Technology replacing the drive of auxiliary units on Lada Kalina. Adjusting the tension of the Lada Lada Lada Calina Belt Generator Belt on 8 Valve Kalina

the main / PDD online

The generator belt, which drives the generator in the car Lada Kalina, is one of the most important consumables. From its correct work depends the stability of the power to the electrical energy of all current applicants in the onboard network. Therefore, many are interested in how to pull the belt.

The weakening of the degree of belt tension is accompanied by a whistling effect. And then whistles the belt. Also, the incorrectly produced stretch can cause rapid bearing wear and lead to the destruction of the structure of the expenditure element itself. In this article we will tell how to pull the belt.

The main features of belt wear include:

the appearance of cracks;
uneven abrasion of the working area;
gusting the threads of cords.

To prevent premature wear of this important expenditure component, the owner of Lada Kalina will require knowledge in terms of the correct belt tension.

How to diagnose an item?

If the above-mentioned sign of the loosening of the belt showed itself in "all of its glory", then the owner of Lada Kalina will be required without delay to check and, if necessary, perform a strap stretch. It is easy to implement it.

We click on the branch of the belt with a strengthening of the fingers and the line measure the magnitude of the deflection.
When the amplitude of the deflection exceeded 1 cm, the generator belt needs a suspender.
If the most accurate measurement result is required, then we recommend using a dynamometer. With it, it is necessary to pull the belt branch, making an effort of 10 kgf. Now we measure the deviation in the same way. Its value should not exceed 15 mm.

Preparation in work

Before the direct belt suspension, a series of preparatory manipulations will be required.

Clean the surfaces of the LADA Kalina Lada Kalina. For this, a conventional metal brush is suitable.
Match the specified nuts with a penetrating agent, such as WD-40, to provide easy unscrewing.
Stock needed by a set of tools - keys whose dimension is "8" and "19".

Remember the importance of the procedure of the timely belt suspender, because with a weakened transmission, the generator efficiency is significantly reduced, and the onboard network suffers from stress interruptions.

How to pull?

Let us turn to the consideration of the teller procedure. For the fulfillment of the entire complex of manipulations, the promotional owner will spend less than 15 minutes and the generator belt will be in operation again. It eliminates the need to visit the service for the purpose of devastating your own wallet.

Procedure:

We detect the stretch bar.
We unscrew the locknut on it. Some "crafts" here can interfere with a washing liquid tank. Remove it temporarily.
Casting for a tensioner bolt, rotate it until the desired level of belt tension level occurs.
At the end, tighten the lock nut at the result.
We check the level of tension and, if it is normal, congratulations on the successful implementation of an important mission, if the element is not pulled enough, the tension adjustment is performed additionally. The check itself is as follows. Turning on the ignition, we look forward to the instrument panel, where the indicator tracking charging the battery should be lit. Launch the engine Lada Kalina. If within a few seconds this indicator goes out, then everything is normal.

Let's summarize

As we have convinced, adjusting the tension of the belt transmission in Lada Kalina can be even an inexplicable owner of the car. The main thing is to remember the timely and periodic verification of the state of this element. If it is neglected, then you can personally provoke more expensive in terms of breaking the breakdown. Perform the stretch correctly by relying aspects given in this material, and then the generator belt serves you for a long time. At the first signs of belt wear, take measures to replace it. Operation of the worn component is fraught with a sudden break.

Replacing a belt generator On Kalina

The correct operation of the generator itself and the entire car electrical system depends on the generator belt. Replacing the generator belt on Hyundai Solaris. Replacing the timing belt N-150 8 CL weaken the key on the 13-top bolt of the generator fastening. If the belt was worn or a very provisit is dangerous that the generator will not produce current and the battery will rapidly discharge. Replacing the generator drive belt and the lower fastening of the generator (see photo 7 and 8). Turn the car will be very problematic. Replacing the tension roller and the 4zz-Fe generator belt. Replacing the Lada Kalina 8 CL generator belt: size. It will refuse the entire electrical system.

