Tricycle do it yourself. Tricycle from the Urals do it yourself. How to make from the Urals tricycle 3 wheeled motorcycle do it yourself

Few people know, but make the tricycle with their own hands from Ija in the usual garage with a sufficiently small budget. A small trike will have a comfortable landing, dynamics, good handling, and the ease of the frame will allow to accelerate a rather large speed.

The model itself can be implemented hard bike style, with trim from leather, steel chrome inserts, or have a more sporty look, with streamlined forms and lines of the case. The drawings of the tricycle from Iza may have accents for long trips, or to an active ride for complex rough terrain, copy models of famous brands with amendment. Much depends on the budget and the time you are ready to invest in your hobby.

Some motorists make tricycle from Ija with their own hands in order to have a reliable and convenient improvement assistant. The enhanced frame, the powerful rear axle will allow you to carry decent goods, and the reliable Iza engine is easy to maintain.

Frame

Make a tricycle Izh with your own hands will be easier if you have the experience of welding work, you understand the design of motorcycles or cars. The frame should be completely made with zero, have a predetermined form and design. Usually the calculation is in such a way as to eliminate breakage, places with vulnerable structures so that Tryk can drive hundreds of kilometers without maintenance.

Strengthening is achieved by way welding corners and additional pipesSo that the plug does not vibrate. The basis of the transmission can be taken from the motoblock, combines. If you want to get the tricycle IZh Planet of the traction type - it is better to use asterisks in a 2: 1 ratio, i.e. 50 and 25 teeth, respectively.

Fork

The length of the fork is determined by your project. If you want to make a long front fork, such a trike is suitable for a smooth road and a long ride. A more aggressive driving style will require less length. Tricycle from Iza, photos of various mods of which can be found on amateur forums, may even have a trunk located above the front wheel. Of course, on the traffic police, there are no competitors to quad bikes, however, for trips to the country, a garden or fishing, nested works will pay off with more than.

Engine

Your own hands, Izh tricycle is made on the basis of the model "Planet 3". It uses the native crankshaft, the generator, the ignition coil in 6 volts. The feature of the type of body design is the transfer of a power unit to the back, which shifts the balance when driving. Moreover, such a scheme determines the high characteristics of passability, controllability, and, consequently, the speed.

During the installation of the engine and the creation of the frame, it is necessary to provide convenient access to places requiring frequent maintenance. Many masters make quick-consuming frames of the frame to be able to further adjust their three-wheeled iron horse. If you are interested in how to make a tricycle from Iza, and how much time and money will need - try to get a drawing of the design, but a detailed scheme and step-by-step plan for installing aggregates. And better - see detailed instructions and video review!

Probably, each at least once in life saw huge three-wheeled motorcycles on which the expanses of roads are furious no less huge bearders in leather vests and iron helmets. And more than once watched photos from Motoshow or exhibitions, on which steel horses bang under the flags of their motorcycle clubs. These vehicles are called tricycles or trains due to the presence of three wheels instead of two.

Such motorcycles are specifically designed for long and comfortable trips, have affecting capacity and power. The only drawback of these models is rarely found on sale. And if so, there are already (especially if it is the brand brand children), then their cost will be very high. What if you want to have such a bike, but there is no big money and the acquisition opportunities? The answer is one - create it yourself.

How to make tricycle

To create a homemade tray, we will use two other vehicles - the CZP-968 car and the heavy motorcycle "Ural". As a result, it should be very powerful and quite reliable tricycle, where you can conquer hundreds of kilometers.

Drawings of a common design

Our tricycle will be a single design from ZAZ-968 and "Urals". But in order to assemble this, it is necessary to have a drawing, thanks to which you can clearly see the location of all parts and components.

