Nexia breakdown: what it is and how to measure it. Drying to nexia. Tabs on Nexia

Drying to nexia. What a rainer wheel drive on Daewoo Nexia

Daewoo Wheel Drive Nexia: Parameters

Alloy wheels are beautiful, effectively and original. It is impossible to say that on our roads it is very practical, although many owners of mass cars are thinking about putting a round sum in cast wheels for their only and unique. It is tempting, but before that you need to weigh and calculate. Drying wheels for our Daewoo Nexia - In this case, the number one question. First breakdown, and then design.

What is disks break?

The possibility of installing a disc on a car depends on the breakdown.

Each wheel disk is characterized by a mass of geometric values, which many have no idea about. In vain, because it is absolutely not enough to know the number of holes for the bolts and the diameter of the disk. A bunch of other parameters affect both safety and resource running, suspension and car tires. And here every proportion of a millimeter is important.

Disk break is a set of parameters that are built into a single geometric model or suitable for a particular car, or unacceptable for use on it.

Basic wheel drive parameters.

1. In the inches measuring the landing width of the disk.
2. Landing diameter. Also measured in inches.
3. The distance from the railway plane of the disc to the center of the tire. Designated.
4. The number of holes for fasteners and the diameter on which their center are located. Most often, this parameter is called, but this is not entirely true. The parameter is indicated as Pitch Cirkle Diameter or RSD.
5. The diameter of the board of the disc, the one that sits on the hub. DIA is indicated and measured in millimeters.

The PCD parameter depends on the distance between the centers of the adjacent holes and on their quantity.

What a breaking of Daewoo Nexia

To understand all this geometric compote, we will understand the examples with disks for non-zexia. As a rule, there are 13 and 14 inches with a diameter of 13 and 14 inches on the non-possible years of release. Here are their parameters:

• 13 / 5J PCD 4 × 100 ET 49 Dia 56.6
• 13 / 5.5J PCD 4 × 100 ET 49 DIA 56.6;
• 14 / 5.5J PCD 4 × 100 ET 49 Dia 56.6.

Stamped standard 13-inch disc for Nexia.

Now it becomes clear the marking of the standard disk of Nexia:

1. 13 and 14 - the diameter of the disk, is measured in inches.
2. 5.5j (5j) or just 5.5 (5) - the width of the disk in inches.
3. PCD 4x100 - four holes, the center of which are located on a diameter of 100 mm.
4. Et 49 - the distance from the railway plane of the disk to the center of the tire is 49 of our millimeters.
5. Landing diameter of the hub opening 56.6 mm.

Set of 14-inch wheels on Daewoo Nexia with standard breakdown.

Alternative options

This is a standard breakdown for Nexia with 13 and 14 disks. If you wish, you can put 15 inches wheels, if their parameters are as follows: 15 / 6.0J PCD 4 × 100 ET 40 DIA 56.6.

It is clear that there will be no comfortable ride on such wheels, but it looks very impressive. Note that in any case the PCD and DIA parameters remain unchanged. With the removal, the question is complex, since the parameter cannot but take into account the width of the disk. If the removal is too large with a large diameter and large width, rubber will inevitably get the liners and wheels. And vice versa - if the removal is insufficient, but the wheels are wide and large in diameter, when turning, we will reveal tires about the pendant details.

Proven replacements

Cast disc on DEU Nexia GM12 (copy of the original disk).

Verified replacement options for factory disks:

• 6JX14 4x100 ET45;
• 6JX15 4x100 ET45;
• 5JX15 4x100 ET45;
• 5JX16 4X100 ET45;
• 7JX15 4x100 ET45;
• 7JX16 4X100 ET45.

Naturally, the landing hub diameter DIA for everyone remains stable - it is 56.6.

Theoretically, there is the possibility of installing disks of another breaks through adapters, but is it worth doing?

Conclusion

Almost all wheeled disks are marked, but there are also those on which marks simply not. In such cases, we can calculate the breakdown themselves, having only a caliper and calculator at hand (for those who have a triple in mathematics).

There is a simplest formula for calculating PCD - B \u003d NX1,414, where it is PCD, N is the distance between the centers of two adjacent holes. Have a good choice, do not make mistakes with a breakdown and good all roads!