Find, whether it is necessary to change the belt, it is difficult enough, but some signs can specify this:

with the head of the engine, the light headlights becomes weak, merchant;
outsided noise, whistling with a car factory.;
after running 30 - 50 thousand. On Kalina it is worth checking the help of the belt. It can have cracks, "layers" of teeth, cuts, grinding or bundle of rubber, which can lead to belt cliff. In this case, it is better to replace it.

Choice belt and its price

If design generator It has a tensioner, the length of the belt is 883mm. Replacing the Lada Kalina Lada Lada Kalina (16 CL). Replacing the roller of the tensioner of the generator belt and gur. 4 stages of replacing the timing belt Kalina 8 valves. Hello, the readers of the blog rtiivaz.ru. Today we will consider how the belt is replaced today. Timing Valina with 8 valve engine. This is overwhelmingly in most cases on Kalina 8 valves. Replacing the Lada Lada Generator Belt 8 Valves: If the generator is like a grant, length is 823mm.

Replacing belt Generator Kalina

Replacing a belt generator Kalina. The easiest and fastest way. Belt can be replaced within 5 minutes

Replacing belt Generator Lada Kalina

Today 01. 12. 2015, replaced this belt On the generator for a new, mileage 60000.

Replacement

How to quickly change the generator belt on Kalina:

You don't need to regulate it about the elastic belt - it is not necessary to regulate it, it will start on the pulley, and then on the generator, the transfer and push the car, pre-slipped under the belt, the installation or similar to it.

I think that many car owners met with such a problem when the leather belt whistles. This arises because of the weakening of the tensioner, especially clearly revealed in crude weather, when a very pleasant whistle appears from under the hood. The stretch is performed quite simply and does not take much time, and the tool takes quite a bit:

The key on 8 cape or root, or the head with a ratchet - also completely comes
The key is 19.

Adjusting the generator belt on Kalina

The first thing that we will need to do is to loosen the tensioner rod nut, slightly revealing it counterclockwise:

And then unscrew the rod of the tensioner, and thus the belt will stretch. In order not to apply a lot of effort during tension, it is necessary to press the tensioner with a hand on the tensioner housing and at this time unscrewed, as shown in the photo below:

After tightened the belt, tighten the utilum nut and check whether there are more whistles at the engine running. To make sure that it is necessary to include as many electrical appliances as possible: Far Light, the oven for high speed, rear heating of glass, etc. If the belt does not whistle after doing this procedure, it means it is tight normally.

But it should also be borne in mind that the hauling will also not benefit the device. First, the belt itself will be strongly exhausted. Secondly, the bearing will not withstand a large load, threw and can even be jammed for a fairly short period of time. Once on the last car there was a sad experience, too much pulled him and after a week ride the bearing went under the replacement. So do not overdo it when performing this type of service with your viburnum.

If you need to relax on the contrary, you will need to twist the rod clockwise. After that, tighten the battery nut. It seems to be all the recommendations that you need to know when performing this simple procedure. If there are questions or there are comments on the material prepared by me, unsubscribe in the comments.

It is more convenient to perform work on the observation ditch or the overpass.

In order to improve visual control, we remove the plastic engine of the engine. To check the belt state, we turn on the fifth gear in the manual transmission, push the car (or rotate the wolf wheel) and inspect the belt over the entire length. By car with an automatic transmission, we remove the right mud shield of the engine compartment and rotating the crankshaft per bolt pulley drive auxiliary units, check the belt state.

With any of the gearboxes, the following method is possible: chalk applied labels to the belt section and, including the starter for short periods of time, we turn the crankshaft into small angles. We inspect the belt over the entire length, controlling the travelers through the label.

There should be no cracks on the belt, breaks and dedication of rubber from the tissue base. The defective belt must be replaced. For this, from the motor compartment ...

So far, we have shown operations that will allow, if necessary, change the tension of the drive belt of the auxiliary aggregates. But to replace the belt we will have to dismantle the right support of the power unit, as it passes through the belt.

Remove the middle and right mud shields of the engine compartment. How to do this, you can see in the article "Replacing the Lada Granta coolant". Next, we should remove the liner of the right front wheel or, having freed all the fastenings of the hider in the front and middle part of it, bend the liner for the brake disc wheel.

We hang and remove the right front wheel and release the mounting of the hump according to the scheme.

