Tuning Chevrolet Aveo: from the family car to the racing car. Tuning Chevrolet Aveo T250: Wonderful Regeneration Salon Interior Tuning Aveo T250

T250 is the first generation of the famous and popular model in the post-Soviet model. It is this modification that is restyling. The release began in 2008 and continued until 2011. Then has already changed generations.

Change specifications

Before moving to the styling, you need to work under the hood. The fact is that the factory settings of the Chevrolet AVEO engine of this generation do not always correspond to our expectations. Therefore, in numerous tuning salons, firmware for the ECU for this model has long been developed. What indicators can be improved when programming? First of all, the power and torque that will affect the increase in the maximum speed and improve overclocking speakers.

In addition, after such a chip tuning you can save a little more on the fuel. Consumption on average will decrease by 1-2 liters per 100 kilometers. There are special firmware that are designed specifically to increase the cost-effectiveness of the power unit. But they negatively affect the dynamics. Is it possible to complete the internal tuning on this note? Not really. The fact is that factory components are designed for factory engine settings. Accordingly, if you change the characteristics of the power unit, prepare for the fact that you will have to change some components.

This applies primarily by the exhaust system. Power growth can only be felt by replacing the standard layout on the so-called "spider" by adding a straight-flow silencer. Installing shock absorbers with shortened springs will make the car more "squat". This will improve handling and add rapidly silhouette.

Do not forget about the brake system. Leaving regular discs, you risk reduce the level of security in aggressive driving. The best option is perforated larger diameter discs. Moreover, the rear brakes can also be made by disk. And of course, for the completeness of sensations, it is possible to replace the camshaft. It is almost impossible to spend this with your own hands. At the very least, the firmware is better to entrust professionals in order to subsequently not pay more for your mistakes.

Styling Chevrolet Aveo T250

After you have completed the inner tuning of the car, it's time to appeal to its design. As we have noted above, he is morally outdated. With the help of styling you can noticeably revive the exterior. Where to begin? If you are planning with your own hands, learn the offer of body parts intended for styling. There is not so little on the market and there is always a sentence.

The hood with air intakes, wings with habia and pita, all kinds of body kites and spoilers - all this will allow you to make significant changes in the appearance of the car and it will play with new paints. You can change the color of the car to create a composition, cover with special layers like diploma and much more. There are no limits for fantasy. The main thing is the budget.

Install new discs and paint them into body color. Low profile tires will emphasize the sports knob of the updated Chevrolet Aveo. Try stylish optics with xenon headlights or LEDs.

At the bottom of the machine, install neon stripes. Head lighting and lights can be toned, including body color.

Changes in the interior

After completing the external styling, you can go to the salon. Working with the interior also requires departure. You can, of course, manage the budget option and acquire new covers on the armchairs and mats. But such a light styling is unlikely to please you for a long time. More radical measures - buying new chairs or a hauling. Taking into account the fact that the car refers to the budget segment, spent on dear skin does not make sense. It is enough leatherette.

The same applies to inserts to other parts of the cabin. It is advisable to make them in the overall range of interior. Additionally, add chrome elements, for example, on the gearbox handle. Insertions "under the tree" are unlikely to be appropriate, although it all depends on your specific concept. Lighting creates an atmosphere of comfort and heat. Therefore, this issue is usually paying much attention to tuning. Do not make it too bright or poisonous.

With a more detailed tuning of Chevrolet Aveo T250, some car owners decide to change the dashboard. To do this, set new sensor scales or remove some of them to the center panel and the front rack next to the driver. As a final chord, set a new multimedia system, as well as speakers. The trunk put a subwoofer and amplifier. But the spaces for baggage in this case will not remain. By the way, remember that in this case you may have to refine noise insulation.

Tuning Chevrolet Aveo T250 will allow the car to transform and change it to be unrecognizable. Much depends, of course, from your budget. You can save on a series of operation with your own hands. But if the means allow you to order an individual project, which, no doubt, pays attention to all road users.