Video about choosing disks for Daewoo Nexia

DISOBER DISKS DEU NEXIA 2012 1.5 (80 LS, gasoline)

1. Dzboboltovka.ru.
2. Daewoo.
3. Nexia.
4. 1.5 (80 LS, gasoline)
5. 2012 G.V.

Find the Daewoo Nexia 2012 disc parameters, 1.5 (80 hp, gasoline).

Table of parameters and breaks of disks DEU model Nexia 1.5 (80 LS, gasoline) - 2012

• LZ (number of holes)
• ET (disk departure)
• Dia (hole diameter)

website

DISOBER DISKS DEU NEXIA 2011 1.6 (109 hp, gasoline)

1. Dzboboltovka.ru.
2. Daewoo.
3. Nexia.
4. 1.6 (109 hp, gasoline)
5. 2011 G.V.

Find DAEWOO NEXIA 2011 disk parameters, 1.6 (109 hp, gasoline).

Table of parameters and breaks of disks Daewoo Nexia 1.6 (109 LS, gasoline) - 2011

Disk drilling parameters, usually ring up:

• LZ (number of holes)
• PCD (circle diameter of hole centers)
• ET (disk departure)
• Dia (hole diameter)

razboltovka.ru.

DISOBLE DISOBERS DEU NEXIA 2009 1.6 (109 hp, gasoline)

1. Dzboboltovka.ru.
2. Daewoo.
3. Nexia.
4. 1.6 (109 hp, gasoline)
5. 2009 G.V.

Find the Daewoo Nexia 2009 disk parameters, 1.6 (109 hp, gasoline).

Table of parameters and breaks of disks Model Daewoo Nexia 1.6 (109 hp, gasoline) - 2009

Disk drilling parameters, usually ring up:

• LZ (number of holes)
• PCD (circle diameter of hole centers)
• ET (disk departure)
• Dia (hole diameter)

razboltovka.ru.

DISOBER DISKS DEU Nexia 2010 1.5 (80 LS, gasoline)

1. Dzboboltovka.ru.
2. Daewoo.
3. Nexia.
4. 1.5 (80 LS, gasoline)
5. 2010 G.V.

Find the parameters of Daewoo Nexia 2010 disk, 1.5 (80 hp, gasoline).

Table of parameters and breaks of discs model DEU Nexia 1.5 (80 LS, gasoline) - 2010

Disk drilling parameters, usually ring up:

• LZ (number of holes)
• PCD (circle diameter of hole centers)
• ET (disk departure)
• Dia (hole diameter)

razboltovka.ru.

VAZ, "Chevrolet Cruz", "Daewoo Nexia", "Hyundai Accent" ... :: syl.ru

Each car owner sooner or later thinks about changing the appearance of its vehicle. Of course, high-quality tuning of the car will be considerable for the driver, if you consider that it includes the installation of various collaps and changing engine specifications. But it is possible to transform the car and partially, for example, equipping it with new cast wheelbases.
However, when choosing it is necessary to take into account not only departure, width and diameter, but also such a parameter like a disk break. We will talk about it today and talk.

What it is? Characteristic of the breakdown

Drying wheels are the diameter of the holes intended for bolts. Abroad, this characteristic is denoted by the PCD abbreviation. What is this parameter for the car? If the timber break does not correspond to a specific machine model, they will not be installed on the axis. Of course, it will not affect the appearance of the vehicle, but the technical part will suffer fully. When the car moves, the discs installed on the axis are destroyed by the steering and suspension elements. Neglecting this parameter can be brought to the fact that the wheel is unwinding in a way while driving, which will certainly lead to a road traffic accident.

Wheel marking and encryption

Speaking about the features of the breakdown, it is impossible not to mark the labeling of the disks. Most often, it is united for cast and simple stamped products. It is indicated by this factor in about the following way: 6JX17H3 ET30 PCD: 5/12 D 66.6. What does it mean? Let's wonder everything in order.

Factor 1.

The first character "6" speaks of the width of the disk. The next number is seventeen - indicates its diameter. Both values \u200b\u200bare measured in inches. "ET30" is an index of departure or removal of the disk. "5/112" - the breakdown parameter itself. Special attention should be paid to the last moment. What gives us to know the 5/112 breakdown parameter? The first digit indicates the number of required mounting bolts. The "112" symbol is on the diameter of the bolt data.

