How to open the hood if the cable broke

Car owners are often faced with the problem of opening the hood due to a torn cable. This is an important detail that helps to access the "heart" of the car. The cable drive drive delivers a lot of trouble to the driver. The breakdown happens is always unexpectedly and at the wrong time.

Imagine the situation when winter in the morning you are in a hurry to work, trying to start a car, but nothing happens. Urgently jerk for the lever, opening the hood to see the engine. The characteristic sound of a broken cable is heard. And you understand that you have to go to the taxi.

Any driver should be able to leave such situations. This will allow you to do without services of car services, save money and time. This article will help learn to open the hood if the cable has broken. By applying tips, you will handle the problem.

how often should I change the spark plugs

The design of the hood, the lock and the location of the cable drive on cars differ. But the repair sequence remains the same in all cases. Owners of domestic brands were lucky more, as manufacturers for many years have not made significant changes in the design of cars produced. Therefore, open the hood will always work without any problems.

Most often, the cable breaks around near the lever, less often under the hood. In the first case, it is easy to cope with breakdown, and in the second will have to tinker.

When the cable broke off in front of the lever, this is the simplest situation. To eliminate breakage, inspect the place of attachment of the cable and the handle of the opening of the hood, perhaps flew from the stopper lever - insert it into place and secure. If you notice that the cable itself breakdown, then you will need pliers. To open the hood, try hard to grab the cable along with the casing and pull down. Perhaps the first time it will not work. If a break occurs, cut the casing and wrap a metal cable for pliers, and then pull with a lot of effort - the hood will open.

When the cable triggered under the hood if you inspected the mount inside the cabin and did not find anything, it means that the cable climbed under the hood next to the castle. Such a problem is considered the most serious, because it is necessary to somehow get access to the castle and forcibly shaking.

For the hood, opening back, there are two main ways that can be applied in domestic and foreign production cars.

1. Through the grille of the radiator. On many models, you can get to the castle using a homemade hook from wire or needles. Shoot the hook into the slot of the radiator grille. You can bring up through the air intake. Remove to the tongue to which the cable is attached and pull it for it. Some cars have a solid grid without slots. In this case, it needs to be removed, but it is not always easy to do. In extreme cases will have to break. The new lattice is inexpensive.
2. Through the protection of the crankcase. This is another way that will help get to the castle. It will take the observation pit, but if there is no such, it will have to repair lying on the ground, subdomains the car. Remove the metallic protection of the oil pan of the engine. With the help of a long screwdriver, get to the tongue to which the cable is attached and put the left (toward the driver). Perhaps you will need the help of another person. You pull the cable, and the assistant first presses the hood down, then raises.

If the hood opens forward, in this case you have to tinker. You will need a homemade hook. You can get to the castle through the air intake of the hood. Remove it and through the grille hooked for the cable. In some cases, you have to cut one division, as the narrow slots interfere with performing work.

If it did not work out, then another way will help you. Lift the edge of the hood in the castle area. Pull the sealing gum - the slot will turn out. Then a long scolding or crochet picker the cable and the hood will open.

how to open the car if she froze

Frequent cause of the cliff of the cable is natural wear. Over time, it is stretched and shared in bending places. No lubricant also strongly affects its service life.

If the lock and the cable have not been processed for a long time, it happens to jam. The driver has to apply a lot of effort to open the hood. As a result, the cable drive does not withstand.

Stay regularly for the condition of the lock and the cable. At low temperatures, they freeze. When it felt that the hood opens with difficulty, reveal the cause and eliminate the malfunction without waiting for breakage. If still the cable cut off, then install a new one. Try to reliably fix it, not allowing inflection. In the end, treat the castle with solidol. After the qualitatively done work, you will for a long time forget about the problem with a broken cable.

Car owners know that a breakdown of a system can occur at the most inopportune moment. If you need to urgently open the hood, but the cable has broken off, a number of actions can be taken. This will help quickly solve the problem.

Most often, the breakdown in this area of \u200b\u200bmechanics occurs in a strong frost. In order not to mess around with the car for a long time, every car enthusiast should know how to open the hood and why such a trouble happened. You can eliminate it with your own hands, and quite quickly.

To understand how to open the hood lock, you need to figure it out in the device of this system. For obvious reasons, it is impossible to raise it from the street. The opening of the lock occurs exclusively from the cabin.