We install the engine controlled crankcase adjustable in the height so that it takes on the weight of the engine.

So, we weakened the tension of the drive belt of the auxiliary aggregates and now we can ...

The new belt is installed in the reverse order, providing the desired belt tension to the rotation of the tensioning device's running screw.

The belt is deflection on the plot between the motor pulleys and the air conditioner compressor with an applied force 100 H (10 kgf) should be within 6-7 mm.

Attention! Do not drag the belt. Excessive belt tension leads to premature belt wear and generator bearings.

At the same time, note that ...

11.06.2018

The generator belt at Lada Kalina plays an important role in the engine. Without it, the generator will not be activated that in turn is fraught with no charging battery. If there is no charging of the battery, then the car can not be started.

Generator belt replacement: phased instruction

First of all, to replace the 8-valve LADA LADA belt, a tool will be needed: a horn key to 19, wrench - by 10, and on the 8th. Now you can go directly to the replacement process:

Tension moment should be strictly observed. Too small tension will not give normal revolutions to the generator, which will lead to a voltage drop in the on-board network. Too strong - will lead to "subdings" or belt rupture.

Russian know-how, ordinary market weights guarding the force of the generator belt

Experts recommend changing the generator belt on the 8-valve Kalina every 25 thousand km, but AvtoVAZ is every 30,000 km. But, it should be borne in mind that you need to check the state of the belt constantly. Since the output can occur in 10,000 km.

Gates belt - Mileage of 40,000 km, prescribed Pipes, nothing critical, but it is better to replace

Replacing this element is not limited to a temporary framework, but is determined by the state of the generator belt. If you are examined continuously, you can prevent a break and obtaining other negative consequences. At the same time, motorists recommend carrying a spare belt with them so that at any moment you can change and go further.

Belt selection, catalog number, price

Each belt in the car has its own service life and resource, accordingly requires periodic replacement. So what is the generator belt need to be installed on the 8-valve Lada Kalina and how is it done?

Original number and belt size:

It should be borne in mind that the replacement of the generator belt is also a tensioner roller that is worn with it. When the replacement process is performed, it also needs to be replaced.

When choosing a belt and roller, there is a difficult task in front of the motorist: the original or analogue. Both those and others are good. But, what, if you do if you have a belt with you when buying in the store?

Articles of the generator belt on Kalina

Generator belt analog table on 8-valve Lada Kalina

All the analogs of the belt showed themselves quite well and won the confidence of motorists.

Generator Belt Roller Analog Table on 8-valve Lada Kalina

Definition of malfunction and replacement time

Define the malfunction of the generator belt is quite simple. Consider the main indicators:

All of these faults suggest that it is time to replace the generator belt on Kalina. Otherwise, he can break at the most inopportune moment.

Torn strap on one of Kalin

Video about the adjustment of the generator belt after it is replaced

A small video about the correct adjustment of the generator belt on Lada Kalina.

conclusions

Replacing the belt and roller of the generator on the 8-valve Lada Kalina is very easy and simple. A wide range of product selection will find a consumer not every taste. At the same time, even the analogues of the original parts are quite high quality. Diagnosis of faults is carried out easily and under the power of any motorist.

Can disturb the extraneous whistle. In the essence of the breakdown, it turns out that the cause is the generator belt. You can try to solve this problem yourself, but you can visit and auto service.

In any case, whatever the solution to this problem you choose, it is still worth familiar with the generator belt device. In independence from the brand of the car, there is a generator in each unit. The transmission of rotation from the crankshaft to the generator shaft occurs with the help of a belt that often becomes a cause of breakdowns or violation of the car. In order to accurately determine what the reason lies in the belt, you need to know first of all what it represents.

Meet the car generator belt

Drivers who are not the first year to drive a car, were convinced of the personal experience that before leaving you need to make a small technical inspection of special control zones. These include: technical fluids, fuel and lubricants, glands and anthers, as well as the generator belt.

As noted above, the generator belt is at the moment the only method of transmitting the rotation of the crankshaft to the generator is at the expense of which the electrical energy is formed, for the operability of the car.

