UAZ remission of the body in various ways, including lifting

Werethod UAZ we have the same as in demand, like Niva. These legendary cars will not soon disappear from Russian roads. The fact is that the level of road surfaces in the country leaves much to be desired, and good SUVs in the world - once, two and turned around. For this reason, everything that is connected with the alteration and modernization of UAZ and the NIV is very interested in the owners. Let's find out how tuning on UAZ is being held, and what advantages he gives.

Operating advantages of UAZ and upgrades

ATTENTION! Found a completely simple way to reduce fuel consumption! Do not believe? Auto mechanic with 15 years old also did not believe, until he tried. And now it saves 35,000 rubles per year in gasoline!

Despite the fact that in the factory version of UAZ is able to overcome such obstacles that overseas SUVs are only "dreaming", car owners periodically think about tuning modernization. It concerns this not only improvement in design, but also the modernization of running qualities.

It is advisable to start working on UAZ with your own hands. It certainly affects the passability of the car and on a lot more.

Note. As you know, there are special standards that help tyunera determine ideal on-road automatic parameters.

What do you think there is not enough tadpolat or loaf, equipped with a good body? The fact is that alteration it clearly does not hurt him. Probably, many have heard of such a procedure as an elevator. It implies the raising of the body of the SUV, which significantly increases the possibilities of the SUV.

In addition, the lifting will allow the Wheel to be installed on the UAZ with a large diameter, and this will definitely affect the pavement for the better. In the process of lifting, a subframe is also enhanced, gaskets are put in place connecting the body with a frame. As a result, the body can rise by 200-250 mm and even more.

In addition to lifting, the owner owners also engage in the installation of additional equipment, allowing to quickly pass complex areas of roads. This component includes the following elements:

• Bumper, which differ in reinforced design. Such body parts imply the presence of winch and kenguryatnik. A winch is put in front of the SUV, although you can try to install both rear, because it definitely does not hurt;
• Special crankcase protection is installed on force installation and gearbox. The fact is that periodic driving off-road carries large risks associated with the fact that stones and solid surfaces can easily break through unprotected pallet;
• A special trunk called expeditionary will help you transport almost anything in it. In addition, you can put a staircase - it will significantly simplify the use of the trunk;
• Installation of additional headlights is not a mandatory upgrade procedure, but for an SUV frequently on the road at night and at twilight, it will be a good opportunity.

It is noteworthy that the headasting and other models of UAZ are easy to maintain and repair. The owner of our car is already 2-3 years of operation, with their own hands and without any help, successfully repairs its car, gaining experience along the way. Foreign cars do not possess such a convenient opportunity.

Note. For example, if Toyota Land Cruiser will be stuck in the swamp due to engine problems, write disappeared - you need to call a tow truck. With UAZ, everything is wrong, because it is possible to take absolutely all mechanisms without the use of special equipment. Just a standard set of wrenches and a little patience.

Elevator Modernization

Independent tuning UAZ is quite possible, if approaching this case with full responsibility and knowledge of the case. First of all, you need to study the foundations of this procedure so as not to make any errors.

First of all, the person who decided to make tuning needs to be known that there are two types of modernization elevator. This is the alteration of body and suspension.

In the implementation of the modernization of the automotive island, TUNERA is given the opportunity to take advantage of simplicity and less risks to spoil. For this reason, this method is popular among beginners. The procedure will almost not affect the center of gravity of the car, contributes to the preservation of the sustainability of UAZ behavior on turns and off-road.

But the lift of the suspension is a certain risk, because the center of gravity is significantly increased. This method is, as a rule, the pro. But this technology is able to significantly improve the indicators of the car's passability.

Consider to start the features of the body elevator UAZ:

• The elevator of this type is carried out using special pillows that are put between the frame and the body. They are considered one of the best - components of an aluminum type. They are inexpensive, and are able to simultaneously provide rigid fixation of the island to the frame.

Note. Nowadays, the range of models of spacers is quite wide. Learn their and foreign companies. Note that even imported pillows are ideal for our UAZ. It is also recommended to use hockey washers instead of them, which have proven well.

• Tuner in the modernization process will have to be cutting the arches and wings to install the wheels with a large diameter. It is also recommended to install side mudguards to protect the glass from dirt;
• Due to the complex refinement with wheels and spacers, it is possible to raise the body to a distance of up to 80 mm. In this case, the UAZ clearance increases by 15 cm, which cannot be positively affected by the car's passability.

As for the elevator suspension:

• When implementing this procedure, you need to be able to competently calculate the risks associated with tipping. It is also recommended to calculate the limit of the inclined corner of the Cardanov to protect the procedure from exceeding the rules. In other words, if you have an illiterate lifting, the cardan will lose their performance.

To increase the guarantee of good work and eliminate possible tipping, the following is done:

• Initially, the rut is expanding due to the installation of wheel spacers;
• Installed after wide tires and discs, be sure to negative;
• It is also recommended to replace bridges to more productive (for example, spice or leopard).

So, the lift of the suspension is made in several ways. All of them contribute to lifting the suspension, but each of the methods is characterized by the complexity of execution.

The easiest option is a lightweight elevator that is recommended if the preferred height is small. Modernization is carried out using additional sheets for springs. There is another way - to establish other springs with more sheets.

The average elevator or high, as it is also called, implies a 30-millimeter raising. In this case, it is enough to install gaskets between the pneumatic and a bridge. On the other hand, if this method is not suitable for any reason, you can use other alternative methods.

As a result, it becomes clear that there are no special difficulties in the elevator for a well-known person. The main thing is to understand that when working in your own hands, do not avoid risks, especially if the suspension is upgraded.

For owners who are not accustomed to risks, and for those who share conservative views, it is recommended to carry out UAZ upgrades by treating the body surface. It will be enough to limit the tinting of glasses and painting. Also, it will not be superfluous to strengthen the steps and side thresholds, install a bump on the hood and hold a number of other, no less obligatory for the SUV tuning procedures.

Video about how the body elevator is held

Salon Modernization

Recommended on the UAZ also tuning the cabin. Initially, the design of the inside of the UAZ looks pretty ascetic. In principle, many suits many, because the car is almost always used as a working. On the other hand, at least the minimum of comfort in modern conditions should be provided.

So, the modernization itself will depend on the UAZ specialization. If it is used only as an SUV, the salon will require a minimum of alteration. In particular, it will be necessary to remove the factory shu, in order to facilitate cleaning. Do not forget that the used UAZ often passed water obstacles, mud baths, etc. To clear the results of all this, noise insulation must necessarily be dismantled.

As for the more or less comfortable level of the interior trim, then in the UAZ, it is customary to do the following:

• Process the floor using corrugated aluminum;
• Instead of standard seats, install leather chairs and folding sofas;
• Put an additional heater and ensure the proper ventilation level;
• Install additional shvi.

In some cases, you can put a hatch. Its size depends on the preferences of the owner and, of course, the main purpose of the car.

In addition, if the car is operated mainly in the city, it will not be superfluous to equip its BC, various multimedia systems and high-quality alarms. Decorative elements have proven itself well.

Want to know what else can be achieved by upgrading the UAZ? Watch the video, study the photos - materials, tables and schemes. We recommend to read other articles of our site, in which useful information is also provided.