Table circuit for knitting machine. Dresser table for knitting machine. do it yourself. Year - Creation of a new trade division of the company - Brother Sales, Ltd

So, consider the novelty - the table for knitting machine Series Comfort:

The table is made of high-quality materials and fittings, has an original design that will fit into any interior and will not take much space in your room.

The design of the retractable node and its fixation will allow you, literally, in a few seconds to install the machine into the working position.

You can work on both one and two phones.

The yarn is reduced to up, through a special hole in the shelf. This system allows to provide a better approach of the thread, as well as excludes the need to remove and / or change the reels after completing the knitting process. Together with this you can install reels and on the folding lid.

On the folding lid it is very convenient to place the Motka.

On the middle shelf of reels and accessories, and thanks to the rolling system of the lower box,

You will always have convenient access to any accessory.

In plastic containers, needles, cargoes, chapels and other useful devices for knitting will be lowered.

It's no secret that comfort in working for a knitting machine can be achieved only if all oscillations and vibrations are completely excluding when the carriage moves. Therefore, we did not use traditional wheels in the table, and installed it to the height adjustable support.
Also in the table for the knitting machine of the Comfort Series, a system of extension and fixation of the machine, which allows you to secure the machine during operation.
The extension occurs through reinforced guides capable of withstanding loads up to 200 kg,
,
And fixation takes place across the width with the fixing panel, which is located on the back of the retractable shelf.

The guaranteed service life established by our company on the nomination mechanism is 10 years.

dimensions Table (mm): width depth height
1200 420 940

Shelf size for knitting machine: 1155x 220.

Distance from the shelf to the floor:

Dresser table for knitting machine

I looked at the dresser tables on the Internet, showed their husband. So he decided to pamper me. Still, the machine in the hall is worth now .. with this table it can be hidden for a while, when you do not knit or you are waiting for guests.
In our city you can now order sawing and facing the edges of the LDSP right in the building materials store. Make quickly, and the quality suits us.
The table is almost ready!

Our table was born in flour, there were a lot of measurements, there were photos of the happy owners of factory tables, argued about the height of the table, the height-width of the retractable shelf-table top. I will share the drawings of our table. I basically knit standing, I sit down when I do a big decker, I raise the loop, etc. Convenient to me so. Well, the gymnastics is extra)))
Immediately I warn you, the drawings are rough, the sizes are approximate. The final dimensions of the details can be viewed on the scan of layouts. There are two features in size: they indicate how the ends are treated with thin edge of PVC 0.5x19mm (dotted line) or PVC edge 2x19 mm (solid line). Well, another orders ordered the shelf, they calculated, I crossed it out on the layout.



The part number on the layout corresponds to the part number in the list.
The regiment holds on the guides of these Ball guides full extension with the closer.
They push the shelf very far, Sergey shocked (screamed) one of the details so that the machine does not turn the table) when we install the machine and try to knit on the new table, I will write comfortable or not ..
In total, the table cost us 5 thousand rubles with kopecks. Substantial savings of the family budget)
You can compare with prices in online stores and, but also it is also necessary to deliver the delivery, and from Moscow to Altai will not be at all cheap.

Photos Table for knitting machine:

Length assembled: 1290 mm, height: 875 mm, depth: 490 MM.

The table comes in a disassembled state and takes three boxes:
1 - 1300x780x90 mm / 50 kg
2 - 1300x500x60 mm / 20 kg
3 - 480x160x120 mm / 5 kg

Despite the fact that no complex operations in assembly are made, the minimum experience is still necessary.
For assembly, you will need tools:

• A hammer
• Screwdriver and 2mm drill
• Knock screwdriver medium (PZ3)
• Screwdriver slotted small (0.5x3)
• Screwdriver slotted average (0.8x4)
• Wrench wrench 7mm (or Pasal)

If you have never collected furniture before or you don't have required tools, invite a collector specialist.

Now available for ordering tables of such colors:

Tables-stands are made of high-quality material of the German company Egger.
For doors, smooth handles are chosen for which the yarn does not cling.

