Motor and transmission oils for Kia Cerato. Motor and Transmission Oils for Kia Cerato Transmission Oil for Kia Cerato
KIA CERATO CD CD car has been produced since 2004 in a sedan, coupe and 5-door hatchback. Depending on the sales region, the model also has Spectra, Sephia, Forte and K3 names. Cerato divides the platform with Hyundai Elantra and is equipped with gasoline four-cylinder engines MPI and GDI with variable gas distribution phases (CVVT) with a volume of 1.6 - 2.0 liters and 128 - 201 hp and front-wheel drive. Previous versions of the model could also have 2.4 gasoline or 1.6 liter diesel engine. Currently, the third generation of Cerato is produced. Which oil to fill in the KIA Cerato engine depends on the year of the car.
Total Quartz 9000 HKS G-310 5W30
Motor oil for KIA Cerato Total Quartz 9000 HKS G-310 5W30 was developed in conjunction with automakers Kia and Hyundai and used at the first fill in KIA cars. This oil guarantees a high degree of engine protection against wear and harmful deposits in any operating conditions, including at sports riding, movement in start-stop mode and cold motor start. Thanks to oxidation resistance, it can be used with a maximum prescribed manufacturer oil replacement interval in Kia Cerato. Total Quartz 9000 HKS G-310 5W30 meets international ACEA A5 and API standards and is recommended for all gasoline Cerato 2 and 3 generations.
Total Quartz 9000 ENERGY 5W40
Total Quartz 9000 Energy 5W40 oil was created by synthetic technology and is universal, so it can be used in Kia Cerato any years of release regardless of the conditions of use of the car. This oil retains its protective properties in any temperature mode, both at elevated temperatures at intensive loads and during cold start in frosty weather. Due to the good oxidative stability, the oil for Kia Cerato Total Quartz 9000 Energy 5W40 practically does not lose its characteristics over time.
Transmission oil for Kia Cerato
In Kia Cerato cars, Total mechanical gear recommends using Total Transmission Dual 9 Fe 75W90 transmission oil. It differs from conventional lubricants with a reduced level of friction between the IPAM items, which provides improved energy efficiency and low fuel consumption, and, in addition, guarantees the protection of the box from wear and corrosion.
Total FluidMatic MV LV oil is suitable for 6-speed Kia Cerato automatic transmission, and Total Fluide XLD FE - for model cars with 4-speed transmissions. These fluids due to correctly selected friction characteristics guarantee reliable lubrication of transmission parts than protect the transmission from wear. In addition, they ensure the smooth switching and the maximum degree of torque transmission on the wheels, while maintaining high dynamic characteristics and comfort when driving.
KIA CERATO CD CD car has been produced since 2004 in a sedan, coupe and 5-door hatchback. Depending on the sales region, the model also has Spectra, Sephia, Forte and K3 names. Cerato divides the platform with Hyundai Elantra and is equipped with gasoline four-cylinder engines MPI and GDI with variable gas distribution phases (CVVT) with a volume of 1.6 - 2.0 liters and 128 - 201 hp and front-wheel drive. Previous versions of the model could also have 2.4 gasoline or 1.6 liter diesel engine. Currently, the third generation of Cerato is produced. Which oil to fill in the KIA Cerato engine depends on the year of the car.
Total Quartz 9000 HKS G-310 5W30
Motor oil for KIA Cerato Total Quartz 9000 HKS G-310 5W30 was developed in conjunction with automakers Kia and Hyundai and used at the first fill in KIA cars. This oil guarantees a high degree of engine protection against wear and harmful deposits in any operating conditions, including at sports riding, movement in start-stop mode and cold motor start. Thanks to oxidation resistance, it can be used with a maximum prescribed manufacturer oil replacement interval in Kia Cerato. Total Quartz 9000 HKS G-310 5W30 meets international ACEA A5 and API standards and is recommended for all gasoline Cerato 2 and 3 generations.