1, 2 - front wheel and wing; 3 - front wheel suspension system; 4, 5 - headlights and bracket headlights; 6 - speedometer; 7 - gas tank; 8, 9 - lever and gearbox; 10 - battery; 11 - seat back; 12 - rear lights; 13 - air filter; 14 - engine; 15 - cooler; 16 - Oil-air radiator; 17 - silencers; 18 - rear wheel; 19 - elastic coupling; 20 - brake traction; 21 - brake pedal; 22 - beep; 23 - rear wing soil; 24 - shock absorbers; 25 - frame for fixing the radiator and silencer; 26, 27 - rear wing and its fastening console; 28 - front console; 29 - wing bracket; 30 - rear wheel suspension levers; 31, 32 - Gas and brake handles, respectively; 33 - Ignition Castle; 34, 35 - clutch pedal and clutch thrust; 36 - Speed \u200b\u200bSwitch; 37 - steering wheel.

Design features of the tricycle:

• to enhance all joints, special brazers are used;
• the upper beam is a support for the rear shock absorbers, so glasses are welded to it, which, in their design, the same as automotive;
• the frames needed to be welded to the keys and slopes on the central beam, the framework for the passenger and at the same time the role of support for chippers suspension was carried out;
• the lower crossing is attached to the frame with the help of brackets and pods, playing the role of the base for pedal nodes;
• the troop on the fastening of the transverse frame is necessary for the support of the entire gear shift mechanism.

The features of the layout of the tricycle differs significantly from the standard motorcycle. The main difference is that the power unit is located behind and the balance is shifted back, which gives an extra reason for adrenaline - with a sharp acceleration, the motorcycle becomes at all.

The engine, like the gearbox, was removed from the VEZ-968 car and no significant improvements over it was carried out. In the overall design of the back of the trades, except that silencers, oil radiator from the car and the air filter. Everything else is entirely and completely left the same as on ZAZ-968. The engine mount remains the same, the gear lever is on the left (in view of the fact that the right hand of the driver is located on the throttle control lever). The gearbox mechanism is connected to the box through the usual hinge, which are installed on domestic cars.

The fork of the front suspension works on the same principle as on the Urals. The lever circuit is used, and the front wheel axis is between the transverse levers. In general, it is necessary to change a bit - you only need to lengthen the borrowed front fork "Urals".

Assembly with your own hands

Having a scheme and knowing individual nuances of the process itself begin a step-by-step process of assembling homemade tricycle.

In the end, it turns out a trike, technical characteristics and the appearance of which is not inferior to the tricycles that have ever seen earlier.

Video Roller About the tricycle IZH

In this video, you can see how ultimately looks like a homemade trike based on the Izh Planet 5 motorcycle.

Below are several trains with an interesting and memorable design.

The article is drawn up by the forum materials, link to the source

Some information on Caracata, although from photos and so everything is clear, but Musch can Kamuto will be interested. Motor from the Motorcycle IL Planet, Left Hinge with a disalliveness fan Szd. The regular electrical equipment is replaced with the rhodrode, which does not need a battery and it is much more reliable than instead of the camshals, the hroll sensor.

>

Differiencyl UAZ and two long UAZ semi-axles. The semi-axes are shortened as Caracat Caracat would have turned out very wide. The native hubs are cut and pressed from Moskvich, as the wheels are made on the basis of lighter Muscovic disks.

>

Motorcycle Wheel disk is powered and based on it is made disc for white-79. In general, two sets of wheels were made, one based on white - 79 for dirt, one based on the chambers for the swamp. Upon completion, it turned out unexpected: chamber wheels were somewhat heavier. This year, the summer was dry and on factory wheels were chased without any problems, the chamber was not "put on".

>

>

The frame is strengthened with jams, at the bottom of the engine attachment and in the attachment area of \u200b\u200bthe fork. The bronze bushing is inserted into the mounting for strength, as well as without such loads, as in the swamp in Izh-her, it breaks the bearings in this place. The body is made of leaf luminous and luming corner on rivets:

>

The price of the Cracata was very decent, but this is because much had to redo the work in the course of the work as the experience of the manufacture of such devices was not. In the course, various technical problems were solved. In the design, only new details and materials were mainly used, therefore the price was high. The device in terms of operation is being finalized, departure summer and floor of autumn for mud swamps, etc. So far without any problems. Below photos of the manufacture of this all-terrain vehicle.