Video Tuning Chevrolet Aveo T250

Relief of stock cars can be divided into 2 main types: useful tuning and various styling. In our supermarket, we offer to buy accessories for Chevrolet Aveo 2007-2011, which will make cars even more modern. Each motorist will be pleasantly not so much to stand out among others, how to install useful to use supplements. Choose tuning from major Russian and foreign companies, and you will always rejoice at a unique and unforgettable type of your car.

There is an impressive variety of accessories for tuning Chevrolet Aveo 2008-2010, and often many are asked: why start? The owner store can advise first of all to acquire something, without which the use of modern vehicles cannot be so pleasant. On the floor of the cabin of any car, it is very necessary to purchase car audits, they will help prevent dampness and moisture penetration. In a modern car, not only there is a danger of corrosion appearance, but also really damage to the electricians, and this is an even more threatening perspective.

The second point of useful changes - buying deflectors for windows and hood. Such tuning will protect Chevrolet Aveo 2009-2010 from drafts and stones. A large number of deflectors of individual shapes and types are represented in the owner store. For example, deflectors with shiny moldings: these accessories look great.

Installation of body kit in Moscow

The priority direction of Tuning Chevrolet Aveo T250, which implements our online store, is the sale of steel bonding and aluminum thresholds. Comfortable steps can help when landing and make the exploitation of SUVs as pleasant as possible. Without footrest, children and disabled are difficult to keep clothes clean, it is more convenient to clean the roof from snow or install bicycle fasteners.

The practical and stylish body kit makes it possible to protect the plastic and the door of the car from contact with neighbors in the flow and from other troubles. Many small accidents will pass by by the help of reliable construction and thick metal. Similar tuning for Aveo T250 is vital in the off-road or density of a major city with a huge traffic.

We also have a huge variety of accessories for tuning salon and outdoor car. Here you can order various lining on the headlights, and spoilers. Each similar accessory will make the appearance of your car more respectable and attractive. All tuning you have the opportunity to deliver with your own hands or in our technical center on the day of purchase. We deliver goods for tuning in Moscow by courier or in any city of Russia with transport companies: it is fast enough, convenient and reliably.

Tuning "Chevrolet Aveo" is the modernization of the factory technical characteristics of the car by installing improved parts. You can carry out such work with your own hands or you can contact the tuning studio. Masters in the studio will definitely make everything professionally and quickly. There are several groups of tuning, namely: outdoor, salon, and motor.

Outdoor tuning

The external tuning of Chevrolet Aveo is a replacement of a number of details that have the best performance indicators, aerodynamics. They look beautiful, possessing modern and non-standard designer qualities. The price of modernized spare parts is always higher than standard factory for 20-50%. This is due to the fact that their manufacture has more materials. In addition, in the execution of individual tuning, everyone has to do in one instance.

Consider what is included in the outer tuning. So, the materials will be needed:

• Budget. Typically purchased or manufactured by a set. It includes front and rear bumpers, and threshold lining. They can be produced from plastic, fiberglass, aluminum alloy, automotive plasticine or mounting foam.
• Antiques. Often perform it from plastic. But the most efficient material is considered carbon with aluminum fasteners.
• Hood. It makes special slits and air intakes are installed. They provide absorption of the oncoming air flow for additional engine cooling.
• Toning of glasses. It is an integral attribute of a car tuning.
• Mirrors. Almost in all cases they are purchased part, which is selected through the fasteners of the landing elements.
• Painting. It can be made almost on any car service. But the drawing of the picture on the body should be entrusted to professionals that can do it. Therefore, the drivers usually collect information about the tuning studio that know how to make the Chevrolet Aveo individual and recognizable car.

All these manipulations make experienced people. They know what kind of exterior tuning to apply to improve the characteristics of the car.

