The regular size of the Mazda disks 3. On the breakdown and sizes of the wheels for the Mazda (Mazda). Parameters of other models

The "Mazda" breakdown 3 2008 is a relatively common parameter. This is due to the fact that most of the Japanese and Korean automakers set the same dimensions and parameters of the disks and tires for a simpler selection. The size of the MAZDA 3 BK wheels is provided by the manufacturer from relatively small, such as R15, to huge R18. Correctly select the wheel kit on this car, you can drastically change the appearance and achieve a good level of manageability and smoothness.

Each car owner thought about improving his car with tuning or replace the original parts and components to more attractive or modern. The main thing that is responsible for the exterior is discs and tires. From the size and color of the wheeled disks, as well as the method of manufacture depends not only by the exterior of the vehicle, but also driving qualities. Auto with large wheels looks much more attractive than similar with the original.

The size of the wheels "Mazda" 3, Tires "Pirelli" R16

Improve the attractiveness of the machine is a good desire, but not the main one. The main thing is that tuning does not reduce the efficiency of work.

In addition to the attractiveness, the selected products must match the parameters of the wheels of the Mazda wheels 3, as well as the installed factory sizes of disks and tires. The inconsistency of these parameters leads to incorrect and unsafe operation of the vehicle.

At best, not guessing with the razorovka wheeled disks "Mazda" 3, products simply will not fit. However, the use of transition rings allows you to install even inappropriate wheels. In this case, the movement will be permanent risk.

It is necessary to carefully approach the selection of tires for the car, since incorrectly selected dimensions lead to the fact that the rubber will not be installed on the disk.

The breakdown and the drilling is the same parameter. Mazda 3, like any other car, is indicated as PCD. For the highest explanation, such an explanation is used: the drilling is the number of bolts and the diameter of the circle on which the holes intended for them are drilled.

Most of the car enthusiasts do not pay attention to these data, in connection with which it is difficult to have difficulty choosing and buying new products, which happens when wearing older or changing the time of the year. If you know this data during the selection, then with complete confidence you can say that the wheel will be installed.

The most difficult moment is that the person can only determine the number of bolts for fastening. As for the diameter, on which the holes are located under them, it is much more difficult to measure it.

Incorrectly chosen tires for Mazda 3 - a huge threat to the safety of the driver and passengers. At best, poor-quality tires will affect negatively at the wear level of parts and nodes of the chassis, and in the worst can lead to an accident.

Table

Special tables were created for simpler and correct selection of the drilling parameter for machines. Different generations of cars can have different parameters and permissible dimensions. However, Mazda 3 in all generations had the same data, which differed only with the size of the wheels.

Note!

Due to the fact that the manufacturer has accurate permissible dimensions for the components installed, then it is important to observe them for normal operation of the machine.

The parameters for the drilling, departure and diameter of the central opening must be observed exactly. It is possible to allow only a slight fluctuation in the size of the rim departure to ten millimeters in one direction or another.

This link allows you to find the trolling tables on all brands of cars. By selecting the desired machine model, for example, Mazda 3, and the year of its release, you can define all the desired dimensions.

The data provided on the Internet does not always correspond to the factory.

Mazda 3 - Tire size and disks

For all the time of release of this car, some of its parameters and dimensions changed. However, knowing the basic requirements, you can determine and select the necessary set of wheels for any year of the vehicle.

To do this, you need to know what the difference between the main parameters is:

• The diameter of the rim, which is measured in inches;
• The rim width is also in an inch system. Most often for the "Troika" it is equal to 6.5;
• Departure, measured in millimeters. This is the distance from the vertical axis of symmetry to the closure plane of the hub and disk;
• The number of holes for fastening with nuts and bolts, or just a break;
• Hub hole and its size. Marking as DIA and is the diameter of the central opening. Measured in millimeters.

Note!

Knowing all the listed parameters, the error in the selection of the disc set is excluded.

Permissible tire sizes for Mazda 3:

• 195/65 R15;
• 205/55 R16;
• 205/50;
• 215/45;
• 225/45 R17;
• 215/45;
• 225/40;
• 215/40 R18.

On a note.

As for the dimension of the wheelbar, it is necessary to disassemble the standard for the machine - R16: 6,5x16 5x114.3 67.1 ET50. This applies to the model that has been produced since 2008.

