Do-it-yourself UAZ car tuning
Everyone knows that, having invested certain funds in any undertaking, it will be crowned with success. Do-it-yourself tuning UAZ 469 is no exception.
If desired, you can turn the car into a representative SUV, they will look at it with envy and surprise. It should be noted that UAZ tuning is done in order to be able to adapt it for different operating options:
- travel long distances;
- fishing;
- hunting;
- various expeditions and so on.
Tools and materials for car tuning
So, the tools and materials that are necessary for tuning the interior of a car:
- textile;
- scissors;
- straight or curved screwdriver;
- glue;
- sewing machine.
To make a bumper bumper for UAZ, you will need the following tools and materials:
- Styrofoam;
- mounting foam;
- fiberglass;
- sandpaper;
- epoxy resin;
- file.
Tuning UAZ "loaf"
Updated car UAZ "loaf"
Tuning UAZ "loaf" provides for the installation of a heating unit, body upgrades and interior alterations. During such work, special attention is paid to the patency of the car.
On the UAZ "loaf" it is possible to install all terrain tires (for various surfaces).
To finalize the suspension, you need to purchase additional sheets for the springs.
Shock absorbers can be replaced with similar designs with greater energy intensity. For UAZ "loaf" it is planned to replace bridges.
The factory-assembled car is already equipped with military or civilian bridges. It is possible to purchase a "loaf" with bridges of the "spicer" type. Each type of construction under consideration has non-locking cross-axle differentials.
To increase the patency, a blocking device is installed. A low-speed motor will work better with an older gearbox and transfer case. To drive at a higher speed, it is recommended to install “spicer” bridges, a fine-module transfer case, a 5-speed gearbox and a ZMZ-409 engine on the “loaf”.
The problem of lighting the road surface in a dark period of time is solved by installing xenon with your own hands.
Tuning salon UAZ "loaf"
The UAZ "loaf" heating system needs mandatory modernization. This is due to the fact that the stove has a tap located under the hood of the car. This faucet breaks down very quickly.
It is preferable to equip the stove with a solenoid valve from BMW. It can be mounted in the gap of the inlet or outlet pipe. This valve is a non-separable device. In order for it to become collapsible, you need to drill 4 rivets in the lid.
To increase the comfort of movement on an SUV, it is recommended to install soft seats with heating and electric drive. Thus, the installation of a damper allows you to reduce the load that is placed on the steering mechanism when the wheels collide with various obstacles.
If desired, you can mount a new steering wheel that is not able to beat off fingers when driving, as well as hitting an obstacle. Such a device has an original appearance that meets all safety requirements.
Mounting the steering wheel will greatly increase the space in front of the driver. When equipped with a roll cage, a seamless pipe is required.
Tuning UAZ "hunter"
In this video, you will be shown how you can upgrade from a car such as the UAZ Hunter. Enjoy watching!
Tuning UAZ "hunter" provides an opportunity to turn a car into an original car with a unique design. Since a car of this type has a low price and a lightweight design, the owner can embody all his fantasies both in changing its chassis and in increasing its cross-country ability.
Tuning UAZ "hunter" needs an individual approach, taking into account the operating conditions of the car. Basically, the factory engine is replaced with a diesel one, the native shock absorbers are changed, the springs are replaced with longer and stiffer ones.
In addition, both levers and gaskets are replaced with those that have the best quality and reliability. Tuning of this car includes repainting for camouflage, it will not do without glass tinting, installation of hatches, winches, air collectors, power bumpers.
The UAZ "hunter" car is intended for military use, as a result of which its simple appearance with high cross-country ability is fertile ground for the introduction of the most interesting, unexpected ideas.
So, aggregate tuning is required to increase performance, engine power, since the factory equipment of this model does not correspond to the capabilities. Thanks to various works to improve the appearance of the car, it is possible to emphasize the individuality of the model, and its original, unique look will give the owner a significant status.
The owner, thanks to the change in the appearance of the car and the transformation of the interior, will feel more comfortable, comfortable and confident driving his updated car.