>

>

>

>

>

The passability of the Caracata is excellent, the sword is rusted as it should, the engine is a trap and even with a cargo go confidently on full off-road swamp. Very maneuverable and well-managed of course not as an ordinary motorcycle, but it is quite normal and not hard. In the north of the Omsk region and in Tyumen, it is very rare to see a four-wheeled cutter, three-wheeled time tested by time, and easier they are in design than four-wheeled, less iron and nodes, it means more reliable.

And this Caracat, so to speak prototype, and the predecessor of this Caracata.

>

Checking the buoyancy of the Caracata, as it can be seen on the water, keeps and not bad. On the river flow, therefore, tied with a rope, we usually have such devices when crossing the river are tied to a motor boat and so recharge.

>

Photo rear drive from below

>

>

63000 rubles took the construction and refinement of this carcation, such a price was out of the fact that everything that we needed for its construction was converted a new one, even the smallest thing, the work of Tokary and the pont. The engine has moved replacing the piston, bought a left cover with a welding from a disabled and another.

Not everyone can find a vehicle vehicle for his own taste - especially if he wants something unusual. Therefore, it is worth thinking about what you have to do everything yourself is the only way out, but he is the best if you understand the mechanics and know a lot about assembling. But what can you collect yourself like this to surprise everyone around? An excellent example of this can serve tricycle - they will not buy them in stores, there are few of them where they produce massively, so you can create yourself your own unique vehicle, which will be envied all around. However, there is a serious question - how to make the tricycle with your own hands? To do this, you will need a wide variety of spare parts that you can get, while using the basis and details of some available motorcycles, such as the Ural or Izh. It is possible that you have one of these samples in the garage. Their without problems can be remade under the tricycle or use to collect their own unique model from scratch. Accordingly, you will need to think over in advance, make a drawing or download it from the Internet, because the network definitely has enough enthusiasts like you. And then you need to prepare for continuous and not the easiest job that several tips can be made easier. You can read them further.

Tricycle layout

The first thing you need to think if you are going to make the tricycle with your own hands, is his layout. The fact is that the power unit, which is usually located at motorcycles directly on the axis, thereby improving the balance and reliability of the vehicle on the road, can no longer be there. Accordingly, you need to carry it over the axis, between the two rear wheels. Naturally, it affects the stability and controllability of the tricycle - and not in the best way. But if you are an experienced driver, then you can quickly adapt. Moreover, it opens up some interesting prospects - for example, the ability to make your vehicle on rats without any problems. It looks extremely spectacular and, unlike motorcycle, in this case you do not risk anything - this is an absolutely safe action (of course, if you do not strongly draw the car on yourself, but on a motorcycle such a trick in any case is much more complicated). Accordingly, you can impress everyone around not only the appearance of your vehicle, but also its spectacular capabilities. This is enough enough to convince yourself to make the tricycle with your own hands.

Force aggregate

Naturally, when you think about making a tricycle with your own hands, you will need to choose the appropriate engine. In this case, you do not need to take a power unit from another motorcycle - the engine is also suitable. The main thing is that it is normally placed between the rear wheels. So you can increase the performance of your vehicle. In some cases, you do not even have to make any changes and improvements, in others - replace the radiator or some other item. It is also recommended to establish other silencers, and increase their number by setting one by each of the cylinders. Naturally, there are other options - it all depends on what kind of power unit you decide to choose. For example, if you do a tricycle from the "Ural" with your own hands, the engine is better to replace completely.

Gear box

When you make a tricycle from the Urals with your own hands, you must take into account where the gearbox will be located. You already understand that the engine itself will be outside the axis, behind the seat, between the two rear wheels. At the same time, take care that it is most securely attached at least in three places - especially if you plan to perform various tricks, as described above. As for the gearboxes, it is better to install it from the left side of the steering wheel, since the right hand you will be busy most of the time. It is unlikely that if you take the engine and the box from the car, you will be able to make a fairly comfortable design to switch the transfer without driving away from driving. Also do not forget about what you need to take care of connecting the box to the engine, which is a bit more complicated, considering that now it is located a little further from the box than should be in the original. But if you are trying to understand how to make a tricycle with your own hands, you always need to be prepared for such surprises and difficulties.