Tuning Salon

For Chevrolet Aveo T250, the tuning of the salon is a whole art when the usual inner world of the car changes beyond recognition. The modification process includes many manipulations:

• At the very beginning there is a complete dismantling of the inside of the car. Everything is removed: from seats and trimming racks to carpeting and dashboard.
• When a naked body remains, you need to handle the ADV-17 spray all open cavities. This will protect them from corrosion.
• Now you can smoke noise and vibration insulation. It is done gradually: gently puts the layer behind the layer.
• The seats and the instrument panel are dragged with skin or other automotive cloth. This can be done on top of the old material or instead. The instrument panel is dragged over plastic. The same technology is used when tuning racks, ceiling. Seats can be replaced by sports type chairs.
• An acoustic system is installed on the rear shelf, which has seats under the column.
• The trunk is offended by carpet. And a subwoofer is installed in the side niche.

Engine modernization

Chevrolet Aveo chip tuning is to improve the power characteristics of the motor for better dynamics and acceleration. The result can be achieved in several ways: replace the parts of the power unit and flash the computer. For Chevrolet Aveo T250, the engine tuning by replacing spare parts is made on special car services. In this case, the piston part is changing with rods for lightweight options (API), as well as valve (API), camshaft (API), Timing system (FINWHEEL), throttle valve (DWR), spark plug (Brisk), (TESLA), system Motor cooling (ROW, SKIN) and clutch (SNR).

The exhaust system, although it is part of the motor, but when tuning it is isolated in a separate category. JP provides several options for exhaust gases, which become standard planting attachments. The control unit firmware is setting up electronic injection and ignition system. It allows you to add fuel a little earlier, while the car is gaining speed faster. One disadvantage of such modernization becomes increased gasoline consumption by 15-20%.

Suspension, steering and chassis

Tuning "Chevrolet Aveo" In terms of suspension and chassis, it does not differ from the modernization of other brands. There is a regular replacement of standard parts on improved versions. So, consider which spare parts are subject to installation:

• Racks shock absorbers.
• Front and rear suspension springs.
• Stabilizer and its racks.
• Steering tips.
• Discs and tires.
• and hoses.
• and hubs in some cases.

All this will help improve controllability by car, as well as its grip with an expensive. It is worth noting that the improvement of the technical qualities of the chassis and is also aimed at improving the level of security.

Sedan and hatchback tuning difference

In these suits, Chevrolet Aveo tuning will be somewhat different. Sedan and hatchback, as you know, have different salon and suspension. So, the spoiler in the second case is installed on the back door, and not on the lid of the trunk, as in the first version. In addition, it is located above the rear glass to increase the flow of the car.

Tuning "Chevrolet Aveo" (hatchback) is not limited to other anti-cycle. For example, he has rear and springs by 2 mm higher than that of the sedan. This body is possible to install the rear stabilizer of the double effort, which makes it better to hold the car on the road surface.

We work yourself!

Tuning "Chevrolet Aveo" is carried out by their own hands on the same technology as in a professional studio. The difference is that experts use better materials for the manufacture of spare parts. And the rest of the production technology does not differ from the one that you spend yourself. It is worth noting that many car owners make only partial upgrades. It mainly includes tuning salon and body. Often the engine and suspension remain intact.

Tuning Chevrolet Aveo is becoming increasingly popular every year. One of the main reasons for such a demand for the modernization of the car lies in the chassis of the hatchback. According to the reviews of motorists in various forums, it is the suspension that is considered the most vulnerable element of the machine. Moreover, starting from the 2008 models, this part of the car becomes only worse. What is the reason for such a trend, how to modify the chassis of Chevrolet Aveo and make a spectacular machine - try to figure out together.

1 Variants Tuning Pendants Aveo

The first thing that rushes into the eye during the operation of Chevrolet Aveo is screens and knocks in the chassis of the car. Many of us are accustomed to "throw" everything on the quality of Russian roads, but not in this case. The reason for strange sounds from the machine shock absorbers lies completely in the other - the poor quality of some elements of the front of the suspension. And if the models came out from the conveyor in 2004-2008, begin to creak after 40 thousand km, then the cars released after 2012 do it after the first tens of thousands.

What is interesting, even car sellers cannot give a specific answer to the question of strange sounds when driving. Fortunately, Russian specialists can solve many problems, including this. The most popular option for the finalization of the chassis of Aveo can confidently consider the increase in its hardness. What gives this method of upgrading? First, all third-party sounds disappear. Secondly, the handling of the car becomes much better. Thirdly, the car moves more smoothly. In a word, this is the perfect version of the improvement in Chevrolet released in 2012-2013.