Total Quartz 9000 ENERGY 5W40
Total Quartz 9000 Energy 5W40 oil was created by synthetic technology and is universal, so it can be used in Kia Cerato any years of release regardless of the conditions of use of the car. This oil retains its protective properties in any temperature mode, both at elevated temperatures at intensive loads and during cold start in frosty weather. Due to the good oxidative stability, the oil for Kia Cerato Total Quartz 9000 Energy 5W40 practically does not lose its characteristics over time.
Transmission oil for Kia Cerato
In Kia Cerato cars, Total mechanical gear recommends using Total Transmission Dual 9 Fe 75W90 transmission oil. It differs from conventional lubricants with a reduced level of friction between the IPAM items, which provides improved energy efficiency and low fuel consumption, and, in addition, guarantees the protection of the box from wear and corrosion.
Total FluidMatic MV LV oil is suitable for 6-speed Kia Cerato automatic transmission, and Total Fluide XLD FE - for model cars with 4-speed transmissions. These fluids due to correctly selected friction characteristics guarantee reliable lubrication of transmission parts than protect the transmission from wear. In addition, they ensure the smooth switching and the maximum degree of torque transmission on the wheels, while maintaining high dynamic characteristics and comfort when driving.
Carrying out the selection of lubricants, it is necessary to take into account the requirements set out in the instruction manual. Particular attention should be paid to the recommended engine oil for KIA Cerato: the fill of inappropriate by the parameters of the car will bring irreparable harm to the motor.
Before buying lubricants, you need to familiarize yourself with the information set out in the manual to the car. It is worth paying attention to the following characteristics of the recommended engine oil for KIA Cerato:
- viscosity;
- class;
- tolerances
It is also necessary to take into account the basic base of oil for Kia Serato: synthetics, semi-synthetic, mineral water. The temperature behind the car plays an important role in the selection of lubricants. Depending on the season, motorists choose a car, designed for winter or for summer, or all-season cars.
Kia Cerato Koup TD 2009-2010 releases and Kia Cerato TD 2009-2010
Manufacturer Kia Cerato for 1,6L and 2,0L motors, recommended to pour motor lubricants having the following parameters:
- quality class by API - SL or SM;
- according to ILSAC - GF-3 and more.
The viscosity of the lubricant liquid depending on the temperature behind the car, you need to choose from Table 1.
Table 1 Temperature ranges, as well as recommended viscosity values \u200b\u200baccording to SAE standard.
* 1 - To achieve a smaller fuel consumption, you can apply an automatic with characteristics:
- according to APISL or SM;
- according to the ILSAC -GF-3 standard.
From Table 1, you should use, for example, a 5W-20 or 5W-30 car at a temperature of from-30 0 s (and less) to +50 0 s (or more) for gasoline engines. Or 20W-50 in the temperature range from -6 0 s to +50 0 s (or more). The remaining oils depending on the temperature mode are selected by a similar method.
Kia Cerato LD 2004-2009 release
Based on the machine manual, the bay should use lubricants with such parameters:
- 1,6L and 2,0l auto motors operating on gasoline:
- in accordance with the classification of API -SL or SM;
- according to ILSAC -GF-3 or more.
- Diesel power units:
- according to the API specification - CH-4 or higher;
- in accordance with the ACEA - B4 system or higher.
The viscosity of the oil is selected from Table 2, taking into account the temperature range at which the car will be operated.
Table 2. Temperature ranges and recommended viscosity values \u200b\u200baccording to SAE standard. * 1 - a decrease in the fuel mixture consumption promotes lubricant with characteristics:
- according to the classification of SAE 5W-20 or 5W-30;
- according to the classification of API -SL or SM;
- according to the ILSAC -GF-3 standard.
According to Table 2, for example, for diesel engines it is necessary to use 0W-30 at temperature conditions -30 0 C (or less) to +8 0 s, and the 5W-30 liquid is used in the temperature range from -25 0 s to +40 0 C. The remaining viscosity, depending on the temperature regime is calculated in the same way.
