Peugeot 3008 Hybrid4 (2017 year). Manual - Part 24

Comfort Support Systems

Heating and ventilation

Air supply to the salon

Air entering the cabin filtered
and served in it or outside through
winding
air intake, or is driven by
a closed circle through the recirculation system.

System management

By choosing the driver, front and rear
passengers air can be served in
salon different ways - depending
from the configuration of the car.
Temperature control system
allows you to regulate thermal comfort
in the cabin at its own discretion
by mixing various
air flows.
Air distribution system
flows allows you to direct air in
different points of the cabin by combination
different controls.
Air flow control system
allows you to increase or decrease
air Fan Speed
in the salon.
Depending on the configuration of your
car management system
exercise through the menu "

Microclimate"

on the touch screen, or from the front panel
central console.

Salon Air Distribution

Windshield blowing nozzle for removal

inea or condensate.

The nozzle blowing the front side windows for

removal of inlet or condensate.

Side ventilation grids with damper and

regulator direction of air flow.

Central ventilation lattices

with damper and regulator direction
airflow.

Air supply to the legs of the front passengers.

Air supply to the legs of the rear

passengers.

To close the ventilation grids:
F.

side: Translate the cursor in the middle

position, then - Wilk, to the side
doors.

central: Translate the cursor in

average position, then - Block, to
the center of the instrument panel.

Comfort Support Systems

"Stop Start"

Salon heating systems and
air conditioning work
only when the engine is running.
To maintain comfortable
microclimate can be at time
suspend the work of the system "Stop-
start".
Additional information
about the system "

stop Start"See in

To ensure proper operation of these systems, the following is recommended

regulations:
F.

So that the air flows are distributed across the cabin evenly, watch the cleanliness

outdoor air intake lattices under windscreen and not

overlap the nozzles, ventilation grids and air ducts, as well as exhaust

channels located in the luggage compartment.

Do not close the illumination sensor from the light, located on the instrument panel; is he

works in the system of automatic air conditioning.

To ensure long and trouble-free operation of the air conditioner, turn it on

at least 5-10 minutes at least one or twice a month.

Follow the cleanliness of the cabin filter and systematically replace all

its designs there is a additive with active ingredients intended for

cleansing air and maintain cleanliness in the cabin (the filter removes all sorts

allergens, eliminates unpleasant odors and prevents the settlement of fat spots).

air to specialists in accordance with the prescriptions given in the service

warranty book.

If the air conditioner stopped cooling the air, turn it off and contact it.

pEUGEOT service network or specialized technical center.

In case of towing a trailer with a maximum mass of the mountain at high temperature

ambient air shutdown air conditioner allows you to facilitate the load on

When operating the air conditioner in the parking lot
there is a natural selection
water condensate flowing
under the car.

If as a result of a long stay in the sun
the temperature in the car remains too
high, you can no hesitate to open it on
a few seconds to ventilate.
Install the air supply regulator to mode
sufficient to ensure effective
carrying salon.
The air conditioning system does not contain
chlorine-containing components representing
threat to the ozone layer of the earthly atmosphere.

Comfort Support Systems

Air conditioner with manual settings

Rotate this handle between

blue zone (cold
air) and red (warm
air).

Temperature control

Distribution regulation

air on the salon

To windshield and side
windows.

To central and side
ventilation lattices.

To the legs of passengers.

Click this button as many times

how much will you need to choose
the desired direction of air.

Temperature setting.

Incl. / Off. air conditioner.

Adjusting the distribution of air

Adjust air supply to the salon.

Air recycling in the cabin.

Air conditioning system
it works only when the engine is running.

The distribution of air flows can
change by adding the appropriate
control lamps.

Comfort Support Systems

Air supply adjustment to salon

Turning on / off

air conditioner

Recycling air in the cabin

Air conditioner is designed to work in any
the time of year, while the cabin window must be closed.
You can:
-

in summer, lower the air temperature in the cabin,

in winter, at temperatures above 3 ° C, speed up removal
condensate from glasses.

Click on this button to

enable the system; wherein
it will turn on its control
lamp.

Click on the button "

large

propeller" or " small

propeller"to enlarge

or reduce air supply.