The drive is characterized by a fairly simple scheme. It consists of a cable that creates craving. He informs the castle from the hood with the salon. The electromagnetic mechanism is connected to the cable and puts it into action. This system has a switch. It is he who leads to a movement of an electromagnetic mechanism. The circuit when closing the electromagnetic pulse from the controller.

Sophisticated system operation allows you to open the hood. It triggers when the machine is removed from the alarm. If the cable has broken off, the process will not be able to come true. The rope can break into the place of the lever, which is pulling the driver. But in rare cases, the breakdown can occur under the hood.

We ask how to open the hood on the VAZ or another car, it is necessary to learn the cause of the problem first. Such problems most often arise in the winter. Upon cold, the lubricant begins to thicken. The cable is simply shared, and an open occurs.

Sometimes the cause of problems can serve as a long service life of the vehicle. Some new cars can also be equipped with rather poor-quality components. The cable can break through and for this reason.

The thrust can be a stranded or single-core wire made of steel. It is in a protective shell. On top of it there is also a special metal braid. But even such materials may be influenced by adverse factors.

In some cases, more serious difficulties may arise in solving the issue, how to open the hood. "Focus", the hood of which is revealed by a rather original way, may require the intervention of an experimental auto mechanic.

The fact is that some car models, the operation of the mechanism is performed quite difficult. The cable is driven by no lever, but with the help of a lock that is located on the radiator grille. Moreover, access to it hides the manufacturer's logo. It must be turned, only very neat.

The key is inserted into the lock and rotates counterclockwise 90 ° until it clicks. At this time, the hood is partially released. Next, the key movement is made in the opposite direction. Only after that you can raise the hood. This is a complex system, with a breakdown of which will require the help of a specialist. But in conventional mechanisms with a traction cable, everyone can understand.

To understand how to open the hood if the cable has broken, you must be inserted into this procedure. The complexity is that it is quite difficult to determine in which one place there was a break. It can be in the middle of the cable, as well as near the castle or, on the contrary, at the start button.

To produce all the work quickly and correctly, it is necessary to prepare a set of standard auto mechanic tools. Long screwdriver will also need. To protect hands from dirt, it is necessary to prevent them with cotton gloves.

Next, you need to get acquainted with the instruction manual for the vehicle. This will help you understand what the location of the cable and the castle in this car model. When conducting operation, the engine must be cooled to an acceptable temperature.

Considering the technology, how to open the car hood, it is necessary to understand where the gap occurred. For this, the lever is carefully examined. If the cable is not suitable for it, then the gap occurred in the cabin. It will be great luck if you manage to detect the tail of the traction mechanism. Then it can be pulled out.

If you pull the tip, the hood will open. You can fix the breakdown later. In some cars, it will have to completely dismantle the mechanism of traction from the cabin. In the opening is the end of the cable. It is pulled out with the help of pliers.

After detecting the place of the break, you will have to replace the harness of the mechanism. In some cases, it will be necessary to install a new lock and other details of this system.

If the scope of the cable occurred under the hood, the procedure will be somewhat more complicated. To do this, it will be necessary to remove the grille. It can be quite simple to get, for example, an outdoor hood VAZ-2109. The radiator grille of the old Soviet models of cars is attached on plastic latches.

After removing the grille, you can get to the pumpapot space, albeit a small part of it. Next should refer to the instruction manual. It describes in detail the layout of the hood lock, as well as its drive.

Next you need to use a long screwdriver. With it, you can try to reach the same part of the castle to which the cable is attached. In this case, the hood will open. Then the tongue is simply moved and the hood is raised. In this case, the cable will have to change.

The most difficult way, how to open the hood of a domestic car or a foreign car, is the disassembly of the motor crankcase. If the previous two approaches were not crowned with success, this method will allow the opening of the castle. This is a rather laborious process. It will require an overpass or sightseeing pit.

To get to the opening lock of the hood, you must remove the protection from the engine crankcase. Most often it is attached by bolts. With the help of tools, they are unscrewed. Protection is getting out of the grooves. Many dirt accumulates on its back side. Therefore, when performing this work it is necessary to protect your eyes.

The flashlight needs to illuminate the opened space. Here you can find the castle that opens the hood. If you can reach it, you need to make the actions described above. This will allow you to open the hood and replace the cable.

When reading the technology, how to open the hood, you can eliminate this problem yourself. At the same time, the repair does not take much time and means. But in particularly severe cases, it is better to contact the service center.

