How to remove rust from the body of the car with your own hands

The operation of the car is accompanied by an aggressive impact on the body. Increased humidity, temperature difference, chemicals, mechanical effects, vibrations - everything affects the state of protective coating of metal elements.

Over time, rust processes that destroy metal are launched. Independent methods of struggle involve the removal of rust from the car body with their own hands. Sequential execution of all steps allows you to maintain body characteristics, extend the period of operation.

Causes of rust formation, vulnerabilities

The speed and process of rusting on different elements of the car is different. It is recommended to conduct a regular inspection of parts, which will allow to identify the foci in the early stages.

The main causes of rust formation:

• small crushed stone, damaging paint and varnish layer during movement;
• chemical compounds used in winter.

The most vulnerable places:

• the bottom of the body that is constantly exposed to moisture;
• welded seams where cracks are formed;
• hidden, hard-to-reach cavities where moisture accumulates;
• areas where the protective layer of paint is damaged, varnish.

Thinking on how to get rid of rust on the car body, you need to prepare a place for work, tools and materials.

What may need:

1. Power tools - Drill or Bulgarian with an appropriate nozzle. In the absence of the tool use a metal brush.
2. To eliminate rust foci, the sandpaper will be required - small and large. But it is not recommended to choose grain largest 120.
3. Rust converter - a chemical agent that allows you to quickly get rid of the problem, prevent its development.
4. Degreaser - necessary for high-quality application of substances.
5. Putty - contributes to the alignment of the plane, protects the metal.
6. Primer - Required for coating and base clutch.
7. Paint - creates an external protective coating.

To protect areas that will not be processed, use the greasy scotch, newspapers or cardboard. Clean fabric to clean the surface, degreasing.

To remove rust from metal car, you need to carefully prepare the car. Works start with washing, removal of contamination, drying. So, it is easier to inspect damaged places, reveal new foci, prevent the further development of processes. Even a barely noticeable stain, scratch strikes a large metal area, reducing strength indicators, durability.

The main stages of the fight against rust:

1. Inspect the body, paying attention to the arches, bottom, thresholds. It is impossible to leave scratches, chips, damage to the coating.
2. Identifying problem areas, proceed to stripping with the use of grinder, nozzles and sandpaper. It is important that deep scratches do not appear in the process of work. Performing work manually, from sandwich with large grain moving to small skirt.
3. Slipped places are degreased. Thinking out than to remove rust from a metal metal, you need to choose the means - converters eliminating the problem at the chemical level. After processing, corrosion is easily removed, the probability of distribution, the appearance of new foci is prevented.
4. Places strongly damaged rust are cleaned deep. Therefore, after the completion of the process, degreasing, putty is applied. Deep irregularities eliminate putty with fiberglass. For the final stage, the usual putty is selected.
5. Smooth, degreased plane is covered with anti-corrosion composition. If the processing of individual sections is assumed, the rest of the places are closed with cardboard, paper, film. Several layers are performed with a period of 15 minutes to dry.
6. The resulting layer matuto, using wet, fine sandpaper, and then degreased.

Surface coloring is the final stage that promotes the creation of a reliable protective layer. The paint is applied at a distance of up to 30 cm, several layers are performed. Next, varnish is applied. Processing individual sections, you can use a can with paint.

In the process of getting rid of corrosion it is important to find all the sources, the slightest stains, and completely remove the traces of foci. For this, they select special chemical compositions. Using them, use personal protective equipment.

After processing the compositions are removed, the surface is cleared. Choosing a remedy for rust on a metal metal, it is worth considering the options for manufacturers of autocostectors and folk techniques.

Popular converter reagents:

1. Orthophosphoric acid is a common and effective substance that can be included in various drugs.
2. ENV-1 neutralizer is a substance capable of neutralizing rust turning it into a gray mass. It is easily removed.
3. Zinc spray allows you to effectively deal with the foci, providing surface protection.

Thinking on how to get rid of rust on a car, you can pick up ready sets, including several substances - a degreaser, converter, protective composition.

1. The composition based on water with the addition of ammonium, caustic natra and formalin is prepared.
2. Another option involves the use of a solution of salt and sulfuric acid with the addition of the first mixture. Here, seeing an element for half an hour, it is easy to remove signs of rusting process.
3. Fish fat are applied to damaged areas. After 2 hours, the rust is easily removed. This option allows you to protect the car from rust. Fat penetrates deep into corrosion, which prevents the further defeat of the car.
4. A rag moistened in kerosene allows you to eliminate dotted rusting traces.
5. Mixing charcoal and machine oil, make a paste.

Eliminating the foci, it is impossible to slow up with further processing, otherwise new damage may form. It is necessary to think about how to close rust on the car body, especially when there is no possibility to carry out a subsequent painting. Here, after removal of the focus, it is applied with a thick lubricant in the form of wax, "Movil", which prevents moisture penetration and further destruction.