How to make an autode on wheels yourself: photo of finished work. House on wheels from the trailer, the old bus or Gazelle: how to make it yourself? Homemade Autodoma from minibuses

If you decide to make a car with your own hands, you will need some basic knowledge, tools, a lot of patience and even more free time. And, of course, a reliable vehicle to create a camper.

This article present some photos of the house on wheels built by your own hands on the basis of Volkswagen car. Most of the Soviets can also be used during the construction of motorways on the basis of other cars.

Before you start it very important to read the next item!

IMPORTANT! Before the beginning of the creation of a camper with their own hands, it is necessary to legalize the implementation of such a procedure. In this case, you can prevent various difficulties of a legal nature. The rules differ depending on the country, so we cannot publish uniform recommendations on this occasion.

The first steps

Building a house on wheels with their own hands consists of the following steps:

• Outdoor work
• Internal work
• Work on water supply
• Gas and electricity
• Furniture
• Other

If the van is operated only by two people, there will be a lot of space. If you plan to travel 3 or more people, you need to consider the number of places. Remember that places should be equipped with appropriate safety belts.

How many places to sleep do you need? One option is to arrange a bunk bed for children. If you have a reserve of place under the roof, you can make a "drop-down" bed.

At this stage, you must have a clear plan for further action. Of course, you can improvise, but much easier to have a thoughtful plan on paper.

Outdoor work

The first thing to be done in the preparation of the basic vehicle is a thorough cleaning of the inner part of the car.

At this stage, it is also necessary to consider the form of the body as a whole. It is time to deal with body damage, rust. Local or complete car painting will help.

As a rule, vans have no windows, so you can think about their installation. They are needed to provide the influx of fresh air and entering sunlight inside the autodoma. The windows are of different shapes and sizes, the choice depends on your preferences and body features.

During the construction of the house on wheels, there will have several holes in the car body. We are talking about the holes for ventilation, the output of the gas (in the case of leakage), exhaust gases of the heater, the filthy gorlovin for water, etc. Some of them can be made later, but it is much easier to solve the issue now, if you know exactly where they will.

Do not forget to apply primer in all places where naked metal appears to prevent corrosion.

Build your own autod right!

Internal work

Most likely, the wagon will be partition behind the front seats. Some partitions are attached to screws, others weld to the body. Solve the problem will help "Bulgarian".

Remember the need to use protective products. Sparks can leave unpleasant stains on the glasses, from which it is impossible to get rid of.

Begins the most interesting. The insulating layer is very important because it will protect your camper from external noise and temperature. There are many materials that can be used. The choice depends only on you.

In this case, was used material Armaflex. It should be cut into pieces and glue. The main point is the protection against moisture. If the insulating material does not protect the moisture from entering, it is not worth using it.

It is necessary to prepare insulating material, lightweight and moisture-proof, as well as a soft and flexible carpet.

For side covers, a thicker phaneer should be used, as Furniture will be installed on them.

Use glue or sealant with a large temperature range for the insulation and carpet coating on the side walls. Because the van will be exposed to both the minus temperature and the hot summer sun. Also will affect the work of heating. In the case of the use of poor-quality glue, it is necessary to redo it again after a while.

Where to begin? Start sowing an autode, ranging from the roof and ending with the floor. First, mount the insulation and facing layers on the ceiling, then go to the side panels.

Use wooden planks on the floor to equip sufficient space for isolation. Reiki are attached to the floor with the help of the appropriate sealant. Then the layer of insulation is stacked, after which it should be covered with plywood. Plywood is fastened with sealant or screws.

Remember the water supply, as well as the need for laying electrical cables and gas tubes. Wires and hoses can be paved through isolation or under plywood lids, if you already know where all the devices will be installed.

Work on water supply

The house on the wheels should have the supply of cold running water. For this, two canisters with water are installed under the sink. The submersible pump provides water to the crane.

If you need warm water, extra sink or shower, the system will be more complex. You can install large water tanks in another place, for example, under the van. Support hoses to combine the entire system.

When you make an autode yourself, only fantasy limits you.

Do not forget about wastewater. You can set the appropriate tank under the car or pave the hose through the floor to merge water into the portable tank or the usual bucket.