Suspension

It does not matter, you are doing the tricycle with your own hands from "Iza" or any other motorcycle. In any case, you will have to remove the front wheel suspension. After all, the distribution of efforts in the tricycle is very different from the one that is observed in an ordinary motorcycle. To do this, you will need two pairs of consoles, as well as two powerful springs - if possible, try to get the helicopter or aircraft, but also the springs from passenger cars, if necessary, can also be used. The consoles must be connected to the levers through which the axis of your front wheel will pass. Naturally, this is not the only way - there are a large number of ways to make the tricycle with your own hands. Drawings are available on the net (one of them - both in our article), but this method is one of the most effective.

Principle of operation of the suspension

If you do not make tricycle from the scooter with your own hands and expect a powerful and impressive model, and not for a children's tricycle with a motor, then you need to seriously think about the action of the suspension of your front wheel. Why do helicopter or airborne reasons need? The fact is that the movement of the wheel on the vertical axis will occur with much more effort than the motorcycle, so you need to install tough and durable springs - at least, into the lower part of the suspension, which compensates for the movement along the vertical axis. To compensate for the movement along the horizontal axis, you can use softer springs - for example, from the "IZH" motorcycle. Tricycle with your own hands to collect, as you can see, it is quite difficult, but if you follow all instructions, you will have a clear drawing and all the necessary materials, we must cope.

Battery

The battery for your tricycle must be installed under the driver's seat - for this, a special frame is created, which is located over the engine. Thus, the most important thing in your vehicle is located in one place. You should also think about making a passenger seat for the driver. It will not only allow more people to go at the same time - you can attach the boxes to it, which will completely close the engine and the battery, making your tricycle finished.

Installation of additional devices

Before completing the work, you need to think about installing all the necessary elements, such as rear-view mirrors and so on. All this needs to be thought out so that these devices can be easily and convenient to use in any situation.

Painting

Well, the final stage, naturally, is painting, because you worked with separate details from different vehicles. Most likely that they either do not have paints as such, or painted in different colors. Accordingly, you need to take care that your tricycle in the end looks perfect. After painting, you will need to cover all painted places with a transparent varnish, and then polish, and metal parts if you want to chromium, so that the tricycle looks like a new one.

Everyone knows that for a good support you need only three points, but for some reason three-wheeled transport is not so common on our roads, like four-wheeled cars. Although the first tricycles appeared in the 18th century. It was on such steam machines that the guns and heavy weapons for the army were proposed.

Homemade tricycle - transport of many generations.

At one time, the tricycles were much more common, but today we are not often visible on the roads tricycle. Photos of Thanks are the second name of tricycles can be seen on bikers or car enthusiast sites. It is worth noting that the tricycle can be both a type of motorcycle and a type of car, so if you have conceived to make a tricycle with your own hands, immediately decide which kind of tricycle you imagine.

Of course, before building the Trike with your own hands, you must study in detail the principle of operation of such a transport and have drawings. Drawings can be made independently, if there is a necessary education and good knowledge of all nodes. But if there are no such skills, but I really want to create a homemade tray, you can find ready-made drawings of homemade traits, which designed other craftsmen.

By the way, see the video of the tricycles, which made their hands made garage couliabs on the alteration sites or Youtouube, where video tests of garage inventions were laid.

Tracks do it yourself: where to start

Dongs for the tricycle, may be any vehicles, but most often collect tricycle from the Urals or tricycle from Iza.

In this embodiment, it is necessary to redo the least, because the base of motorcycles is the most suitable for trains.

Many make trains with their own hands "Urals" and "ZAZ" collecting these two vehicles together.

The first stage of work on Trike is the creation of a frame and rear axle. The bridge to the frame can be attached to the thrust, on the principle of car VAZ or to put on the springs, as is done in Muscovites. The frame naturally will have to extend, but it is easy to do with pipes and profiles. If you have conceived to make homemade trike from "Urals" with your own hands, almost everything will remain native - fork, brake discs, hydraulics, wing, etc. By the way, such tricycles of homemakes look good in a chopper-style with elongated forks and low fit. On the Internet you can see the photo of tricyclic