Choose a sewing machine: what will never be told in the store. Why electronic sewing machine? How to make an electronic sewing machine write alphabet

Automatic lines means that the machine independently fixes the stitch after the user pressed the button. Now there is no need to tie nodules at the end of each seam.

Automatic needle stop in the upper position

After the stitch is completed, the machine automatically sets the needle in the upper position. If it is more convenient for you that the needle stops in the lower position, you should pay attention to sewing machines with a needle position switch.

Automatic threader

The fixture in the thread in the needle is completely automatic mode, significantly alleviating the sewing process.

Automatic nithe chub

The automatic string mechanism is implemented as follows: the user clicks on a special button, as a result, it receives automatically cropped down and upper threads, and the needle raised in the upper position.

Automatic litter lift

Availability of automatic lifting of the foot. After the sewing operation is completed, the paw rises automatically without user participation. If desired, this function can be turned off and used to lift a manual or knee lever (if available).

Automatic Pressure Pressure Controller

Pressure of the foot is automatically adjustable depending on the type of tissue used.

Automatic flashing shutdown when winding bobbs

When connecting the winding mechanism, the punching room is disabled automatically.

Vertical shuttle

Vertical, "swinging" shuttle is a classic type of shuttle, committing oscillatory movements. It is usually installed on inexpensive, electromechanical models of sewing machines. Only with this type of shuttle can use metal bobbs.

Upper transporter

Used for smooth, double fabric advancement. Indispensable when sewing multilayer and complex tissues, as well as with a combination of drawing (strip, cell). It can be built into the design of the sewing machine or go bundled. For most sewing machine models, the upper transporter can be purchased additionally.

Built-in thread

It makes it easy and quick to conceive a thread into the needle.

Built-in nithe chub

Trimming the thread is carried out using the built-in nithe chub.

Embroidery alphabet

Built in the car alphabets performed in embroidery mode.

Embroidery design

Built in memory machine design with embroidery.

Horizontal shuttle

The most modern and widespread type of shuttle. The bobbin is inserted from above, and you can always visually control the residue of the bottom thread through the shuttle device cover. Sewing machine with such a shuttle works without skipping and breaking threads, silently and easily.

Two-position needle position

Two pre-installed needle positions (usually left and central). Used to perform various sewing operations, for example, when tipping lightning.

Decorative lines

Most often they are used for decoration and decor.

Stitch length

The maximum distance between the two needle punctures at sewing.

Additional accessories storage compartment

Allows you to place a rich set of sewing machine. Many ELNA sewing machines have patented additional storage systems.

Additional feet of the legs

Allows you to place the volumetric materials under your paw.

LCD display

High resolution LCD display. The display screen displays the selected operation and the recommended settings (foot, thread tension, length and stitch width).

Needle plate with device Quick start

Accelerates the beginning of sewing. Just set the bobbin to the shuttle device, stretch the thread in the direction of the arrows and cut with the help of the built-in nithe chub.

Keys for choice

A simple and convenient sewing sewing operation (stitch, loop, alphabet, etc.) with keys.

Direct selection keys

A number of computer sewing machine models have keys to direct sewing operations. They are depicted on or another sewing operation, which can be selected in one touch.

Button winding bobbins

The winding button on the bobbin allows winding thread simultaneously with the sewing process.

Knee lever

Using the knee lever, adjusting the paw lift. Knee lever Allows you to free your hands to control the sewing process.

Combinations of lines

Using the built-in machine memory, you can combine the built-in stitches, thereby creating your own line

Easy fastening paw

The paws are easy to change, removing them from the adapter with one click on the button. You can enjoy the paw just fastening it ("Latching") it to the adapter.

Maximum embroidery size

The maximum embroidery field, which can perform the machine without rearrangement of the hoop.

Multipositional needle position

Computer sewing machines can position the needle in more than 15 positions, which makes it possible to accurately accommodate the needle. A number of models of computer sewing machines Janome and Elna can position the needle in more than 91 positions. This can be useful for work with pretentious accuracy in miniature sewing projects.

Monogram in 2-3 letters

You can decorate and personalize any project using numbers or letters.

Nizhny conveyor

Provides a soft and smooth feed of the material. Its design can be from three to 7 rivers, which are moving along an oval or rectangular trajectory.