Quite often, drivers arise a question - how to open the hood? Most often, this element of the design encourages due to the fact that the cable is broken. The reason for this - the deterioration of the cable or the absence of a lubricant in the movable mechanism. This seemingly simple item plays a very big role. It is thanks to the cable that the hood machine can open and close. Therefore, when it breaks down - it brings significant trouble to the driver.

The most unpleasant that the cable break is mainly happening when it urgently needs to go somewhere. Therefore, any driver should be able to open the hood of the machine in the event of a malfunction. There are two ways to make it, which depend on what kind of place the cable has broken.

Most often, the rope is torn in the place where the driver pulls behind the lever. Less often he breaks under the hood itself. The second case is much more complicated, but we know how to solve such a problem.

First, you must clearly understand where the cable was broken. To do this, you need to spend your hand around the lever and make sure that the rope does not fit to it. In most cases, the cable is attached to the back of the lever. Carefully explore the area around the handle to clearly understand exactly where the rope was broken.

Having determined the place, take the pliers and hook the edge of the cable. Then pull it on yourself, that is, towards the cabin. We recommend that you make a hook at the end of the cable using the same tool. Then the pliers will not slip from a single cable. If you do everything right - the hood will soon open.

As we have noted, such a breakdown is much more difficult, so you have to tinker with it. If you do not particularly understand the car's device - better contact the specialists. But if you feel the strength to cope with the problem yourself - follow our recommendations.

The hood can open forward or backward (in the course of the car). If it opens forward - you have to remove the decorative grid from the front of the car to be able to bring to his castle. Inspect the grid and try to understand whether you can remove it yourself, or better turn to professionals. Contact this detail gently because it is not scented. If you managed to remove the grille - right behind it you will see the hood castle.

On the video - the opening of the hood with a torn cable on Opel Fashion:

This is an even more difficult case. There are two options for solving the problem. The first is to get to the castle through the air intake holes in front of the windshield. But it should be noted that not every manufacturer provides access through this window. In this case, it will be more advisable to use the second method. Unscrew the fasteners themselves - for this you will need to take again to remove the decorative grid from the front of the car. After opening the hood, you need to change the cable to be able to use it again.

On the video - the discovery of the hood with a torn cable on the VAZ:

Many motorists are wondering - how to change the cable? This procedure is not too complicated, but it requires the reserve of patience and the sequence of performing the necessary actions. You must do everything very carefully.

Start replacing the cable need from dismantling it. It is necessary to remove the torn cable from the lever to open the hood. Remove the handle or look under the dashboard. If the rest of the cable is seen - you can compress it with pliers and pull on yourself. When the hood opens - you will get access to the cable.

If the cable cut off under the hood itself - you need to go to the pit and remove the engine protection. Wait until the motor of the car cools, otherwise you can get a burn. Run your hand between the radiator and the engine block. You must find the castle spring and pull it out. In most cases, the item can be squeezed towards the battery. Having done these actions, close the hood.

Now you need to remove the old cable - pull it out of a special fastening in the spring. Usually it is enough to use scolding or passage. Next, you must remove the fastening near the lever. Perform this action extremely carefully, since access is very difficult. Release fastenings in the body part. Usually they look like ordinary rubber plugs. Now you can safely pull the cable.

On video - replacement of the hood cable, part 1:

Mount the new cable is necessary, starting from the engine compartment. Secure it on the spring just as old. Insert the rope into the mount and fix using the rubber plug. Before running it in the salon - put on a special plastic cap. It will execute the role of the limiter.

To serve a cable to the salon is needed through a special hole. Fix it is necessary on the lever. Tightening the loop on the handle, ask someone to pull out the spring along with the cable. Then he stretches better, that is, it will be better installed. But do not overdo it! Too strongly stretched rope will burst very quickly. Everything is good in moderation.

On the video - the replacement of the hood cable, part 2:

Finally, let you give you a small advice. In order for the hood cable to serve as longer as possible, carefully lubricate it with lithol. By replacing the part, select a multicore cable. It is much stronger than one-core, so long will not break down. In addition, such a product is very flexible, not stretched and slowly wear out. We also recommend more carefully to treat the handle on the hood. Do not twitch it sharply - contact the lever as careful as possible.

Please leave your comment on the article! We are interested in your opinion.

How to open the hood if the cable broke or broke the castle?

Under the hood of the car hide the most important components and aggregates. In this regard, drivers periodically emerges in the opening of the hood. It can be a replacement of oil, filters, spark plugs, or repair work. But sometimes it happens that after jerking, the hood lever does not open. This is an unpleasant situation, especially if in a few hours you need to go on the road. But there is a way out of the situation. How to open the hood if the cable broke or broke the castle? Consider in our today's article.