Factor 2.

Another nuance is the value "ET30". In our case, this indicates a departure indicator, which is 30. That is, the gap between the cave disc plane and the center of its width is thirty millimeters. The bustal plane is part of the area of \u200b\u200bthe product on which the disc is pressed to the hub itself.

Positive, negative and zero departure of automotive drives

In fact, the disk will have such drawing indicators? Zero departure The wheel receives only if the width center and the busty plane will completely coincide with each other. A positive removal is achieved when there are no points for the intersection of two advanced planes on the product. Well, if the transit plane goes to the width center, this departure is called negative (see photo).

ET is the only meaning that modern cars are labeled?

It is also worth noting that the abbreviation ET label the departure of the disk only German manufacturers. By the way, if the deposit parameter is negative, there is a hyphen in front of the company, and in our case the marking will be as follows: ET-30.
If this is a positive departure, instead of the firm makes the inscription YT. France marks the departure to the word "Deport". The departure and breaking of the Hyundai focus wheel drives and many other world market cars are indicated as "offset".

What is so important to the removal parameter for the machine?

Its essence is that when the departure is inconsistent, the disk is simply impossible to install on the car - this is hampered by some elements and pendant parts. When the removal is negative, the risk of wheel outlet is growing over the wheel arches of the machine. And on the contrary, if this value is positive, the tire will "hide" for the arches.

How does the wheeled disks measured?

Make it is not very difficult - it is enough to study a special table that contains data on the breaking of specific car brands. However, it does not always have the required information, so sometimes it is necessary to measure the data on their own. Below we will look at how to do it. The easiest thing is to us with the first indicator (the one that after the fraction). It can be defined by a naked eye - just to calculate the number of bolts and remember this value. Further will be more difficult. Since the breaking of the wheels ("Chevrolet Cruz" including) includes a diameter parameter of the circumference of the bolts, when calculating, we will need to use a special formula.
For all the wheels it is different. So, for example, for the disks with three bolt holes, it is necessary to apply the formula B \u003d AX1,155. At the same time, the value A is a distance between adjacent holes. For four holes - B \u003d AX1, 414; For five - B \u003d AX1,701. In measuring distances between adjacent bolts, it is impossible not to do without a special device - caliper. To the data obtained, add a diameter value. As a result, you will learn the diameter of the circumference of the bolts, that is, the value of V.

Do not forget to verify information

It is very important to pay attention to the accuracy of the measured data. The breakdown of wheels ("Daewoo Nexia" including) must contain exceptionally accurate information. And since this aspect is very close values \u200b\u200b(110, 112, 114), the risk of them is extremely high. But even the slightest discrepancy of the breakdown can handle the driving system and steering!

Additional Information

In order to recognize the hole of the hole under the hub, you need to measure the transition ring with the help of the ruler to which it is centered. But not all of these data be sure to measure your own hands - some of them are already spelled out in the technical passport of the machine. Another disk break can be indicated on the spare wheel from the inside of the stamped disk.
But so manufacturers come only with a spare wheel - even on branded steel elements, the company does not indicate the breakdown parameter. Most often, the month of their production is indicated on the surface of the stamped discs, as well as the emblem or the inscription of the manufacturer. There are no characters on the inside and at all. In this case, you can contact the official dealer and learn from it the exact parameters of the breakdown under the specific brand of the car.

Pay attention to the table and we carry out the results

To be confident in the data obtained during independent measurements, information should be checked with tabular values. If you have, for example, "Mercedes", and the parameters you received are equal to 111 millimeters, use tabular figures (112 millimeters), as the German Mercedes does not release discs with a breakdown of 110 or 111 mm. The domestic auto industry also has its own meanings relative to these parameters. So, for example, the breakdown of Wheel Dives VAZ is 4x98 millimeters. That is, if you have a value of 99 or 97 with independent measurements, focus primarily on the table data. But not all vases have such a breakdown. For example, on "Niva" of the 2121 series, this parameter is 5x139.7.
By the way, on most European foreign cars, this value is one (it is one hundred millimeters), regardless of the type of body, year of production, generation and volume of the engine.