Disable lower conveyor

With the help of a special button or lever, simply omit the guide rails of the lower conveyor for embroidery, free-run stitch and work in other techniques. In this case, you will no longer need a duct plate.

Accessory storage compartment

It is intended for storing accessories and accessories to the car, as well as tools for sewing, such as embroidery scissors Premax.

Needle positioning switch (up / down)

With this switch, it is raised or lowering the needle, as well as programming the needle position at the end of sewing.

Loop-car

Perform a loop in one step. Put the button into the paw for the loop and click on the pedal. The machine itself will hold the loop of the desired size. A number of advanced computer sewing machines can independently determine the size of the loop based on the size of the button.

Hinge-semi-automatic

Sewing machine can perform a loop for four simple steps without turning fabric.

Fed

Special embroidery device by car. Different with dimensions and type of fastening depending on the brand.

Working lines

Designed to perform basic sewing operations.

Reverse / Return Lever

Thanks to the reverse, the machine can sew in the opposite direction. In computer models of sewing machines there is a reverse button.

Still balance controller

The mechanism is used to adjust the unbalanced lines and loops.

Pressure regulator foot on fabric

Allows you to adjust the pressure of the paws depending on the type of fabric. Pressure pressure regulator expands the range of flavored fabrics (from the thinnest (organza, chiffon) and knitwear to heavy palp and denim fabrics).

Controller tension top thread

The tension regulator of the upper thread allows you to achieve the perfect quality line, adjusting the tension of the upper thread depending on the line used and the thread.

Regulators on the panel

Selection of sewing operation, length and stitch width Mechanical regulators on the front panel of the machine. For the convenience of the user, designers of sewing machines are trying to give them the most ergonomic form.

Free sleeve

The free sleeve on the sewing machine is designed to work with narrow products such as sleeves, cuffs or bottom of jeans, for example, for their liner.

Different stores use and mix the concepts electronic, computer, mechanical, electronically mechanical, electric, etc. sewing machine. As a result, coming home after consultation, people cannot understand what kind of beasts they saw on the shop window .. Whether it was an electronic car, or what other.

Essentially, modern household sewing machines are divided into just 2 types. And there is nothing more to invent)

The first view is mechanical sewing machines. These are machines in which there is no electronic board, or there is a simplest control unit. But copiers correspond to the lines. And they, how to imagine themselves, you can not fit into the car in an unlimited quantity. From here and a set of lines - up to 24.

Do not confuse lines and operations. And then many manufacturers write that there are 40 operations in their car ... But in essence there is 24 copiers, and everything else is regulated by simply changes in the stitch width and length stitch.

As examples of classic, "iron-stable" sewing machines, you can bring Janome 1221, Janome My Excel W23U, Janome SE 518, Janome 7518, Janome 7524A, Janome 7524E. Many people think that due to the needle positioning functions and smooth speed adjustment of the machine type W23U or Janome 7524E has become electronic, but it is not quite so. Just in them shoved the simplest electronic functions)

Mechanical sewing machines are further separated by power (this is very important for this kind of machines). There are cars "Light", for example, Janome MS 100, Janome MT 2216, Janome DC 2030, and there are cars with good power, allowing to work with dense tissues without effort. Such cars have already been named "Iron-resistant" slightly higher)

Second type - electronic sewing machines. These are machines in which the electronic board is responsible for the set of lines and their switching. Therefore, these machines may have a practically unlimited functionality. It all depends on which programs laid the manufacturer.

The main thing, as I think, the difference between electronic sewing machines from mechanical in the fact that they need to bother with them. " Included the operation - she sews. Because some average width parameters and length lines are already laid in the machine's memory. No need to search in the instructions, what to put the length, the width ... God forbid also and the needle will be happy.

Electronic cars are "simpler", for example, Janome DC 50, Janome QC 2325, Janome 4030, Elna 6200, New Home 8330. Such have a great set of basic working lines, several types of loops, decorative lines they have enough of them.

"More complied with" - machines such as Janome DC 3600, MC 5200, various alphabets, many decorative lines, are programmed on the boards of these machines in addition to the basic working operations. Such machines are suitable for lovers not so much repair, how much to decorate clothes, engage in Pechvoric and Quilting. Handkerchings, napkins decorate ...

