Technical task for buying a car. Technical task for the purchase of a car Purpose. Technical task for cars purchases

Requirements for the quality of the car supplied
When performing a technical task, you must consider the following

Similar material:

• Territorial body of the Federal State Statistics Service for Kamchatsky, 619.89KB.
• Glare using the data administration data, the territorial body of the federal, 720.3kb.
• Winter studded Cooper Weather-Master WSC, 253.22KB.
• P / p Name of the state authority in the jurisdiction or structure of which is located, 56.65KB.
• The name of the state authority, in the jurisdiction or structure of which is 107.48kb.
• Technical task for the performance of work "Implementation of activities aimed at creating, 403kb.
• Program II International Scientific and Practical Conference, 298.15KB.
• Abstract on the topic: "Maintenance of a passenger car", 566.64KB.
• 1. Included 1 point 1 of the statute of the word by decree of the President of the Russian Federation from 09., 20.95Kb.
• Technical task Lot # 1 for the purchase of food for the needs of MDOU "Tale", 816.19kb.

»Approve"
virio of the head of Kamchatstat
__________________ G.F. Courtyard

TECHNICAL TASK

to purchase a Toyota Land Cruiser Prado 4WD car (or equivalent) for the needs of the territorial body of the Federal State Statistics Service for the Kamchatka Territory
The supplied car must comply with the following requirements:

1. The car should be new, the year of release not earlier than 2010
2. Location of a driver's seat - on the left;
3. Full warranty and service in Petreopavlovsk-Kamchatsky, warranty period - at least 3 years or 100,000 km of run;
4. Engine petrol, amount of at least 3950 cubic meters. cm.;
5. Gearbox automatic, 5-speed;
6. Number of doors - 5, number of places - 7;
7. Drive - permanent four-wheel drive;
8. Forced blocking of the central and rear inter-track differentials;
9. Central differential of increased friction;
10. Adaptive suspension;
11. Intelligent car access system and start the engine by pressing the button.

Requirements for the safety of the vehicle supplied (security and management systems):

1. Body stabilization system, off-road drive system (CROWL CONTROL), anti-lock brake system (ABS), emergency braking system, anti-slip system, electronic braking force distribution system, cruise control system, course stability system, lifting and lifting system system descent on the slope;
2. The presence of front and side airbags for the driver and passenger, the knee airbag for the driver, security curtains;
3. The presence of the front and rear parking sensors;
4. The presence of survey cameras around the perimeter - at least 4;
5. Alarm with a volume sensor, immobilizer.

Requirements for the functional characteristics of the supplied car:

1. Full electrobacts, including power windows and mirrors, seats and steering column adjustment (flight and tilt), electric heating of the front wiper and rear-view mirrors, electric heating seats;
2. Salon rear view mirror with electrochromic coating;
3. Memory of the position of the driver's seat, mirrors and steering column;
4. The presence of an audio video system with the ability to read CD, DVD disks, reproduction of Audio-CD, MP3, WMA, DVD-Video, FM radio formats, the Russian frequency range, the number of speakers is at least 14, multifunctional color touchscreen display;
5. Communication system Bluetooth;
6. Leather seat and doors;
7. Decoration of the cabin and steering wheel with inserts "under the tree";
8. Separate 3-zone climate control;
9. The third series of seats with electric folding;
10. The presence of a wiper and rear window washer, purifiers and front headlight washers;
11. Folded side mirrors with heated and electric drive;
12. The presence of side footsteps, mudguards, additional stop signal, fog headlights;
13. Alloy wheels;
14. Full-size spare wheel under the bottom;
15. Body color - dark gray "Metallic".
16. Rubber floor mats with sides in the cabin and trunk;
17. Windproof lining on the glasses of side doors;
18. Hood deflector.

Additional equipment:
Additional set of winter wheels on alloy discs (4 pieces).
Requirements for the quality of the car supplied:
The quality of the car must comply with the current state standards, technical requirements, passport data, biomedical, sanitary and environmental standards established in the Russian Federation.
When performing a technical task, you must consider the following:

1. All costs for purchasing, delivery, customs clearance,
2. The car must be imported to Russia under the full fee,
3. Availability of documents confirming the certification of the car.

Place and delivery time of the car:
The delivery of the car is carried out at the location of the Customer at the address: 683017, Kamchatka Territory, Petropavlovsk-Kamchatsky, ul. Kronotskaya, d. 14. Delivery time - within 7 calendar days from the date of the conclusion of a state contract for the purchase of a passenger car.
Deputy Head A.V. Boyarsky

About purchasing car

No, specifying a specific car model, including with a reservation about the equivalent, is undesirable, as it entails the narrowing of the circle of potential procurement participants and the restriction of competition.

