Tuning Kia LED: how to make a good car excellent. Kia LED: wheel insulation wheeled arches Tuning appearance

the main / Driving

Car Korean autoconecern Kia Ceed Enjoy in our country in high demand and popularity. Users appreciated the high reliability, efficiency and practicality of the machine, the excellent manageability and the possibility of many maintenance operations and fine repair.

Appeal to professionals

Undoubtedly, complex types of maintenance and repair of the machine, such as engine repair, commissioning fuel equipment etc., it is recommended to perform in specialized auto repair shops. Experienced auto mechanics not only will quickly identify the reasons kIA faults Ceed, but also repair with a guarantee of quality.

Work for the soul

Many types of Kiya LED faults can be performed independently. All that is needed for this - a little experience, the desire to learn how to repair and maintain a car in good condition yourself and, of course, our useful tips, recommendations and step-by-step instructions.

Attempts to eliminate deviations in the work of the car do it yourself - this is important and useful. The driver who can eliminate small (and not very) malfunctions is more confidently leading the car. Understands the rules of behavior on the road and knows all the features of his "iron horse". For example, a malfunction: A red airbag light bulb caught fire on Kia Ceed. It seems uniquely - problems with electronics, perhaps an error, failure in software. Are many car owners, are able to diagnose electrical equipment, electronic filling of a modern car? In fact, not all scary. Try to check all the contacts, try to prove the wiring, carefully examine it. In the overwhelming majority of cases, the problem in a weakened contact is worth fastening it, as it should, and there are no more problems!

Care of the engine power system air

Kia Ceed problems associated with any breakdowns or malfunctions, like other cars, can be quite a lot. They can also appear in any nodes and car systems. As a rule, they are minor, therefore, most of the work to eliminate such faults is performed independently. Including such a simple and understandable job as the replacement of the air filter. It is important to maintain a system in cleanliness and health, and for this it follows at least 1 time per year (or 10,000 km) to change the filter installed under the hood of the car. Work is performed in several steps:

open the hood of the car and put it with the lock

disconnect the latch mounting of the air filter housing cover
extract an old shift filter
make sure that there is no dust, sand and dirt inside the case, if necessary, remove everything with the help of a car vacuum cleaner and wipe slightly wet rag
set new filter And close the lid, securely fixing it with the help of latches.

Many other problems in Kiya LED are solved in the same way, easily, quickly and consistently, step by step.

Catalyst problems - In danger, the engine

Catalyst - an important constructive element of a modern car. In the overwhelming majority of "Koreans" there is no problems. But sometimes the unit fails, prematurely collapses, which leads to serious consequences, if it is not possible to diagnose in a timely manner and not to evaluate the importance of quality repairs. If the problems on KIA CEED in the catalyst, try to replace it on your own, but it will take a specially equipped boxing, a garage with a lift or pit. Replacing the catalyst and repair of Kiya LED with their own hands is carried out in the following sequence:

we put the car in the garage and give the engine to cool (on average 1.5 - 2 hours)
raise 1.5 - 1.8 meters up
remove Carter's defense

remove the fastening bolts of the receiving pipe to the graduation collector
lower the car to the ground level
we will unschedule the top heat shield, for which we unscrew 3 bolts

we remove the lower protection against splashes that keeps on 4 bolts M-10.

disconnect the intake manifold
after that, you can remove the catalyst, everything is cleaned and installed instead of a faulty new item.

Yes, the assembly of the exhaust gas removal system is made in the reverse order. We recommend paying attention to the tightening of all threaded connections. If possible, all bolts and nuts better place new ones. Not so expensive it will cost.

In fact, repair with your own hands is not only the opportunity to save money, but in many parameters - a guarantee of quality repair. We will not open the secret if we say that the car mechanic conducted for a service station or repair of your car is an uninterested person. And it is unlikely that it will be carefully and scrupulously to take each detail. The work is paid on the normal clock, time is strictly limited.

Significant assistance in maintaining the vehicle in excellent technical condition will provide on KIA CEED repair manual. The book in detail and professionally tells about the device of the car, the main technical parameters, the rules of service and the main stages of the car repair. Repair manual and operation kia. Ceed is not included when selling a car, but buy a book now is not a problem. Edition, regularly updated can always be found on the shelves of specialized and ordinary bookstores in the relevant sections.

By purchasing KIA CEED JD repair manual, make sure that the specified here technical specifications and constructive features correspond to the brand and model of your car.

