Toning with your own hands

the main / Tuning

Tinting car windows is one of the first steps tuning car. Actually make Toning with your own hands It is not difficult and on the Internet you can find many toning reports. But complete instructions for tinting with photos and videos in one place you will not find. I am alone so I decided to consider this issue in more detail and collect all useful tinting materials In his report.

In connection with the introduction of new fines on tinting cars, the so-called is becoming the so-called Removable toning with their own hands" or " Automatic toning". In this report I will show how you can todded VAZ 2110 in a simple way.

Pluses tinting

The biggest plus self tinting - Saving money compared to toning in the car service .. That is, a tint car in the service will cost about 10 times more expensive than toning on your own.
Toning glass It will help you by 50-60% reduce the heating of the cabin in the summer.
Tinging a car Delays up to 99% of harmful ultraviolet rays
When breaking glass toningholds broken pieces of glass, thereby protects you from cuts.
Toningprotects from the reflections of the Sun or headlights of the counter car.
Toned car glass Hide the interior content from prying eyes.
Toningprotects plastic from sunlight and cabin panel, which can crack from strong heating.
Toned car Looks more attractive.

Choice of film for tinting

The main questions when buying a tint film usually such: what film is better for toning? What is the difference between films for tinting? What manufacturer choose for toning film?

At the stage of buying a film for tinting a car, I suggest Do not save on time and price, and it is better to find goods with a proven manufacturer than to buy that it fell and perform work on toning glass at home.

List of high-quality films with certificate and guaranteed indicators:

Film Commonwealth Laminating & Coating, Inc.,
Film by Courtaulds Performes Films.
Film Sun Control Products Garware Polyester Ltd.,
Film Sun-Gard, Glass-Gard and Safe-Gard Film Technologies International, Inc.
Films Johnson Window Films.
Films MSS / Solar Gard
Corporation films " 3M"

Packaging usually 1.5-2kv. Milk, plastic spatula for smoothing and knife.
The most simple and short-lived film For toning - one-layer with a colored glue layer.
The highest quality film For toning - multi-layered, neutral color with metal spraying.

Preparation of a car toning tool

All necessary consumables and tools for tinting a car:

Roll of tint film (in a roll, usually 2kv.m. Films, this is enough for 4 side windows. On the side windows and rear windows you need about 3kv.m. Films); Price: From 200r. / Roll.
Rubber spatula or plastic scraper (The latter is less desirable, as it leaves microzarapins). Price: 30r.
Shampoo(For example, Children's "Johnsons Bayy" 100ml.). Either a similar shampoo or soap solution, but the main thing is not to use liquid for washing windows. Price: 100r.
Spray(For example, "Mr. Muskul" without content).
Acute Stationery Knife with Retractable Blade. Price: 150r.
Dry rag without a pile
Clean / Filtered Warm Water
Technical or home hair dryer (not necessarily for tinting side windows, but preferably). Price: 800r.

Preparation for tinting a car

We prepare a 10-20% shampoo solution in water and pour it into the spray gun.

Toning with your own hands I advise you to start with side windows. And only after you have any experience to move to the posterior or windshield.

Further script can unfold in two scenarios:
1-toning with light removal
For more comfortable and high-quality tinting Glass is better to remove. How to remove the glass in the VAZ 2110?. A little to do, but get a really pleasant and useful effect.

How to beat online casino by 368,548 rubles, using a hole in the algorithm?
Step-by-step instruction

Hey! On the Internet, I know how Jerome Holden and I earn on testing algorithms to all the famous Casino Volcano: I am looking for vulnerabilities in games, make bets and tearing a kush.

Now I collect community for a more global project, so I share schemes for free. I tell everything as much as possible, nothing is difficult, you can work directly from the phone, even girls will cope)). You can test the algorithms, make money and decide - to join my team or not. Details here.

For three months I earned 973 000 rubles in my schemes:

It is necessary to toning the glasses in a pure spot. If indoors, then without dust, because Dust is one of the causes of bubbles.
2-toning without removal of glasses
If we decided to tint the glass without removing them from the car, then you need to clean the car's salon from dust.
To make tinting a car preferably a cloudy day, after the rain (then there will be less dust) and in the absence of insects.
All go directly to tinting car windows.

