Test antifreeze SINTEC LUX G12. Magazine "Avtodel". All about antifreezes of the advantage of the product synthek red G12

If you are the owner of a vehicle, then you will sooner or later a choice of fluid for the cooling system will appear. This fluid is an integral component for normal engine operation. Therefore, today we will tell you why Antifreeze "Sintek" is such popular among motorists, and also offer to your attention from other drivers about him.

If antifreeze is made using good equipmentAnd for its foundation, high-quality components are taken, in your car never:

• does not boil the engine;
• cooling fluid does not foam;
• no precipitate in the cooling system is not formed;
• corrosion will not kill the elements of the system.

[Hide]

Basic information about antifreeze synthek

Recently, the refrigerants "SINTEC" are becoming increasingly popular not only in the Russian car market, but also in Ukrainian, Belarusian and Kazakhstan, and even in the countries of far abroad. The quality of antifreeze can be reasoned for a very long time, but it is worth noting that Obninskorgsinzinz engineers, which manufactures this antifreeze, for many years improved manufacturing technology. Now the company has its own scientific test department, which is engaged in the introduction of new technologies.

The company itself assures consumers in the fact that its products meet all international requirements and standards. This also provides certificates of conformity and the presence of tolerances to use from producers Volkswagen, Man, Volvo, VAZ and many others. It should also be noted that the company's refrigerants were recognized by many automotive publications the best. But find out if there is really so good enough products, only the auto owners will help you who used these antifreeze.

Cooling fluids "SINTEC", which can be used in any vehicles and under any climatic conditions are manufactured in all types:

• silicate;
• hybrid;
• carboxylate;
• elevords.

Sintek options

As you already understood, the refrigerants "Sintek" can be found in the store in different variations. What do they differ among themselves and which one is better? We will talk about it further.

The refrigerant "Sintek" is offered to the consumer in several types:

• "Universal" (blue);
• "Euro" (green);
• "Ultra" (red color);
• "Gold" (yellow color);
• "Tosol OH -40" (blue color);

According to the data from the official manufacturer, the composition of these silicate refrigerants there are no nitrates and other substances that are formed by carcinogen in chemical reactions. I.e cooled fluids Companies are theoretically compatible with all high-quality refrigerants.

Automotive manufacturers require antifreeze manufacturers to ensure their products vehicle Minimum mileage of 30 thousand kilometers. But Antifreeze "Sintec" have a balanced package of additives that allow you to increase the use of a coolant from 100 to 120 thousand km.

As for the working range of temperatures, it is from -40 to 108 degrees Celsius for all of the above five types of refrigerants. As you can see, synthek antifreeze have different colors, but the same life and operating temperature range. But the manufacturer has several other types of refrigerant sold refrigerants, which are worth it separately:

• "Suite" G12 (red-orange color);
• "Premium" G12 + (raspberry color);
• "Anliand" G12 ++ (purple color);

"Lux" is a carboxylate coolant (coolant), which does not contain silicates, nitrites and amines. These refrigerants were approved by domestic autocontracens "VAZ", "KAMAZ" and many others and are able to protect the cooling system of auto from corrosion. The life of this fluid is 250 thousand kilometers. It is also compatible with the main types of rubber components of the cooling system.

Premium is an improved carboxylate refrigerant with an increased service life, which differs from other toosols with a high heat transfer coefficient. This is achieved as a result of the fact that the coolant does not cover the surface of the system details of the protection layer, but only creates a thin film in those places where corrosion may occur. In addition, according to the manufacturer's assertion, this refrigerant can provide excellent protection of the system in extreme climatic conditions.

Also, "Premium" does not contain additives that can create a precipitate in the system nozzles. Antifreeze is recommended for most types of cast iron and aluminum engines, and its service life is about 250 thousand km of run. On the operational qualities of the refrigerant significantly exceeds traditional antifreeze.

"Anliam" - this refrigerant is the lass and the only one, produced in the territory of the post-Soviet space. As in the case of the "premium", the coolant creates the finest protective film in those places of the cooling system, where corrosion may occur. The main difference of this type of refrigerant is its unlimited life.

We will deal with what is the red antifreeze of synthek G12, the reviews of motorists about the product, as always, will help to form a more accurate representation. In passing through the green modification of the antifreeze of synthek G11.

Red SINTEC LUX G12 is made according to carboxylate technology based on the fact that the so-called corrosion inhibitors are attached to the bulk.

Characterized by low freezing temperature and high temperatures boiling. Technical characteristics are as follows.