Remember that the water used will terribly smell like in the summer and freezes in winter. Therefore, it is necessary to get rid of it as soon as possible, so the bucket can become an ideal solution.

What about the toilet? You can set one of the comfortable portable toilets.

Gas and electricity

IMPORTANT! Gas supply hoses and electrical wiring must be installed only by qualified specialists! In case of incorrect installation, they may be of serious danger. Make an autode on your own, but do not expose other people at risk.

Propane In Cepers can be used for cooking, heating, as well as refrigerator connections. You can do without it, using electric stove and refrigerator, as well as a stand-alone Webasto heater.

The gas cylinder must be stored in a separate location with holes at the bottom. Why is the hole be undeporting? Because propane is heavier than air, so it will always go down.

You can even make a valve to connect the gas stove outside the car to cook food outside the van in the future.

Again, build a camper right for your own security!

Electricity Need to launch all devices designed for 12V. The system consists of a battery, charger / converter, control panel and a plurality of wires.

Do not forget about the external connector, for charging the autodoma battery from the usual power grid (110V or 220V). You can also use it at home, charging acb during winter storage.

In order to determine which battery capacity you need, easy calculations will have to perform. Let's say you will use the following:

• Halogen lamps: 2 × 20W 2 hours a day \u003d 80 WT⋅ch
• Refrigerator: 45W 12 hours a day \u003d 540 VT⋅

The total power consumption is 620 VT). Now divide the 620 VT⋅ch by 12V and you will receive 52Ah. This is your daily power consumption. As a rule, the battery per 100Ah is enough for about two days of autonomous work.

Calculate, taking into account energy consumers you use. This will help you get the average power digits of electricity consumption.

Gas and electricity are very important issues that need to be considered during the construction of a camper. If you plan to send an auto toward travel away from civilization, autonomy should be maximum. Do not hurry, we carefully think over and calculate.

Furniture

In this question, nothing limits you. You can boldly realize your dreams. Make and install furniture in different ways.

Sometimes quite suitable furniture occurs on various disassembly, we advise you to search. Non-good offers sometimes appear on the Internet auctions, and the furniture is sometimes sold at quite an affordable price.

You can also design everything from scratch. Some firms sell ready-to-install parts, veneer coating. You will only have to apply lacquer (if necessary) and install furniture. You can also contact a professional who will help you in this matter.

A car on the wheels, and even equipped with your own hands, is the dream of many lovers of auto travel and outdoor activities in nature. It provides its owner an amazing freedom when traveling, freeing from the need to search and book a hotel, acquire tickets, pack the suitcases, etc. In addition, its own car can easily travel even a large family, including pets - for this it is necessary to use appropriate furniture , as a rule, transforming.

When for the first time appeared on the road an auto trailer on wheels to answer rather difficult. The first such experience was implemented by Jennings in the 38th year of the last century, although homemade samples of highways appeared much earlier. All autoomom on wheels can be equipped with almost all the necessary attributes of the usual and comfortable life - Bathroom, shower, gas stove, full-fledged sleeping placethat are present even in the smallest auto-volumes that budget Gazelle is often taken as the basis of which in Russia.

Depending on what kind of motor belongs to the wheel on wheels, it can be:

• trailed;
• van;
• combined.

A fairly common practice is currently the personnel re-equipment of suitable transport, the same domestic gazelle, in comfortable auto-volume for travel. But before making an autode on wheels with their own hands, it is necessary to determine the main goal of re-equipment - long or short-term accommodation in the auto house, as well as pick up or make appropriate furniture.

Classes of houses on wheels

According to the generally accepted classification, all autooms on wheels are divided into three main classes:

Attention! Any autod class "A", made on the basis of a bus or truck, according to the transport classification requires the rights of the category "C" by the driver.

Speaking about the classification of the "Wheel House", the following concepts should be highlighted:

Tent trailer

The homemade autode on wheels does not necessarily have to be expensive and complex in the manufacture, especially if it is used relatively rarely and for a small number of people. Some types of highways do not even require the installation of furniture, and are used as a bed. In order to independently make an autode trailer, you will need to make certain efforts and a sufficient amount of time.