At the same time will light up
relevant control
lamps.

Turning on

Shutdown

Air conditioning does not work,
if the air supply regulator
switched off.
To faster cooling the atmosphere
in the cabin, you can for a few seconds
enable air recycling.
Then turn on the feed again
outdoor air.

If you hold down the button
"

small propeller"Up to maturity

all control lamps (shutdown
systems), microclimate in the cabin more
it will not be regulated.
However, easy movement of air
on the salon provided by the movement
car, will be felt.

Try not to include
air recycling for a long time is
may lead to fogging glass
and deterioration of the atmosphere in the cabin.

Outdoor air supply allows
avoid subsidence of condensate in the wind
and side glasses.
Air recirculation allows
isolate salon from outdoor
unpleasant odors and smoke.
The same function contributes to the accelerated
achieving the desired temperature
air in the cabin.

Re-click on this button to

turn off the system; At the same time it
the control lamp will go out.

Turning off air conditioner can entail
behind me uncomfortable phenomena (increased
humidity in the cabin, sedimentation of condensate on the glasses).

Re-click on this button,

in this case, its control
the lamp will go out.

Click this button when

it will turn on its control
lamp.

Not all car owners are familiar with the interior filtering mode, its useful properties, features of application. Consider what air recycling in the car and how to use it. In fact, recycling is an air intake inside the cabin, filtering through the climatic installation and the subsequent distribution of deflectors.

The main difference between the recycling from the usual fence is that the air flow comes from the cabin, and not from the outside. Recycling mode allows you to quickly heat, cool the air, as the temperature in the cabin differs from the temperature overboard the car. Climatic installation It spends less time, power, fuel consumption by engine.

In practice, there are few people like this function. Most often recycling are used to prevent penetration unpleasant odor inside the cabin. For example: Ahead of a walking car is very smoke, smoking, dusting of the road. In order not to feel these odors, activate the mechanical recycling button and overlap access from the outside.

Positive sides

1. Comparatively rapid flow temperature change. One air intake is outside 2 - 3 cycles inside the cabin.
2. Heating occurs even faster due to the difference in temperature indicators.
3. Power selection is below 35%.
4. An indispensable function for the driver, passengers suffering from allergic reactions, increased sensitivity to smells, dust, flower pollen.

Negative factors

• the complete absence of a clean air intake from the outside. Despite the partial filtering during cyclic exchange, the air is contaminated and gaining more harmful substances, humidity increases;
• long inhalation contributes to the development of allergenic diseases;
• prolonged air recycling in the cabin leads to fogging windows. The problem is eliminated by combining the operation of the air conditioner and filtering.

Representatives of the health care system and manufacturers of cars recommend using recirculation mode 15 - 20 minutes. After you must open the windows, run fresh air and air the salon.

Location of the button and activation of the mode

Each car has a mechanical button in different ways. The practice of its installation on the front torpedo in the central part in the climatic block area. To simplify the search, manufacturers use a typical marking - a car with an annular arrow inside the cabin. On the image above, this button is indicated by a number 3. Seeing it, boldly activate, use. Deactivation of the filtration mode occurs in a similar way, only for this uses a mechanical button with another pattern - the "out of the cabin" arrow or re-pressing.

Some technical means domestic production Not equipped with automatic, and drivers use levers. For example: Vases of models removed from production, have three adjustment levers: the flow of cold, hot (warm) stream, closing the damper with a mechanical drive.

Cars equipped with climate control, automatically adjust the temperature and care about the purity of the air flow. All processes are managed by air recirculation sensor. It is installed under the central console of the car. When activated, the controller analyzes the temperature and air content. According to a similar principle, household climate techniques are functioning.

Characteristic malfunctions

Under the condition of moderate use, the careful circulation of the resource of operation is unlimited. The failure facilitates the excess of the permissible strength of the current, the short circuit in the chain, the negative consequences of the accident, impact.

In practice, there are cases of weak contact pads with terminals, fuse brave, mechanical damage.

Do not forget about periodic interior ventilation. Every second technical inspection Replace salon filter, Conduct a defecting of air supply channels from the outside.

Video: Air recycling, as it works.

