VAZ 2110: replacement of inner grenades in proven way

During the movement of the car, the noise in the grenade can be a sign of its damage. With the slightest presence of non-standard noise in this mechanism, it must be carried out on the VAZ 2110 replacement of the inner grenade.
This part is very important, since wear details, their breakdown can cause an emergency. If the need to buy a new grenade does not please the motorist in the prospect of waste of cash, the grenade can not be replaced.
To eliminate noise, sometimes it is enough to change the left and right item in places. In any case, the replacement of the inner grenade on the VAZ 2110 can be carried out on its own.

Replacing grenades

The reason for this noise is the appearance in a metal basis of a small deepening. Located inside the grenade, the ball, begins to move freely at this deepening.
Due to the constant movements of the grenade, this deepening often remains on the other side of the mechanism, and noise ceases to appear, and the car can please their owner for some time. The only black spot with such a coincidence will be a ride back.
With this vehicle movement, the noise will appear again and again. There are several standard ways to replace the car part of the VAZ 2110.
One of the options for repair is to replace the inner grenade with a complete dismantling of the car drive. The next way to remove garnet from the car is the one that implies the presence of a drive on the hub (see).
At the same time only pomegranate is dismantled. This method is time consuming, but the moments occur when the nut is not deleted, and its damage is not acceptable.
In this case, the second method is much more practical.
The main difference of the first method is the convenience that is absent in the second example. All works, when using the second method, are carried out under the car, which is extremely uncomfortable for the person performing repairs at home.

The first replacement method of Sls

So, with the first embodiment of the inner garnet of the car brand VAZ model 2110, the following steps must be made:

• Removed from the car drive with grenades.
• The clamp is dismantled, located on the protein (see).
• Removes the locking ring, which holds the separator of the inner grenade.

Note: This work is easily performed using a flat tip screwdriver.

• The drive is removed from the grenade along with the separator. Using the hammer, neat blows are disconnected from the drive.

• The removal of an old anther is carried out. The drive is cleaned and sounds dry with a dry cloth.
• A new, working mechanism is installed on the place of the old anther.
• When purchasing a new grenade in the store, a small locking ring is also sold.

Note: Its installation must be taken carefully. One edge is inserted into the recess, and the second edge is mounted in the groove.
This work is carried out in this way that the ring during the work did not determine. Otherwise, the garnet installation may be complicated.

• The trial is installed on the half. It must be set in the correct manner, as you can easily confuse it.
  It has a special recess. This recess must come into contact with a thick locking ring.
  In case of incorrect installation, you can get a lot of trouble that will be resolved problematic.

• To install the separator to the previous place, it is necessary to produce a series of non-links with a hammer. At this point, you need to follow the rules of strikes.
  They cannot be carried out on wheels. With a high-quality installation of a new locking ring, this process will not be long and painstaking.
• The inner pomegranate is completely filled with the screen.
• The separator is mounted in a grenade. A stop ring in the inner grenade is inserted.
• Mounted boot on a grenade.
• Clamp on anthers is given to the previous position.

The process of replacing the internal grenade of the car VAZ 2110 is over. Mounted drive in.
The process is not difficult, the pomegranate is easily mounted in the same position with a small push. When replacing the grenades, it is necessary to produce and replace the gland.
In the case of untimely replacement of the cuff, oil leak will begin.

Note. On the spare parts market there are two pomegranate options. The first has a ball base, the second is called a three-link.
If you have a choice, you should choose the last option. Such a pomegranate will necessarily have a positive impact on the course of the car and its dynamism.

The cost of the garnet may vary in various parameters. It should be paid attention to products that are sold in specialized stores.
Do not buy a detail that was used earlier. It is better to overpay and ride without feasible than to buy a broken part and drive a hundred meters to the nearest repair workshop.
In the process, do it yourself, it is advisable to view a detailed video and explore the photos - materials. The instruction should be carefully analyzed and understood.
Only after that you need to start the process of self-replacement, which makes it possible to save well in our days, when the price for repairs in the auto repair shop is quite high.