The main "power" element of such a car - frame, can be purchased at a finished form, or to assemble it yourself, for which the skill and certain technical knowledge will be required. With independent manufacture, special attention should be paid to the anti-corrosion processing of all steel elements of the future autodoma.

The frame, mounted on the chassis prepared for the autodoma, can be both steel and wooden. The focus on its creation should be given to the quality of the compounds of parts, since when such a trailer-autodoma is moved, the entire design will be subjected to serious dynamic and vibration loads. Inside such an autodoma, you can position a sufficiently convenient bed, and at the time of stops on vacation, the construction of the autoomom is unfolded, and the tent is quickly installed on top. Such an autode on the wheels, the photos of which is presented below, is optimal for short trips and easy-to-go outdoors.

Another option of such a trailer can be viewed on the video:

How to make an autode on wheels do it yourself

In order to make an autode on wheels with your own hands, you can use any minibus, a cargo car or even a bus. In order to create it, you will need to make a lot of effort, time, and be prepared for quite serious material investments, which subsequently pay upon comfort when traveling in its own auto farm.

The process of turning the standard Gazelles in an autode on wheels will necessarily be accompanied by a number of works that are mandatory:

In the case when the trailer house on wheels is created with the goal of long journeys, it is advisable to provide for a good audio video system and satellite TV. If financial capabilities allow, it will be a good option to install solar panels that will extend the resource of the generator.

Attention! In most cases, the re-equipment of the vehicle in the trailer Avtodom requires to pre-bind all the "alterations" to avoid legal problems in the future.

Internal work

Many lovers travel comfortably interested in the question - how much costs authod on wheels in Russia, but learning the cost of the finished option prefers to engage in the creation of the autodoma with their own hands. And this is not deprived of meaning, because to make a car on wheels from Gazelle with their own hands by any person, ready to attach a certain amount of effort and spend its time.

The first thing that will be required to be made inside the cabin of the future autodoma on wheels is to dismantle the partition located behind the passenger seats. If it is attached by bolts, there will be no problems if the welded connection is used, the Bulgarian will be required. After dismantling, you should completely free the interior from the interior decoration. In parallel, it is worth checking the metal parts for the presence of corrosion foci. Take measures to eliminate them remembering that it will be much more difficult to disassemble the finished car.

Before proceeding with the insulation and interior of the autodoma, it is necessary to thoroughly consider the water and power supply system, Since all pipes and electrical cables are better hidden under the trim - it will avoid their accidental damage. After that, an autode on wheels on the basis of Gazelle requires serious insulation. In addition to special materials with vibration insulating characteristics, basalt mineral wool or extruded polystyrene foam can be used for auto far.

An important moment in the autodoma finish on wheels inside and outside is the protective processing of the material used. Thus, additional metal elements outside the autodoma must have high-quality anti-corrosion processing. The elements of the internal object are performed, as a rule, from wood. To process them, it is recommended to use a special flame-protected impregnation, which will prevent the spread of the flame, will not allow the fungus to form, to get rid of which it can be simply impossible.

Certain ideas for creating your own project can be "borrow" from manufacturers of such houses, looking at the following video:

Gas and electric equipment

Any car on wheels - Mercedes or Gazelle requires a special relationship in terms of electricity supply. It is not necessary to naively believe that, without having an appropriate formation, you can qualitatively perform electrical wiring and install the appropriate equipment in the autode. The same applies to gas equipment.

For example, few people know that for a gas cylinder in any auto house, it is necessary to "highlight" a separate closed zone, at the bottom of which the holes communicate with the outer atmosphere should be present. This is allowed to allow propane, which is heavier than air, when leakage from the balloon "leave" an autode on wheels, and not cause poisoning or fire in the cabin.

An important point for the autodoma is the correct calculation of the battery power. To ensure maximum autonomy, you should summarize the daily power consumption of all devices present in the autodomome. The resulting value in watts will be required to divide by 12 (V), resulting in a value in amps-hours (AH) - it is precisely it is indicated on the battery and allows you to judge its power. So, When energy consumption in an auto-volume 50-60 AH / day, optimally acquire a battery in 120-150 AH. Such a car machine on wheels will be able to function offline two days. It is advisable to provide an external socket to recharging the autodoma battery in the parking lots.