Toning

Wash the glass on both sides. To remove sand particles during washing, you need to use a scraper / spatula.
If you perform toning in the car, then before washing the glasses seals are removed And at will, the upholstery is covered or removed, in order to avoid water or soap mortar.

Cut with a toning film From the outside of the car. That is, originally spray with soapy water glass from the street. Then we apply a toning film to the glass. Due to the soap solution, it will stick. Then we cut the stationery knife along the glass contour.

We peel off the protective filmfrom toning . During peeling, they immediately spray with soap solution. It is better to find an assistant here. One will keep a transparent layer, and the second - gently pulling and spray dark.
Same spray and glass from the inside machine. At the expense of a soap solution adhesive on the film is neutralized for several tens of minutes.

Apply a toning film to the glass and adjust. While the glue on tinting is neutralized, it can be freely moving on the glass. Scraper We start to remove a solution from under the film, movements from the center to the edges. The squeezed solution wipe the napkins.

Extraly on the edges, the film is cut off(Some cut off the film at an angle of 30 degrees to the glass) so that it would not reach the edge of the glass approximately 1-2 mm. Otherwise, over time, the film will begin to go. If the glass is toned by car, then part of the film adjacent to the lower seal on the seal 2-5mm. This will eliminate the jackets when lowering the glass.

If there is a hairdryer, then dry glass around the perimeter. If there is no hair dryer, we are waiting for 3-4 hours in a warm place and gently set the glass back to the car.

Finally, the film driesfor about a day, two depending on the weather. During this time, do not lower the glass.

CONCLUSION TONING OF SIDE GLASS

How many passes time to tint do it yourself With removal of glasses:

Removal of glasses 1 toh.
Toning~ 4-5h.
Installing glass in machinesw. 2h.

If you have chosen high-quality film and not too lazy to remove glasses from the car. Performed work on tinting glass at home, and not on the street, then in 95% of cases the result of tinting should be pleasantly surprised.
After side glasses tinting with their own hands You can already evaluate your strength to think about toning rear window. And if you do not even decide on such a brave step, you can always toned the rear window in the car service. The price of tinting only the rear window will be much less than the tinting of the entire car.

Toning rear windows

In contrast to side windows, rear or windshield tinting more time-consuming And requires some experience.

All complexity of rear window tinting It is that it has curvedform. Of course, the film is stretched within certain limits (it is not necessary to do without an industrial hair dryer) and in most cases it is enough for tinting. But a highly curved surface toned one piece is unlikely to succeed. We have to resort to several patterns.

Consider the case when toned without cuts, only by stretching the film. Before gluing the film, you need to give it the shape of a curved surface (or called formingtoning). Without removing the protective layer, stretch the film on the glass moistened with soap solution from the outside. Smooth off the film with a scraper from cents to the edges Keeping air bubbles and surplus of the solution, parallel to heating the film on curved areas with a hairdryer. Thus, the film will stretch and take the shape of the rear window. After toning technique, the same as with side windows. Remove the protective film, wet the soapy and apply to the glass from the inside. While glue neutralized We smooth the film from the cent to the edges of the kicking bubbles and a solution. Cut the edge and dry hairdryer around the perimeter.

Rear window tint with cuts: If the bending of the rear window does not allow you to laughing the film evenly, then it should be toned in 2-3 bands. Sticking stripes costs alternately, starting on top. At the same time, beyond wetting water. So that the film of the film was less noticeable, you need draw a section on the heating line of the rear window
After tinting, two days do not turn on the rear window heating.

Booking film

In what advantages of armored film Before the usual film for tinting:

Armored film Protects windows from mechanical damage (blows of jumped out of the wheels of pebbles), scratches, chips.
Armored film It has sound and thermal insulation effect.
Armored filmcontacts to violent penetration into the car
Armored film Delays up to 99% of ultraviolet radiation

For instance the effectiveness of the booking film When sticking to transparent glass with a thickness of 6 mm:

Reducing the flow of heat: 46%
Reducing heat loss: 0%
Weakening of the blinding effect of bright light: 58%
Weakening of UV radiation: 99%

Booking film Printed as well as the usual toning. There is no difference in technology. The difference is only in the film itself. Booking film is just thicker(up to 300 μm) and tougher. But it's easier to work with it. By the way, the film can be glued to another film, thereby creating different combinations. For example, toning + booking, or double booking, or double toning, etc.