KIA Cerato Koup TD FL 2011-2013 releases, Kia Cerato TD FL 2011-2013 release
From the operating instructions for gasoline power units of 1,6L and 2.0L, you need to use lubricants that meet the requirements:
- quality class according to the API - SM, if the specified car is not available, then it is necessary to use liquid class SL;
- according to ILSAC - GF-4 and more.
According to the viscous parameters, the desired engine fluid must be selected from table 1.
Reduce the fuel consumption allows the machine with characteristics:
- according to the classification of SAE 5W-20;
- according to the API standard - SM;
- in accordance with ILSAC - GF-4.
Kia Cerato Koup YD 2013-2016 release of KIA Cerato YD FL 2017 release
According to the manual to the car, it is allowed to pour engine oils related to the requirements:
- Motors 2.0 MPI and 1.6 MPIs operating on gasoline:
- Automotive 1.6 T-GDI, operating on gasoline:
- according to the ACEA - A5 and higher specification.
- Diesel power units U II 1.6 VGT, equipped with a sump filter:
- in accordance with ACEA - C2 or C3, in the absence of ACEA C2 or C3, API - CH-4 is allowed.
- Diesel power units U II 1,6 VGT, not having a diesel filter:
- according to ACEA - B4, in the absence of ACEA B4, the CH-4 API is allowed.
Choose a viscosity vehicle depending on the temperature mode, can be from table 3.
Table 3. Temperature ranges, as well as recommended viscosity values \u200b\u200baccording to SAE standard * 1 - For economical consumption of fuel, it is better to pour the engine fluid:
- according to the classification of SAE 5W-20, except for the countries of the Middle East;
- 5W-30 for the countries of the Middle East.
* 2 - To the countries of the Middle East include Libya, Algeria, Morocco, Tunisia, Sudan, Egypt and Iran.
* 3 - Reduce the consumption of combustible mixture allows the machine
- according to the classification of SAE 5W-30;
- in accordance with ACEA - A5 or higher.
From Table 3, for example, for diesel engines you need to use SAE 15W-40 liquids at temperature conditions from-17 0 s to +50 0 s (or more). A grade 0W-30 motor lubricant in the temperature range from-30 0 s to +30 0 C. The viscosity of the car for other temperature modes is selected.
Kia Cerato YD 2013-2016 releases
From the manual it is worth pouring engine fluids that meet standards:
- Engine 2.0 MPI and 1,6 MPIs operating on gasoline:
- according to the classification of API - SM and higher, if the specified lubricant is not available, it is necessary to use the SL liquid;
- in accordance with the norms of ILSAC - GF-4 and above;
- according to ACEA - A5 and higher.
- Gasoline Automotive 1.6 T-GDI:
- according to the specifications of ACEA - C2, C3, A5 and higher.
Motor oil viscosity must be selected on table 4
Table 4. Recommended viscosity of liquids depending on the temperature conditions overboard the car. 1 - Save on the consumption of fuel allows the car 5W-20.
According to Table 4, for example, for the countries of Europe, it is recommended to cast an automation of 0W-40, 5W-20, 5W-30, 5W-40 at temperatures from -30 0 s (and less) to +50 0 s (or more). In the same temperature range, except for Europe, it is recommended to pour 5W-20 or 5W-30.
Conclusion
In the instructions for the machine indicated not only the recommended engine oil for KIA Cerato, the manufacturer also describes the optimal duration of the change of lubricant. Draws consumer attention to the possibility of using motor fluids with the designation of Energy Conserving Oil - energy-saving auto. Their use makes it possible to reduce fuel consumption by reducing the friction resistance inside the auto motor. At the same time, in the manual, it is described that to feel the benefits from energy-saving machines will not immediately succeed, real savings can be treated at the expense of the total economy of the combustible mixture for the use of such oil.
Many owners are interested in the answer to the question which oil to pour into the engine Kia Cerato? This car has been in considerable demand for Russian car enthusiasts for a long time. The simplicity of its design, reliability, and most importantly, the low price makes it an attractive purchase. This four-cylinder engine has 4 valves for each cylinder and injector fuel injection. In general, the power plants of this design and the Kia Cerato engine in particular are considered sufficiently reliable. Problems with them practically does not occur until 200-300 thousand kilometers of run. However, this is subject to proper and timely service. One of the key points of which the spectra's motor resource directly depends is the timely oil change. This procedure can extend the life of your car for many thousands of kilometers.