Furniture

Despite the fact that it will not be a problem in the purchase of finished furniture for autoomom, according to reviews, it is not able to satisfy all the requests of the car owners, especially creating an authome on wheels on their own drawings. Therefore, the optimal option becomes either its independent manufacture, or an individual order on furniture production.

In most cases, an independent manufacture of furniture is more optimal. Since for a small car, for example, on the basis of standard Gazelle or UAZ, furniture will not need much, and it is not different, and it is not different, at this stage of work you can save. For a proper level of comfort in the auto house, as a rule, the following furniture structures are manufactured:

• dining table, to save space in a small auto house, it is better to use a foldable option;
• kitchen table with washing and working surface;
• open shelves or boxes located under the Ceiling of Avtomoma;
• in the presence of a toilet in the autodomy on the wheels, it will be necessary to make a partition with a door.

When a KAMAZ or bus is taken as a base for auto-volume, the number of furniture listed above increases. Made by an autode on wheels with their own hands, to facilitate the task of determining the type and number of furniture, you can use special computer programs, or draw a detailed plan for the future planning of the Avtomom on paper, where it is clear not only the type of furniture, but also its location.

How can the most expensive house on wheels can be done in the photo - perfectly visible how exquisite and comfortable can be interior decoration.

Construction house on wheels do it yourself, it is worth paying attention to the quality of materials. So for furniture It is advisable to use moisture-resistant materials resistant to household chemicalsBecause cleaning in any type of autoomom - from the bus, trailer or gazelles, often often.

At the moment there are several classifications of houses on wheels. The main structural features include the following categories:

• trailed;
• house on wheels van;
• a van house connected with transport.

Mobile modern houses can be divided into species not only by defined structural features, but also for purpose. In this category, you can note at home on wheels that are used as a permanent or long-term housing, as well as those that are intended exclusively for traveling.

More information about what is, you can find in a very useful and interesting article of our specialist.

There is another form of classification of modern auto houses. They can be divided into three main categories:

• C - small-sized used for short travel;
• With B - half-integrated car homes;
• B A - fully integrated.

The first are made on the basis of a regular SUV, sleeping places here need to be transformed in a special way. Houses on the wheels of the class B are distinguished by a stationary bedroom, which is located in the rear of the vehicle. Avtomoma A class on external characteristics are similar to ordinary buses. They are quite comfortable and, therefore, very expensive at cost, if you purchase them in the finished form.

To save, you can build a house on wheels with your own hands, using photos and special instructions as a guideline. If you correctly perform the main stages of house manufacturing on wheels, you can get such a means of movement, which will have a large windshield size, a fixed driver's seat, as well as special retractable partitions that form different zone functionality and separate bedrooms.

Below your attention is information, how to make a house on wheels with your own hands, which can be considered autonomous. Designs can be equipped with generators, have a gas and a fairly large supply of water.

Autodoma construction stages with their own hands

If you wish to build an autode with your own hands, it is worth considering the instructions provided carefully. Below is described how to build an autodoma body depending on the base, how to equip it and equip it and equip it all necessary for accommodation and travel elements of the configuration.

Create a plan

Homemade houses on wheels are quite serious structures. The process of their construction, here, as in any responsible event, you need to start with a detailed plan. It was at this stage of the work that the master should consider the most basic aspects of the case, all possible trifles and make up the most accurate drawing.

Performing an autode from the trailer with your own hands, you need to clearly adhere to all the indicated in the plan and drawings of moments and rules.

The total internal space of the structure on wheels should be divided into three main zones:

1. Dining room where you can eat, work on a laptop or read the newspaper at the table. Here you can arrange a small sofa, chairs and a table. These items should be easily folded enough to occupy the minimum amount of free space.
2. Sleeping place. This is one of the important zones, since full sleep provides activity and good mood. For the driver, the night rest is very important, since its concentration and attentiveness depends on this, directly affecting the safety of movement during the daytime. It is advisable to equip this zone with a comfortable bed, which should easily rise and free the space.
3. Bathroom with toilet. To equip a similar zone, you need to install the sink, a shower cabin and a modern lookup.
4. Kitchen. This zone occupies the minimum amount of space, since most of its elements are built-in. To ensure maximum comfort, you need to install two burners, a small sink, a worktop, a small refrigerator and an extract.

