is 15 inches.

The following combination of letters and numbers - RSD 4x100 - European marking, which indicates the number of holes and the diameter of the circles. These parameters are a breakdown, i.e. Rio has 4 bolts that are in a diameter of 100 mm.

By installing a new disk, you should pay special attention to this parameter as a disk departure. This parameter is no less important than breaking the wheels. If the new disk has a negative value, then with different maneuvers (sharp turns) of the wheels will perform outwards. If this value is too big, then the disk will not be installed. Therefore, the wheel departure is one of the most important indicators.

It is indicated by the departure of the disk for Kia Rio next marking - ET48. In the coincidence of the surfaces of the disc surface with its center, such an indicator as departure is 0. According to European standards, Kia Rio has a positive departure at a distance of 48 mm.

1. Determine the breakdown. You can do this on your own one of the proposed methods:

• Going to buy new discs, just take with you the old models that need to be changed. Check out the size of the disk.
• Measure the distance between the mounts using a special measuring instrument. This is an extreme option for those who have old disks.

How to determine the full-time sizes of tires and disks?

Determine the regular sizes of discs and tires on Kia Rio, for example, the 3rd generation will not be required to have special skills or skills. By purchasing tires for this machine, it is important to know such parameters like a breakdown and departure. This car is produced since 2011, it is equipped with two radius disks - R15 and R16. It all depends on the configuration of the machine. Some put low-profile tires with a diameter R17.

For cars of 2010, tires with rim diameter - R14, R15, R16 are suitable.

Important! The sizes of tires for the car of this model are: for R15 - 185/65, and for R16 - 195/55. If you decide to purchase abnormal tires, then deviations in the diameter of the wheels should be minimal, and the breakdown in any case should be suitable.

If you need any help when determining the breakdown, it is better to immediately entrust this business to specialists. They will help you determine the diameter, tire size, wheel departure and other parameters of interest for cars 2002-2014 release.

How to choose discs and what better to buy? Reply in this video:

Drivers who decided to replace the wheels must accurately calculate the ratio of fastening bolts to the rim diameter. You can measure the ratio on your own (using a special instrument) or use the ready-made data on a specific model.

Indicators that affect the correct wheel installation:

• The number of incisors (LZ);
• Distance between holes;
• The diameter of the arc on which they are located (PCD);
• The diameter of the central window (DIA);
• Departure.

What is disks break?

The breakdown is determined by the ratio of bolts, with which the discs are attached to the full diameter of the circle. According to the standard, it is customary to consider the norm 5 to 112 ratio. Accordingly, the first figure is an indicator of the bolts, and the second - wheels where the bolts are attached. For each individual car it is customary to calculate the breakdown separately, taking into account the number of bolts, diameters and other factors.

To perform the calculations you need to know the size of the wheels. Discs can be classified according to the following criteria:

• The rim width (ensures reliability of support).
• Departure (or ET).

Dissaker at Kia Rio 1

The first model of KIA has become very popular due to the simplicity of management, long-term, elevated comfort. Kia Rio is less popular than models 2 and 3 generations, but still on Russian roads sometimes meet.

To transform Kia Rio, you can replace outdated wheels for a new kit or follow a non-traditional path and get tires more in diameter and other design. The car will look much more spectacular and brighter. When choosing a new "shoe" for KIA, pay attention to such indicators:

• Rim size;
• Breaking;
• Departure.

The models of Kia Rio I have one common feature regardless of the year of release - a breakdown 4 per 100.

Discs 4 to 98 for Kia Rio 1 are far less frequently. To accurately determine the diameter, you should look into the instruction manual, which is attached to the machine. The minimum inconsistency can lead to the emergence of technical problems, as well as to an increase in fuel consumption.

Models released from 2000 to 2005, a circle of at least 15-16. For some options, drivers acquire 17 diameter, but necessarily in combination with a low-profile tire.

The hole in diameter should not exceed 54.1 mm.

Tools at Kia Rio 2

The breakdown of models of 2 generations, the release of which was carried out from 2005 to 2011 - typical for KIA.

The width of the factory disk is between 5.0 to 6.5.

Dia does not change - 54.1 mm.

Tools at Kia Rio 3

The generation 3 model discs are endowed with special labeling - to make it easier to find the right option. For example, on modifications 2013 - 2014. The following inscription "6J R15 RSD 4X100 ET48 DIA54.1" is found. The user immediately understands that the width of the disk is 6 inches, and the radius 15. The second block indicates the European standard, which determines the number of bolts and the size of the circumference itself.

Caia Rio 3 is almost the same as the Kia models of other generations. Year of production 2012 - 2016.

Disk size - from 14 x 5.5 to 17 x 5.5.

The ratio of fasteners to the circumference is the same - 4 per 100.

It ranging from 40 to 50.

Bolts size - 12 x 1.5.

Tabolovka at Kia Rio 4

4 generation models are the most recently. Year of release - 2017- 2018.

Tire marking Next:

• 6JX15 PCD 4x100 ET48 DIA54.1
• 6JX16 PCD 4x100 ET52 DIA54.1

Let's try to decipher marking:

• Tire circumference - 15-16.
• The diameter of the central opening, as well as the "fellow" - 54.1 mm.
• Carving or fasteners - 12 x 1.5.
• Standard departure from 48 to 52.
• "The drill" did not change - 4 per 100.

The breakdown at Kia Rio should not be very different from the one that the car received under the factory conditions. It is important to remember that there should be 4 bolts on a circle of 100 mm. Another proportion is invalid.

Conclusion

The KIA RIO models of all generations are the same breaks, as well as the diameter of the center opening. The dimensions of the disks and departure are distinguished. The number of holes and bolts also depends on generation.