In addition to the correct periodicity of oil replacement, the service life of the engine is affected by its quality.
The working fluid that will protect the parts from premature wear must have certain qualities and comply with the standards that make it a car manufacturer.
So how often can change engine oil
You can find many expert answers to this question, but it is best to follow the recommendations that the manufacturer of the vehicle gives. He recommends changing Cerat's engine oil at least every 15 thousand kilometers or if the annual mileage is less, every year. It is with such a periodicity of replacement that the Motor KIA will be least susceptible to internal wear. It should be noted that sometimes this procedure is required more often. In some cases, the interval between replacements should be reduced to 10 thousand kilometers. It is always associated with heavy conditions of the car, for example, in urban conditions or dusty terrain.
If you buy a car from hand, then change the oil in the Cerato engine is needed immediately after the purchase to protect yourself from problems if the former owner did it for a long time or poured poor-quality liquid.
Together with the oil it is necessary to change the Caia Cerato oil filter. Therefore, you need to immediately purchase this item. The plus is the fact that prices for consumables for this car are low, as it should be in the budget class.
In the new Kia Cerato oil oil into the engine poured Total Quartz 9000 HKS G-310 5W30 or Total Quartz 9000 Energy 5W40. But such oil is used only during the routing process, its viscosity coefficient is SAE5W20. Liquid with this level of viscosity is not recommended for everyday use. 
Motor oil for KIA Cerato Total Quartz 9000 HKS G-310 5W30 was developed in conjunction with automakers Kia and Hyundai and used at the first fill in KIA cars. This oil guarantees a high degree of engine protection against wear and harmful deposits in any operating conditions, including at sports riding, movement in start-stop mode and cold motor start. Thanks to oxidation resistance, it can be used with a maximum prescribed manufacturer oil replacement interval in Kia Cerato. Total Quartz 9000 HKS G-310 5W30 meets international ACEA A5 and API standards and is recommended for all gasoline Cerato 2 and 3 generations. 
Total Quartz 9000 Energy 5W40 oil was created by synthetic technology and is universal, so it can be used in Kia Cerato any years of release regardless of the conditions of use of the car. This oil retains its protective properties in any temperature mode, both at elevated temperatures at intensive loads and during cold start in frosty weather. Due to the good oxidative stability, the oil for Kia Cerato Total Quartz 9000 Energy 5W40 practically does not lose its characteristics over time.
Manufacturer of cars of this brand releases engine oil under its Hyundai / Kia trademark. 
Depending on the temperature conditions in which the car is used, as well as the level of wear of the motor, the necessary level of viscosity of the engine oil should be observed.
Select the oil producer for Cerato
In order to choose high-quality oil into the Kia Cerato engine, you need to pay attention to his brand. This indicator sometimes worries auto owners no less viscosity and other labeling. There is a huge number of brands of motor oils of different manufacturers. Sometimes there are frankly low-quality liquids among them.
To protect yourself from the purchase of fakes, it should be purchased in good auto shops and make a choice in favor of famous brands with a good reputation. 
To such brands now include:
- Motul.
- Mobil.
- Shell.
- Castrol
This list is not limited to the number of brands producing a quality product, however, it is they who have gained the greatest confidence from buyers.
If we talk about the types of engine oil, synthetic uses the greatest demand. It is he who is considered the most suitable for engines, as it has the necessary characteristics, effectively protects the details from wear and has a long service life. Mineral fluid can also be used, but it is inferior to synthetics and semi-synthetic. At the same time, its price is lower.
Thus, choosing oil into the Kia Cerato engine, pay attention to its labeling, the level of viscosity, the manufacturer. Be sure to follow the periodicity of the replacement proposed by the manufacturer. It is the combination of these factors that will provide the motor of your car a long and trouble-free service life.