For the reason that the standard room of the Avtomom is quite limited, its zones need to integrate one to another. It is for this reason that the preliminary plan is so important to follow.

In the process of drawing up the plan, you need to carefully think about which interior items are really required, from which you can refuse.

After that, everything desired with the exact dimensions is transferred to a sheet of paper. Further, the plan is drawn up according to the following principle:

• the estimated area of \u200b\u200bthe Avtomom is divided into pre-separated zones. For example, for the bedroom you need more space than for the kitchen;
• the location of the bathroom and the options for its separation from other premises are noted;
• all furniture elements are drawn, as well as methods for their fastening and folding options.

In the process of drawing and notation of these areas of the room, it is necessary to take into account the dimensions of each element.

Do not forget also about free space. The house on wheels should not be littered with things and furniture objects.

After drawing up a detailed and competently thought out plan, after clarifying the size of the general premises and furniture items, you can begin to perform such a structure as a house on wheels from the trailer with your own hands.

Choosing a base

Among the most affordable budget options that are optimally suitable for everyone who loves something to make with their own hands, you can select three most comfortable designs. A residential trailer with their own hands can be performed on the basis of gazelles, trailer with a fortified chassis and an old minibus. Two of them consider in more detail.

Minibus

It is necessary to begin with an auto order from the minibus with a thorough cleaning of the body, with the removal of upholstery. After that, you need to make special holes designed for ventilation, under the windows and for supplying gas. After these general preparatory work, it is possible to begin special processes related to the arrangement of the residential zone. The work of such a plan must be performed in the following sequence:

1. Alignment on the inner surface of dents and primer all metal parts of the base. This will prevent the appearance of devastating corrosion.
2. The inner surface is the walls, the ceiling and the floor are covered with thermal insulating material.
3. The coating, resistant to moisture, stacked on top.
4. Gas and electricity is carried out.
5. Bathroom equipment is performed.
6. The kitchen is equipped, the furniture is carried out.

It is equally important to put an engine van engine and its running part. For the reason that this is a mobile means of movement, its ability to move should be given no less close attention than arranging and comfort.

Trailer

Perform the camper from the trailer with your own hands is much more complicated than from the minibus. The main difficulty lies in the fact that the walls and the ceiling are required from scratch. The approximate action scheme in this case will be as follows:

1. Cleaning the chassis, trailer.
2. Fastening the basis of the frame of the future autodoma.
3. Plating frame layer plywood.
4. Floor arrangement with simultaneous use of thermal insulation.
5. The design is trimmed with an outer material and is covered with special moisture resistant to the composition.
6. Roof arrangement.
7. The structure of the drainage, conducting wires to provide the house with electricity.
8. Installation of door and window openings.

All this is the overall scheme for doing the house on wheels. Below each stage will be considered in more detail.

Outdoor finishing works

As soon as the main body of the mobile home is ready, you can proceed to the main outdoor work. It is very important to trace the optimal cleanliness of the camping. There should be no dust, dirt and essential defects. This is the guarantee of successful design formation. The main points of external work can be attributed:

1. Removing corrosion and different damage plan.
2. Arrangement of holes.

Speaking of the necessary holes, it can be noted that these are not only window peres, but also those that are intended for the output of gas, ventilation, fuel gorge for water.

Operas need to be performed in the process of arrangement of a cherry. Otherwise, you can encounter certain difficulties.

The exterior arrangement of such a design, as a home on wheels, with their own hands from a minibus or trailer, is to perform the following works:

1. Creating partitions between the main body and front seats.
2. Arrangement of internal isolation. It must be remembered that the total temperature and sound insulation indoors will be directly dependent on the quality and competent installation of this material.
3. The construction of the construction from the roof to the floor coating.