Tuning UAZ 31514
Many owners of the UAZ 31514 are starting to think about tuning it. So, an improved car can be used to pass in hard-to-reach places. In this video, you will be shown the transformation of the UAZ Z31514. Enjoy watching!
First, you will need to lift, change the UAZ into BF Goodrich wheels, which will increase the ground clearance up to 35-40 centimeters. It is possible to install a front bumper made of pipes to provide the ability to easily overcome various obstacles.
A winch with a force of 3-4 tons can be installed on the bumper of a car. And the rear window will need to be equipped with heating, as well as wipers with washers. For easier passage of fords and obstacles, you need to install a snorkel from an aluminum pipe, which provides air access to the motor.
For the purpose of a comfortable ride through the forest, it is possible to install power thresholds that will allow you to perform the largest turn in difficult places. The threshold allows you to successfully rest against a tree, then push off the rear axle, turn the car in one place. For more movement without refueling, the car must be equipped with a fuel tank (100-120 liters).
It makes sense to install such wheels and tires, with the help of which it is possible to easily overcome off-road and ensure good vehicle handling on asphalt. Here, the wheel arches may need to be finalized. The muffler should be replaced with a straight-through one, since the factory mufflers are not of good enough quality.
Tuning option UAZ 31514 for the north
In bridges, instead of free differentials, you can install independently blocking your own mechanism, which increase the car's patency on soft soils. You can make changes inside the cabin.
The door trim can be made from aluminum on the bottom and high quality vinyl on the top. It is also possible to install a door handle inside the cabin, install more comfortable leather seats.
A hatch can be mounted in the roof of the UAZ 31514 in the passage between the front and rear seats. Amplifiers are welded into the roof along the perimeter of the hatch.
It is useful to attach a roof rack to the UAZ, it can fit various fishing and hunting things. It is useful to install a compressor designed to inflate wheels.
Alteration of the UAZ 469 will not require large investments, as well as the skills to perform complex work.
It will not be difficult for the owner to do the tuning of the UAZ 469 on their own, saving money. The first thing to start with is the appearance of the car. Since the UAZ 469 is mainly used in conditions close to extreme, high-quality painting is an important element.
If there is no need for full body painting, spot or partial painting can be applied. In this case, it will not take much time and effort, thus, it is possible to eliminate damage in the form of scratches, chips from stones or rubble.
It is necessary to pay attention to painting the plastic lining installed on the car. Additional strengthening of the body is not required, since it is mounted on a reliable rigid langeron frame. It is possible to make original bumper tuning using polystyrene foam: make changes to its shape, remove defects, damage.
At the time of attaching the foam using mounting foam, it is possible to make a bumper of any chosen shape.
Which radar detector to choose, you will learn from this unique. We recommend to all those who have not yet decided on the choice.
You will learn how to make soundproofing with your own hands in a Priora car.
If necessary, you can make holes in the foam, where sidelights, fog lights or other LED lighting elements will be inserted. In the future, this design is processed with fiberglass, epoxy resin.
So, fiberglass is applied in several layers, well impregnated with epoxy to increase the strength of the structure. After the resin has dried, the resulting surface must be treated. The defects found must be well putty with a putty mixture, as well as sanded and sanded to a smooth surface.
Tuning the UAZ 469 interior should include work aimed at increasing its comfort. This is the installation of the necessary additional devices, upholstery upholstery using new high-quality materials or leather. You should install powerful acoustics, an LCD monitor, and a multimedia system.
So, in the cabin of the UAZ 469, it will be interesting to look at the front panel, covered with leather, trimmed with wood or high-quality plastic overlays.
Strengthening and modernization of the chassis of the UAZ 469 provides for:
- replacement of shock absorbers;
- installation of a transverse stabilizer bar;
- installation of alloy wheels, rubber, etc.
Tuning UAZ 469 needs a mandatory modernization of the wheels of this car.
For better engine performance, a straight-through muffler is required.
