Daewoo Nexia car drivers often change the headlights on their cars. Goals are pursued at the same time. Some - for tuning your car, others - from practical purposes, in order to shine better at night, the third is from the need. The necessity lies in the fact that, for example, one of the heads have moved the contacts, and it simply does not shine, or hit an accident.

To do this, you must have a minimum to get a fair and disassemble it. This article will describe in detail how it is correct and without much effort to remove the block headlights on Daewoo Nexia N100 and Daewoo Nexia N150. The fact is that the fastening of these parts on these two models is distinguished significantly. On the first Nexia, replaced the headlights very simply, you do not need to impose anywhere, all bolts and attachments are in an affordable place for screwdriver and hands. With Nexia N150, it is much more difficult.

If one of the lights burned, for example, far light or turn signals, then do not hurry to take a whole block headlight on the Nexia N100. Detailed instructions, as without removing the block headlights to remove and put new lamps:

1. Turn the plastic cover counterclockwise and remove it from block headlights.
2. Disconnect the electrical connector from the lamp
3. Decorate the spring fastening of the lamp fastening
4. Carefully remove the lamp
5. Install a new lamp in reverse order

Unfortunately, this instruction is only suitable for non-missions of the first models. In the second way, it will not be able to die. There is, except that the ability to withdraw the lamps without removing the block headlights only on the right side, after removing the air filter housing. With the left side everything is much worse. It is very difficult to bring up to the left block-spotlight, it is just the case when it is easier to remove a fully block headlight, because in addition to the battery, Daewoo Nexia N150, the engine control unit (ECU) is also located next to the block-spotlight. Therefore, on this model, it is possible to replace the lamp only when the block headlight is removed. If, all the same, we decided to change the lamps without removing block headlights on Daewoo Nexia 2, here is the detailed instruction:

• For the right side: to withdraw a plastic air intake, unscrew the fastenings of the air filter housing, to move away to the side;
• For the left block headlight: to pull the terminals, remove the battery. Unscrew 3 bolts of the ECU (head 10). Release the place by moving away everything aside.

But, again, it is best to enhance the block headlights on this model. Usually, to remove this part you need to shoot and bumper, as well as one of the headlight mounting bolts is behind it. But we will offer a way to remove the block fair without removing the bumper, though you will need a couple of tools that are not for everyone. Detailed instructions:

1. To begin with, unscrew the affordable headlight mounting bolts;
2. Next, it is necessary to find the extension nozzle of the screwdriver, which looks like a cable in a plastic shell, or a knot;
3. Propache the knocked knobs between the header and the bumper. We dress the head on the gorochka to 10 and unscrew the hidden fastening of the block headlights. In order not to scratch the coating of the bumper, put the sheets of paper in the slot;
4. Steering the headlight, withdraw it, after which disconnect the plug.

Replacement of lamps on the rear Block Farah Daewoo Nexia

Fortunately, the car was not particularly transformed from behind in the plan of optics, and on this with the replacement of the rear block headlights you should have no problem. It will take no more than an hour. If there are smooth hands and great desire, you can cope in 20 minutes. Detailed instructions:

1. And so, first you need to install a car on a flat site and open the trunk;
2. Now you need to disconnect the negative (-) output wire on the battery;
3. Unscrew the two plastic carrying nuts for fastening the rear light protection (in the trunk);
4. Pulling the tongue, remove 4 piston fastening the rear light protection;
5. Remove the rear light protection fabric itself;
6. Squeeze two lock fixtures of the bulbs holder;
7. Withdraw the lamp holder, slightly pressing and then turning counterclockwise;
8. Install new lamps. Be sure to install only the lamps of the power that are defined in the instruction manual;
9. Inside the block headlight, you can change the lamps of the overall fire, direction indicators, light when the rear transmission and stop signal is turned on;
10. The assembly of parts is made in the opposite order.

As you can see, it is not always necessary to remove the lamps to remove the block headlights, although sometimes it is simply necessary. The case on the replacement of lamps both the front and the rear will take you no more than half an hour. I hope this article was useful for you.

Looking for LED lamps for their "Nexia"? Welcome to the online store Netuning. On the site you are guaranteed to find the right product. Make sure this personally.

Directory of LED products for your car

On the catalog stitches, 46 lights of the bulbs for Daewoo Nexia are presented. We offer lamps only from proven and well-known manufacturers: LG, Samsung, Philips. The fact that all the lights are granted a minimum warranty on all the bulbs by us.

LED lamps are available in the directory for:

• head lighting;
• lighting salon and trunk;
• turn signs;
• overall lights;
• reversing headlight.

Advantages of devices with LEDs

LED lamps in light characteristics are noticeably superior to halogen analogs - the LEDs are significantly less loaded by the onboard wiring of the machine, and there is nothing about ordinary "heat" and there is nothing to say - this is the last century. Another weighty plus is a long service life, up to 50 thousand hours of work.

Order LED bulbs for the Daewoo Nexia car in Netuning right now! Return up to 4% of the cost of purchased goods on the bonus account (from the calculation of 1 point \u003d 1 ruble) and pay the following purchases with accumulated points.

Ask questions on the product and purchase LED products for headlights through the site, directly in Netuning stores or on the numbers specified above.

OUR PARTNERS:

Site about German cars

Lamps used in the car

Any modern passenger or truck can be serviced and repairing independently, in the usual garage. All that will be required - a set of tools and a factory repair manual with a detailed (step-by-step) description of operations. Such a guide must contain types of used operational liquids, oils and lubricants, and most importantly - the torque of all threaded connections of parts of the components and car units. Italian cars - Fiat (Fiat) Alfa Romeo (Alpha Romeo) Lancia (Liancha) Ferrari (Ferrari) Mazerati (Macerati) have their own design features. Also in a special group you can Allocate all French cars - PEUGOUT (Peugeot), Renault (Renault) and Citroen (Citroen). German cars are complex. This applies to Mercedes Benz (Mercedes Benz), BMW (BMW), Audi (Audi) and Porsche (Porsche), in a little less - to Volkswagen (Volkswagen) and Opel (Opel). The next large group, isolated on constructive features is American manufacturers Chrysler, Jeep, Plymouth, Dodge, Eagle, Chevrolet, GMC, Cadillac, Pontiac, OldSmobile, Ford, Mercury, Lincoln . From Korean firms should be noted Hyundai / Kia, GM - Dat (Daewoo), SsangYong.

Most recently, Japanese cars had a relatively low initial cost and affordable prices for spare parts, but recently they caught up with these indicators prestigious European brands. And this applies to almost the same degree to all brands of cars from the rising sun country - Toyota (Toyota), Mitsubishi (Mitsubishi), Subaru (Subaru), Isuzu (Judza), Honda (Honda), Mazda (Mazda or as said before Matsuda) , Suzuki (Suzuki), Daihatsu (Daihatsu), Nissan (Nissan). Well, and cars released under the Japanese American brands Lexus (Lexus), Scion (Singing), Infinity (Infinity),