So, consider the novelty - the table for the knitting machine series Comfort:

The table is made of high-quality materials and fittings, has an original design that will fit into any interior and will not take much space in your room.

The design of the retractable node and its fixation will allow you, literally, in a few seconds to install the machine into the working position.

You can work on both one and two phones.

The yarn is reduced to up, through a special hole in the shelf. This system allows to provide a better approach of the thread, as well as excludes the need to remove and / or change the reels after completing the knitting process. Together with this you can install reels and on the folding lid.

On the folding lid it is very convenient to place the Motka.

On the middle shelf of reels and accessories, and thanks to the rolling system of the lower box,

You will always have convenient access to any accessory.

In plastic containers, needles, cargoes, chapels and other useful devices for knitting will be lowered.

It's no secret that comfort in working for a knitting machine can be achieved only if all oscillations and vibrations are completely excluding when the carriage moves. Therefore, we did not use traditional wheels in the table, and installed it to the height adjustable support.
Also in the table for the knitting machine of the Comfort Series, a system of extension and fixation of the machine, which allows you to secure the machine during operation.
The extension occurs through reinforced guides capable of withstanding loads up to 200 kg,
,
And fixation takes place across the width with the fixing panel, which is located on the back of the retractable shelf.

The guaranteed service life established by our company on the nomination mechanism is 10 years.

Overall dimensions of the table (mm): width depth height
1200 420 940

Shelf size for knitting machine: 1155x 220.

Distance from the shelf to the floor:

Dresser table for knitting machine

I looked at the dresser tables on the Internet, showed their husband. So he decided to pamper me. Still, the machine in the hall is worth now .. with this table it can be hidden for a while, when you do not knit or you are waiting for guests.
In our city you can now order sawing and facing the edges of the LDSP right in the building materials store. Make quickly, and the quality suits us.
The table is almost ready!

Our table was born in flour, there were a lot of measurements, there were photos of the happy owners of factory tables, argued about the height of the table, the height-width of the retractable shelf-table top. I will share the drawings of our table. I basically knit standing, I sit down when I do a big decker, I raise the loop, etc. Convenient to me so. Well, the gymnastics is extra)))
Immediately I warn you, the drawings are rough, the sizes are approximate. The final dimensions of the details can be viewed on the scan of layouts. There are two features in size: they indicate how the ends are treated with thin edge of PVC 0.5x19mm (dotted line) or PVC edge 2x19 mm (solid line). Well, another orders ordered the shelf, they calculated, I crossed it out on the layout.

Photos Table for knitting machine:

Length assembled: 1290 mm, height: 875 mm, depth: 490 MM.

The table comes in a disassembled state and takes three boxes:
1 - 1300x780x90 mm / 50 kg
2 - 1300x500x60 mm / 20 kg
3 - 480x160x120 mm / 5 kg

Despite the fact that no complex operations in assembly are made, the minimum experience is still necessary.
For assembly, you will need tools:

• A hammer
• Screwdriver and 2mm drill
• Knock screwdriver medium (PZ3)
• Screwdriver slotted small (0.5x3)
• Screwdriver slotted average (0.8x4)
• Wrench wrench 7mm (or Pasal)

If you have never collected furniture before or you do not have the necessary tools, invite a collector specialist.

Now available for ordering tables of such colors:

The shelf for attaching a knitting machine is located at an altitude of about 70 cm from the floor, put forward by 20 cm and is rigidly fixed in the extended position. At the same time, the canvas hangs freely, the knees do not rest, sit comfortably and the carriages can be removed, not assigated wall walls.

Behind the retractable shelf there is space for storing accessories - cargo, comb, etc.

The table rests on four rubberized wheels, which makes it easy to move it if necessary. The front wheels are equipped with a stopper that blocks not only the rotation of the wheel, but also the rotation of the wheel module around the axis.

On the top shelf there is a laptop with a screen diagonal 14-15 "

The doors of the chest can be easily discovered even while working when the needle is naked and cargo.