The modern market presents a huge number of various materials. The choice can be carried out on the basis of personal preferences, environmental features, a common material situation, as well as the type of body used.

Equipment at home

Equipment of the autooma lies in its mass in its internal arrangement. To make the house comfortable and comfortable, you will need to spend water in the house, light, gas, as well as install some furniture.

Water supply and bathroom

The prerequisite for water supply on wheels is the provision of supplying precative water. To implement this process under the sink, you need to install a couple of canisters and a compact pump that will provide the necessary flow of water to the crane.

Thinking wastewater removal is the basic rule with the arrangement of a full-fledged toilet. The withdrawal can be carried out by means of a special hose located in the outdoor surface. Some engineering knowledge, and it will be possible not to drain the water manually into special portable tanks. Although many do it.

As for the bathroom, the optimal option is considered to be the acquisition and installation of the dry lad.

Electricity

For the accumulation and storage of electricity in a wheelchair, one or more special batteries can be responsible. The device data can be charged during the operation of the tractor or when connected to external sources. When equipped with electrical networks, modern inverters occupy a special place. These are special devices that are capable of turning direct current with a voltage 12 V to a variable equal to 230 V. Due to this, a device operating from 230-volt standard can be connected to a 12-volt network without problems.

Heating and gas

The gasification of the design described is to be placed in a gas cylinder room. To do this, select a separate closed zone. In its lower part it is necessary to equip special holes that come out.

Make a person's personnel - not too complicated task for an experienced master. But the dates of such construction can be strongly delayed due to the continuous improvement of the design. In order not to get into such a situation, you should think in advance the interior, refusing obviously unnecessary elements. This is especially important when equipped with small cars, for example, when creating a house on wheels from Gazelle with your own hands.

The mobile home has indisputable advantages - comfort, comfort and mobility. Moscow is a noisy city, from which you want to sometimes leave. The owners of trailers do not have to look for a place for overnight stay, and travels become very economical. If you used to use this original housing, it was not possible to get an opportunity, you should first get acquainted with their classification.

Types of auto houses and their classification

Choosing the type of future mobile housing, one can be guided by its division by:

• kind - there are trailed, van or combined with a car at the wheels;
• class - distinguish three classes of autodomas comfort;
• trailer type - exist trailers trailers, hybrid and fifth-wheel trailers.

If everything is clear with the trailed view of the mobile house, then the difference between the van and combined auto-bodies is not immediately visible. In the first version, the residential premises is located in the car van and separated from the driver's seat.

Such an option is suitable when traveling together, when no one remains in the "house" at the time of relocation. Thanks to this design, it is possible to enter more functional furniture using a deaf front wall.

Converted from Gazelles or minibuses of the Avtomom is just combined.

Comfort class can be called conditional. So, to homes on the wheels of class A "include spacious trailers made on the chassis of large trucks. Outwardly, they resemble a bus, may have folding structures, and inside the functionality they do not differ from a small apartment.

It should be borne in mind that the driver should have the right category "C" to manage this transport.

The spaces in it are much smaller, but still traveling in them convenient. What is important - it is possible to manage such a car with the rights of category B if the weight of the car or the total weight of the car with the trailer does not exceed 3.5 tons.

The class "C" indicates the most simple autoomom. It may be a small trailer or converted to a minibus. There is no separate sleeping place here - its function is performed by folding sofas or chairs. But equipping such a mini camper with a trunk-tent, folding canopy and a set of furniture for camping, you can get a comfortable stay with a minimum cost.

Similar trailers designers are also called hybrid to distinguish them from simple trailers. Separately, it is necessary to note the FIVSVIL trailers, the form of which is designed for use in conjunction with pickups. Due to this, it is possible to reduce the length of the entire caravan, because part of the trailer hangs over the body of the car.

Errors in the construction of houses on wheels do it yourself

Prices for mobile homes are noticeably "biting". Not surprisingly, the desire of the mace of the heads of families to save the budget and do it all. It is important to be wise and learn from other errors:

• it is not necessary to do all of the girlfriend - the house will have to live at least a week and you want to stay with comfort;





• it will require serious refinement of the body, the heating systems, wiring - without the skills of the car mechanic, do not do;



• if the shower and the toilet still managed to enter, do not forget about the tank for a drain - pour out dirty water on asphalt or the lawn is extremely unethical;
• it is better not to forget to make a connector for connecting 220V on camping parking, well, and the converter for 12V from the car battery.