Is a small deviation for passenger cars and SUVs?

Regarding the timber breaks, it can be said that deviations between values \u200b\u200bmay be permissible, but within no more than one or two millimeters. Thus, on passenger vases it is quite safe to install a disk with a diameter for fastening bolts in 100 millimeters (but no more!). If this figure is already 101 millimeter, the safety of the ride no one can guarantee you, and the running system will be exposed to large loads. Therefore, try to select products, as similar to this parameter with factory.

Conclusion

So, we found out what kind of wheeled wheel disks is, what kind of importance is it for the car. Now you understand which consequences can cause the wrong selection of wheels with an inappropriate departure, as well as how to measure these parameters on their own.
Knowing all the basic labeling parameters and their decoding outlined in this article, you can easily make a selection of automobiles (cast and forged) specifically under your vehicle model, regardless of whether the SUV is or a car.

If non-standard discs are installed on the car - this can lead to friction and increased wear. Therefore, it is worth sticking to the factory standards. Therefore, the correct selection of wheels must be an important element.

Tabolovka wheels

On Daewoo Nexia in different generations used different wheels. Typically, this information is specified in the service book, or technical documents of the car. Also, on each vehicle there is a plate, where it is written, which discs and tires are suitable.

Characteristics

Consider breaking the wheels for Daewoo Nexia according to the manufacturer's manufacturing industry by the year of release and generation:

Disk Options Daewoo Nexia:

Disk for Nexia.

PCD 4 × 100 diameter from 13 to 14, width from 5J to 6J, departure from 45 to 49. Similar parameters on Hyundai i20 (PB, PBT) 1.6 CRDI 2018. Tire dimension from 13 to 14, from 175 to 185 and profile From 60 to 70. Minimum rubber size: 175/70R13, maximum: 175/65R14.

Output

As you can see, a lot of tires and disks are suitable for Daewoo, and therefore the car enthusiast can choose what to taste. You can install, both simple stamped discs and cast.

DEUM DISKS "Daewoo Nexia" disks - an important special parameter that needs to be considered when selecting and buying a set of new wheels on this car. The second name of the parameter is rather common - the drill. The value and meaning is the same, just with another name. To know the data on this typical parameter is important to understand the method of fixing the wheel rim to the construct of the chassis.

Daewoo Nexia at one time received positive feedback from critics and car owners and was very common on the roads of the country. At the moment, the model is no longer produced.

Appearance and dismissal disks "Nexia"

The beginning of this model of the South Korean brand was in 1994. As a basis, the Opel Cadet car was taken, a little upgraded and adapted under modern realities. Subsequently, it was produced in countries such as Vietnam, Egypt, Romania and Uzbekistan. In the latter case, the manufacture of these machines in 2016 was finally discontinued.

Choose and purchase high-quality wheels on Daewoo Nexia will not work. Products of many brands presented on the market is suitable for this car model. You can choose products for every taste and wallet. Stamped wheels are the most common, but if you wish, you can purchase alloy. Presented products of any design, colors and shapes.

Thanks to the prevalence of the car, there are a huge number of disks and tires from all sorts of brands, which can easily be installed on "Nexia" with any wheel sizes.

The size of the disks for Daewoo Nexia from the plant can be in three versions, diameters from 13 to 15 inches. But if necessary, even the R16 discs are distributed among tuning lovers. For this, special spacers are used. Regardless of the country of manufacturer and year of release, disk breaks for Daewoo Nexia is the same and equal to 4x100.

In the factory configuration almost all cars were installed stamped wheels. Some of the most expensive versions were cast wheels R15.

Note!

Only with original wheels, the vehicle will receive all the factory settings and characteristics.

In tires and spare parts, a huge number of different products for tuning this car are presented. You can replace certain components and deliver improved sports and visually attractive. The main criterion on which the appearance of the vehicle depends - the wheels. Wheel replacement is carried out on dimensional and improved quality. However, it is important that the wheels of the increased diameter would not reduce the characteristics of the machine.

A new set of products must necessarily comply with all factory parameters and characteristics. Be sure to take into account the discharge of disks for "Nexia" as the most important indicator in the selection of new products. It is also necessary to pick up and install the right tires, because even on the highest quality disks, cheap tires will be spoiled, and the benefit will not be felt at all. The breakdown parameter also depends on whether the installation of a specific model of wheel drives per car is possible. If the parameter is not suitable, you should install special transition rings.