"Focused" are machines that have not only an excellent set of lines, but also with all sorts of electronic approaches that simplify sewing. For example, "Choose the tissue density" ... ". Put any such needles" ... "And I will put the pressure of the foot automatically." Such machines most often make European manufacturers like ELNA 7300 PRO, ELNA 740 Excellence. Very nice, but also expensive by itself.

"Embroidery" are cars that, so it will not be a surprise for you, not only sew, but also embroider. You carry out the designs on the flash drive, which then turn out to be on the fabric. All that is required from you is to change threads. This, for example, the machine Janome 350e, Elna 820, Elna 9900 (embroidery) or Elna 8600 (Sewing-High). There are still a lot. I just like these.

IN electronic machines Do not pay attention to power. They have an electronic puncture amplifier needle. Therefore, if anything, it will help to treat dense tissue.

And the choice should be done in your needs. But do not forget that they can change for those 5-10 years that you will use the purchased machine. Probably makes sense to exit planned expenses on a thing that has several large functionality and potential to meet your ideas (even if they occur only in the future).

From a number of such things. No, of course, this model was produced in Czechoslovakia, even in large quantities ... But: with Russian font it does not occur and, it seems, it was not released at Cyrillic. It is important to understand that models of typewriters were produced very much, and with the Russian alphabet of the total number only a quarter, if not less. It is especially disappointing when incredibly beautiful samples were not supplied to the USSR and were not made with Russian font, as they were focused only on the domestic market of European countries or the United States.

Initially, my Consul wrote in Finnish, and my Friend of Finland gave me this typewriter. And it was so he was like every "iNoyazy" typewriter entering my collection, I rubbed my hands, I look like a writing device that could be Russified because I think that at least half of all samples from my meeting should write Russian.

The photo is that typewriter who entered my collection: Tori.fi

To implement the adventure by reworking the machine, you need to replace not only the font, but also the keys, and for this you need to get the right technical informationTo make a "new" thing close to the original, or even the coinciding with him.

To do this, it is necessary to find out whether the plant has not been released by other models of the same brand with Russian font. If you are lucky, it may be that the details we need will be identical or quite suitable. Soon I found a "donor" in Moscow: they became strongly worn Consul 235 - such a machine is just found with Russian font. I intercepted her at my request collector Denis Bukin, for which he was once again greatest. The keys will coincide with 100%, there was no doubt, but I spent the assessment of the comparability of the literal levers only by photo, carefully considered the design of the segment and the location of the stops (special protrusions) on the grade levers.
After the machine arrived in Petersburg,
the result was not forced to wait. Immediately began operation.

That's what remains from Consul 235,
which I managed to photograph before disposal:

Having spent a couple of hours, I dragged the listers from one typewriter to another.
And everything came out. Including keys.

And now how not to be proud of such a typewriter! It is light and small, while reliable - the housing is made of metal, and the design is simply cosmic. And she writes in Russian!
It is important to warn immediately: the decision to rearrange the literal levers from the machine even the same model, but released in different years, can turn into fiasco: for example, for example, the manufacturer brought minor changes to the design of the segment or the form of the grade lever. So if you want to go to such experiments, you need to take these risks and hope for luck. Consul 231.2 - not the only machine that I had to make writing in Russian. Sometimes it is necessary to Russify and those who, although they were produced on Cyrillic, were terribly preserved: in the USSR, the machines were exploited to an incredible separation of mechanisms, and in the West they are not very bold, just much more often bought new models for replacing old. Therefore, it is often easier to take a "foreign language" and put the Russian font. So it appeared in my collection another fantastic wrench Royal Standard 10.

True, for her Russification, I did not drag the levers, and turned the pads from the typewriter. I will tell about the reasons for such a decision in a separate review.
And there are such machines when comparable parts are not found for Russification. For example, beauty Antares Annabella. This typewriter in the 1960s released a small factory Antares S.P.A. in Milan. The company manufactured a whole series of models under the brand name Antares, but never such devices did not go with the Russian alphabet. And this is understandable: the whole world, including the USSR, supplied with cars in all languages \u200b\u200bits invincible competitor from Italy.

However, one of the thousands of such writes in Russian. And she already enjoyed in direct appointment. I ordered such a typewriter at the end of last year. What decision was made for its Russification, I will not tell. The secret of the exclusivity of roads.