What feedback is prevalent in the estimates of the Red Antifreeze Sintec Lux G12? What is more - advantages or minuses?

Advantages of synthek products red G12

1. Almost everyone is satisfied with the ratio of "price-quality".
2. The product provides claimed corrosion protection.
3. Does not need a frequent replacement.
4. The system does not freeze even at temperatures below -30 ° C.
5. Antifreeze synthek Red G12 is almost universal, it can be used at any age.
6. There is a convenient and reliable packaging.
7. Comfortably with this antifreeze both in the heat and in the cold.
8. The goods are resistant to foaming.
9. In the process of operation, the red coolant is not much precipitate and the color does not change (even after 200,000 km of run).
10. Notified by the owners of the machines that the product does not corrode rubber (seals, glands, etc.).
11. Due to red color, you can quickly detect leaks in the system.

Disadvantages of red antifreeze SINTEC LUX G12

1. It can be conditionally attributed to a slightly short service life. According to the reviews of some owners, it had to be changed after 3-4 years.
2. In some regions, red antifreeze is difficult to find, a deficit is observed, judging by some reviews.

Output: antifreeze Sintec. LUX G12 is an excellent product with good features. It works great in all engines, gives sufficient protection of all cooling systems, protects parts from corrosion, as well as freezing or overheating.

Antifreeze Sintec. green G11 was created based on the synthesis of corrosion inhibitors with high-quality monoethylene glycol.

Specifications.

Pluses of green antifreeze synthek G11

• The goods do not corrupt the gaskets, as well as the coolant hoses.
• It is operational in the wide range of temperatures.
• Effective against overheating, (as well as freezing), prevents the formation of air and other traffic jams.
• It has excellent anti-corrosion properties.
• Guarantees the stable functioning of the cooling system.
• At a fiscal price has good quality.
• Confidently "keeps" the temperature of -35 ° C (according to the reviews of some car owners - and to -37 ° C).

Cons antifreeze synthek G11 (green)

• Perhaps only one is marked: also a product deficit in some regions. In online stores, judging by the reviews of the owners, they buy antifreeze synthek G12 red and synthek G11 green while fear. A lot of fakes.

Antifreeze SINTEC - technical fluid for cooling in the middle segment. Has an unlimited service life.

Products are distinguished by universality, it works under any climatic conditions regardless of type power aggregate. The ruler is represented by a variety of goods that fully complies with industry standards.

Hybrid technologies involving the use of inorganic and organic additives are used for production. Special additives create the required positions for protecting the engine and radiators. The formation of deposits, corrosion, the appearance of overheating or freezing is excluded.

Antifreeze production and supplies Sintec

Antifreeze synthek Red G12 and other commodity units are produced in the city of Obninsk, on the specialized plant Obninskorgsintez.

Special solution is obtained using the latest technologies and from high-quality materials. The product is known in the CIS countries and far abroad.

Varieties of antifreeze Sintec.

On the modern market Sinteke G12, G12 +, G12 ++, G11 comes into the ruler. Features and specifications are presented in the table below:

This product got a carboxylate basis. For the manufacture of ethylene glycol based technology through synthesis of organic origin.

Import additives are used to give appropriate properties. The latter do not have amines, phosphates.

Used in power units subjected to high loads. Products ensures corrosion protection, no overheating and excessive cooling, clogging prevention. Co. is recommended for Volkswagen and MAN.

Sintec Unlimited G12 ++ is considered a hybrid product for the production of which the bipolar decomposition of ethylene glycol is applied. Technical fluid Without limiting the exploitation period, uses functional, foreign additives.

There are no nitrates, nitrites and other destroying chemical elements. The advantage of antifreeze is considered mixing with other products, which does not have phosphates, amines. It is intended for motors with an increased load.

Antifreeze SINTEC LUX is a universal carboxylate product that is produced by the new technology with the addition of organic. The solution does not contain borates and silicates, which gives the duration and correctness of the equipment.

The product is intended for power units, including auto industry AvtoVAZ OJSC. The technical fluid is allowed to use KAMAZ, MAN, Volkswagen, Gas and MAZ in car engineering.

Antifreeze Sintec Ultra - new generation techniques, suitable for diesel engines and gasoline engines, including forced. Products of the company for a long time protects the equipment, prevents corrosion and clogging.

The composition of the solution without amines and nitrites, there are powerful additives for various purposes. The product obtained thermal stability, the temperature regime runs out within -45 / +112 degrees.

SINTEC GOLD G12.

SINTEC G12 Yellow antifreeze is a specialized fluid obtained through the synthesis of ethylene glycol and the introduction of special additives.