Production of trailer with its own forces

If the difficulties are not frightened, and the desire to action is not strangular, you can try your strength in the construction of the house. And to redo the gazelle or build from zero trailer trailer - the choice is strictly individual!

House on wheels from Gazelle do it yourself

You will need a Bulgarian, a welding machine, a hand saw on a tree and a lot of patience. Phased the modernization of the car looks like this:

1. The seats from the cabin are taken, the old sheathing is removed. All metal parts are processed by a special solution that prevents the appearance of rust. Walls and ceiling are insulated with foam polyethylene, plywood sheets are laid on the floor. The entire wiring passes under the sheaving of the floor and walls, it should be thought out in advance.



2. Right in the bodies are welded frame for furniture. If you set a smooth car, you can not use a pipe as a level, overlooking the ends into the bottom edge of the window openings. After a draft welding, the frame is removed and everything is welded, it is cleaned and reappeared inside.



3. Window openings are punishable by carpet. Ceiling panels are also installed. After the interior is completed, it is possible to mount the racks under the mezzanine and mount furniture frames.



4. For the front seats, you can make a swivel mechanism. To do this, you will need anterior hub, for example, from VAZ and part of the rotary rack. The scheme is quite simple.





5. The final stage is to install furniture on the frame, the connection of the lighting, the installation of the pump for the kitchen service. For cooking, you can put a small gas stove per single burner.



6. Instead of welding the furniture frame, you can use ready-made headsets, reinforcing them from the inside with corners and additional screws. Bold the kitchen is also needed to everything - the floor, sofa, wall. This is done to protect the furniture from the breaking during the movement along the bumpy roads.

We should not forget that such a remission of the car requires registration in REO. To do this, you need to write a statement and get a resolution from the Tehotel of the State Training of the FAI and the Protocol of an authorized organization.

Stylish plywood trailer

If there is a carbon car, sin does not take advantage of the situation and do not make a pretty trailer "drop" for overnight stays outside the city. For this:

1. Side walls of the future van are cut and attached to the base. All holes under the doors and windows, as well as to relieve the frame, should be cut in advance, so it's better to think about the drawing.



2. Shelves are collected from the furniture shield and are installed on the base. The same shelves will perform the functions of the front and rear walls of the van.



3. On the shape of the van above the shelves on both sides, a plywood sheet bent, the power frame of the bar is fixed above. One side is made lifting, opening access to the kitchen.





4. The top hatch and the roof window is cut. The entire frame is insulating, the wiring is stacked.



5. On top everything is stuck with veneer sheets. When door and window openings are cut, you can proceed to the outer painting and varnishing.





6. Installed doors, top hatch and supply and exhaust ventilation. After fixing all the accessories, overall lights and wings for the wheels, you can safely go on the journey!

And the video shows the detailed assembly of the autooma with the installation of solar panels:

This type of recreation and travel option uses lovers of freedom and independence from tickets and flights. This is a good decision to have a trip to the rest at the same time both the car and housing. Thanks to the presence of a mobile home, the family can travel in a comfortable environment and stop where it wants and when I want to bind to time. Campgrounds acquired their popularity at the beginning of the 20th century.

House on wheels do it yourself

By this independent rest, you can see the places that unavailable from an airplane or train. In addition, camping while repairs in the apartment or building a house on the site can serve as temporary housing. You can also rent a truck when there are no travels in the plans.

The cost of such pleasure is rather big, some options reach and prices of the ordinary apartment, but to save funds, you can create a camping or an autode personally.

Variants of large campgrounds are converted from buses and overall vans, but it is too expensive for those who do not feel sorry to spend not small money for such megakomfort.

Variants of Campgrounds

There are three budget options for self-taking:

For the construction of the Avtomom, you need it:

1. Have wheels.
2. Visually draw a house-camping plan, drawings are one of the main points in the creation of a mini autoomom.