Ventilation and heating VAZ 2109

As is known, on the VAZ 2109, the interior heating is provided by air heated by the radiator. On VAZ 2109, heating and ventilation of the cabin are interconnected and represent a certain special system.
In this article, we will look at the general principles of the system of heating and ventilation VAZ 2109.

Heating system

Usually, heating system Car VAZ 2109 consists of several basic elements and nodes carried out below.

Heater

The heater itself or stove is the main link in the heating system. It is fastened with 4 nuts in the car's cabin under the bolts.
Air ducts are installed on the stove, which are fixed to the instrument panel from below. Sealing gaskets are required in their designs.

What is the stove

The heater of the VAZ 2109 consists of:

• 2 plastic shells connected to each other brackets (fastening brackets are connected around the perimeter);
• Special harness laid in the grooves for sealing;
• Electric fan, which forcibly delivers air to the cabin and is fastened with screws over the stove;

Note. The motor is installed on the stove so that its dismantling is convenient and did not cause any difficulties.

• Heating radiator, which is installed in the heater's casing;
• Crane;
• The cooling system pump, which carries out the circulation of fluid through the radiator;
• Handles stoves that allow you to manage the heater.

Control knobs stove

It is possible to achieve the most comfortable conditions in the cabin, if you move the stove control knobs and adjusting the position of the nozzles in the following way:

• Upper right handle adjusts the air supply to the driver's feet and front passenger (If the leftmost left position is the maximum feed, if the handle in the extreme position on the right - the flow is blocked).

• Left top handle adjusts air supply to.
• The lower handle adjusts the temperature of the air, which enters the cabin (the leftmost position is cold air, the extreme right position is hot).
• The left-click-rotational, visible in the photo above, the stove fan is connected. It will increase the air supply.
  The button has 4 positions: 0 - off state, 1 - initial speed, 2 - average speed, 3 - maximum speed.

If the air temperature on the street is minus 20 degrees Celsius, the stove begins to ensure the maximum heating mode automatically.
Indicators in this case are as follows:

• +20 degrees Celsius is provided in the vehicle cabin;
• +25 degrees Celsius is provided in the passenger foot zone and driver.

Radiator

This is one of the most important details of the car heating system. Unfortunately, during the passage of a certain amount of time begins to flow.
Traces of toosol on a passenger rug or under a rug - a symptom of the heater radiator leakage. In this case, on the VAZ 21093, the heating of the salon will be absolutely broken and will have to replace the radiator.

Types of radiators

For VAZ 2109, there are several basic types of radiator.
The most popular are considered:

• Aluminum original;
• Aluminum non-original;
• Copper.

Of all this trinity, the most expensive is a copper radiator, which can also be sought in the case of which and which is largely more reliable than the rest.
Less reliable, but cheaper. The original costs about 700 Russian rubles, while unoriginal can be used for 400 rubles.
The design of both types of aluminum radiators is different:

• The plates in the original radiator are located much more dense than in the non-original version.
• The area of \u200b\u200bheat exchange in a non-original radiator is less than in the original.
• The design of the aluminum original radiator is much stronger.
• On the original radiator, the air begins to warm already at a temperature of the coolant in 60 degrees, and in non-original only at 90 degrees and higher.
• Inside the radiators of the original there are special swirls of coats, made in the form of a spiral tape. They significantly increase the efficiency of work, because the coolant does not "fly" through the radiator, and slowly circulates, efficiently by moving heat.

Replacing the radiator

Need if the old one does not function quite efficiently.
A replacement is carried out in the following way:

• The front panel is unscrewed.
• The radiator is dismantled and excreted carefully from its place.
• Install a new one.

Note. Masters self-taught recommend removing the radiator from the bottom of the instrument panel, where the lower shelf and prevents it. This shelf is scolded, and after installing a new radiator, attached on self-drawing, and in the future its removal will be easy.

On the VAZ 2109, the salon heating system is notable for exhaust ventilation, which provides suction of air from the cabin. There is this ventilation on the VAZ 2109 from behind.
In addition to providing air suction, exhaust ventilation is also carried out through the discharge, which occurs in deflectors when the vehicle is moving.