With antitrust practices for similar cases you can find in justification.

The rationale for this position is given below in the materials of the system of lawyer and the "GOSCAZ Systems".

Purchase of a car indicating a trademark

"Problem:

Is the right customer in the technical task of the auction documentation for the supply of a car indicate its trademark (mark) with the words "or equivalent"? *

According to paragraph 1 of Part 1 of Art. 33 of the Federal Law of April 5, 2013 No. 44-FZ "On the contract system in the sphere of procurement of goods, works, services for state and municipal needs" (hereinafter - Law No. 44-FZ) Customer in the description of the procurement facility documentation Must be guided, including the following rule:

the description of the procurement object should be objective. In the description of the procurement object, functional, technical and qualitative characteristics, operational characteristics of the procurement object (if necessary) are indicated. The description of the procurement object should not include the requirements or directions regarding trademarks, signs of service, branded names, patents, useful models, industrial designs, the name of the origin of the goods or the name of the manufacturer, as well as the requirements for goods, information, work, services, provided Such requirements entail the restriction of the number of participants in procurement, except in cases, if there is no other method, providing a more accurate and clear description of the characteristics of the procurement object.

Procurement documentation may contain an indication of trademarks in case of work, the provision of services is supposed to use the goods whose supplies are not subject to contract. In this prerequisite, the inclusion in the description of the procurement facility of the words "or equivalent", except in cases of incompatibility of goods on which other trademarks are placed, and the need to ensure the interaction of such goods with goods used by the customer, as well as cases of purchases of spare parts and consumables To machines and equipment used by the Customer, in accordance with the technical documentation on the specified machines and equipment.

According to Part 2 of Art. 33 of Law No. 44-FZ Procurement Documentation in accordance with the requirements specified in Part 1 of Art. 33Zakon No. 44-FZ, should contain indicators to determine the compliance of the purchased goods, work, services established by the customer. This indicates the maximum and (or) minimum values \u200b\u200bof such indicators, as well as values \u200b\u200bof indicators that cannot be changed.

Thus, it is prohibited when describing the procurement object, specify trademarks, except if:

• there is no other way that provides a more accurate and clear description of the characteristics of the procurement object;
• when performing work, the provision of services is supposed to use the goods whose supplies are not subject to contract;
• we are talking about the purchase of goods that will interact with the goods used by the Customer;
• if spare parts and consumables are purchased for machines and equipment used by the Customer, in accordance with the technical documentation on the specified machines and equipment.

In this case, the purchase of a car of a certain brand, for example, "Renault Duster" (with the words "or equivalent") is not a case when there is no other method that provides a more accurate and clear description of the characteristics of the procurement object and does not apply to other cases of exceptions, When it is possible to specify a trademark. Purchase of a particular car of a specific manufacturer is not objective and reasonable, since the customer can use any car similar "class" and the indication of the car's trademark will be a requirement limiting the number of procurement participants.

When purchasing a car, the customer should set the maximum and (or) minimum values \u200b\u200bof the procurement object indicators, as well as values \u200b\u200bof indicators that cannot be changed. The purchase object should be described in such a way that cars and other brands (another manufacturer) can come under the description.

In our opinion, the requirements for the trademark (brand) of the car (with the words "or equivalent") can be appealed in the antimonopoly authority due to the fact that only a certain product of a certain manufacturer can actually be proposed, especially if Application »Equivalence parameters actually can also be offered to supply only a car of a certain brand.

So, for example, in the decision of the Dagestan fault of Russia of September 8, 2014 No. 478A-2014: "In violation of paragraph 1 of Part 1 of Art. 33 of Law No. 44-ФЗ Customer Included in the auction documentation Indication on the trademark, namely: "Supply of the Toyota Camry car (domestic assembly) or equivalent."

The commission also found that under the parameters of the Toyota Camry car, indicated in the auction documentation, other car brands are not suitable. The most similar to the parameters with "Toyota Camry" cars "Nissan Teana" and "Honda Accord" are also not suitable for the requirements of the customer according to the parameters of the "trunk volume" and "fuel consumption", respectively.

The customer is not represented by the arguments that indicate the possibility of supplying the goods equivalent to the Toyota Camry brand, due to the applicant's argument on the establishment of the requirements for the goods to the product, which entail the restriction of the number of procurement participants should be recognized as reasonable.

Thus, by setting the requirements for the product, which entails the restriction of the number of procurement participants and pointing out the trademark of the goods supplied in the auction documentation, the customer violated the requirements of paragraph 1 of Part 1 of Art. 34Zakone No. 44-FZ ".