Stages of working operations when Russification of Antares Annabella:
the removal and set of keys

I will only say that in order for it to write in Russian, they needed as many as two donors, which were delivered from the Siberian regions of Russia, and the print pads were not needed, but concave.

PS. The Riga collector notes such a tendency: European collectors of the machine, produced not in their state, wish to get with the alphabet of the language, which speak the country-producer. That is, if they need a "Moscow" machine, then it must be written on Cyrillic. In Russia, declare with full responsibility, this rule does not work. We want to write in your native language, but preferably on some special, exotic typewriter. And it is clear to me and close. The reason is set out in the first paragraph of the article. And more: well soldered into Russian font "Initial" machine for us is a real holiday. And rarely, who will indignant that someone has abused the original and insulted the feelings of connoisseurs of "original". And if I'm wrong, I am ready to listen to any other, erroneous opinion.

In essence, any, even the simplest sewing machine can help you in creating a masterpiece. In the end, the era of the Great Couturiers fell on the second half of the XIX - the beginning of the 20th century, when the sewing machines only entered the use of and were quite simple. There was no speech about computer control or about the electric drive, but it was in those days that such great masters lived and worked, as Charles Vort, Elsa Skiaparelli and Coco Chanel.

At the same time, it is stupid to deny that a good and correctly selected sewing machine saves the time, strength and nerves of the master. How to make a sure choice, do not get lost in a huge number of firms and models, choose from the list of functions what you need, and not pay extra?

Let's try to figure out. To begin with, decide exactly - for what you need a machine at all. You just want to have it at hand, so that there was an opportunity to independently shorten too long trousers, not running every time in the atelier, to sew a cuckored jacket and pick up a new chart, and are unlikely to get something more? Maybe there is a desire to sew carnival costumes to children - or are you upgoing close to your wardrobe? If you are going to sew, then what? Summer dresses from light fabrics, or coat and severe jeans? Or maybe mostly configured for knitwear? Deciding, you can proceed to the choice of the model optimal for your purposes.

We define the items for which the choice is to be made. First, it is a manufacturer, secondly, the type of sewing machine, and thirdly - the required set of functions that will determine the specific model. Let's start with the first.

⇡ Manufacturer Firm

Here, as in any other area, there are market leaders and little-known firms.

The most famous - Minerva, Bernina, Janome, Pfaff, Brother, Singer, Husqvarna. The choice among the leading manufacturers is largely determined by personal preferences, the presence of the machine and additional accessories to them in the store selection store. You should also take into account the availability of service centers at the place of your stay - with a large "run" of the machine, this factor begins to play a considerable role.

With less well-known firms, everything is not so unambiguous. Often, with the same set of functions, the machine of an unknown company is experiencing less. But, in addition to the obvious risk, get the worst quality, here you can stumble upon another underwater stone: difficulties with the acquisition of additional paws and components. Low-known firms often occur very exotic foot mounts or bobbin size. Therefore, if you still decide to save, be sure to find out what accessories are suitable for this model, and whether you have the opportunity to purchase them without unnecessary trouble and overpayments.

⇡ Types of sewing machines

All sewing machines are divided into industrial and domestic ones. Usually, the household is able to immediately many things, and the industrial one is one thing - but this one is one thing. It can be very good and whole days, years, kilometers - without breaking. At least as follows.

However, industrial cars are hardly interested, unless you intend to open a small sewing enterprise, are very expensive, bulky and noisy in work - so that this material will concentrate on domestic ones. Household cars are divided into:

• electromechanical,
• computer,
• sewing and embroidery
• embroidery
• overlocks
• dispenser
• crowlocks.

What does it all mean, and what category to stop the choice?

1. Electromechanical sewing machines - The simplest one. The entire inner filling of such a machine - mechanics, that is, levers, trees and gears. Electric is only the engine, leading it all in motion.

• 32 types of lines
• loop semiautomat
• vertical shuttle
• stitch length 4 mm
• stitch width 5 mm

Of the undoubted advantages of this type - reliability, low price, inexpensive repairs in the event of a breakdown. Conventional electromechanical machines are inferior to a computer in the speed of operation and the number of functions, since the technological features of the design do not allow the lines of a complex shape, but they perfectly fit beginner seams, or those who want to have a reliable assistant for small household needs. However, the coat, and jeans, and a bald dress of a good and properly adjusted electromechanical typewriter. Approximate price category of such machines - 3-5 thousand rubles. Just available, reliable.