Valve

Exhaust ventilation on some versions of VAZ 2109 is endowed with valves that serve to increase the number of fresh flow air in the cabin.
In crude weather, these same valves help reduce glass fog. Basically, the VAZ 2109 models are not endowed with these valves, and most owners independently establish them on their own cars.
What needs to be done to install the valve:

• It is enough to make technological holes in the body.
• Remove the rear bumper.
• Place planting places for valves.
• Insert valves.

Features of the operation of the stove and its refinement

Car owners VAZ 2109 are often concerned that over time, the stove begins to warm well. You should not say that it will be uncomfortable in such a car.
In such cases, only the modernization of the stove is able to solve the problem.

Methods of refinement

Methods set. Below are some of them.

Lever control damper

So:

• You can simply pull the bracket control cable to solve the problem. 1-2 cable turns are made on the flap control lever (the lever itself is placed on the stove body, near the gas pedal).

Note. The joints of the air ducts and the edge of the heater flap are pea rubons, which is not fully compressed.
In this regard, a seizure of several millimeters is formed, and the flap is completely closed. The method described above will help customize the lever properly.

• You can get to the control lever and in other way. On the driver's side there is a place and you need to try to reach your hand and pull the lever, be sure to enable the heater fan.
  In the process of adjustment, the left ear will be in the area of \u200b\u200bthe duct nozzle and therefore, it will be possible to hear how the sound of the outgoing air changes.

Heater crane

The reason for the inefficient operation of the heating system can be the incomplete opening of the stove crane. Such a problem, to the word, is found almost all the front-wheel drive cars of the VAZ family.

• The problem solving the valve control cable and the subsequent adjustment of the control lever to the maximum open position may be tested.

Note. In this case, it is possible that the valve will now not be fully closed. But the problem is not in this, but in the fact that after adjusting the lever, the damper can lose hermetically and begin to leak (seen in the photo).
In this case, you can advise the winding of the leakage of a cloth, which was impregnated in sealing and fixing all this with cold welding.

Air ducts

The reason for the poor quality of the heating system can be the leakage of air ducts. That air that is injected with the heater fan partially goes into the slot, and the air flow, thereby weakens and cools.

• The solution may become complete sealing and sizing compounds, which are located in the fields of air from the stove before exit.

Aerial traffic jams

In addition, the cause of bad work stoves can become aerial traffic jamsFood formed in the heater radiator.

• The solution will be the stop of the car front part on any elevation. Then you should open the heater's fully tape and click on the accelerator pedal several times.

Above, there were some ways to eliminate problems with the heating and ventilation system VAZ 2109. Instructions and tips, these experts are a chance to "cure" your car, thereby well saving on repair.
As you know, the price of technical service in a hundred is not low and if they regularly carry out them, the family budget will noticeably discrepancy. It is recommended to use photos and video materials in the process of independent work.

It is good or bad, but we live in a country with harsh climatic conditions. In the summer, everyone suffers from the heat, every year everything is hotter, in winter - a friendly frozen, spending cash on heating. Spring, autumn also do not please.

As a result, it turns out that coming out of the house and sowing into the car, come across the problem - there is no comfort for normal conditions for living in the cabin of the car. Lucky with the ventilation system of the salon Arabs and Brazilians - I installed myself in the car air conditioning, and ride all year round. And the Eskimos are also good - enough presence in the car.

And we are from Brest to Vladivostok, both of these systems are needed, as they say, in one bottle, more precisely, in the cabin. In what money this combination comes out and how many gasoline "eats" cars year-round - a separate conversation, but one cannot be denyed - in cars, driving on the fields and forests, salon ventilation systems are needed "like air".

It would seem that you can ride without them, but the harsh truth of life quickly convince us to ride in the abpentent car of the car in winter - So guarantee all sorts of diseases from sinusitis to prostatitis, not to mention the problems with the gynecological sphere.

In the summer, it seems that everything seems simple - opened the window and enjoy the oncoming breeze, but in traffic jams, unfortunately, this breeze is not enough for everyone. Well, where there is a breeze, it does not bring anything good, except otitis, conjunctivitis and other diseases.

