Tuning ZAZ 968m: We carry out without support from
ZAZ 968m tuning is a car that can now be found, let it rarely, but you can. In general, some tuning masters can make an excellent car from it, which will even look like a mini cooper. And it all started with the distant 70s.
A small-scale and small car ZAZ 968 released at the Zaporizhia car factory. Production began in 1972 and lasted until 1994.
In the period from 1973 to 1979, the first modernization of ZAZ 968 occurred, after which the modernization of the car was named as ZAZ 968A. In 1979, an improved Gaz 968m was released for everyone, in which the external design and the overall design of the car was updated.
The model ZAZ 968m was equipped with modern rectangular lanterns, rectangular turning pointers with black plastic edge, upgraded instrument panel, convex front panel, increased luggage compartment, spare wheel, which is in the trunk to the right of the engine.
And now from such a Zaporozhets make a ZAZ 968m tuning. And they do everything, who has a desire, because the car is easily tuning, as well as the same compact.
In ZAZ 968, MEMZ - 968 can be installed version m, which has a power of 40 liters. p., MEMZ-968A with a capacity of 45 liters. p., Memz-968g with a capacity of 50 liters. from. and engine MEMZ-966 with a capacity of 30 liters. from.
The engine cooling circuit was also changed, the air comes from the stamp grille of the hood roof. Side air collectors were presented in the form of small lattices for ventilation of the motor system.
Now the automotive markets are overcrowded by sales of domestic retro cars, popularity on such exclusive models is justified by the most interesting modifications and improvements in the car.
Since the car ZAZ for decades of its existence is strongly outdated in technical terms and general design, it is necessary to hold a special tuning ZAZ 968m.
ZAZ has never been different by special technical indicators, the car was simply the most affordable for purchases, with excellent noise, comfort and reliability.
To correct this situation, tuning facing materials is carried out and updating the technical capabilities of the car. The variant of the modification of the machine is presented in the photo, ZAZ 968M tuning looks even interesting.
Methods for increasing the maximum speed of ZAZ 968m
Modern motorists will notice that ZAZ 968m has very slow speed indicators, some will say that he is practically not going. The maximum power that the car can develop the 70s is 50 liters. from.
At that time, this indicator seemed sufficient, now this engine capacity is considered invalid. Therefore, the tuning of the engine ZAZ 968m is needed, which includes not the small costs of forces and money.
To add power to the engine, repair work can do you in the price of another such car.
The most reliable and fast way to change the characteristics of the engine is replacing the old motor on a completely new system. All changes in the car must be entered into a technical passport, including the engine replacement.
One of the installation options is a motor from a series of cars, but the factory transmission will hardly interact well with a new engine, so it is also proposed to replace the gearbox.
To create a sports type of car, you set the front-wheel drive on the ZAZ 968m. Therefore, it is necessary to remove the engine and install it on the hood. Next, we connect the engine to the transmission of the front drive and, you can proceed, to the practical testing of the system.
Tuning auto necessarily creates a completely new interior design. Since now in the car stands a kind of outdated design, it is necessary to make such a tuning of the car, which can create a comfortable habitat. The possible version of the modernization of the cabin is presented in ZAZ 968 photo tuning.
Paths of transformation and enhance the comfort of the cabin
The car is equipped with a small space in the cabin, in which it is difficult to unfold. There are two rows of seats, dashboard with tachometer and speedometer.
It is recommended to start tuning a car with the installation of high-quality noise insulation, after which they go to the installation of new comfortable modern seats. You can also upgrade old seats, but this kind of tuning takes more time and money.
Sitting from Tavria Slavites 1102 models are established, they are perfectly suitable in size in the salon ZAZ 968m. Do not forget to replace the steering wheel to a more convenient modification. There are also special kits on the market to install a new dashboard in the ZAZ made of fiberglass.
ZAZ 968m tuning chassis car
For the front brake node used native auspices and bearings. On the axis of the tricks it is necessary to wear a classic hub. It is necessary to finalize the axis of the tracks, for this we twist on the thread a special nut.
The planting surface must be swaming to eliminate one plane. Fastening plates Caliper must be attached to the standard mounting of the brake shield. So, we put on the hub, then the brake disc and the second spacer for departure correction.
To set the rear disc brakes - it is necessary to sharpen a new bearing body with a displaced fastening plane, while the caliper mounting plate is clamped between the lever and the bearing housing.
Native hub was taken for rear brakes, which is being finalized under the pressing of the transition plate. Spacers between the hub of the brake and wheels should not be.
The obtained do not even go in comparison with the drums. Exact deceleration controls with an effective braking system, regardless of speed. Also reduced the force of pressing pedal.