To accurately determine the place where the cable broke or flew, is very difficult. Sometimes it may be the castle itself. But we will tell about it at the end of the article. Usually the hood does not open due to the cable, which drives the mechanical lock.
The drive breaks down in two places - in the cabin, at the lever, or under the hood. In the middle, it practically does not break. Depending on the place of the cliff, there are several ways to exit the situation. We will tell about them below.

What do we need to prepare? Before opening the hood on a vase and any other car with a damaged cable, you should use the pliers and a long screwdriver.

How to open the hood if the cable broke in the cabin? First you need to get to the location of the lever. If it moves freely and effortlessly, and the cable is not fixed under it, the second part must be sought in the tunnel (actuator shell). Usually part of it will look out. With the help of pliers, we carefully take care of its edges and pull the element on yourself. The larger the area of \u200b\u200bcontact, the easier it is to cling to the cable.

On some foreign cars in place, the lever is mounted completely removable mechanism. How to open the hood in this case? We will have to completely extract this mechanism from the front panel and find the end of the cable in the resulting slot.

If the element is connected to the lever, but the latter moves freely and effortlessly, it can be assumed that the drive broke in the castle area. How to open the hood in this case? To do this, you will have to remove the radiator grille. On domestic vases, it is attached on plastic latches. And there are no problems with her dismantling. On foreign cars, the situation is more difficult. In order not to break the grid, another method will have to use here. A long flat screwdriver comes to the rescue. With it, it is necessary to find the cable input and pull the tool for it. You can get to this place through the grille. But if the dimensions of her holes are small, it will have to get through the bottom, parallel to the cooling radiator.

This is the most serious case. If the castle broke, the first two methods are simply powerless. What to do in such a situation? How to open the hood without prejudice to the car?
In this case, we will need an observation pit or aleacade. Additionally, you have to dismantle the engine crankcase. It is attached on the bolts (for plastic, the key is usually suitable on 8). We remove the protection from the grooves and with the help of the flashlight carefully examine the booming space. We need to find the inside of the hood castle. How to open it? You can do it with a screwdriver. But it is not always possible to reach the edge of the castle. In this case, it is necessary to install the extension on the screwdriver handle. Fixed to the right place, pull the castle aside. The hood can be bolder to open.

A similar problem often happens at the owners of domestic vases (including the "Lada Samara"). How to open the hood if the cable flew? It will take two keys on 17. They need to unscrew the bolts with "crabs". Next take the key to 8.
Or we unscrew the engine's small protection. You need to unscrew five bolts. Move one of them aside. Next, go on the hand between the cooling radiator and the engine. We need to find the lever on the TV. We move it to the side, to the battery. Then you can safely open the hood. If you are going to continue to move, do not forget to set the engine back protection. However, to replace the damaged item, you will have to remove it back. Experienced motorists recommend changing a cable in place - it will save a lot of time. How to produce the procedure yourself, we will tell below.

If this element has broken, it urgently needs to be changed to a new one. To begin with, an old damaged element should be removed. The cable must be pulled out of a special fastening in the spring. This will require pliers or screwdriver. Then removes the fastening near the lever. It is very difficult to get to it. For convenience, you can use a mirror. To release fasteners in the body part, you need to remove the rubber plugs. After that, we remove the cable outside and install a new one.

How is the installation? Install a new cable is needed from the engine compartment. Initially, it is fixed on the spring. Next, the "rope" is installed in the mount and securely fix it with the help of a rubber plug. Please note: before running the cable into the cabin, it should be put on a special plastic cap. He will serve as a limiter. Wake up a cable through a regular hole. Drive fix on the lever. Next, we need help with the second person. It will pull the spring along with the cable. At this point, we tighten the loop on the handle. So the cable will stretch better and will be highly installed. But be careful: too stretched drive can burst quickly.

In order not to face the problem of flying or bursting the cable, lubricate it with a periodically litol or similar means.
And when buying a new, pay attention to stranded models. According to feedback, they are much more reliable than regular and they are very difficult to break. When opening the hood, do not pull the handle sharply. In 80 percent cases, the cable is broken because of this.

Such situations often find motorists by surprise. In order not to waste time (especially if it is winter), you need to know in advance the ways to open the hood manually. Of course, after such an operation, it is necessary to urgently change the drive of the cable or the castle itself. Otherwise, all procedures will have to repeat again.