And you know that the short stay in the preheated oven, into which the car is becoming a summer day from the sun, even in healthy people can cause hypertensive or vascular crisis or worse than a heart attack, stroke, and many other disgusts. And considering the cost of treatment, I don't really want to pick up something from this set.

If we consider that it is not so good to service, then you should take care of your health.

Salon filter

When the interior ventilation system is running, the air passes through, and then heated or cooled, depending on the parameters set. Air is supplied for heating or cooling into the interior of the machine through a single casing.

The temperature and speed of the air flow is adjustable using special regulators on the control panel of the cabin ventilation system. Body ventilation machine occurs with a constant air flow.

The outer air falls inside the car through the air intake near the windshield, and the outside it turns out through the outlet channels, which are installed under the rear bumper.

Air volumes are adjusted by a four-speed fan. When the interior ventilation system is turned on, the heat runs heat from the heated coolant, which is in the cabin. A mixing flap allows you to adjust the necessary temperature in the cabin of the machine, "making a cocktail" hot air with a cold outdoor.

Air Conditioning - Excellent Salon Ventilation System

Summer saves - this is an excellent salon ventilation system. In cooling mode, it removes an excessive moisture and lowers the temperature in the cabin.

It happens as follows: Liquid refrigerant moves along the contour high pressurewhen pumping in the contour low pressure The refrigerant evaporates and gas is formed. At the same time, the refrigerant is very cooled, taking heat in the cabin.

The cooled air fan penetrates the car interior. Further, passing through the capacitor, the liquid refrigerant returns heat outdoor air. As the refrigerant constantly walks along a closed contour, the car's salon is cooled constantly and the heating release can last for a very long time.

The moisture of the air mass of the cabin is removed, condensing on the evaporator of the Condichen refrigerator. As a result, we have an automatic and constant salon ventilation system that is installed and adjustable by air conditioning.

The outer air can enter the interior through the windows of the doors with lowered glasses and air intake, located in front of the windshield on the right and equipped with a dust capture filter, which cleans the air from dust, soot, plants, etc. air entering the interior through the air intake, passes through the heater. Depending on the position of the arms of the controllers of the block 13 (see Fig. 1.6), heating and ventilation in the vehicle is entered, or cold air.

The arrangement of the air flow distribution is shown in Fig. 1.8, the location of heating and ventilation controls - in Fig. 1.9.

The following air flow solutions are located in the car.

1 - air supply air ducts to the feet of passengers in the back seat.

2 - the side nozzles of air supply to the driver and the passenger on front seat or on the glass front doors. The direction of the air flow is regulated by turning the lattice (in the vertical direction) and the sash (in the horizontal direction) for the handle 2, located in the middle of the lattice. The stream intensity is adjusted by the movement of the wheel 1 in the vertical direction. With the upper extreme position of the adjusting wheel, the air flow from the left nozzle is maximal, at the lowest position - the air flow is blocked. The stream intensity control algorithm from the right nozzle is similar to the left.

3 - Flower windows blowing nozzles.

4 - windshield blowing nozzles.

5 - central air supply nozzles in the salon. The direction of air flow from the central nozzles is regulated in the same way as from the side (see paragraph 2).

To ventilate the cabin, install the regulators and switch of the ventilation control unit and heating to the following positions.

1. Turn clockwise until the adjustment handle 2 of the air flow temperature is stopped.

4. Install the regulator 3 the desired air supply speed of the heater electric fan.

5. When fading windshield, install the controls of the control system of heating and ventilation of the cabin, as shown in the photo.

Helpful advice:If the car is equipped with air conditioning, set the temperature regulator of the air supplied to the leftmost position. This method is most effective in summer in rainy weather.

For quick cleaning of windshield and glass front doors from snow and ice do the following.

1. Turn counterclockwise to the extreme left position of the knob of the regulator 1, and the knob of the regulator 2 clockwise to the extreme right position until it is shown as shown in the photo.

2. Set the minimum speed switch 3 modes of the heater electric fan and gradually, in small time intervals, increase the speed of the electric fan, turning the switch clockwise to the right to the maximum. A gradual increase in the speed of the electric fan will prevent the appearance of a crack in the windshield as a result of a sharp drop of temperature.

For quick air warming in the cabin, follow the following.