The most important parameters here are the landing dimensions that are indicated as 5x114.3. When choosing a set of products on Mazda, it is necessary to be guided only by these parameters, others simply do not fit.

It is worth paying attention to the width of the wheel disc, which is 6.5 in this case.

Choosing a larger size, it should be borne in mind that the discs may simply not fit in the arch. The departure parameter, which is indicated by ET50, can fluctuate for five points in a plus or minus. Otherwise, the negative impact on the controllability and increased load on the nodes of the chassis.

Qualitatively, consider all the listed parameters, you can choose wheels on Mazda 3 without loss of running characteristics. In this case, they will be perfectly standing, and will also fully match the characteristics of the factory settings of the machine.

An important point is the right choice of winter rubber on Mazda 3. It is recommended to choose tires with a minimally allowable width and diameter. The ideal will be the operation of the tires in size 195/65 R15.

Proper selection of diameter

Mazda 3 allows you to install discs and tires of various sizes: from R15 to R18. Choosing the smallest diameter, you can get a good smoothness of the course with minimal wear of nodes and suspension units. Handling of such a car will not allow to participate in races, but this is not required for daily movement in the city. Suitable for use in any weather with disks of various quality.

On a note.

When installing large wheel sizes, it is necessary to prepare for the minimum move of the suspension levers and shock absorbers. The smoothness of the stroke will become a sports. On large pits and thighs it will be felt as much as possible. However, such a tire size will give the machine better handling.

An important point is that with an increase in the disk radius, it is necessary to reduce the height of the tire profile. This is done so that the product during the movement does not hurt the elements of the wheel arch.

Parameters of other models

Some other manufacturer models may differ in the size and characteristics of rubber and disks. They depend on the total mass of the vehicle, class and power. For example, a small "Mazda" 2 is characterized in that it has only 4 holes for mounting with a diameter of their location of 100 millimeters. The large sedan "Mazda" 6 is distinguished by increased discs and tires and has an identical drilling of 5x114.3.

As for the Mazda 2 car, it was equipped with wheels from R14 to R16. The drilling is of all products - 4x100, the diameter of the central opening - Tso 54.1.

The size of the departure and width may differ:

• R14 - 6.0J PCD 4 × 100 ET 45, also some modifications had a width of 5.5. Tires - 175/65 R14;
• R15 - 6.0J PCD 4 × 100 ET 45, Tires - 185/55 R15;
• R16 - 6.5J PCD 4 × 100 ET 45, Tires - 195/45 R16.

For Mazda 6 in the second generation, the wheels were provided from R16 to R18 with tire sizes: 205/60 R16, 215/50 R17 and 225/45 R18.

Disc parameters:

• The drill, standard for Japanese manufacturers - 5 × 114.3,
• Rim width - 6.0, 7.0 and 7.5 j, measured in inches;
• Departure - ET50-60, measured in millimeters;
• The diameter of the central opening for the hub - D 67.1 millimeters.

The Popular Car Mazda 3 has a common drill option. Thanks to this, you can easily choose any wheels on it.

The correctly selected wheel kit will change the appearance of your car and give originality. When replacing the original wheels, it is necessary to consider the specifications recommended by the manufacturer and applied by disk manufacturers. The main parameter is the smear of Mazda 3.

Mazda Disk Parameters 3 different generations

• Diameter disk in inches.
• Disc width in inches. In the designation of the disk it looks like this: 6,5JX15, where 6.5 is the value of the width, and 15 is the diameter of the disk in inches.
• Departure disk in millimeters. It determines the distance between the vertical axis of the disk symmetry and the plane of the contact of the disk to the hub. It is indicated by ET 55, where the value of the departure is 55 mm.
• The number of mounting holes for bolts or nuts, which are attached to the disk to the hub and the diameter of the PCD in mm, on which these fasteners are located. In the disc marking looks like this: 5x114.3 - this is a breakdown.
• The diameter of the hole under the hub (DIA) is the diameter of the central opening of the disk in mm.

If you choose discs for Mazda 3 and BL, note that the breakdown and other parameters of the disks are identical. The only difference is that in Mazda 3 of the second generation, the wheel arches are slightly wider, therefore it is possible to install disks of 8 inches width and departure of 45 mm.