When drawing up a plan, you need to think over all those comfort details that are in a regular apartment.

Domestic communications Avtodomom

As in any ordinary house in campsite too need communications - It is electricity, water, gas, toilet and, perhaps, shower. Without these amenities, mobile housing will not be comfortable. In order for the campsite to be light, it is desirable to purchase a battery battery and a device for recharging. It is necessary to think about the inner wiring in advance. It is necessary to take into account the external connections when charging and the fact that they have different tanks.

To drain waste through the hose, hidden in the floor it is easier to use the usual bucket by placing it under the body of your autodoma. Water for the kitchen can be stored in large capacities, immersing the pumps in them to feed it into the crane. To merge used water, the tank is also used inside or outside the room. A small shower can be constructed as a mixer attached, for example, over a sink.

Unfortunately, the usual toilet will not work in a mobile home, because there is no place for the sink of waste difficult to be permanent. Here it makes a beautiful look.

For the lighting system in the campsite will be required :

• battery;
• charging;
• wiring.

What is needed for heating in its auto.

Introduces an autonomous heater, you can buy a battery and a gas cylinder, because it is also useful in the kitchen and the refrigerator. It is not worth using a lot of electrical appliances and techniques for two reasons - this is an additional consumption of electricity and the load on the wiring, since it is a small room compared to the house. Electrician services need to be used when working with gas, since it is very risky himself, if you are not an electrician.

Interior arrangement of camping

Ventilation system.

It is also important to deal with ventilation so as not to clog the smell room.

The location of the holes is important because it is better not to put them into sight from the consideration of beauty. It is best to place them in the bottom of the walls above the floor, you can also put a gas cylinder.

Furniture.

Practicality and compactness in the placement of furniture is a pledge of comfort in campsite, given the presence of a small space, as well as layout. Folded or retractable bedrooms, tables with traditional stools and everything in such a spirit will create the necessary comfort and the desire to relax in the personally made auto farm. There are special compact headsets on sale, but if there is a desire and time, it is quite possible to make furniture yourself, using old boards, countertops, and for the sofa and chairs, take the seat from the same car or old wheels, too, can be converted into chairs or stools.

Camping joorer.

In a similar home, if it is one-storey it is recommended to make two windows so that you do not have to spend the electrician during the day. The door is better to make a bivalve, so that it does not make and not blown the wind into the room.

Minibus or automotive, scattering the principle of transformation of each.

To begin reincarnation of a minibus of type "Gazelle" to the campsite you need to clear the body, remove seats and upholstery, make holes for windows and valve for gas supply:

Body preparation

For body processing you need:

• anti-corrosion is applied primer, and then you need to warm the walls, gender and ceiling with thermal insulation;
• coated plywood or carpet coating;
• that glue that Phaneur picks up good quality so that the insulation will serve you for a long time;
• after the warming stage, you can proceed to electricity and gas, then go to the kitchen, think over the sink and ovens, install tanks for water, bathroom and at the end to place the rest of the furniture for recreation, beds, chairs or stools, lockers and shelves depending on the existing space.

The house from the trailer is different, there are only wheels and you need to do everything from scratch, like on the site, first build a box - the future room.

Housing from the trailer is made as follows:

To make the roof in the auto house, you will need :

• collect the framework of bearing structures - beams if you want a triangular roof;
• next, we are wearing plywood;
• it is necessary to cover it with water-repellent material.

After that, you can make and attach to the rear wall with the outer side of the drain from the rain and from the inside for the drain of waste. Also need to bind the outer walls. Internal wiring and thermal insulation need to close the fiberboard and on the stage of manufacturing one or two doors.

To protect the tree from a drying, and pests need to be covered outside and inside the wall by primer, apply the paint layer on top. For aesthetic look, you need to close the threaded holes and also cover the paint. All these procedures will reliably protect the house from the influence of external harmful factors. At the end of the work, since this is a trailer, then you need to install headlights and wings.

Similar Mobile Dominations are divided into three categories:

Traveling in his homemade house on wheels, of course, nice and comfortable. However, it is necessary to solve for yourself if you can independently master all the work on the construction of the Avtomom.