Behind the retractable shelf you can easily place reels or shirts of yarn. After extending, the shelf remains more than 20 cm free spaceAnd the yarn is fed to the nitheleod completely freely.

You can interrupt work at any time. It is enough to remove the nitheleod, the shift knob of the phonette and fold the handle of the upper carriage. After that, you can push the shelf with a knitting machine into place, the product is folded on the shelf in front of the machine, and the reels are removed to the middle or bottom box.

Egger.
For doors, smooth handles are chosen for which the yarn does not cling.

Dresser table for knitting machine

From the author: "I looked at the dresser tables on the Internet, showed their husband. So he decided to pamper me. Still, the machine in the hall is worth it .. With this table it will be possible to hide it for a while, when you do not knit or you are waiting for it.
In our city you can now order sawing and facing the edges of the LDSP right in the building materials store. Make quickly, and the quality suits us.
The table is almost ready!

Our table was born in flour, there were a lot of measurements, there were photos of the happy owners of factory tables, argued about the height of the table, the height-width of the retractable shelf-table top. I will share the drawings of our table. I basically knit standing, I sit down when I do a big decker, I raise the loop, etc. Convenient to me so. Well, the gymnastics is extra)))
Immediately I warn you, the drawings are rough, the sizes are approximate. The final dimensions of the details can be viewed on the scan of layouts. There are two features in size: they indicate how the ends are treated with thin edge of PVC 0.5x19mm (dotted line) or PVC edge 2x19 mm (solid line). Well, another orders ordered the shelf, they calculated, I crossed it out on the layout.

Table for knitting machine - Dream of knitters! So I am stuck: maybe someday, the husband will have time, and he, too, will make such or such a table ...

In the meantime, the photo collected, the sizes so that it was to start thinking when the opportunity appears.

So, consider the novelty - the table for the knitting machine series Comfort:

The table is made of high-quality materials and fittings, has an original design that will fit into any interior and will not take much space in your room.

The design of the retractable node and its fixation will allow you, literally, in a few seconds to install the machine into the working position.

You can work on both one and two phones.

The yarn is reduced to up, through a special hole in the shelf. This system allows to provide a better approach of the thread, as well as excludes the need to remove and / or change the reels after completing the knitting process. Together with this you can install reels and on the folding lid.

On the folding lid it is very convenient to place the Motka.

On the middle shelf of reels and accessories, and thanks to the rolling system of the lower box,

You will always have convenient access to any accessory.

In plastic containers, needles, cargoes, chapels and other useful devices for knitting will be lowered.

It's no secret that comfort in working for a knitting machine can be achieved only if all oscillations and vibrations are completely excluding when the carriage moves. Therefore, we did not use traditional wheels in the table, and installed it to the height adjustable support.
Also in the table for the knitting machine of the Comfort Series, a system of extension and fixation of the machine, which allows you to secure the machine during operation.
The extension occurs through reinforced guides capable of withstanding loads up to 200 kg,
,
And fixation takes place across the width with the fixing panel, which is located on the back of the retractable shelf.

The guaranteed service life established by our company on the nomination mechanism is 10 years.

Overall dimensions of the table (mm): width depth height
1200 420 940

Shelf size for knitting machine: 1155x 220.

Distance from the shelf to the floor:

Dresser table for knitting machine

I looked at the dresser tables on the Internet, showed their husband. So he decided to pamper me. Still, the machine in the hall is worth now .. with this table it can be hidden for a while, when you do not knit or you are waiting for guests.
In our city you can now order sawing and facing the edges of the LDSP right in the building materials store. Make quickly, and the quality suits us.
The table is almost ready!

Our table was born in flour, there were a lot of measurements, there were photos of the happy owners of factory tables, argued about the height of the table, the height-width of the retractable shelf-table top. I will share the drawings of our table. I basically knit standing, I sit down when I do a big decker, I raise the loop, etc. Convenient to me so. Well, the gymnastics is extra)))
Immediately I warn you, the drawings are rough, the sizes are approximate. The final dimensions of the details can be viewed on the scan of layouts. There are two features in size: they indicate how the ends are treated with thin edge of PVC 0.5x19mm (dotted line) or PVC edge 2x19 mm (solid line). Well, another orders ordered the shelf, they calculated, I crossed it out on the layout.