The first, where to start - this is a search and purchase of suitable shock absorbers and springs. No matter how trite, but to help the owner of Chevrolet 2012. can come from AVEO, but released from 2004 to 2008. If you wish to buy new elements for your hatchback, you can use a set of sports details from Bosch.. After purchase, you need to prepare tools. We will need:

• jack;
• stoppers under the wheels;
• a set of keys;
• screwdriver kit;
• balloon key.

Since all models of Chevrolet Aveo front-wheel drive, then for tuning it will be enough to replace shock absorbers only in this part of the car suspension. First you need to raise the car with the help of a jack. Plus it will be needed to install the stoppers under the wheels that will not allow the machine to fly down. After that, proceed directly to tuning. Initially, we unscrew 2 bolts holding the depreciation rack on the swivel fist. Next, disconnect the steering tip using the mount or removable key for this. The next step will be the disconnection of the brake hose and unscrewing nuts that fastening the upper part of the depreciation pillow.

Then carefully remove the depreciation rack. We are tightened by the spring until it releases the upper landing "cup". We unscrew the shock absorber nut, dismantle the spring and bump. Before us appeared shock absorbers that need to be replaced. Remove them and mount new elements instead. After that, we collect the design and proceed to work on the second wheel. As we see, improving the suspension of Chevrolet 2012-2013 is not so difficult . The main thing is to choose really high-quality shock absorbers and perform work on the specified algorithm. As a result, you get rid of annoying creaks and significantly improve the handling of your car.

2 Improved Chevrolet Salon

It is worth noting that the unreliable Aveo suspension with more than compensates for a comfortable salon of this model. And, as it is not difficult to guess, the later the car has gone from the conveyor, the better its cabin. Therefore, as a rule, the release of the cabin applies to cars released in 2004-2008. And the weakest link in the cabin cabin is a regular trim. All modern are suitable for its replacement.

However, the most popular can be called Alcantar. Although this material is not cheap, it is quite deservedly considered one of the most reliable and easy-to-use. After buying a product, we need to prepare:

• acute knife;
• scissors;
• special glue for working with a cloth;
• a set of screwdrivers for dismantling seats.

As an adhesive thing, it is worth searching Scotch-Weld 77 Or another glue with the same properties. First you need to remove and endure all the seats from the Chevrolet salon. After that, you can start a drawing of the inner surface of the doors, the ceiling and the arch of the body. To do this, dismantle the staffing of Aveo. Then we apply a new material to the factory portory parts and cut it on the current loop. It is very important to leave 2-3 cm of material on the edges of the reserve. After that, we proceed to replace.

As soon as you replaced the lining in the cabin, we continue to work with the seats. The algorithm of work is the same - first remove the full-time trim, cutting Alcantar and drag it the seats. In the end, it remains to install the chairs back to the salon.

3 styling body body - on the way to perfection

After our work, the work remains one thing - perform an external tuning of Chevrolet Aveo. Here options, as they say, even debt. As a car released in 2004 and models that have fallen to the market in 2013 give their owners a lot of ways to upgrade the body. The first thing that often rushes into the eyes is the lack of a rear anti-car. Significantly change the car, and in a set with bubbles and new bumpers will make it a real sports car.

When buying parts, it is best to look at the ready set of elements from a well-known company. Non bad sets from the famous company WRC.. Another good method to transform the car is the replacement of a regular grid of the radiator. In addition to the ability to change the appearance of the Chevrolet, the new grille performs a protective function, without giving the garbage to get into the windscreen space.

To replace the lattice, we need scissors, pliers and detergent for cleaning the mesh. As a new protective lattice, a finely suitable chain chain from any household goods store will be well. First, remove the regular bumper in the front of the Aveo. We dismantle the factory lattice and apply a chain to it. After that, cut the latter, leaving 2 cm on each side. Next, thoroughly clean the landing space for the grille, after which we install a new grid. At the end, screw it with regular fasteners or screws and install the front bumper.