The belt is an elastic, closed in a circle of tape, when damaged, the car stops its movement. This element refers to the category of consumables. That is, it cannot be repaired, as, for example, but only replace the new one. Therefore, in order for us on the way I caught the breakdown, you need to familiarize yourself in detail how the belt is arranged, how it needs to be serviced and replaced.

As we learned, the generator belt is a fairly important element of the entire design of the car. The main evaluation criteria are the length and width, thickness, as well as the profile. When the car is working, the belt receives a greater load. It can be concluded from this that the belt should be very strong, but at the same time it was elastic to provide good contact with rollers and pulleys. Manufacturers of these belts have a lot over its device. The belt is based on the elastic material, which is covered with a reinforcing plated multilayer base.

Depending on the shape of the inner surface, three types of generator belts are distinguished, namely: wedge, polyclinic and gear. The wedge belt in the cut has the shape of a trapezium, so that it can transmit a larger load. But his peculiarity is that it is not intended for reverse inflection, so it is used to transmit to one or more instruments. The polyclinic belt has the shape of glued several wedge belts, as a result of which it is somewhat wider. Seamless belts on the inner surface have grooves that provide higher transmission accuracy.

Sweet belt generator. What to do?

The lens of the generator belt to distinguish from other outsiders is very simple.

This is a cutting sound sound, which not only will notice the driver and passengers, but also the usual passersby. Such a sound occurs due to slipping the inner part of the belt. And that is, there are several reasons, among which: belt wear, poor quality belt material, as well as hopping, fuel and coolant on pulley or belt. Therefore, you first need to visually inspect the belt surface to wear it, and only then make a decision to replace it.

First you need to look at the following factors:

whether the integrity of the belt is not violated;
what degree of tension has a belt;
there is no traces of extraneous liquids on the belt or pulley;
there is no line offset where two pulleys are located.

If there were no defects, it was not detected, it is worth replacing the generator belt to better. Sometimes very hard belts lose their effectiveness, which is why the whistle may occur. A similar defect may be due to cold temperatures at which the belt becomes more rigid. But this factor is passing as the car warming up.

Replacing or stretch of the generator belt

As if we did not want to, once we still have to replace the belt, because its wear is increasing every day, and ultimately he will be in disrepair. For owners of "Kalina", this process will be very laborious, but if everything is done correctly, then everything will be not so difficult. Probably the greatest difficulty, when replacing the belt, is a small amount of podcast space. Therefore, good excerpt you will be useful. But in addition, you will need some skills, keys at 13.17 and 19.

For the fact that it was easier to maintain the repair work of the generator belt, the car is worth setting over the observation pit or to start it on the overpass. It is necessary, since some places it is easier to reach below.

Replacing the generator belt

Cars of domestic production were and remain popular with car enthusiasts. Because current issues relating to the spare parts and their replacement in the case of wear and breakage, need to be detailed and learning. One of these spare parts is the belt of the Kalina generator. Usually it is changed every 30-60 thousand km mileage of the machine.

The car generator is a device, with which the battery is recharged and maintain the voltage system necessary for the operation. After the motor factory, the battery partially spends its charge, but due to the engine operation, the energy returns by transmission through the generator.

It is noted that the driver's professionalism directly affects the generator power. Also during the transformation process, the generator obtained from the mechanical energy of mechanical energy into energy is provided by the operation of all the electronic devices of the car.

Kalina has a mass of instruments and systems for which electrical energy is necessary. It is required to include the ignition system, the work of the headlights of both neighboring and far light, for the possibility of using air conditioning, without which it is not for the warm season, and, of course, to maintain the battery charge at the required level.

Selection of a new belt generator for viburnum

Branded belts are more reliable

After the car passed a certain kilometer, it is required to replace the timing belt. Before replacing the replacement, you need to select and purchase a detail that must comply with all standards to ensure comfortable operation during the specified period.

Due to the nuances of the structure of the drive system, there is a direct dependence of the tension and the size of the belt from whether the air conditioning is installed in the car. In the case of its presence, the length of the belt should be more than 1 m, and in the absence - only 88 cm.

Depending on the year of release, Kalina has various changes in the design of the drive system, therefore, on the models of the early period, the timing belt must have a length of 82 cm.