2. Computer sewing machines They are distinguished by the presence of a computer board that implements the overall management of the process, which allows this type of machine to perform fairly intricate lines programs. Moving the needle relative to the tissue is controlled by a microprocessor. From the amount of memory and the number of programs of this machine "brain" and depends on what a particular model can.

• 197 types of operations
• loop automatic
• horizontal shuttle
• stitch length 4.5 mm
• stitch width 7 mm

Their starting price is about two or three times higher than the price on electromechanical. At first glance, an undoubted advantage seems a huge number of types of lines. This is 15 species of different loops, and chains of different flower-leaf, and a dozen overclocking lines, and knitted seams. But the look carefully at this list and think what of them do you personally really use? It turns out that part of you are not needed at all, and another part is numerous dubs of the same with small deviations.

Personally, I regularly use a six-family of 56 lines that are in my car, and two more from time to time. However, it is impossible not to notice that this is already greatly expanding my capabilities, in comparison with the work on an electromechanical sewing machine. So you should not be seduced by excess functions - it is not a fact that they all need you. Rather, the fact that many of them are unlikely to ever try on.

Useful in the work will be several types of overclocking lines, knitted seam, triple enhanced lines, knitted loop and loop with eye - in addition to the usual loop, of course. The rest of the functions are at your discretion, just do not let this variety exist you head. It's a shame to pay extra money for anything you will not use.

The undoubted advantage of a well-established computer typewriter is the speed and accuracy of work. If your plans appear roller kilometers and sewing to order for 8 hours a day - a computer machine will significantly save you time and give extra opportunities for creativity. The loop with the eye is of course a trifle, but this trifle affects the whole view of the coat.

Of the minuses - a high price, capriciousness in the setting, and repair, in which case, more expensive.

3. Sewing and embroidery and embroidery machines. Everything is simple, unlike industrial embroidery machines, which can actually, only embroider, such combines often combine two functions in themselves.

On my personal opinion, the budget versions of the sewing and embroidery machines combine these functions from the hands of Won badly. They are too capricious compared to conventional sewing, and compared to full embroidery - too limited in embroidery. And more expensive models also frighten the price. Therefore, I recommend considering this class machine exclusively as embroidery and acquire based on these purposes.

Also, you should not think that by purchasing an embroidery car for 100 - 300 thousand, you will immediately create a masterpiece. Embroidery on the sewing machine is also an art to learn. On courses or independently, on books or Internet lessons. In general, the work on it something reminds work in Photoshop. You can go to a specialized site, to score with someone drawn motives, quickly read the instructions and glue them together as it turns out by adding stamp of stars and hearts. But if you look at the masterpieces created by professionals - it becomes clear that it is not even a third of the possibilities of this tool.

So, think well, do you need it, and honestly, in most cases it is much easier and incomparably cheaper to book an embroidery in the workshop in which there are already serious equipment and a good master. Outsourcing is our all. Personally, I usually do this.

4. Split sewing machines. They are - playful cars.

Designed to perform an elastic flat seam used to close the closure of the edge of the knitwear. All this complex verbal design denotes that seam that you can see on the subsidence and the sleeves of almost any T-shirt.

Among household machines Flat seams can perform two types of them: plays and crops. The usual seam looks the same and from the front side, and from the inside, since the upper thread will be burned around the bottom (bobbin) and is delayed. Flat or chain seam looks different. It is obtained while simultaneously work two and more needles and loopers.

This type of sewing machine is designed to work with elastic "stretch" fabrics. If your main goal is T-shirts, swimwear and sports costumes are your choice. Price category from 10-15 thousand.

5. Overlock - This is a machine with one or two needles, equipped with a trimming mechanism and intended for the sections of a variety of sewing products. When choosing an overlock, first of all, it is necessary to focus on convenience while refueling and sewing. We should also not forget about the possibility of marking with different amounts of threads. Most of the overlocks perform the 3rd and 4th voyage, suitable for most types of tissues and role-playing edges. On higher-end overlocks there is a 2-dimensional mark, designed for the finest tissues - such as silk or chiffon, is also to perform decorative finishes.

In principle, there are overlocked functions in computer sewing machines. But the seam made on the present Overlock is much more accurate and reliable. In addition, Overlock is equipped with knives, which themselves cut off the intercourse, aligning the edge, which significantly saves time. In general, if you sew regularly, and free space you can accommodate two aggregates - Overlock will be a very useful acquisition, if not - you can do without it. In any case, it does not replace the sewing machine, but only complements it. It is not intended for assembling parts items. The price of overlock starts from 6 - 7 thousand, for 10 you can buy a completely decent model.

6. Kurlelock - relatively new invention with which many are not particularly familiar. This name came up with PFAFF marketers for their own series of such cars and patented it, after which it firmly included in everyday life. It combines the word "Overlock" and the English term of Coverstitch, that is, the "covering" or "closing" stitch. This machine can perform both sewing products and flat seams and a direct chain line, that is, combines overwhelms and a flat car. The price of croquilok is quite high and starts from 25-30 thousand.

Like a sewing sewing machine, the koverlock is designed to work with knitwear. The design also assumes the presence of several (from 2 to 10) upper threads and loopers, with which you can create various, sometimes very complex seams that are not distinguishable from industrial.

What to choose to work with knitwear - Covers or a pair of overlock plus a displeasure machine? On the one hand, it has a greater number of loopers, which allows you to perform more complex seams, it takes much less place, and its high price is quite comparable to the total cost of the decaying and overlock. And on the other, when processing the sewing item, Overlock may be required, then flat seam, again overlock, again flat seam and so every five minutes.

In the case of two machines, this will not submit any difficulty, and the Coverlock each time will have to be removed from the flat seam to the revision or rapid and revision and back. And this is a rather long and painstaking process, which even in the presence of skill takes a few minutes. It is more convenient to decide.

⇡ The capabilities of the model

This question is most acute when choosing a specific model of a computer sewing machine. It is this type of machine that the number of lines frequently translates over two hundred and causes ripples in the eyes and dizziness. You need to start your choice at all from the number of lines. There is more important parametersWith which you should decide first.

1. Type type, to work with which the machine is intended. There are machines for working with any types of fabrics, there are models intended for light and medium, or vice versa, for medium and heavy tissues. If you definitely know that the main area of \u200b\u200byour activity will be, for example, dance dresses of silk and chiffon - take the machine for light fabrics, it will work with them better than universal. If your choice is coats and jeans, consider models for medium and heavy tissues. Usually they have more gap between the paw and the needle plate, which allows you to put a fastest layer of fabric under the paw, and more powerful motorwhich can flash this layer.

2. The maximum stitch length (it takes up to 5 mm) and the maximum width of the zigzag (up to 7 mm). What these parameters are more - the better: expands the field of features.

3. Type of shuttle: The shuttle is vertical, with a removable bunk cap, as well as horizontal, where the bobbing cap is missing. The second option is modern and more reliable - it is less details that can break.

4. The loop can be automatic and semi-automatic. "Full" automatic allows you to perform up to 7 different species The loops, in one operation, take out the loop exactly under the size of the buttons, remember the size and repeat the idle of the identical size you want the number of times.

Auto Loop Foot

Semi-automatic loop usually perform more simple models. Here the size determines you, focusing on the markup on the foot, the loop is cooled in 4 consecutive operations. It is easy and not even for quite a long time, but if you multiply by 10, 20, 30 buttons on the costume - the difference is decent.

Semi-automatic paw

5. Not binding, but very convenient features are a built-in threader, the possibility of sewing a double needle, the needle positioning button and a point pinch button. If you are going to sew a little, it is worth paying attention to the possibility of working without pedal and external speed adjustment, it is very protecting your foot, which four to five hours of continuous pressing on the pedal begins to complain, besides, pedals fail faster than the machines themselves, And they do it, as a rule, at the most inopportune moment.

⇡ Additional accessories

The possibilities of the machine you purchased in the basic configuration are far from the limit. Accessories play a huge role as a result and speed of achievement. The fact is that for a qualitative result it is very important to choose the right foot, a needle and thread for each tissue and operation. The table of the ratio of the thickness of the needle and thread is in the instructions for a sewing machine - and then you are unlikely to be wrong.

But in addition, for difficult tissues there are special needles - for example, they will need to work with leather, denim, stretch tissues and jersey. Various sharpening of the island allows them to work most accurately with the material for which they are intended. Very often there are situations when the beginner of the seamstress scolds the typewriter for passing stitches or another seam marriage, and the case is only in the wrong choice of needle.

The paws also have a huge variety. On one of the largest Russian-speaking forums dedicated to needlework, the topic about various paws takes more than 200 pages and is regularly replenished. At the same time B. basic complete set Enters only the minimum. And here it begins to play the role of the original choice of typewriters - your opportunities will eventually persist in how easy you can get additional paws.

5. Foot for sewing, beads and sequins.

And one hundred and hundreds of fees, nozzles and devices designed to take on what was previously possible to make only manually. Easy your work and turn sewing into a fascinating process.

⇡ TOTAL

Of course, this is not all that can be said about sewing machines. With apparent similarity, each model may have nuances and subtleties that will make it most suitable, or vice versa, unacceptable, for you personally. Convenience of refueling the threads, the location of the buttons and control levers, the sound when working, the type of light bulb and also, and more.

Ideally, it is worth walking to the demo hall of a large store and sit at different models, fill the threads, flash a trial line, trying how it will be, and whether it will be convenient for you. If there is no such possibility, or you have a catastrophic time for it - wait for the following issues. I will do it for you and share the impressions as in detail as soon as I can.

Modern sewing machines have long been no longer like their antique analogs external speciesNight increased functionality. We present the ranking of the best popular in 2018-2019. Sewing machines for home - according to customer reviews and experts.

The assortment presented in the stores is so wide that it is advisable to submit to purchase in advance which criteria are distinguished by the proposed models.

Criteria for choosing a good sewing machine

Management type It may be mechanical, electromechanical and computers depending on the method of building a line. Electromechanical, as a rule, are not too expensive and are intended for irregular home use, while electronic analogs are more suitable for those who sews often (for example, to order). For the pros, it is better to choose a sewing machine on computer control, in which the embroidery module is often present.

Type of shuttle device It is represented by a vertical or horizontal shuttle, while the last option is most often characteristic of professional, complex models and creates much less noise.

Functionality The sewing machine is determined by the number of possible operations, which includes the variety of types of lines, and methods of performing a loop, and additional embroidery capabilities.

Equipment Each model directly depends on the previous criterion. In different models, additional needles for tissue of different density, replaceable paws, as well as tools for servicing the sewing machine can be attached. It is desirable that the machine possesses a special compartment for storing all sewing accessories.

Sewing car Which company is better?

Undoubted leaders for the release of sewing machines are deservedly considered as European manufacturers - Bernina, Pfaff, Husqvarnaand asian firms - Janome, Brother, Juki, Jaguar. The products of the American brand are appreciated Singer.. At the same time, each company regularly improves its models, not yielding to competitors as an assembly.

The most popular inexpensive sewing machines are now - all the same models from the Japanese company Janome. (Production is located in Japan, Taiwan and Thailand). The assortment of this company has many models for both beginner masters and for infrequent home use and professionals. Bivels a large number positive feedback About the machines of this company - both from craftsmen and specialists and masters of service centers. To her heels in popularity in Russia comes one more japanese company - Brother.. For regular sewing masters, still recommend choosing from Janome - in the design of these machines more metal parts, they are more reliable.

The masters advise when buying paying attention to the weight of the machine - the harder, the more inside the metal parts.

For home, for irregular use, you can choose between Janome and Brother - according to the principle - what will appear on the presence of the necessary functions. Sometimes a small weight can even be an advantage - it is easier to get and return to the place of storage.

Concerning Singer. "So in 1851, they put the first sewing machine for sale in 1851 (she cost $ 100), they won the market and hold it for one and a half century. Quality tested by time. Deserves respect! (By the way, the Podolsk sewing machine has been popular with our moms and grandmothers at the factory previously owned by Singer).

But on modern market The Japanese are unambiguously leading (among the domestic - Janome and Brother, among more professional models - Janome, Juki, Swiss Bernina). Among these manufacturers are better and make a choice.