Note!

It does not matter what kind of breaking on "Nexia", transient rings allow you to install discs on the machine using the selection of the correct diameter of the central hole.

How the wheeled disks are measured on Daewoo cars

When the choice and acquisition of new wheels to "Nexia", it is necessary to find out the parameter of the drilling on the car in advance. The most affordable way to determine it for any brand car can be called the use of a special table, which can be found on the Internet. In it, depending on the year of production and the volume of the engine, all the necessary parameters and dimensions are presented.

In the second way, which is simultaneously the most correct and accurate, you can call data from the instructions for a car or other technical documentation that comes in the kit.

The third way is the least accurate and most time consuming. In this case, you can independently measure all the sizes. To determine the parameter of the breakdown, depending on the number of fixings, it will be necessary to apply the following formulas:

• B \u003d a × 1,155 - used for three holes;
• B \u003d A × 1,414 - is considered for four holes;
• B \u003d A × 1,701 - for five holes.

Having obtained the value of the required value, you can easily calculate the required diameter size, which is indicated as V.

Characteristics and parameters of wheels of wheels on Daewoo Nexia

The control parameter for absolutely all cars produced worldwide has the designation PCD, which is decrypted as Pitch Circle Diameter. The breakdown of wheels "Nexia" is 4x100. This applies to any car produced, regardless of where the plant is located and in which year the model has been released. In this case:

• Figure 4 indicates how many bolts are used to secure the rim. In other brands and models, the value may be different, from three to six;
• 100 shows the diameter of the circle on which the mounting holes are located.

All data are as important as possible when choosing a new set of disks.

Knowing the meaning of the breakdown, you can not rely on the knowledge of the seller-consultant, but choose the wheels you like yourself. The fluctuation of the size of the diameter at least per millimeter is invalid.

For the most accurate selection of wheels on Daewoo Nexia, you need to know such parameters like a breakdown and dimensions of the mounting holes. Possessing such information, problems with the selection and purchase will not arise.

Before purchasing, it is also advisable to consult a seller about the selected model. It is possible that some wheels in the course of operation show themselves not in the best way.

Choosing the wheels, it is necessary to take into account the factor, is it possible to buy tires of such sizes?

The larger the size of the wheels, the better the quality of management and behavior on the road. But it is also necessary to take into account the increase in the wear rate of the suspension parts and reduce the level of comfort in motion. In addition, the greater the size of the disks themselves, the lower it is necessary to choose the profile of the tires themselves. It will also not be the best way to make the wear of the wheels themselves, as the level of load on them will increase.

For the winter season for Daewoo Nexia, the wheels of 14 inches are suitable. They will give the machine optimal characteristics in bad operating conditions and on broken roads.

Tire Parameters on Daewoo Nexia:

• Width (millimeters) - from 185 to 215;
• Tire profile (%) - from 40 to 60;
• Minimum rubber size - 185/60 R14;
• Maximum rubber size - 215/40 R16.

Disk parameters for Daewoo Nexia:

• Drilling (often referred to as a breakdown) - 4 × 100;
• Diameter (measured in inches) - from 14 to 16;
• Width (inches) - from 5.5 to 7
• Departure wheel ET (millimeters) - from 45 to 49;
• The diameter of the central hole (DIA) is 56.6.

Minimum and maximum tire sizes for Daewoo Nexia

Large wheels on Dawoo Nexia

The minimum possible to install, according to the manufacturer's recommendations, is the R14 diameter. If necessary, the product R15 and R16 can easily be installed. It is possible to exploit the car on enlarged wheels without problems, it is confirmed by many years of experience in a huge number of fans of the brand. Important with increasing disk diameter reduce the height of the tire profile and measure so that there is no touch or friction about the wheel arch design.

As for the maximum permissible size, even 17-inch wheels can fit in the arc.

Of course, this will not help improve the comfort of the movement and dynamics of the car, but will definitely decorate the appearance. With such products, it is advisable to put rubber having a size of 205/40 R17. The car will become more stable on the road and will receive increased controllability. It will also increase fuel consumption.

