Body polishing technology from scratches with their own hands

Any motorist knows that its vehicle is not contained in greenhouse conditions, and therefore is subject to negative impact of harmful environmental factors. During the operation of the machine on its paint coating, small cracks, chips and scratches are inevitably formed. As a result, the car loses a presentable look. And what is the most unpleasant - body damage can lead to corrosion development. To prevent this, it is necessary to polish the machine in a timely manner.

To successfully perform polishing the body of the car from scratches with your own hands, you should take care of creating optimal conditions for work.

• the surface of the machine must be absolutely clean and dry;
• it is necessary to carry out polishing in the closed placed room with good ventilation and lack of dust;
• it makes sense to take care of high-quality artificial lighting. To achieve the best result, you should see the surface of the car from all angles.

Before conducting the procedure, it will be necessary to remove all dents, and on impressive scratches and chips to apply special scotch. If a deep polishing scratch is planned, damage is processed separately.

Important! It is impossible to make polishing under the right sunlight, since the polyrolol dries at them instantly dries, and this leads to stains and divorces.

Only following the above-mentioned rules, you can polish your iron horse no worse than in car dealerships, and at the same time significant win financially.

Scratches before polishing

Choosing a car body

Before making the purchase of specialized compositions, you need to estimate the overall condition of the surface of the car and the degree of damage. If there are no visually distinguishable defects, but sweat the color and loses the shine, the simple protective polyrolol will cope with the problem.

If there is a network of minor scratches on the body, well distinguishable on a clean car in a dwelling day, it is recommended to purchase two varieties of polyroli - with abrasive particles and the composition at a low content of abrasive elements. Funds of the first composition are able to clean the layer of varnish from the depth of scratches. It should be taken into account the expression of damage. With deep cracks it is necessary to buy high-abrasive pastes.

Please note that the means with rigid particles intensively remove the layer of varnish and make the surface more vulnerable. Therefore, after their use, do not do without applying a protective composition.

In addition to the composition of the polyterol, it is possible to classify according to parameters such as the cost, scope and consistency:

• pasty polyroli - They have dense consistency and are suitable for polishing scratches on any parts of the car body. The price of such funds is quite high, but pastes are enriched with elements responsible for color saturation;
• liquid polyroli - They are used mainly to process the hood, roofs and trunk cars, as they spread over vertical surfaces. However, they can be carefully and for a long time to polish the car, without fear to erase the paintwork to the soil;
• aerosol passwords - Convenient in applying, easy to use. But the presence in the cylinder components for effective sputtering contains a very small amount of polishing materials.

Polishing scratches on the car body is carried out using the selected tools and can be carried out both manually and with a polishing machine or drill. It depends on the degree of severity of flaws on the surface of the machine.

Stages of simple car body polishing

Simple polishing of the surface of the machine can also be called preventive. Carrying about their iron horse will perform her 1 time in 3-4 months. Such a procedure eliminates the car from small damage and gives impeccable shine. The process itself is absolutely not complicated and does not take much time and effort.

The required amount of the polyterol should be applied to a soft rag without a pile and evenly distribute it. (If an aerosol is used, then it must be applied directly to the surface of the car). The composition on the fabric should dry up to the state of white climb - then they can already be effectively polished. Next, the body is processed by smooth circular motions before the appearance of intensive shine.

Stages of deep polishing of the car body

In order to get rid of essential scratches on the car body, a deep polishing method is used. It is necessary to have certain skills and army knowledge of the procedure to obtain a really high-quality result. In addition, the process takes a long time, but changing the appearance of the car is far to the better one worth it.

First you need to prepare tools for deep (abrasive) polishing:

1. Pastes of various types are abrasive, disapprosive and with an average content of abrasive particles.
2. Polishing machine.
3. Polishing circles.
4. Emery paper P2000 and P2500.
5. Soft scraper from rubber.
6. Any soft rag without a pile.
7. Water in the pulverizer.

Abrasive polishing the surface of the car should be carried out in stages:

• cut the sandpaper into small pieces and soak in water for softness;
• wipe the sandpaper with scratches, with the help of a scraper and water, removing the cleaned particles from the surface;
• square the water-processed area and attach a polishing machine with the most rigid circle (white). Before turning on the equipment to apply and evenly distribute high-abrasive composition;
• after polishing all the sections, wash the car with the car shutup.

Wing before and after polishing

Machine for grinding must be selected by taking into account the possibility without difficulty regulating turnover. It should begin to start the car from the lowest revolutions of the machine - 900 per minute, then the speed should be increased to 2000 rpm. / Min.

Then the same part of the body is polished again, but already with the use of a bezabrasive composition and with a softer circle on a polishing machine.

Important! In the process of polishing, in no case should not be very pressured on the machine - this can lead to a sparrel of paintwork.

The work process should pass smoothly and calmly, without excessive fuss and hurry. Special caution must be observed in the processing of Röbebe and the corners of the body. After polling the site, it is necessary to thoroughly wipe it with a wet napkin, estimate the result of the work and only then begin to other sites. Thus, the entire body is gradually polished.

The polishing machine is completely without effort moving along the surface of the car, while there is enough paste and water on the disk. In case of overheating, it is necessary to turn off the equipment, give it to cool and only then apply water and work further.

After washing the car with a car supersamp, it is necessary to dry it and then apply a protective polishing composition that does not contain abrasive particles. But the wax is also suitable. It is allowed to just drip on the body and light movement to distribute without rubbing. After dried up, you need to remove the wax surplus with a soft napkin or cloth.

Competently spent deep polishing scratches on the body of the car guarantees the return machine of a practical new appearance and gives the second, if not even the third lives with paintwork on the surface.