Removing the generator belt

To perform the work on the replacement of the belt, you will need to collect the following set of tools:

heads for 8 and 13;
keys standard on 13 and 19;
lubricant plastic and penetrating to process parts of the mechanism during assembly;
tension roller (if the need for a replacement is detected during diagnostics);
new timing belt relevant model and length.

It should be understood that during the replacement, it will be necessary to spend a lot of time for the preparatory work related to the removal of elements that impede access to the Kalina generator:

remove protection;
remove the wheel using a balloon key;
remove the car liner;
remove the dvs pillow.

Work should be performed in the pit, as free access to all parts of the machine is required. After the preparatory work, it is processed directly to replacing the timing belt on the engine on 8 valves.

The key on 8, equipped with a ratchet, is weakened by a large nutrition nut, located on the stretching rod. In the absence of a ratchet, a cape or standard key is suitable for 8. Next, the actions are performed in the following order:

remove one or two terminals from the car battery in order to de-energize the system;
dismantle the glass player (tank with liquid);
remove the generator cover, breaking the locking mustache and collect them in different directions;
remove the washer with the belt of the gas distribution mechanism and remove the drive belt;
using the key, weaken the timing belt, which is fixed with nuts, and reduce the level of tension;
carry out work on the weakening of the tension;
remove the protection, and then the belt itself;
if necessary, remove the roller to replace it, for which the preliminary will need to remove the cap;
in the reverse order, starting from the roller, install new spare parts and fix them using bolts and retaining elements.

After installing the timing belt, it is necessary to test the strength of its tension and adjust if necessary.

Tensioner generator belt

If there is no confidence in their forces and there is no helper, it is better to visit the maintenance station, where professional wizards will work out correctly and several times faster.

The process of tensioning the timing belt

To determine the tension, it is necessary with the effort to press the timing belt. It is advisable to use a special tool that can be purchased at any automotive store. Under the influence of force, the belt must bend no more than 8-10 mm down.

The absence of a deflection indicates an excessive tension, which is a deviation and requires adjustment. If the tension is not strong enough, the operation of the mechanism will be observed the so-called slipping on the shifams. This process is dangerous for the operation of the battery, since the latter does not receive the necessary electrical energy, as a result of which it is not necessary to recharge it at all or partially. As a result, the battery flies and quickly fails.

If there is an increase in the load during the belt tension during the operation of the air-conditioned machine or without it, then earlier lose its performance of the tension roller and bearings interacting with the generator.

Mark for proper belt tape

When the tension inconsistency is detected, a number of manipulations aimed at correcting the situation should be performed. In order to loosen the tension, it is necessary using a special adjustment hench, perform rotation clockwise until the desired tension level is obtained. In the course of work, you need to check the tension by a special device. To enhance the tension, the adjustment pin should be wrapped in the opposite direction, also controlling changes.

Using non-hard technique, requiring the minimum amount of tools, adjust the tension, after which Kalina will be operated without breakdowns until the scheduled replacement of the timing belt.

Sixteenth glovenaya Valina simply pleases the simplicity of his service. :) I was told that to replace the generator belt, you need to unscrew the engine's pillow, but while the car was warranty and served in the service, I missed such things past the ears.

Old Gates, Mileage 40 thousand. Yes, yes, according to the regulations, replacing 30 thousand.

The belt has long been asked for a replacement, the new one was purchased and lay in the trunk along with the roller. The belt replacement had to be combined with the replacement of the radiator. Polisters flipped to the forums, I did not remember anything, I went to change. I already had a lot of things unscrewed, but, just in case I will list in detail:

1. Remove the washer tank, do not touch the tube. Need heads 8.10.
2. Weaken the belt tension. Keys 19, 8.
3. Remove the wheel.
4. We unscrew the stretching of the front suspension lever (one nut 24 and three bolts 17).
5. Remove the engine's mudguard. A handheld of self-heads with head 8 and two bolts 10.
6. Draw the engine for the bracket of the pillow so that it is just a little rest. The jack is not put at the very edge of the bracket, slightly deep into the engine compartment. Otherwise, he will hurry to push the new belt and remove the old without cutting it. Look at the place.
7. First unscrew the two nuts and the cushion fastening bolt to the body (top of the pillow).
8. Press the engine slightly down to remove the load from the two remaining bolts.
9. Then we unscrew the two cushion mounting bolts to the bracket (centered). Need a head TORX E14.
10. Remove the pillow through the formed gap change the belt.
11. We subsequent the lid of the tensioner roller. Remove the roller. Left carving! Change.
12. We collect everything back.

