How to determine the volume of oil in the engine

Each car owner must take care of its vehicle. And absolutely no matter, new this car or old. Correct care will extend the service life of the aggregate. In addition to cleaning the cabin, the volume of oil in the engine should be regularly monitored.

How much is required

To determine whether to pay attention to the country where the car was produced. These data can say a lot about the vehicle.

For example, for domestic cars to lubricate all the details of high quality, it will take 4 liters of oil. For foreign cars, another amount of fluid is necessary. At the same time, the average working filling volume of the engine ranges from 1.8 to 2.4 liters. If the motor motor is more powerful, then lubricants will need more.

How to independently determine the volume of oil in the engine

If the vehicle of domestic production, then to determine the volume of oil is required:

• Pour 3.5 liters in the car.
• Determine the level of fluid with the help of the probe. If oil is not enough, you can add another 200-250 grams.
• With the help of the probe, it should check the level of lubricant.

How to check in a foreign car

The volume of oil in the engine foreign cars is determined in the same way as from the domestic vehicle. For this applies probe. At the same time there are maximum and minimum marks. Do not forget that for each car, depending on the manufacturer, requires a certain filling minimum.

As a rule, for 1.8-2.4 liter engines, about 4.3 liters of oil is necessary. At the same time, it is not necessary to buy a large amount of lubricating fluid at once. There will be enough 4 liters. It should be noted that the exhaust oil does not completely merge. It remains on the motor housing, and on its details.

Another way

How to find out what is the volume of oil in the engine? Of course, it is possible to measure it with the help of the probe, and can be determined by the size of the cylinders. You can measure testimony not only in liters, but also in cubic centimeters. The operating volume of the engine is the sum of the working volumes of cylinders. These readings indicate not only the power of the motor, but also on the fuel consumption.

It is worth noting that the working volume of cylinders is indicated in the technical passport of the vehicle. You can also find out the necessary numbers by studying the blocks of cylinders. They can be considered from the pit. They are indicated from behind large characters. However, if the car is used, bought from the hands, the real indicators may not correspond to the designated. This is especially true if the vehicle visited an accident.

In addition to digits on the cylinder blocks, it is possible to determine the volume of oil in the engine using a VIN code that can be seen on the door from the driver side at the bottom. It is possible to decrypt its value using a special table. This is the most reliable way.