Used for Russian and foreign carsCreates the right temperature mode. The presented product does not include destructive chemical elements. The operation of the power unit is soft, there is no corrosion and deposits. The time is unlimited time.

Sintec Universal G11

Antifreezes of synthek are located in the lineup another universal product G11. Cooling fluid received good characteristics Due to the basis of monoethylene glycol and the addition of special specials.

The presented commodity unit copes with the average and severe exploitation conditions, supports the required mode of operation of the equipment.

The cooling system does not freeze, which does not damage the gaskets, hoses and seals. The composition does not have destructive chemical elementsWhat guarantees an increased period of use. The appointment is wide, used for domestic and foreign cars.

The green antifreeze of synthek is considered to be unique products derived through innovative technologies. The product includes import corrosion inhibitors for reliability.

Application diverse, poured for passenger and cargo transport. Heavy conditions Operation is not a problem for the solution, it concerns the temperature regime. Water pump resource is extended by the effect of separate lubrication.

How to distinguish fake?

The manufacturer's products have become popular, which caused the appearance of non-original products. It means that original product It is purchased only from an official distributor.

Buying on bottling or with hands entails unjustified risks of rapid wear and failure of the cooling system.

Blue antifreeze synthek or green, this is not an indication of which product is necessary. The specification and access tolerance is important. However, the chromaticity is a factor that helps buy a product. During the purchase, be sure to evaluate the quality of the packaging.

Technical fluid should have complete information For each parameter, what is applied to the label. On the central picture there is a quality certificate icon.

What does new canisters with antifreeze look like, the main differences from the old packaging - video

In addition, the package contains data for communication. Since 2017, the company has changed the logo and has become enlarged to write the freezing temperature and class. The latter is highlighted in a special unit and placed in the center. All products are in new design.

Specification and approval

The manufacturer delivers products that meets the requirements and standards of the regional and global market. Antifreeze Sintec Unlimited, Lux, EURO and other varieties are available to Europe, where are popular.

As for admission issues, it is presented in the table:

When and how to use?

Attention is paid to the specifications and the possibility of applying to a certain brand and model. From this depends the duration of the operation of the equipment.

Drain is carried out using specialized suction devices, ensuring the removal of dirt inside the nozzles.

note

It is impossible to pour the concentrate, you should be pre-diluted with distilled water. The proportions depend on the manufacturer's recommendations, which is described on the package. It is not recommended to use antifreeze of different specifications that have another composition.

Signed peculiarities

Produced CJSC Obninskorgsinzenz.

Carboxylate is made according to the latest technology of organic additives. It is a water-glycolic solution with organic corrosion inhibitors that do not contain nitrites, nitrates, amines, phosphates, borates and silicates.

Designed for all modern enginesHigh load, especially aluminum. Provides excellent protection of the cooling system from freezing, corrosion and overheating, effectively protects against the formation of deposits in cooling channels, in the engine compartment, in the radiator and the water pump.

Since 2011, antifreeze SINTEC LUX OEM G12 is used by the largest Russian automaker OJSC AvtoVAZ as the first fill on the Lada cars, and is also recommended for use in their operation and maintenance.

It has tolerances from OJSC AvtoVAZ, Volkswagen, MAN, OJSC KAMAZ, OJSC "Tutaevsky Motor Plant", Avtodiesel OJSC (Yaroslavl Motor Plant), Fuzo Kamaz Trux Rus, JSC Minsk Motor Plant, "Gas Groups".

Antifreezes of the Sintec brand are supplied to the assembly conveyors of many foreign automakers who collect their cars in Russia.

It should be noted that the manufacturer's website contains the register of tolerances of own cooling fluids.

Test results

Antifreeze Sintec Lux OEM G12 without any problems passed all the tests. The temperature of the start of crystallization of the composition turned out to be -41 ° C, the temperature of the distillation was 100 ° C, and the mass fraction of the distilled fluid at 150 ° C did not exceed the threshold of 50% and amounted to 47.69%. Also within the normal range, the parameters of the hydrogen indicator were 7.65 pH. The boiling point was 109 ° C, which is higher than the requirements of the regulations for 4 degrees.

In this case, the test for the corrosion impact of the composition on metals showed its inertness. Almost all metals SINTEC LUX G12 activity is two or more times lower than the requirements of the Technical Regulation.

Summary

Antifreeze SINTEC LUX OEM G12 showed nice results. He sat in all the requirements of GOST, and its use of automakers in the conveyor assembly of cars in Russia only adds to him attractiveness in the eyes of the consumer.