Photos Table for knitting machine:

Length assembled: 1290 mm, height: 875 mm, depth: 490 MM.

The table comes in a disassembled state and takes three boxes:
1 - 1300x780x90 mm / 50 kg
2 - 1300x500x60 mm / 20 kg
3 - 480x160x120 mm / 5 kg

Despite the fact that no complex operations in assembly are made, the minimum experience is still necessary.
For assembly, you will need tools:

• A hammer
• Screwdriver and 2mm drill
• Knock screwdriver medium (PZ3)
• Screwdriver slotted small (0.5x3)
• Screwdriver slotted average (0.8x4)
• Wrench wrench 7mm (or Pasal)

If you have never collected furniture before or you do not have the necessary tools, invite a collector specialist.

Now available for ordering tables of such colors:

The shelf for attaching a knitting machine is located at an altitude of about 70 cm from the floor, put forward by 20 cm and is rigidly fixed in the extended position. At the same time, the canvas hangs freely, the knees do not rest, sit comfortably and the carriages can be removed, not assigated wall walls.

Behind the retractable shelf there is space for storing accessories - cargo, comb, etc.

The table rests on four rubberized wheels, which makes it easy to move it if necessary. The front wheels are equipped with a stopper that blocks not only the rotation of the wheel, but also the rotation of the wheel module around the axis.

On the top shelf there is a laptop with a screen diagonal 14-15 "

The doors of the chest can be easily discovered even while working when the needle is naked and cargo.

Behind the retractable shelf you can easily place reels or shirts of yarn. After the extension, the shelf remains more than 20 cm of free space, and the yarn is fed to the nitheleod completely freely.

You can interrupt work at any time. It is enough to remove the nitheleod, the shift knob of the phonette and fold the handle of the upper carriage. After that, you can push the shelf with a knitting machine into place, the product is folded on the shelf in front of the machine, and the reels are removed to the middle or bottom box.

Egger.
For doors, smooth handles are chosen for which the yarn does not cling.

Why does such a question arise like the manufacture of a table for a knitting machine with your own hands? First, those cars that are in free sale do not have comfortable tables. Secondly, each knitter has its favorite anthropometric sizes, and therefore comfortable furniture for each of them will be different.

And finally, the knitting machine and all accessories, and devices associated with it, must be kept somewhere, so the table or chest of drawers will be the element of furniture, which will organically fit into the apartment atmosphere.

Features of the selection of drawings for creating a table for a knitting machine with their own hands

There are many options for the tables for the knitting machine with their own hands, the drawings can be found on the Internet.

INto remember!Each knage independently chooses what and where she should be in sight. Therefore, before making a gift home arterian, it would be good to ask her, which of the models it will come true.

How to create a drawing yourself

Of course, you can develop your own drawing. But for this you need to have at least minimal design skills. It would also be nice if the hostess independently sketched the sketch of what she would like to see.

In addition, the furniture needs to be designed under a certain knitting machine. Since their sizes may differ from each other.

How to assemble the table for a knitting machine

Before starting the assembly of the table for a knitting machine, it is advisable to get it yourself more with its drawing and make a sequence of assembling nodes. It is also necessary to choose not only the material from which the table will be made, but also the color of this material. The table must harmoniously fit into the interior of the apartment.

As a rule, the tool required for the assembly of the product is standard, as is the assembly of any furniture. But, this is if all the details were pre-ordered according to the drawing. For better and fast assembly, it is better to use a small screwdriver with various nozzles.

Start assembly usually from the frame. After assembling the frame, the rear wall is installed.

Importantmaximum accurately to withstand the straight corners of the side of the frame. Since after fixing the rear wall, change the angles will not be possible.