In the decision of Ryazan Ufas Russia of August 4, 2014 in case No. 265/2014-З / 2, it is also noted: "The Commission on the results of the analysis of the documentation" Technical Operation "containing a description of the procurement object (when conducting an electronic auction for the supply of a car of a car" Toyota Camry "or equivalent) It has been established that the range of product characteristics specified by the Customer, correspond only to one car with the Toyota Camry trademark. In the complaint, the applicant provides information on the technical characteristics of the vehicle cars of the same class, namely: Mazda 6, Nissan Teana, Honda Accord that are not suitable for certain parameters under the requirements established by the customer. The customer's representative did not provide evidence of the availability of another car with respect to the parameters established in the technical task of the auction documentation.

Thus, the customer in the electronic auction documentation includes the requirements indicating a trademark, a service sign, the company name, which entails the restriction of the number of procurement participants, namely: the Toyota Camry brand car, which is a violation of paragraph 1 of Part 1 of Art. 33 of Law No. 44-FZ ".

Thus, according to the results of consideration by the complaint with the antimonopoly authority, in our opinion, there is a risk of recognizing the Customer who violated paragraph 1 of Part 1 of Art. 33 of Law No. 44-FZ, including if the applicant proves that only a certain car is suitable for the customer's requirements (only this car can be offered to delivery) and the customer will not be able to prove the opposite.

We note that in addition to the risk of cancellation of such purchases (on the prescription of the antimonopoly authority), there is a risk of attracting the Customer to administrative responsibility of claim 4.1. Art. 7.30 Code of Administrative Code.

Recall that in accordance with the indicated Code of Administrative Code of the Russian Federation, the inclusion in the description of the procurement object of the requirements and guidelines for trademarks, maintenance signs, branded names, patents, useful models, industrial designs, the name of the origin of the product or the name of the manufacturer, the requirements for goods, information , work, services, provided that such requirements entail a limit on the number of procurement participants, with the exception of cases provided for by the legislation of the Russian Federation on the contract system in the field of procurement, or the inclusion of one lot, the object of purchase of goods, works, services, technologically and functionally Not related to each other, entails the imposition of an administrative fine on officials in the amount of 1% of the initial (maximum) contract price, but not less than 10 thousand rubles. and no more than 50 thousand rubles.

In this regard, we recommend customers to keep in mind the specified risks and make a decision to describe the procurement facility, guided by Art. 33 of the Law No. 44-FZ (without specifying the trademark (brand) of the car, including, with the words "or equivalent") *.

Changes in a collective agreement: how to derive from Art. 44 TK RF, the procedure for making changes to ...

Anniversity attachment to the contract is a document that clarifies or in more detail discloses the content of contractual conditions. ...

for the purchase of a passenger car

1. Purpose:Transportation of passengers

2. Technical requirements:
Year of issue:no earlier than 2013

Exploitation:New (not used in operation)

Body type: SUV

Number of doors: at least 5.

Color:White

Power, hp:at least249.

Box Type:Automatic 8 steps

Type of fuel:Petrol

3. Safety requirements:The security requirements must be compliance with transportation of passengers. Rear parking radar.
4. Warranty period:not less than 2 years without a mileage limit.

How to purchase a car by 44-FZ, what restrictions to consider what to write in technical lady, how to justify the purchase, read in the article. Also consider purchasing spare parts.

Purchase of a car for 44-FZ in 2019

As in all procedures, during the purchase of cars in 44-ФЗ, there are limitations: specify the brand and model of the machine in the description of the procurement object. This is permitted only with the phrase "or equivalent". Please note that the following goods must be purchased by electronic auction according to the list from the order of the Russian government of 21.03.2016 No. 471-p:

• tools for motor vehicles, trailers and semi-trailers - OKPD2 code 29;
• tools Transport and equipment, OTPD2 30 (except CODES 30.1, 30.3, 30.92.2).

As for the rationale for the procurement, to make it in accordance with the Decree of the Government of the Russian Federation of 05.06.2015 No. 555. You can specify a state or regional program, and if the purchase falls under non-prosecable costs, such a wording can be included: "Functions and powers".

Restrictions

When purchasing a car by 44-FZ, consider the rationing requirements. These are the limit performance indicators and prices of purchased goods. For cars, they are indicated in the Decree of the Government of the Russian Federation of 02.09.2015 No. 927. The power of the passenger car should be no more than 200 horsepower. The maximum cost of the vehicle depends on the category of the customer:

• head or head of the federal state body - 2.5 million rubles;
• head of the Federal State Authority (in the Federal Agency), the Deputy Federal State Emergency Department (in the Federal Service or in the Federal Agency) - 2 million rubles;
• the head (or his deputy) of the structural division of the Federal State Authority - 1.5 million rubles.

