Universal arches extends

Wheel arches are not only elements of tuning. Small mechanical damage and sticking a large amount of dirt will be avoided if wheel arches extenders are used. With such an addition, the vehicle will become really more powerful and will stand out among other vehicles involved in road traffic.

Characteristics

Arch expanders mostly sold on rolls in rolls. According to visual characteristics, universal arches expansion are similar to a rubber tape with a kind of drawing of the profile. Depending on the manufacturer, iron plates for fixing can be included in the wheel arches expansion.

Easy fastening technology and relatively low cost of rubber products are their main advantage compared to plastic wheel arch expansion.

Consider the main characteristics of products:

• can be used on cars of any brand;
• easily installed;
• resistance to mechanical stress is much lower than that of plastic wheel arches.

Important! For the manufacture, exceptionally reinforced rubber is used, which significantly increases the duration of the operational period.

All sets are sold for 4 elements. The only disadvantage of such products can be called that they cannot be painted. Anyway, neutral black color is suitable for a car with any color paint on body elements.

Preparation for installation

Many vehicle owners establish wheel arch expansion with their own hands only after the appearance of noticeable defects on the wing. In such situations, it is necessary to pre-clean, sharpen and apply a layer of fresh paint to the treated surface. You can additionally clean the entire surface on which the wheel expander will be mounted. By completing the preparatory procedure, you can start setting.

Some manufacturers are installed on their cars Rubber arches extends that become unsuitable for further use in the shortest possible time. First of all, such products need to be removed. If there is no desire to carry out a full dismantling, it is enough to beat slightly protection. It should be borne in mind that the visual characteristics of the vehicle can significantly deteriorate.

Before installing the universal wheel arch expansion, such tools and materials should be prepared:

• metal plates for fixation;
• pVC lubrication;
• rubber wheel arches;
• self-tapping screws.

PVC oil is necessary to prevent corrosion of body elements after screwing the screws. Excess lubricant can be erased after the fasteners are processed. It should be borne in mind that simple mastic is not suitable for such purposes.

Installing the archprints ARON is nothing complicated. First of all, it is necessary to connect rubber products with metal plates. These parts are mounted on both sides by about 2-3 cm from the very edge. The width of the products may be too big. In this case, you can simply cut it from the back.

Important! Before starting to fix the rubber, it is necessary to make accurate measurement of the required length. The material used may be simply spoiled if the cropped fragment turns out to be too large. During the measurement, it is best to consider the length with a margin.

A suitable length of the used screws is also considerable. The vehicle body may be damaged during the installation process if the fittings for fastening will be too long.

Installation

The arches expanders are not so difficult to install, as it may seem, at first glance. If you install yourself on your own, it is recommended to make preliminary marks on rubber parts in places where the screws will be screwed down and put them on a bit. Fasteners are recommended to be used in the amount of 4-5 copies on the span. In the metal plate will have to drill a few additional holes for more reliable fixation of the part. For greater convenience, it will not be superfluous to use a screwdriver. Sliced \u200b\u200bfragments are fixed, after which the entire product is attached to the housing.

Main features of products

You can call several main features of the universal rubber wheel arches extensors:

• the coating of the machine is protected from scratches and other small damage;
• the cost of rubber products is much lower than plastic;
• the side windows are reliably protected from dirt hit, as well as not too serious mechanical damage;
• install rubber parts with your own hands simple enough.

Visual characteristics of the vehicle can be improved without much effort and costs.The machine receives additional protection against damage. To buy universal rubber wheel arches extends can everyone.

More information can be obtained by reading the video below: