Mail 6 Drive drive from wheels. Operation and adjustment of the machine. The system of electrical equipment includes two front and rear lights, the lamp of the license plate lighting and the power supply harness of the power supply from the tractor power supply

Anyone close to Earth knows that without mineral fertilizers do not see high yields. Observing the necessary proportions of their introduction, you can get excellent results and good revenues from the sale of our products. The RM-5 aggregate, called the fertilizer spreader, will help quickly and accurately distribute them along the field.

Make this device since 1985 in the city of Neftekamsk, at the enterprise Bashxelmash. The more modern name is MBU-5. Factory designers have developed an aggregate, very similar to a popular spreader 1-RMG-4. The differences of the new machine sticking to the MTZ-80 were the operation of all mechanisms from the tractor shaft of the power take-off, as well as the chassis made by the Tandem type. The design over time has become more perfect, but no indigenous changes have undergone.

Purpose

With this unit, it is possible to fertilize the land with solids of various densities in the form of powder, granules or crystals. In particular, it can be ammonia nitrate, superphosphate, potash salt, dolomite and lime flour, other fertilizers. They can be made in the soil in spring or autumn, as well as to spend the summer feeding of intensively growing grain.

It is possible in all regions other than the highlands. With it, it is scattered and transported not only fertilizers, but also sand, lime, various chemicals in bulk condition.

Advantages and disadvantages

Advantages:

• Easy adjustment of the unit, easy to use.
• Adjusting the dose of fertilizer making the height of the rapid gap. In the instructions for the machine are given this data for each type of fertilizer.
• It is possible to scatter useful substances both along the entire width of the field, and only on the edges or in the middle.
• The presence of a mechanism that ensures maximum uniformity of feeding along the entire width (up to the maximum).

Disadvantages:

• Compared to mounted spreaders equipped with a very accurate dosage system, the uniformity of work is somewhat lower.
• No ability to move on your own - you need a tractor.

Stock Foto Mineral fertilizer spreader RM-5

Device

Metal frame is equipped with breathing and loop for attaching to the tractor. The five-ton welded body where fertilizers are falling asleep, is part of the frame. Inside the body is a plate-rod-type conveyor. It leads to a movement either the tractor shaft of the power take-off (if the fertilizer is made more than six tons per hectare), or (with a smaller number of fertilizers) shaft inside the half-axis rear wheelchair.

The conveyor supplies a rash mass on the sowing discs of a centrifugal type, each of which is equipped with four blades with grooves, fixed perpendicular to each other. Movement on them comes from the tractor B. Cardan, conical type gearboxes, clinorem-type profiles and satellite shafts are involved in the transmission.

To fertilizers fade more evenly, there is a bimetallic paculent shield installed on onboard supports. Dosing Sewber, moving around the clamps in the back of the body, is controlled by the helmet installed on the shaft. Two stars engaged with slats allow you to adjust the flap height.

The chassis is a cart with balancing, designed by Tandem type and not having a springs. The wheel of the detachable type is six stiletto and nuts attached to the hub on which there is a drum for braking. The brakes of the unit are two types: mechanical (intended for braking in the parking lot) and pneumatic, single-wire. The latter is controlled from the tractor cabin, pedal. You can manually brake with a crane. The front wheels stop.

To connect to the tractor electrical system there is a plug. Separate wiring harness is connected to alarm device. In the back of the unit there are two lamp.

RM-5 spreader diagram


1 - bunker; 2 - feeder: 3 - drum-chopper; 4 - anti-flame plate; 5 - separating device; 6 - rotor; 7 - conveyor

Specifications

Specifications of mineral fertilizer spreader RM-5:

In the video, the principle of operation of the RM-5 fertilizer spreader on the example of the MBU-6 model:

It is intended for grinding blind and not pressed mineral fertilizers (sorted and non-nash).

The drive of the working bodies is carried out from the tractor. It consists of a frame with a running part, a grinding device, a bunker with a feeding mechanism and a clamping device, separating device, a shipping conveyor, devices for removing mark-ups, mechanism of driving a working bodies. Aggregates with class 1.4 tractors.

Technical specifications

Performance per hour of main time, t:

When removing mineral fertilizers ... 50

When removing-grinding of the blind mineral fertilizers ...... 22

When grinding the pressed inadequate mineral fertilizers ...... 25

Power, kW .............. 22

Transport speed, km / h ......... 16

The height of the unloading from the folding conveyor, mm. 2410.

The width of the conveyor, mm ... "....... 650

Road clearance, mm ........... 260

Capacity of the bunker, m3 .......... 0.95

Types: Grinding device ......... Drum with a movable brush

separating device ........ Active combined complexity of the compilation of the aggregate, people-b. . . . 0.15

Overall dimensions, mm .......... 6450x3910x2730

Mass, kg ................ 1886

(In an option with an electric drive - stationary, when working with the tractor - semi-trailer)

Designed to obtain 2- or 3-component tukosces with simultaneous loading into vehicles. It consists of a frame, three dosing and longitudinal conveyors, a mixing device, a shipping elevator, three bunkers and three dosing valves, a drive mechanism, an electric drive, a wheelbarrow with a hydraulic drive and a braking system, as well as a weight control device. Drive of working bodies from the electric motor or in the tractor.

The main mixing body is a blatment beater. The position of the blades of the bitter in relation to the direction of movement of the flow is adjustable using nuts and monetakes. Loading the mixer is carried out on one side. With the help of dosing valves, the necessary values \u200b\u200bof the slots are established for a given proportion of the mixture.

Aggregated with class tractors 0.9; 1.4.

It serves the operator or tractor driver (when working from a tractor B).

Technical specifications

Performance per hour, t:

The main time ........... 37.1

Operational ........... 23.0

Power consumption, kW ....... . . eleven

Transport speed, km / h ......... 15

Dosing accuracy,% ......... ± 3

The average unevenness of mixing quality,%. 10

Capacity of the bunker, MJ .... 2,15

The number of bunkers ....... 3

Loading height

Bunkers, mm ......... 2100

The height of the shipment of the mixture, mm. . . 2700.

Road clearance, mm .......... 280

Overall dimensions, mm:

In the working position ......... 11050х2500х3400

Transport ............. 14 800x2500x3650

Mass, kg ................ 2575

The use of the installation of UTM-30 compared to the TC-30 machine provides a decrease in the specific material intensity by 35%, increasing labor productivity by 10%.

Hydrahed 1-RMG-4

Designed for the surface introduction of all types and forms of mineral fertilizers, lime materials and gypsum. It is a uniaxial semi-trailer and consists of a frame, a body, a conveyor drive device, distributing organs, the driving system. Bimetallic body to provide the necessary corrosion resistance.

Adjusting the fertilization dose is carried out by changing the width of the slot between the bottom and the dosing flap according to the ruler attached under the flap to the rear board.

Aggregates with tractors of traction class 1, 4.

Services a tractor driver.

Technical specifications

Performance per hour of the main time

At a speed of 10 km / h, ha ............. 8 ... 14

Working width of capture when making

Fertilizers, m:

Granulated ............ 14.

Powder and small crystalline .... 8

Speed, km / h: Working ............... 12

Transport with cargo .......... 16

Dose of application, kg / ha .....: ..... 100 ... 6000

Loading height, mm ........... 1840

Road clearance, mm ....... 370

Overall dimensions, mm:

In the working position .......... 5800 x6000x1840

Transport ............. 5450x2100x3150

Mass, kg ............ 1430

Machine for making mineral fertilizers and seed seeds MWU-0,5A

It is intended for the surface introduction of solid mineral fertilizers in a granular and crystalline form on fine-floating fields and in gardens, followed by sealing them with tillage tools, feeding winter crops, fearful (at an early stage of development), meadows and pastures, sowing seeds of Sideratov.

The deposit dose is established depending on the operating speed of the unit by the adjustment mechanism. The uniform distribution of fertilizers is regulated by the dosing device.

Machine MBU-0.5A is mainly used by the overload technological scheme.

It consists of a conical bunker with a safety mesh, a scraper feed and bottom dosing devices, a rotational violation of the centrifugal tuberying apparatus of a pneumomechanical type and the mechanism of the working bodies of the working bodies.

The delicate apparatus consists of a paddle disk. On the blades there is a cover with a central loading hole. In the center, the disk has been strengthened cone-divider. The feeding device is made in the form of scraper rotating on the shaft, located parallel to the dampers of the dosing device.

Aggregate with wheel tractors of traction classes 0.6; 1.4; 2.

Services a tractor driver.

Technical specifications

Performance per hour, ha:

The main time ..... ■ ....... 8 ... 16

Operational time when making a reloading technology of granular fertilizers with a dose of 200 kg / ha and with bulk density

1200 kg / m3 ............. 5.6

Load capacity, kg ........... 600

Specific fuel consumption, kg / t ......... 7

Power consumption, kW ........ 6

Speed, km / h:

Working ............... 6 ... 15

Transport ............. 25.

Working width of capture when making fertilizers, M:

Granulated ............ 16 ... 24

Crystalline ....... 8 .. .10

Uneven application,%:

On the work width of the capture ....... 22

In the course of the movement of the aggregate ........ 10

The rate of application, kg / ha:

When making fertilizers ......... 40. . . 1000.

When sowing seeds of Sideratov ....... 10. . . 200.

Maximum loading height from

earth surfaces, mm. 1500.

Overall dimensions, mm:

In the working position .......... 1350x1350x1500

Transport with MTZ-80 / -82 ........ no more than 5Y0x2600x 2500

Weight, Kg................ 220

Designed for transportation and surface solid introduction of mineral fertilizers, their mixtures, lime and gypsum.

It is a uniaxial semi-trailer and consists of a body, a running system, driving the working bodies, conveyor, scattering disks, a metering device, a tukboard, pneumatic and hydraulic systems, electrical equipment. Workers of centrifugal type.

It is aggregated with tractors of traction class 1.4, equipped with hydrocallic and brake system drive.

Services a tractor driver.

Technical specifications

Performance per hour of main time; ha. . 7,88.

Load capacity, t ............ 5

Working speed, km / h ........... 11

Road clearance, mm. ........... 400.

Pitch, mm ................ 1800

Specific, fuel consumption per hour

Basic time, kg / ha. h .. 1,2

Uneven fertilization fertilizers

Capture width. % ................. ± 22

Doses of application, kg / ha ............ 200 ... 4500

Width of fertilizer, m:

Granulated ............ 15.5

Small-crystal ........... 8.

Overall dimensions, mm ........... 5375x2135x2000

Mass, kg ........... 2050

Designed for transportation and surface continuous introduction of weak lime, gypsum-containing materials and mineral fertilizers.

It consists of a body, frame, chassis, coupling and dosing devices, conveyor, dispersion disks, driving of working bodies, hydro and pneumatic brake systems, electrical equipment.

The body is welded: the side is from the three-layer corrosion-resistant steel, the bottom is stainless. Scattering discs - flat, have the outer diameter of flames for increasing the rigidity. On the discs are the scaps of the C-shaped section, curved in the front part towards the rotation of the disks. The drive of the working bodies is mechanical. In addition to the working brake system, the machine is equipped with a manual parking brake with the rear wheel drive.

Aggagative with the K-701 tractor. Services a tractor driver.

Technical specifications

Performance per hour of main (operational) time when making, hectares:

Fertilizers dose 400 kg / ha

(Transportation distance 4 km):

Granulated ........... 22 (13.2)

Crystal ............ 12 (7.2)

Lime and gypsum-containing materials

A dose of 6000 kg / ha (transportation distance is 10 km). . 4 (2.4)

Specific fuel consumption, kg / ha ........ 6.2

Width of capture when making, m:

Granulated and crystal fertilizers. 14 ... 22.

lime and gypsum-containing materials. 10. . . fourteen

Speed, km / h:

Working ............... 8 ... 15

Transport ............. up to 30

Road clearance, mm ... ....... 400

King width, mm ............. 2340

Specific pressure driving wheels on the soil, MPa. 0,2

Doses of application, kg / ha ........... 300 ... 12 000

Non-uniform distribution by working

Width when making,%:

Granulated fertilizers ........ ± 22

Crystal fertilizers, gypsum-containing and

Lime materials ......... ± 25

Uneven distribution of fertilizers along the go

Movement of the unit,% ............ ± 10

Maximum loading height (from the surface

Earth), mm ................ 2650

Overall dimensions, mm ........... 7300x2860xx2650

Mass, kg ................ 4000

The use of the MAV-16 machine in comparison with RM-16 provides a decrease in labor costs by 21.8%, the best distribution of granular fertilizers in the width of the capture. The machine has a more advanced design of the Packover, which ensures the speed and convenience of performing adjustment. Improving performance ensures an increase in the carrying capacity and operating speed on the soft soil due to low pressure tires.

Designed for surface introduction into the soil of mineral fertilizers, lime materials and plaster. Aggregate with T-1 50K tractor.

Productivity, t / h ..... 7.1

Load capacity, t ...... 11

Width of fertilizer, m:

Granulated ...... 14-20.

Powder and small crystalline ... 8-14

Dose of fertilizer, t / ha. . . 0.3-6

Speed, km / h:

Working ......... 15.

Transport ....... 30.

Overall dimensions, mm ..... 6000x2465x2300

Mass, kg .......... 3220

It is intended for transportation and surface introduction of aerated dust fertilizers (phosphate flour) and limestone materials (lime flour, shale ash, etc.), as well as for overloading them in warehouses.

It consists of a tank, a balancing trolley, shut-off and rod devices, a loading tube, filters of the first stage, brake and pneumatic systems, electrical equipment and alarm devices. The RKVN-6 vacuum pump compressor drive is carried out from a tractor in a counter-use and clinorem.

Loading the machine When working with a rod device is carried out through the stone separator from the ArUP-10 transport vehicles or from the bright using a self-loading device. For emergency release of air from the tank serves as a crane.

Rassching material is carried out pneumatically by all working bodies-from the tractor cab.

Aggregates with T-150K tractor.

Services a tractor driver.

Technical specifications

Performance per hour of the main time (when

Dose of fertilizer 6 t / ha and working speed

10 KM / C.), T............. 48,6

Sawing device .......... rod

Fertilizers:

Dose, t / ha ............... 2 ... 10

Width, m ............... 11

Non-uniformity,% ........... 25

Load capacity, t ............ 10

Working pressure in tank, MPa ....... 0,12

Working permit in tank, MPa ...... 0.06

Motion speed, km / h:

Working ............... 15.

Transport ............. 35.

Mass, kg .......... "...... 5800

Designed for transportation and continuous surface introduction of solid organic fertilizers for direct-flow technology when fields from farms (boils) are removed to 2 km.

Operated on plains or slopes to 5 degrees, at ambient temperature is not lower than -5 ° C. It can be used to transport other agricultural goods with unloading conveyor.

It consists of a platform, front and side sides, a running system consisting of two wheelbalances with wheels, power transmission (drive shaft), transmission shafts with a safety clutch, gearbox, the actuator shafts of the conveyor and the scattering device, a ratchet mechanism, spreading device and chain drives, Electrical equipment, pneumatic brake drive, parking brake drive.

It has the following executions:

Row-6m-1 -C rear hydraulic board;

Row-6m-2 - with a rear hydraulic board to a set of additional equipment for the transport of lightweight cargo;

Row-6m-3 - with a set of additional equipment for the transport of lightweight cargo.

The hydraulic rear side of Row-6m-1 and Row-6m-2 is designed to reduce the losses of transported goods.

When installing additional equipment on Row-6m-2 and Row-6m-3, they can be used to transport crushed feed (silage, shyden) and other lightweight (density up to 400 kg / m3) of agricultural goods.

Aggregates with wheel tractors 1d (type, MTZ-80/82, MTZ-100/102) having a VOM, hydrocruck, hydraulic content, drive of pneumatic brakes and a socket for connecting electrical equipment.

Services a tractor driver.

Technical specifications

Load capacity, kg ........... 7000

Body capacity, m3:

For transportation of lightweight cargo ........... 12

for applying fertilizers ...... 4.8

Performance per hour of operational

Time on making organic fertilizers

(at a dose of 40 t / ha, transport speed not

Less than 16 km / h, operating speed when making

10 km / h, transportation distance to 1.5 km), so. . at least 22.

Deviation from uniformity of fertilizer

In the course of the movement and width of the introduction,%. . . ± 25.

Fertilizers:

Working width, m .......... 4 ... 8

Dose, t / ha ............. 10; twenty; thirty; 40; 50; 60.

Full resource, t ............ 32 000

Road clearance, mm .......... not less than 310

Loading height (from the support surface of the machine), mm:

Performance for fertilizer. 2000.

For transportation of lightweight cargo. 3000.

Working speed, km / h .......... 7.44. . . 12.67

Mounting complexity (dismantling)

additional equipment, Chel.-h ........ 4

Tire pressure, MPa (kgf / cm2) ...... 0.24 (2.4)

Overall dimensions (no more), mm: Length ............... 6300

width ........... 2500.

height ..... 2700.

Mass performed, kg:

Row-6m .............. 2170

Row-6m-1 ............ 2270

Row-6m-2 ............. 2700

Trailer - Tractor Tractor Spreader

Designed for transportation and surface introduction into the soil of manure, peat, peafon-cut composts and other organic fertilizers. With the removed working body, you can use for the transport of various agricultural goods with unloading their body conveyor back.

The main nodes: frame, chassis, body, conveyor, scattering the drum type apparatus, drive mechanism, electrical equipment.

The rate of application of organic fertilizers is regulated by changing the speed of the conveyor through the installation of replaceable asterisks.

The drive of the conveyor and the scattering device from the tractor B.

Technical specifications

Performance, t / h ..... 25.3

Performance per hour of main time, t. 60

Capture width, m ............ 6 ... 7

Working speed, km / h .......... 10

The rate of applying fertilizers, t / ha ....... 20 ... 40

Loading height, mm:

On the floor of the platform .......... 1390

On sides ............. 2090

Overall dimensions, mm ......... 7060x2520x x2600

Mass, kg ............... 4000

Trailer - Tractor Tractor PRT-16A

Designed for transportation and continuous surface introduction of organic fertilizers, as well as for the transport of various agricultural goods with unloading conveyor back (with a removing device with a scattering device). Load capacity 16 tons

It consists of a frame, a body that feeds the conveyor, spreading device, the mechanism of the recreation device drive and the drive of the conveyor, the driving system with brakes, electrical equipment.

Changes have been made, distinguishing ABT-16M from the PRT-16 machine:

Exclusive lifting body and hydraulic equipment control body

The front side of the body is inclined,

In the front of the body - an external board with a length of 2600 and a height of 250 mm,

The length of the conveyor is increased by 1080 mm,

Increased speed of rotation of spreading bodies,

Reduced the length of the frame.

Changing the dose of fertilizer's application is carried out by permuting asterisks in the conveyor drive mechanism. Work is carried out by a shuttle way.

Aggagative with T-701 tractors.

Services a tractor driver.

Technical specifications

Performance H Hour of the main time, T 65.0

Width of fertilizer, m ....... 7. . .eight

Loading height, mm:

By main sides .......... 2240

On sanding sides ......... 2480

On the floor platform .......... 1490

Working speed, m / s ........ 2.8

Road clearance, mm .......... 370

Overall dimensions in the working position, mm. 8100x2500x2480.

Mass, kg ............... 5325

Designed for the formation of a roll of pre-laid out a bunch of manure or compost and distribution of fertilizer on the surface of the field.

Aggregate with T-150K tractors, T-150. Services a tractor driver.

Technical specifications

Performance per hour (at dose of application

10 t / h and speed of 4.5 km / h), t:

The main time .......... 465

Operational .... ...... 235

Making width, m ........... 35

Dose of application, t / ha ........... 40. . . 100

Uneven application,%:

Along the length of the pass ........... 30

Along the entire length ............. 65

Overall dimensions with T-150 tractor. mm:

Length ............... 9600/8700

Width ............... 3250.

Height .......... "..... 2825/2510

Designed for self-loading, transportation, mixing and solid surface introduction of liquid organic fertilizers, as well as for the transport of technical water.

It consists of a tank, a coupling device, vacuum installation, filling rod, centrifugal pump. Safety valves-liquid and vacuum. Level gauge, balancing suspension, electrical equipment.

The front part of the semi-trailer tank through a coupling device relies on the hydrocruck of the tractor, and the rear through the balancing suspension - on the trumps of the chassis wheels. The machine is equipped with self-loading pressure and switching and distribution devices. The drive of vacuum pumps from the hydraulic motor GMSH-32l. The rate of making fertilizers at the operating speed is regulated by installing various replaceable nozzles.

Aggregates with T-150K tractor. Services a tractor driver.

Technical specifications

Performance per hour of the main time (with a dose of 40 t / ha, transportation distance 2-3 km and medium speed 20 km / h), ha ............ 38.6

Load capacity, t ........... 10

transport with cargo ......... up to 30

Width of fertilizers, m ....... 6. . . 12

Dose of fertilizer, t / ha ....... 10 ... 60

Self-loading time, min ......... 4 ... 7

Non-uniform deposit on the working width and movement of motion,% ....... up to 25

Maximum depth of fluid fence, m ....... up to 3.5

Overall dimensions, mm: in the slave. position and transport 7500x5500xx3000

Mass, kg ............... 4100

Designed for self-loading, transportation, mixing and solid surface introduction of liquid organic fertilizers, as well as for the transport of technical water.

It is a semi-trailer tank, the front of which relies on the rolling trolley connected by means of a hitch with a hydroelectric tractor, and the rear through the brackets - on balancing suspensions. On the right side of the tank has a refueling rod, in the rear, the switching device.

The rate of fertilizer is set using interchangeable valves, fixed on the tight nozzle of the switching device, and depends on the forward speed of the aggregate and the angle of the reflective flap. The drive of the working bodies from the Tractor K-701.

Services a tractor driver.

Technical specifications

Performance per hour of main time (with a vine of the application of 40 t / ha, transportation distance 2 ... 3 km and

Average transport speed 20 km / h), t .............. 50

Load capacity, t ........... 16

Width of fertilizer, m ....... 6 ... 12

Motion speed, km / h: Working .............. up to 10

transport (with cargo) ........ up to 30

Time of self-loading, min ........ 6 ... 12

The rate of fertilizer, t / ha ....... 10 ... 60

Uneven application on the working width and movement of motion,% .... up to 25

Maximum depth of fluid fence, m ...... up to 3.5

Mass, kg ... no more than 5800

It is intended for submission to the soil of 2- and 3-component solutions of liquid complex fertilizers with additives of trace elements and pesticides or without them. It can be used on the introduction of ammonia water, carbonamicates and working solutions of pesticides, as well as refueling machines with working fluids.

It consists of chassis, a balancing trolley, capacity, a centrifugal pump with a gearbox, suction and pressure communications, intake sleeves. Tools for surface lump. Folding and laying the rods are carried out using the hydraulic cylinders from the tractor cab.

Made in the form of a uniaxial semi-trailer, on which the components and assembly units are mounted and is a trailer machine aggregated with tractors of class 1.4. Services a tractor driver.

Technical specifications

Performance per hour of main time when

Making fertilizers, ha: superficial ........... 14 ... 20

intravenor ........... 6.

The width of the capture when making, m: superficial ............ 17

intravenous ........... 7,35

transport ............ 15.

Consumption of working fluid when making, l / min:

Surface ............ 30. . . 300.

Intravenous ........... 10 ... 140

Overall dimensions in the working position when making, mm:

Surface ............ 6600x 16 750x3000

Intravenor ........... 8125x7650x3000

Road clearance, mm .......... 350

Pitch, mm. ............. 2040.

Mass for making, kg: superficial ............ 3745

intravenor ............ 4775

The technological process is as follows. The pump sucks the working fluid from the tank and supplies it to the flow switch. Then the fluid through the injection filter enters the sprayers of the rod, and the part to the nozzle of the inkjet pump and the stirrer. The operating pressure is established using a fluid flow controller controlled remotely (from the tractor cabin), and is controlled by a manometer.

Self-removal of the subcorter is carried out through a filling sleeve connected by fast-consuming couplings with a subcorter and refueling tank.

Aggregates with T-150K tractor. Services a tractor driver.

Technical specifications

Performance per hour of the main time, ha ... .. 14 ... 22

Capture width, m ............ not less than 17

Speed, km / h: Working .............. 8 ... 12

transport ............. 15.

Fluid consumption, l / min .......... thirty . . . 300.

Overall dimensions, mm: in the working position ......... 6700x16 630 x3500

transport ............ 6900x3570x 3800

Minimum rotation radius on the outer point of the bar, m ........ 11.89

Road clearance, mm .......... at least 350

Pitch, mm ............... no more than 2040

Mass, kg ............... 4490

Pottlers - sprayers mounted Pom-630, Pom-630-1

Designed to introduce water ammonia to the soil with continuous cultivation, inter-row treatment of disappear crops, meadow fertilizer and pastures, solid spraying of soil pesticides with preseign cultivation, spraying workers "Mi liquids of pesticide pesticides.

The pom-630-1 sprayer is equipped with a device for the bandage introduction of liquid pesticides or their mixtures with liquid complex fertilizers when crops and a transcendent treatment of sugar beets.

Aggregates: POM-630 with YUMZ-6Al / 6AM tractors, MTZ-80/82, DT-75MV. Cultivators KPS-4-02, KRN-4.2A, KRN-5,6, KRN-5.6A with fixtures of ULP-8, ULP-8A, ULP-8A-01; Pom-630-1 with T-70C tractors, YUMZ-6Al / 6AM, MTZ-80/82, DT-75MV, SST-8A seeders, SST-12B, KPS-4-02 cultivators, KRN-4.2A, KRN 5.6, KRN-5,6A, USMK-5.4B, devices of the ULP-8, ULP-8A, ULP-8A-01.

Technical specifications

Pom-630 Pom-630-1

Performance per hour of the main time when working, ha:

FROMCultivators ........ 2 ... 5

With seeders ........... - 2.4. . . 4.3

With ULP type devices. . . 1.76. . . 2.65

With solid spraying rod. 9.7. . . 19,4.

Working speed when working, km / h:

With cultivators ........ 5 ... 9

With seeders .......... - 5 ... 8

With ULP type devices. . . 6.3

With solid spraying rod. 6 ... 12.

The width of the capture when working, m:

With a device of type ULP .... 2.8. . . 4,2

With solid spraying rod. 16,2

With cultivators ........ 4; 4.2; 5.6 4; 4.2; 5.4; 5.6

With seeders .......... 4.8; 5,4.

Capacity of tanks, l ......... 2x315 \u003d 630

Consumption rate of working fluid, l / ha:

With a solid spraying with a cultivator .......... 100 ... 300

Strip spraying ..... 100 ... 150

Feeding ........... 100 ... 600

Solid spraying rod. . 75. . . 200.

Overall dimensions in the working (transport) position, mm:

Length ............. by aggregate

Width ............ 16200 (2550)

Height ........... on the tractor

Mass with a complete set of workers

Organs and devices, kg ...... 700 730

The use of pom-630 sprayer sprayers, Pom-630-1 compared to the versators-sprayer universal, "provides an increase in productivity, respectively, by 22 and 81%

Machine MBU-6 is designed for transportation and surface continuous introduction into the soil of mineral fertilizers and weak limestone materials in soil-climatic zones: Russian Federation, Ukraine, Belarus, Baltic States, North Caucasus, Urals, Siberia, Kazakhstan, Moldova.
The unit increases the ugregation by 40% as well as accelerates the ripening of vegetable and grain crops.
The machine is aggregated with the tractor of tractor class 1.4 ... 2 (MTZ-80, MTZ-82), equipped with a hydraulic traction hook, the rear shaft of the power take-off with a speed of 1000 rpm, conclusions for connecting electrical equipment, hydraulic and pneumatic systems. It serves her tractor driver.

Device

Machine MBU-6 is a semi-trailer equipped with transporting centrifugal type dispersion and two dissigant working bodies. The body of the machine metal, all-welded design, consists of onboard and frame. For access to it, the staircase is used, which in the transport position is installed in brackets on board. The PECTOR includes a flow divider and two tray with the ability depending on their installation (three positions) to redistribute the material supply in the width of the seeding band. The drive of the feeder conveyor and the scattering disks is carried out from a tractor in or separately (feeder conveyor from the driving wheel of the machine, scattering discs from the tractor in the tractor). The tension of the feeder conveyor is carried out by moving the spring-loaded axis with the help of bolts.

The machine has two brake drive independent of each other: pneumatic, acting from the tractor pneumatic system, and mechanical manual. The pneumatic brake drive serves to brake the machine and the tractor simultaneously in motion and when stopped and triggered by pressing the tractor brake pedal. Manual mechanical drive brakes serves to slow down the car in the parking lot (parking brake). Turning is performed by rotating the handle clockwise, the proceedings against.

The electrical equipment system includes two front and rear lights, the lamp of the license plate lighting and harness the power supply of the power supply from the tractor power grid. The principle of operation of the machine is as follows: Fertilizer (made of material) is supplied by the feeder conveyor from the body of the machine through the dosing damper and the toupener on the discs, which dispel it with a fan-shaped stream along the soil surface.

Specifications

Mass of kg

Dimensions:

Length mm

Width MM.

Height mm

Pig MM.

Load capacity T.

Aggregate with tractors

MPa tire pressure

Performance ha / h when making

granulated Fertilizers with a density of 1100 kg / m2

limestone materials

Width capture M when making

granulated fertilizers

limestone materials

Transport speed no more than km / h

Number of service personnel

MBU-5 fertilizer spreader is a semi-trailed unit for making bulk mineral fertilizers. Machine for making the MBU-5 fertilizer has the following design features: the running part of the MBU-5 machine is a lonely balancing trolley of the tandem type, consisting of two balancing connected by the central axis on the sliding bearings, with axes for fastening the wheels. Inside the body there is a device for uniform unloading fertilizers, which is a volumetric screen from a bimetal installed on two supports fixed on the front and side sides.
The dosing valve of an improved design is a Sewber moving in the guides on board the body using the helmet fixed on the shaft together with two asterisks, which are engaged in engaging with the flashers on the flap.
The rod-plate conveyor machine consists of straight rods connected into a closed circuit with a link plates. The drive of the conveyor with doses of making up to 6000 kg / ha is carried out from the move wheels, over 6000 from the tractor B.