The most common car malfunctions

Their little, in general, Ceed is reliable modern car. KIA CEED 2010 repair manual can help perform the following types. repair work With your own hands, without addressing the service of car service:

replacement brake shoes
oil change and oil filter
replacing burned headlights, overall lights, fog, lanterns of numbered signs, etc.

replacing the spark plugs, if necessary - high-voltage wiring
purge or replacement fuel filter Thin cleaning
head adjustment

If there are special pullers and keys, you can change the springs of the suspension, shock absorbers and perform a number of other important types of work. Instructions for repair kia ceed At the initial stage, it will be a reliable assistant in mastering the difficult, but such an important profession is a personal auto mechanic for your Kiya LED.

Before improving the improvement of Kia LEDs, it is worth a predeterpatch with those parts of the wagon, which, in your opinion, require refinement. No matter what your model is GT, JD, SW, SW or Pro, it is best if the machine's upgrades starts with chip tuning. So you will save your time and a considerable amount of money that could spend on others, not such effective events. What other methods will help transform Ceed - let's figure it out together.

1

To perform chip tuning korean Universal, you need to know exactly the year of its release. Models CEED SW, JD, PRO and high-speed GT from Kia are among those cars that are not suitable for flashing.

For the ECU model Ceed in the SW configuration, the utilities from Bosch, Keihin and some other manufacturers in 2010-2016 are suitable. Next it is necessary to deal with the year of the release of the wagon itself. CEED SW, issued from 2008 to 2009, can be flaught by utilities from Keihin 2010-2013. The same models, but already released in 2012, are suitable for chip tuning using Bosch 2014-2016 programs. KIA, which came up with a conveyor in 2013-2014, are amenable to flashing utilities from both Keihin and Bosch, "covered" in 2015-2016. You can also take advantage of the latest Utilities January 7.3. The main thing is that the firmware for Kia was released no earlier than 2013.

Analog SW, model Ceed in the configuration JD is not so capricious in the selection of firmware. Here everything is easier - cars 2008-2009 in. Shed off utilities from Keihin, Bosch, January and Siemens 2009-2010. If your universal was released after 2009, then to achieve best result After chip tuning, we advise you to take advantage of the bosch utilities exclusively. They are designed for DDR 2 memory, which are equipped with JD models. In addition, these firmware are considered optimal option For multichannel ECUs that began to install in CEED SW, JD and PRO after 2008.

More high-speed versions of Pro and GT are well amenable to flashing with Utilities January 7.2 and Bosch. If your Pro Ceed was released in 2008-2011, then use for its chip tuning by Bosch 2013. If you have a model released in 2012-2014, then look for the firmware from the same manufacturer, but already 2015 with the mark. SAMI powerful version GT from Kia requires the search for the newest utilities. Regardless of the year of release, its chip tuning is performed by licensed firmware January 7.2 exclusively 2014-2016.

Refracting of the Korean Universal ECU

In addition to the firmware, it will require a certain inventory. For the best result, all your purchased equipment should be original. We really do not advise you to use Chinese products, otherwise you will not only be able to fully reveal the potential of your wagon, but also the risk of worsening the existing indicators. So, for work we will need:

K-line adapter;
cOMBILOADER bootloader;
laptop with Windows XP;
additional USB adapters.

First of all, it is necessary to remove the protective bar under the steering wheel Ceed. Behind it is the control unit of the station wagon, it is not necessary to pull it. Immediately proceed to install software. Chip tuning should be carried out exclusively on a computer with installed Windows XP, since the other OS is not suitable for flashing the block. A file with a new utility for installation on the ECU should already be on the hard drive. We need to install the original package COMBILOADER boot. After that, connect the ECU to the laptop. This is done using the K-Line adapter. The first connector is connected through the adapter to the laptop, and the second, also with the adapter, connects to the LED block.

Once you have connected the equipment, you need to start the car and wait, when the computer will "see" the data of the ECU Kia. The display shows a folder with information that you want to open and find a file with extension.bin. We leave the folder open and copy a new firmware into it. We agree with the replacement, and at this point must work the package loader. His role in chip tuning is that it should help you determine optimal parameters For each of the CEED systems. This is done using the visualization of settings, that is, you can see how it was before and how it will be after the KIA flashing. As soon as you configure the parameters of your KIA systems, you must agree with the change warning and continue to replace the software on the block.