Factory equipment Mazda 3 BK (2003-2008):

• R16 (6.5x16 ET52.5);
• R17 (6.5x17 ET52.5);
• R18 (7x18 ET52.5).

• R16 (6.5x16 ET50);
• R17 (7x17 ET52.5);
• R18 (7.5x18 ET52.5).

Standard Mazda 3 BM (2014-:

• R16 (6.5x16 ET50);
• R18 (7x18 ET50).

Parameters of planting holes

Do not confuse, breaks and drilling - this is the same. In the labeling of disks and technical descriptions, the designation is the PCD - the landing diameter. Mazda 3 has the same breaking on all generations of the car until today, only 3 differs in some models.

PCD: 5 × 114.3. This marking is read like this: the disk is attached to the hub with five nuts, located around the circle with a diameter of 114.3 millimeters. Nut 12 × 1.5 mm.

Dia: 67.1 mm - the diameter of the central opening of the disc.

There are situations where you have an unknown disk without labeling and you need to somehow find out the value of the breakdown of this discs. It seems difficult, but everything is much easier. Consider a simple method.

The quantity of fasteners can be defined by a simple counting of the holes. So, in Mazda 3 their five pieces.

To determine the diameter of the circle, you need to measure the distance between the extreme inner walls of the mounting holes, and then to this value add the diameter of the hole itself to this value.

So, having calculated the amount of fastenings of the Mazda disk 3 and determining the diameter of the circumference of their location, we obtain the desired value of the breakdown - 5 × 114.3.

Possible analogues and installation of other sizes

You can buy exclusive discs for Mazda 3 with the same characteristics as the factory wheels. Or you can go along the way of tuning, putting the wheels more, wider and with a smaller departure to give a car really original appearance. If the departure is less than standard, for example, 40 in front and 45 rear, you need to install spacers for 15 mM Mazda disks 3. The prerequisite for the presence of protrusions under the central hole, so that the load with the studs on the hub bearing decreases, and the wheels are normally centered.

The possibility of replacing the factory disks Mazda 3 exists almost always. The main thing is that it does not arise big problems when driving. Of course, wider wheels mean wider tires that contribute to more energetic driving style. Subtleties in detail, and the choice remains yours!

It is worth noting that the breakdown and the drilling is the same. The technical documentation uses another designation - PCD, planting size. Mazda 3 has the same tarvering from the first generation to the last to date - 5 × 114.3, only the size of the tire differs in some models (see table). Such a drill is read like this: the disc is fixed by bolts 5 pcs. Located along the circle, the diameter of which is 114.3 millimeters.

Original Disk Mazda 3, I Generation, Body Body

Mazda breakdown 3 2003 - 2013 GV, BK and BL, I and I generation bodies

The dimension of the wheels for the first and second generation Mazda 3 is identical. It is only distinguished by the fact that in the second body (Bl) the arches a little more and there is an opportunity to install wheels with a width of 8 and departure 35. The regular size of the disk is 16 and 17 inches, diameter 6.5.

Tools and size of tires Mazda 3 2013 - and to present (\u003e 2017), BM, III generation

Standard disk diameter for Mazda 3 sedan and hatchback 2013-2017 GV And further - 16, 18 inches depends on the configuration. Tires: 205/60R16 and 215 / 45R18.

Air pressure on tires on Mazda 3

For tires R16 recommended tire pressure when loading up to 3 people: Front and rear tires - 2.5 bar; With full load: Before - 2.8 bar, the back is 3.2 bar. For larger tire size, R18, and with load up to 3 people, the recommended pressure is 2.4 bar before and 2.3 rear tires; With full load - 2, 8 and 3.0 bar, respectively. Data taken from the documentation MAZDA 3 (III generation).

How to determine the breakdown

There are situations where you need to determine the values \u200b\u200bof the breaks of a particular disc. It may be needed when you are unknown discs, the drillings of which must be installed. You will think that it is difficult, but no. There is a method that can be called simple. So, begin.

1. The number of bolts can be determined by a simple counting of the holes. For example, in Mazda 3 of their five.
2. To determine the diameter, you need to measure the distance between the extreme internal walls of the mounting holes, after which it is added to this value to add the diameter of the hole itself.

For example, having calculated the number of Mazda's disc bolts and determining the diameter, we get the following value - 5 × 114.3.