Scattering discs have four groove blades installed at an angle of 900 each other. To increase the strength, the discs are equipped with eccentrics and annular corrugations. The drive of the disks is carried out from the tractor B through the drive shaft, intermediate shafts, two clinorem contours and two conical gearboxes.
Specifications:
Load capacity, kg.
5000
Body Capacity, M3
4,3
Working width of M:
- Granular
11-17
- small crystalline
7-11
Working speed, m / s
3,6-3,9
Transport speed, m / s
5-6,9
Range doses of making mineral fertilizers, kg / ha
100-1500
Performance of hectares per hour of main time when making mineral fertilizers a dose:
- 400 kg / ha
14
Mass, kg.
2170
MBU-6 spreader is designed for transportation and surface solid introduction to the soil of mineral fertilizers and weak lime materials.
MWU-6 Specifications Drive: Rear Axis: 1 Loading capacity: 6 t Number of doors: 1 Number of seats: 1 Color: Gray Red Fuel: Diesel Mail 6 Spreader of mineral fertilizers, in good condition, help delivery.
Price: negotiable (depends on configuration)
Call at any time!
Accessories in assortment! Call!
Machine for making mineral fertilizers and lime MWU-8
MAV-8 machines are designed for transportation and surface solid introduction into the soil of mineral fertilizers and weak limestone materials.
specifications:
Load capacity: 8 tons
Mass: 2200 kg.
Transport speed no more: 30 km. / h.
Number of service personnel: 1 tractor driver

Accessories in assortment! Call! The availability of spare parts.

Machine for making mineral fertilizers and lime MWU-6

Mineral fertilizer spreaders MBU-6 are designed for transportation and surface solid introduction to the soil of mineral fertilizers and weak limestone materials. The bunker is made of bimetal (stainless steel).

Main technical characteristics

All machines are complete for more secure preparation. The housings are defective, cleaned, color. The gearboxes pass a complete bulkhead or replaced with new ones. Bearing groups, rubber products, hinged connections, brake system, scattering discs new ones.

The machines are equipped with electrical wiring and drive telescopic cardan shafts.

All scatteries are given an annual warranty.

This type of PSM technology is not provided.

There is also almost the entire list of spare parts

MAK MAV-6

Designed for transportation and residence on the surface of the soil of mineral fertilizers and weak limestone materials. The machine is a uniaxial semi-trailer, on the frame of which the body 2 is mounted (Fig. III.5, a), dishoning the apparatus 4, tuktonitor 5, mechanisms and transmission.

The all-metal welded body has an inclined side and a flat bottom, which moves the upper branch of the chain-plate conveyor 7. The conveyor will go with chains on the brief and rollers of the slave shaft and drives from the chain drive 3 or from the tractor in the transmission reducer and chain Drive 3. When making fertilizers at a dose

200 ... 2000 kg / hectares use the first drive variant, and when Meliorants are introduced at a dose of 1000 ... 10 000 kg / ha - the second option. Switching transmission from the first version to the second and back is the turn of the gear lever located on the left side of the machine, to "Enabled" or "off". In the back of the body, a window 8 is cut out for feeding the fertilizer from the body to the dyeing machine 4. To change the height of the window and regulate this dose of fertilizer, the valve 9 is shown, which the mechanism 10 is moved up-down.

The PECTOR 5 serves to divide the flow of fertilizer into two equal parts. It consists of a flow divider 11 (Fig. III.5, b) and two removable trays 12. Rearming the mounting bolts in the holes A, B and B, change the slope of the trays and the place of receipt of fertilizer on the discs.

The screaming device is equipped with two discs 14, on the surface of which blades are fixed 13. The discs are fixed on vertical shafts of gearboxes 6 and are rotated from the tractor.

The working process. Fertilizers are loaded in the body with a loader, go to the field and include transfer to the feeder conveyor and discs. When the machine moves along the field, the border conveyor moves out of the body a layer of fertilizer, in thickness equal to the height of the window, and resets them with a continuous stream perintener. Encatarating into two streams, fertilizers come to rotating discs, they are fond of them in rotation and spread through the band by the bandwidth of BP (Fig. III.5, B).

Adjustments. For aggregation with MBU-6, the tractor set the necessary frequency of rotation of the VOM (1000 minutes' "). The table is chosen the position of the flap for a given dose of fertilizer and rotation of the steering wheel 10 (see Fig. III.5, a) combine the edge of the damper with the corresponding The division number of the scale. The uniformity of the distribution of fertilizers in the width of the RVR (see Fig. III.5, B) depends on the tilt of the trays and the location on the zone disks in which fertilizers come in. Rearing trays in the holes A (see Fig. III.5 , B), B and B, change the direction of sieving fertilizers and achieve the necessary uniformity. If the trays are fixed in the hole A, then the concentration of fertilizers in the middle of the rieving band is increasing, if in the opening in its edges.