You can choose high-quality discs on the car "Daewoo Nexia" only taking into account the parameters of the drilling on it, which is 4x100. Products with such data in the Russian market presented a huge amount.

Alloy wheels are beautiful, effectively and original. It is impossible to say that on our roads it is very practical, although many owners of mass cars are thinking about putting a round sum in cast wheels for their only and unique. It is tempting, but before that you need to weigh and calculate. Drying wheels for our Daewoo Nexia - In this case, the number one question. First breakdown, and then design.

The possibility of installing a disc on a car depends on the breakdown.

Each wheel disk is characterized by a mass of geometric values, which many have no idea about. In vain, because it is absolutely not enough to know the number of holes for the bolts and the diameter of the disk. A bunch of other parameters affect both safety and resource running, suspension and car tires. And here every proportion of a millimeter is important.

Disk break is a set of parameters that are built into a single geometric model or suitable for a particular car, or unacceptable for use on it.

Basic wheel drive parameters.

1. In the inches measuring the landing width of the disk.
2. Landing diameter. Also measured in inches.
3. The distance from the railway plane of the disc to the center of the tire. Designated.
4. The number of holes for fasteners and the diameter on which their center are located. Most often, this parameter is called, but this is not entirely true. The parameter is indicated as Pitch Cirkle Diameter or RSD.
5. The diameter of the board of the disc, the one that sits on the hub. DIA is indicated and measured in millimeters.

The PCD parameter depends on the distance between the centers of the adjacent holes and on their quantity.

What a breaking of Daewoo Nexia

To understand all this geometric compote, we will understand the examples with disks for non-zexia. As a rule, there are 13 and 14 inches with a diameter of 13 and 14 inches on the non-possible years of release. Here are their parameters:

• 13 / 5J PCD 4 × 100 ET 49 Dia 56.6
• 13 / 5.5J PCD 4 × 100 ET 49 DIA 56.6;
• 14 / 5.5J PCD 4 × 100 ET 49 Dia 56.6.

Stamped standard 13-inch disc for Nexia.

Now it becomes clear the marking of the standard disk of Nexia:

1. 13 and 14. - Dial diameter, measured in inches.
2. 5,5J (5J) or simply 5,5(5) - Width of the disk in inches.
3. PCD 4x100 - Four holes whose dials are located on a diameter of 100 mm.
4. Et 49. - The distance from the railway plane of the disk to the center of the tire is 49 of our millimeters.
5. Landing diameter of the hub opening 56.6 mm.

Set of 14-inch wheels on Daewoo Nexia with standard breakdown.

Alternative options

This is a standard breakdown for Nexia with 13 and 14 disks. If you wish, you can put 15 inches wheels if their parameters are as follows: 15 / 6.0J PCD 4 × 100 ET 40 Dia 56.6 .

It is clear that there will be no comfortable ride on such wheels, but it looks very impressive. Note that in any case the PCD and DIA parameters remain unchanged. With the removal, the question is complex, since the parameter cannot but take into account the width of the disk. If the removal is too large with a large diameter and large width, rubber will inevitably get the liners and wheels. And vice versa - if the removal is insufficient, but the wheels are wide and large in diameter, when turning, we will reveal tires about the pendant details.

Proven replacements

Cast disc on DEU Nexia GM12 (copy of the original disk).

Verified replacement options for factory disks:

• 6JX14 4x100 ET45;
• 6JX15 4x100 ET45;
• 5JX15 4x100 ET45;
• 5JX16 4X100 ET45;
• 7JX15 4x100 ET45;
• 7JX16 4X100 ET45.

Naturally, the landing hub diameter DIA for everyone remains stable - it is 56.6.

Theoretically, there is the possibility of installing disks of another breaks through adapters, but is it worth doing?

Conclusion

Almost all wheeled disks are marked, but there are also those on which marks simply not. In such cases, we can calculate the breakdown themselves, having only a caliper and calculator at hand (for those who have a triple in mathematics).

There is a simplest formula for calculating PCD - B \u003d NX1,414 where in this is PCD, n is the distance between the centers of two adjacent holes. Have a good choice, do not make mistakes with a breakdown and good all roads!

Video about choosing disks for Daewoo Nexia