After 10 minutes of Pak, the bootloader will notify you about the completion of the utility installation. Thus, we have completed the execution of chip tuning, resulting in increased power KIA by 30-40 liters. from. The car has increased greatly in dynamics, and it will be noticeable from the first revolutions of the engine. The result was reduced overclocking time by 1.5 s. CEED fuel consumption decreased by 0.6-1.2 l / 100 km - everything depends on the model. In addition, if before you noticed the failures when switching transmissions, then after chip tuning, this problem will no longer arise. At least in the coming year.

2

The latest LED models are equipped with almost everything necessary for comfortable driving. Owners of such KIA in most cases are resorted to tuning by installing video recorders, less often - replacement of the standard car radio with the mounting of the amplifier. In addition, you can finalize the auto element with an integrated chamber and parking sensors. As a result of such an improvement, KIA has become much easier, especially in close urban alleys and parking lots.

Early LED models, released in 2008-2009, require more cardinal compatibility of the cabin. For example, the GT and Pro Ceed models from KIA are equipped with low-quality instrument panels paint and varnish coatingwhich, with regular operation, the car very quickly cracks and hinds. In order to eliminate this problem for a long time, you can cover the flap with a modern composition, which will hide all the defects of the element, and at the same time will make the interior of the car in 2009 original.

To work, we advise you to buy the composition that is suitable for applying plastic. It is best to look for such paint in auto shops. Included with paint, you need to purchase a special varnish. Although many motorists consider it optional, the lacquer will still protect the painted flap of KIA from damage and chips. In addition to paint and varnish, it will also be necessary to prepare for work:

scotch-Bright for cleaning the KIA panel from dust and dirt;
acetone or White Spirit;
kraspopult, if you bought paint not in a canoe;
primer to work with plastic.

Paint for plastic in kia car Ceed

Initially, you need to put the car on a flat surface and bring the handbrake into the working position. We disconnect the terminals from the LED battery and remove the decorative lining of the shield. Pull the plugs and dismantle the steering wheel Kia.. We unscrew the upper and lower screws and neatly pull the instrument panel on yourself. Slowly turn off the wiring, previously photographed the initial connection of the wires. So you are not confused when they are connected.

Fully shot of the Kia shield should be placed on the old towel, on the floor or table. The surface on which work will be working on LED shield must be wet to avoid dust from entering the part. Carefully my shield Kia GT, after which we leave it to dry. Next, sand the surface of the scotch-bright detail, we clean from dust and degrease. The next stage will apply primer. Next, you can proceed to applying paint.

If you have purchased a paint in a bank, then before pouring it into the paintopult, you need to add to the composition of the solvent in proportion 1: 1. Next, overflow the finished paint into the tank of the collapse and start painting. Keep the sprayer is not closer than at a distance of 15 cm from the surface of the LED panel. Next to keep the device is also not worth it, as the paint clutch does not occur with the surface. During the applying of each of the layers, spend the paintopult from left to right. Try to apply strokes with thin uniform layers.

After painting it is necessary to apply polyurethane varnish. It will help protect the Kia GT flap coating from fast abrasion and mechanical damage. After drying, varnish can be started to install the panel.

3

One of the biggest LED flaws is the dull lighting of the road. Eliminate this problem by replacing the basic lanterns of the universal details from Kia Cerato. . The optics of this model has a high luminescence intensity, due to which illuminates the larger area of \u200b\u200bthe road.

At the beginning of the tuning, it is necessary to turn off the terminals from the Kia battery and remove the protective pad on the front optics. Next, remove the headlight and mine it. Heat the emitter with a hairdryer to separate the main lamp from other components of the KIA emitter. We postpone the standard lighting element and proceed to the installation of a new spare part. First, they degrease the side walls of the illuminator, after which we applied glue on them. We apply the remaining parts from the headlight to the light from the headlight and keep in such a position about 2 minutes.

New headlights kia forces

Next, we put a headlight on a flat surface and put on it a small weight weighing no more than 1 kg. We leave the optics in this position for a day, after which you can install it on the wagon. To do this, we wake the wiring into the hole and remove from the side space. We connect the head to the Kia battery and check the operation of the emitter. If you are all done correctly, then notice how much the lighting of the road has become new lanterns.

Another option of tuning already updated Korean station wagon will be. For this, a special film is best suited. It is more durable paint, moreover, in the case of a strike, the broken glass headlamps will hold together. For tuning, you need to find a special anti-growing film. It differs from tinting for glass windows with its composition. Such a film is not terrible to enter small stones and garbage.

Before applying toning, you need to remove LED optics. Moy and degrease the headlight, after which we leave to dry it. Next, spray the radiator KIA and prepare tinting. Pour the film from the paper substrate and moisturize the product with warm water. After that, it will remain gently attach a tint to the spotlight and smoothing it with a spatula until you get rid of the folds and air bubbles under the film. At the end, we install the ready-made headlight on Kia and perform a similar operation with the second front LED flashlight.

Kia LED is modern korean car, on domestic car market He began to be delivered relatively recently, in a short time gained popularity. However, each car, sooner or later, needs to be repaired.

For example, to change air filter, you need to slightly raise the top of the protective case. Next, we raise the filter itself. At the bottom of the filter housing, a different garbage accumulates. All this collect in one pile and remove the cloth, then set the filter to your regular place.

As for the air conditioner, its repair is usually reduced to replacing the belt. Gently turn the tension device bolt and adjusting bolt. We change the old belt to the new and tighten all the bolts to the place. It is recommended to note in advance for yourself exactly how the old belt was held, otherwise it would just cut.

Suppose you have burned the lamp on your car, what to do? Need to change. We buy all the necessary materials in the store and begin work. But it is not as simple as it seems at first glance. Only a department is available in the left headla far Light. To get to the home light, we need to remove rechargeable battery. To change the lamp in the turn signals, you need to remove the headlight, carefully unhand the bumper, pull out the terminal basement and replace. IN right side There are no such difficulties, the only moment - expansion tankit will need to remove it.

With lamps rear Lights Everything is much easier. You can get to them through the hatches that are available in the sidewalls of the luggage compartment. Stop signal lamps change without any problems.

Let us turn to the replacement of PTF. First of all, unscrew the core, which consists of three pistons, then pull out the pistons and clamping the liner down to seize the lamp cartridge. Cartridges have limited wire length, it delivers additional difficulties. In this case, a jack can help.

We will replace the coolant in the radiator. If you have the need to replace the coolant, then you need to find a small crane on the radiator. Opening the crane and drain the used liquid, instead of it fill a new one.

Change brake pads. We purchase all parts that will be needed to replace the KIA LED brake pads, then we spin the bolt of the lower guide, then pull out the block by turning the calipers to the top. In order to replace brake disk, unscrew the bolts that fasten it to the hub. Solving the bracket and only after that remove the brake disc. Rear disc Drum is dismantled by unloading the suspension lever. Reverse fasteners are made after removal from the jack.

Replacing the engine oil. We launch the power unit and wait for five minutes until it gets warm. It is done in order to the oil glass into the pallet. Next, take the dipstick, wipe it and look at the oil level. If it is below the level "L", then you need to add oils.

Kia LED Noise Isolation

At Kia LED, noise insulation is also carried out often, as well as on domestic cars, despite the modernity, reliability and comfort of Korean. The level of the "Shumkov" plant leaves much to be desired. From the article you will learn how noise isolation wheel arches car.

Standard noise insulation "Korean" and its disadvantages

It is enough to disperse the "Korean" up to 80 km / h, how to communicate with passengers it becomes completely uncomfortable. And music, it is generally a separate conversation. Melomanany - in the bayonets, lovers to listen to something, too, with time from such a sound, feel this stress.

Yes, and that there, who knows about these problems with "Shumkov", leaves an old media system what it is, as it understands the uselessness of her replacement. Naive owners buy expensive acoustics in the hope of changing something for the better, but, alas, there is no end to disappointment.

The lack of high-quality noise insulation allows external sounds to penetrate the salon. This is not only a raration of powerful power aggregate Under the hood, but also wind noise, rain drops, in one word, everything that can noise outside the window.

Such a scenario is forced to increase the volume of the AC, but this generates the resonant rattling of iron elements of the body, uncovered, very or partially "Shumkov".

Note. In particular, it can be the doors affecting, first of all, on the sound of the speaker system of the car. Or wheel arches, from which there is also a lot depends.

What is the cause of bad factory noise insulation of many cars

Today you can meet two categories of Kia owners:

The first extremely negatively belong to the very idea of \u200b\u200binterference in the salon of the car;
The second - love to experiment.

As a result, the first operate the car, despite the "heartbreaking" hum from the wheel arches, but the second is capable of significantly change the situation for the better.

Note. Especially often the situation with noise discomfort is felt in winter time. A rumble from "Robes" is added to the usual road noise, which carries his favorite car.

Not only kia, but also other, more eminent, manufacturers of cars try to solve the problem, but something they prevent them from implementing. As a rule, it is possible to explain this by the financial side of the question and the requirements of the ecology.

If you dig deeper, it becomes clear that the automaker puts the only task to sell the car with high operational characteristicsWhat implies low weight, low fuel consumption and good payback. And so, in the pursuit of a decline in mass primarily suffers from the "Shumka".

This situation has recently appears more often and more often. So, the more modern car driver, the less the manufacturer takes care of reliable noise insulation, entering into a competitive struggle with other autoconcens, caring only about how to attract the buyer.

On the other hand, the presence of good noise insulation at the factory level can act as a good competitive advantage, especially in the premium segment.

In a word, what to guess and understand. All the same car has already been bought. We must try to bring it back with your own hands. An elegant and effective solution in terms of increasing noise insulation is the processing of wheel arches KIA.

How does this procedure be held with your own hands

This will help, of course, to reduce the noise level in the interior from the wheels and the road surface several times.

So, the wheeled arches can be easily and simply insulated on their own, if you mount special sound-proof fixtures and install them on open areas of the bottom. No need to go anywhere, spend money on services in the service station, where the price clearly disappoint many. For such, it would seem, a simple operation, take a lot of money that under today's crisis is clearly reflected in the family budget.

This is what unique and powerful funds can be used with your own hands to increase the effect of noise repayment:

Assorted sheets of thick foil and bitumen;
Some vibration-ham (this may be, for example, bimash bombs with a sound-cutter);
Other ready-made solutions.

Two ways of holding "Shumkov" wheeled arches

As you know, the "Shumka" of the wheeled arches is carried out by the 2nd main ways:

The 1st implies the processing of the arches from the inside of the car. In this case, it is necessary to clean the surface to clean, and then degrease. The arch area is almost completely covered with noise insulator. One of the best shows itself a scheme of bimast + accent, but other options are also possible;
2nd option - insulation outside. Here you will have to try more, cleaning the surface of the arch. In addition, you have to take some details, everything is thoroughly cleaned from the anticorre and degrease. A more serious vibration hammer should be as a material, for example, Bimast Bombers.

The 2nd method of "Shumkov" wheeled arches will give the best effect, but there is a small difference concerning the appearance of a terrible enemy of metal - corrosion. Experts advise all other misconception areas to wonder the anticorrosive. It is desirable that it was a mastic.

Currently, one more good opportunity has appeared to carry out noise insulation using liquid modern means. It is also used outside. It is a mixture, like mastic or cannonal salary, but perfectly coping with all vibrations and absorbing third-party sounds.

Here are several useful SovietsHow to increase the efficiency of "Shumkov" wheeled arches outside:

Lockers or fenders at Kia LED are standing, but depending on the modification, the car run and the like they may need to be replaced. Put better plastic plastic;
Lockers must also be glued with noise insulating material (some vibration-pit, laid with innerwill provide good service);
Instead of full-time pistons, it is better to use galvanized self-tapping screws or other stainless steel fasteners (the sneakers are noticeably hidden after noise insulation and the pistons may not withstand).

"Shumka" rubber

Such a "Shumka" of the wheeled arches has long been loved by motorists.

Here is its advantages:

The composition is most practical, because it gives a big effect and can be used simultaneously with different additives, giving a dense and unusual layer;
The thick black mass is incredibly stable to the "racks" of temperatures, even if it comes to critical states;
It is not afraid of the effects of moisture or gravel, even if the car is at high speed;
Very effective not only for handling the arches, but also the bottom of the body of the car.

As for the technology of application:

Arches get rid of dirt;
The surfaces are cooked primer to appear the best adhesion;
We must wait until it dry, then apply the first layer of liquid rubber;
Now we need to wait for rubber drying.

Note. By the way, the process of polymerization of liquid rubber covers a variety of time. Important significance have the surrounding conditions. As for the application of the composition, it is better to do this with a sprayer or a large brush.

We continue:

Only making sure that the first layer is dry, the second is applied.

Liquid rubber will be perfectly working in a complex with traditional noise insulation. It perfectly fill all the gaps available on the arch. In addition to the main protection against noise, rubber insulation will protect body Kia. from corrosion and blows of small stones.

Council. Before carrying rubber insulation, it is recommended to cover the rest of the body parts and the part of the chassis. Thus, it will be possible to protect them from splashing.

As a result, the sound insulation of the wheeled arches carried out different ways, go a little money. It will be necessary to spend only on consumables and a couple of fasteners.

The price of such an operation in a hundred will cost at least 15 thousand rubles. High price Makes relevant performance of work with independent forces.

If there are problems in the implementation process, we recommend using photos and video materials. No less valuable information is also contained in other instructions posted on our website.