Pillow hangs on one bolt

When the engine prepuccus, the pillow hurts behind plastic pistons under the self-tapping screw of the mudguard (square such), had to pull them out.

One nut turned along with the hairpin. He wrapped back as a bolt.

The new belt is in place, it remains to pull.

On the forums again dozen hundreds of pages, how to pull the belt. How did I do:

1. Stretched the belt is rustling.
2. Went the engine, gradually included electrical appliances, light, stove and air conditioning.
3. Slistered - pulled up a couple of revolutions.
4. Went the engine, gave the load, whistling, pulled out.
5. In the day of operation, the belt stretched a little, witnessed. Pulled out finally.

Tip: Do not buy TORX sets with 3/8 inches heads. Under them a knot or adapter problem to find, better set 1/4 + 1/2 inches.

If long to suffer, something will turn out. Successful repairs!

The generator belt is an important element of "vital activity" of your car. From its integrity and correctness of the tension, the correctness of the operation of the generator, the quality of the charging of the battery, as well as the voltage level in the on-board network depends.

When weakening the belt begins whistle, the generator bearings wear can increase. In addition, the wrong stretch can lead to rapid destruction and further damage to the belt itself.

Such as:

Cracks, Lopins.
Uneven wear.
Open.

Therefore, you need to know how the adjustment of the generator belt is performed on Kalina, which and in what sequence to do.

Features of the generator belt diagnostics

If one of the above features appears, you must check the tension of the generator belt on Kalina without delay. Make it easy.

Press the belt with a certain force (about three kilograms) and measure the deflection using the ruler. If it is more than one centimeter, then the belt requires adjustment.

A more accurate check can be performed using a dynamometer. In this case, it is necessary to pull the belt with an effort of 10 kg * C (these readings you will see on the tool scale) and evaluate the deviation distance (it should be no more than 1-1.5 cm).

Preparatory work

Before tagging the generator belt on Kalina, spend a number of preparatory work:

1. Clean the tensioner nuts on the generator from dust and dirt using a metal brush, you can sprinkle WD-40 so it will be easier to twist them.

2. Prepare the necessary tool. To work, you will need a key to nineteen and eight millimeters.

If you have discovered a belt attenuation, then do not tighten with the work. Note that due to such a malfunction, the efficiency of the generator decreases, there are interruptions with a voltage in the onboard network, a loud "slip" belt on the pulley and other unpleasant problems.

Features of adjustment and suspension of the generator belt

Now let's look at how to pull the generator belt correctly. I would like to note that the whole process takes no more than 10-15 minutes. Consequently, go to a hundred and empty your wallet for the payment of the master - this is at least stupid.

Act in the following sequence:

Find the tension bar and slightly unscrew the locknut on it, otherwise you simply will not be able to turn the adjusting bolt. If the washer tank is bothering, remove, but it is not necessary.

Rotate the tensioner bolt, achieving that moment until the required belt tension is created.

After that, twist the lock nut with the required effort, on this work for stretching the belt to Lada Kalina is completed, it remains only to check.

After completion of the work, make sure that the belt tension is correct (one of the ways we mentioned above) and the normal operation of the generator.

To do this, turn on the ignition and carefully inspect the instrument panel (the corresponding indicator, battery charging) should be onto it.

Now you can start the motor and give the car a little work. All this time, watch the indicator - after a few seconds it should go out.

Remember that belt adjustment is even a newcomer. The main thing is to clearly follow the scan scheme and do not forget to diagnose the tension from time to time.

Otherwise, you may encounter more serious problems that will continue to lead to high costs. So be vigilant and take care of your car. Good luck on the roads and of course without breakdowns. Various additions and suggestions Write in the comments.