National regime

Purchases of cars of 44-FZ fall under the actions of the prohibition within the framework of the national regime. The rules are established in the Decree of the Government of the Russian Federation of July 14, 2014 No. 656. The prohibition extends to the purchase of cars of foreign origin, as well as on:

• bulldozers on tracked tractors;
• tractors;
• self-propelled graders;
• excavators;
• vehicles with a spark ignition engine, with a working capacity of cylinders no more than 1500;
• vehicles with spark ignition engine, with a working capacity of cylinders more than 1500;
• transport with a piston internal combustion engine with compression ignition (diesel engine or halfdide);
• buses;
• trolley buses;
• trucks.

The essence of the restrictions are that when purchasing a car or lease services, with the subsequent purchase of a vehicle, the Customer is obliged to reject applications with products from foreign countries, with the exception of the EAEU countries. Confirm the country of origin can be a certificate issued by the authorized body of the EAEU member state.

the laval rule during the purchase of vehicles is to give preference to Russian goods and comply with the rules of rationing. In the documentation, establish a ban on the admission of foreign goods of mechanical engineering, and in terms of the schedule, show that apply the national mode. In technical launch, do not specify the brand of the car, otherwise limit the competition. See how to act step by step when you buy vehicles.

An example of the correct TK on the car

When drawing up a description of the procurement object, take into account the requirements of Art. 33 of the law 44-FZ. In particular, enable images or product photos or product photos, use the indicators that are provided for by publicly available technologies. There is no approved form of case. Often, customers include a table in the documentation, which indicates the name of the car, characteristics, quantity and price.

Consider a real example of describing the procurement object. The customer purchased the Datsun on-Do Access MT car or equivalent, the NMCC was 452 thousand rubles, the notice number in EIS 0134300065319000028. The following characteristics were indicated in the technical task:

• color - gray;
• engine volume, l. - not less than 1.6 l., Power, hp - not less than 87 hp;
• gearbox - mechanical transmission;
• ABS with a brake effort distribution system;
• BAS (electronic braking amplifier);
• EBD (electronic brake force distribution system);
• driver airbag;
• three-point inertial seat belts;
• heated front seats;
• electric power steering;
• steering adjustment in height;
• folding rear seats;
• front and rear mudguards;
• year of release - no earlier than 2019.

Purchase of spare parts for cars by 44-ФЗ

When purchasing automotive spare parts for 44-ФЗ, customers indicate the brand of the machine, the state number and the body number. This is permissible because the technical documentation for the machine is established a ban on the use of other spare parts. Accordingly, the participants offer only suitable spare parts.

Consider how to make a description of the procurement object, on the example. The customer purchased spare parts for several cars - the notice number in EIS 0138100005319000022. In the case of the case, he pointed out the model and listed which parts are necessary, without specific characteristics. For example, to UAZ Patriot State. No. B921W Body 316300F1048635 required:

• drive belt generator 1 pc.;
• set of pivot with bearings 1 pc.;
• front gear shank gland 1 pc.

Nested files

• Technical task for the supply of passenger car.docx
• Technical task for the supply of special cars.docx
• Technical task for the supply of a school bus.docx

for the purchase of a car
The object of purchase is the delivery of the car (hereinafter - the product).

The amount of goods to be supplied to be shipped is not subject to, except in cases provided for by the current legislation of the Russian Federation.

The customer must be delivered goods in accordance with Appendix No. 1
to the technical assignment.

Requirements for product quality - in accordance with the regulatory documents of the producer country.

The goods should be made at the licensed enterprise - the manufacturer.

Product Delivery Place: Salon or Warehouse Supplier within St. Petersburg. Delivery to Salon or Warehouse Supplier within St. Petersburg
and the pre-sale preparation of the car is carried out by the supplier at the expense of its own funds.

The supplier is obliged to transfer the goods to the customer next period: 3 working days
from the moment of receiving the advance payment by the supplier in the amount of 100% of the contract price.

At the time of the transfer to the Customer, the goods should belong to the Seller on property rights, be new, no earlier than 2017 release, not to be laid
or arrested, not to be an experienced and exhibition model, not the subject of claims of third parties.

Simultaneously with the transfer of goods, the supplier must transfer the customer a set of documents that includes:

a) the passport of the vehicle;

b) the act of receiving a car;

c) commodity invoice;

e) certificate of conformity on the car decorated in accordance
with the legislation of the Russian Federation;

(e) Technical documentation of the manufacturer (service book, instruction manual, technical and warranty service runtime).

Appendix No. 1.

Description of the procurement object

Characteristics: