Fiat Ducato Maxi with the rear pneumatic suspension. Pneumatic suspension for Fiat Ducato Install the pneumatic system on Fiat Ducato with your own hands

A set of auxiliary pneumatic suspension on the back axle is installed in addition to the standard versative suspension of the car allowing you to reduce the load on the springs, increase the comfort of the car and improve car cargo characteristics. Installation of pneumatic feeders will allow you to transport more cargo without loss of controllability, will save the springs and breakdowns from sending, will reduce the splitting of the body with rolling. By purchasing a set of pneumatic suspension from the manufacturer on Fiat Ducato you get a solution to increase the service life of the standard spring suspension. Installation of auxiliary pneumatic suspension does not require special skills and occupies an average of 4 hours. Install a set of auxiliary pneumatic suspension possible: in our workshop, in any car service, as well as with your own hands. Additional installation of the crossbar in some products is necessary in order to remove the torque from the upper brackets, which in turn occurs, when placing pillows with a displacement relative to the frame axis.

Features of the pneumatic suspension on Fiat Ducato:

• Reducing the explosion wear with shock absorbers (regular springs on your car last longer, because the air suspension will reduce the load on them, as well as on other suspension elements)
• Elimination of noise, vibrations of suspension and bump strikes during overload (the situation is completely eliminated when a commercial car falls into the bump stop)
• The ability to install on the tired springs (after installing the springs requiring replacements last for a long time)
• Proper position Body for any load (always horizontal position of the body of a commercial car in independence from the load, and this is the correct work of the head light with a reduction in the brake path)
• Reducing the rolls with the rocking of the car (the pneumatic suspension does not allow the car with the rebound board, and is always in a horizontal position)
• Increased comfort for the driver, passengers (a significant increase in comfort when driving on cars in bad and uneven roads, both for the driver and passengers (on passenger minibuses)
• Increased profit from traffic (pneummatore is an opportunity to transport 1.5 times more cargo for 1 flight + savings on the replacement of spring, as well as traffic police finals for overload
• Ability to control the ride of the car when loading and unloading (adjustment of the rear clearance to align the floor of a commercial vehicle with a floor level of a ramp for convenient downloads)
• the durability of the air suspension (does not require any additionally maintenance, and it works effectively for 5 to 6 years under any operating conditions whether it is frost, dirt, salt or reagents. Operating pressure up to 15 atmospheres)
• It is possible to increase comfort with the soft move
• The effect of "goats" is eliminated

Additional control options:

• Possible installation of the control system with adjustment from the cabin
• The system can be installed on 1 contour (general pressure in pillows)
• For two contours ( miscellaneous pressure In the pillows, reduces the star, allowing independently aligning the left and right side)
• Ability to additionally install a compressed air receiver in order to increase the speed of operation (pumping) of the air suspension, and add the ability to connect pneumatic instruments, such as wheel swap or pneumatic signal

Contents of delivery

The pneumatic suspension kit is designed specifically for the car and includes two pneumatic elements, mounting brackets for frame and bridge, fasteners, accessories for pumping from an external compressor, installation instructions with their own hands.

The kit includes:

• American pneumatic elements (pneummators) of the bellows type, which are optimally chosen in size for this car. No service requires a reliable rubber cord design and serves more than 400 thousand on the range of cars in any road conditions
• elements of attachment of their own factory production from 6mm Russian steel, designed specifically under this car. These brackets are reliable, easy to install and will serve a long time. Brackets are covered with powder painting, which protects them from rust all life
• set of Russian bolts, washers, nuts for assembling kit
• camozzi air fittings and pneumatic train, in the kit there are 7 meters of pneumoshoslang, which allows you to withdraw nipple paging to any part of the car
• nipple for descent and paging by any external airlift compressor
• installation Instructions
• all equipment passed testing in different conditionsWhat gives us confidence in the reliability of this set of pneumatic suspension. The kit comes in a fully folded form with step by step instructions Installation. Unlike competitors, we do not hide something from which kits are collected and let us know the client yourself when installing it with all fasteners to make sure of its reliability with the simplicity of installation.

Installation of pneumocomplekt:

The pneumatic suspension kit is installed in addition to standard springs and does not contribute to the standard suspension elements. Consequently, this kit does not require making changes to the TCP of the car. The pneumatic oil is placed between the frame with springs on special fastening plates coming in the kit. The upper fastener plate is placed on the frame into the standard holes, an additional transverse strut is put between the attachment to enhance the frame and the load distribution. The bottom mounting plate is placed on the bridge.

On commercial cars, category B and C often arises the need to enhance the standard spring suspension. This happens for the following reasons:

• low road quality in Russia;
• long service life of motor vehicles (development of the resource chassis);
• installation additional equipment or re-equipment of chassis (HBO, refrigerator, hydrobort, tow truck);
• overloads;
• bad handling of some truck models;
• low quality factory parts (springs, sleeves, bumps).

Our company offers to strengthen the chassis with the help of retrofit from its pneumatic pillows. In contrast to strengthening additional sheets or their replacement to a more rapid profitable to introduce a pneumanese on Fiat Ducato having a number of advantages:

• the equipment set is set in addition to factory leaf springs. To install it, you do not need to disassemble the car, and you can do it with your own hands without a specialist;
• the pneumatic closure underlying the design provides optimal characteristics Suspension works with different downloads. It is possible to adjust the stiffness of the air bag of air pressure, pose this parameter for itself. This cannot be done when strengthening with additional sheets, so such machines often "goat" when driving without cargo;
• attachments on the pneumatic suspension is often lower than the cost of spare springs, which may not be rarely broken during operation;
• you can align the car when uneven loading, and even lift it a bit or lowering the board near the ramp!

In fact, everything is easier than it seems. The main work element is the pneummatore. It is also referred to as a pneumatic formula, a cylinder, a pneumatic element, bagels, a bellows, etc. installed a pneumatic element between the frame and the chassis bridge in the car using special brackets for its reliable fastening. A compressed air is supplied to the balloon, while the pillow squeezed between the frame and the bridge is trying to inflate, raising the body. It sounds simple, and in fact, each pillow can raise up to 2000 kg of cargo! Compressed air is assigned to the system of pneumatic brakes of the car, or we set the compressor system on minibuses. The piston compressor works from the on-board network 12/24 V. The driver monitors the pressure in the pillows on the pressure gauge and, if necessary, supplies pressure from them.

We are engaged in the development of pneumatic systems for vehicles since 2006 in St. Petersburg and now we have the highest experience in this area in Russia with global manufacturers. Brackets are developed by our designers specifically under each TC model, taking into account its features and undergo mandatory tests. Most often in production, we use a metal with a thickness of 6 mm with a zinc coating and powder painting, which protect it from corrosion. Pneummators are also selected in size and other characteristics on a particular car.

Being the biggest domestic producer This type of autotuning, we feel high responsibility to our customers. That is why we set themselves the following goals:

• make a pneumatorsor an affordable solution for most customers - the cost of the kit starts from 15,000 rubles and this is the most advantageous offer on the market for the set of air suspension, ready to install;
• provide high quality of our products, so we are pleased to offer our customers 2 years warranty on our pneumatic suspension;
• provide highly qualified support when choosing and further operation of our products.

So, acquiring high-quality pneumatic suspension on Fiat Ducato and installing it, you can:

• shipping more (of course, strictly within the permissible maximum mass of vehicles \u003d)
• increase the reliability of your car during the carriage of heavy loads;
• improve controllability and reduce body splits;
• adjust the height of the body when loading / unloading;
• forget about the replacement of the springs.

Installation of pneumatic suspension on Fiat Ducato

Multiple Fiat Ducato 2017 G.V. It was provided by our regular customers, Refcars on the development of full pneumatic suspension. The task is not simple but solved. The car's frame is elongated, the refresheater booth of an increased volume is installed. Now there was a task to distribute the weight of the superstructure and the weight of the boot without prejudice to the tires. The introduction of a second axis on a regular spring-sized axle package reduced maneuverability, but provided the necessary load capacity.

Pneumatic suspension As usually solved the issue of load distribution to the spring package and ensured not only comfort but also stabilization of the work of the suspension. The front axle of the car received a standard solution - this is branded pneumatic racks last generation With enhancement and taking into account minor deficiencies in early modifications. The compressor installation was postponed for the future. At the moment, the pneumatic suspension is controlled using its own compressor by pumping and fixing the pressure in pneumatic elements through the manual systems "M".

With the task, they coped in 2 days. Built 2 similar cars.

Installed equipment:
- Pneumatic racks
Modified kit under this car - 2pcs.
- manual pumping system for pneumatic elements - 3pcs.

Equipment is always available at the central warehouse of the manufacturing company Air Ride. Get detailed advice on request from our free phone professionals. hot line 8-800-333-25-74 (the call in Russia is free). Or order callback from the site.

Reviews of our buyers

1. Mikhail Chernov, Stavropol
2. PETER TANKEVICH, Moscow
3. Konstatin Ivanov, Moscow
4. Sergey Krylatov, Vyborg (Len.Obl.)
5. Gleb Sevenka, Nizhny Novgorod
6. Nikolai Glinis, Tikhvin (Len.Obl.)

For a long time familiar with this company. I bought a set first on the gazelle, then to Fiat. They gave a good discount and now I recommend it to everyone. The first set put two years ago. Everything is working. Keep it up! Thank you!

Long chose a set on UAZ. No one really offers anything in the internet. Only these guys. I bought, put and not redeemed. The truth had to be angry but because I didn't immediately understand what. The instruction read and everything turned out. Thank you!

In early December, put the pneumatic suspension on gas lawn Next. I did not think that it would be so cool to work. The pads are not big but the blows swallow perfectly. The car does not swing. To load began without fear. All super! Thank you! I will advise friends.

I drive cargo on my Fiat Ducato 2009. Tired of changing the flames of the front racks. About the springs generally silent. I was looking for a long time, I pretended to be a friend, I advised to come to this company. Especially in Peter I dare constantly. I drove on Salov 70, found them and decided that I would do a complete pneuma. Signed the next day and took the car in two days. Do not know the car! Standing like inserted. Natal already 2500km. Flying is normal. The warranty was given and a discount in the form of a pneumatic signal. Now I ride and frighten everyone with super shoe)) Thank you! Now just for you! Well done!

I was looking for a pneumatic suspension on the NEXT Gazelle. In Lower, I found a representative of this company Air-Ryde and everything set there. Quickly and efficiently. In St. Petersburg, I often. I called for diagnostics. Little poisoned air from the receiver. Everyone did and did not even take money. This is the service so service. Now where you do not suway - you need to pay everywhere and here .. I put in the bottom, I fixed in St. Petersburg and did not take a penny. Super! Everything works perfectly! Thank you!

Bought in May the lawn Next for the transportation of furniture. The long base took and after the first trips under the load understood that the furniture could stay a bunch of boards after driving through our regional roads. I began to search for forums and in the internet - there is nothing. Upset horror how. The officials on the Dunsky, who bought the car gave tel. Air-ride. I called, I found out that everything is there and you can come at least now, right there. Put everything in 6 hours. Now I am satisfied with as an elephant) I advise everyone to new lawns. The thing is useful and not expensive. But how does it work! Class!

Latest news

Acquisition of a new commercial car usually leads to the need to improve its characteristics. The pneumatic suspension of this category is not tuning, but carries an auxiliary function, saving a spring bag from a seed ...

Our online store is pleased to offer you a set of auxiliary pneumatic suspension on Fiat Ducato for independent installation - On the most favorable conditions!

This equipment is the easiest and most convenient way to increase the lifting capacity, handling, comfort of your car, as well as significantly reduce wear of the elements of the standard suspension!

Includes all the necessary elements and fasteners. Does not require the use of a special tool when installing.

When installing our set of pneumatic suspension making changes to the main nodes of the car does not occur and then does not require registration in Traffic policeand does not entail problems with technical inspection.

This set of auxiliary pneumatic suspension on Fiat Ducato you can set to:

moscow, ul. Aviamotornaya d.44.

By installing the auxiliary pneumatic system for amplifying a spring suspension, you get:

• Increased lifting capacity without damage to the car

Pneumatic powder allow the suspension to cope with loads up to 4 tons!

• Decreased wear of spring

Staff springs are unloaded and operate in "greenhouse" conditions.

• The possibility of installation on "tired" springs

Install the pneumatic produce on the springs requiring replacements and they will last for a long time.

• The correct position of the body at any download

The body is always horizontally, and this is the correct work of the head light and reducing the braking path.

• Reducing car rolls

Pneumatic powder hold the car from rolls in turns and level it with uneven loading.

• Enhance comfort

The overall increase in comfort and good exploration of road irregularities.

• Increase the profitability of your fleet

Pneumatic suspension is an opportunity to transport 2-3 times more cargo in one flight.

You also save on the replacement of springs and fines for overload.

• Fast boost of a set of pneumatic suspension

Pneumatic suspension pays off for 1-2 flights.

FREQUENTLY ASKED QUESTIONS

Question: Does your auxiliary air suspension enters the compressor (control system)?

Answer: No, not included. But we suggest purchasing it separately, with the choice of components precisely under your needs. First, it reduces the cost of the kit, because many control system is not needed, secondly, you get a product that meets precisely by your requests, and not some universal, averaged set.

Question:How much can I carry the cargo after installing the pneumatic suspension?

Answer: Now it depends only on you, our pneumoshki have huge margin of safety. But convincingly, we ask you to think about other elements of the car that you did not enhanced, now they are exactly what they are. Use the car wisely.

Question:What is the service life of your pneumatic suspension?

Answer:For proper installation and use in accordance with our recommendations. Pneumatic suspension service life practically unlimited. Of course, we do not take into account the external damage to the pneumatic element.

Question:Springs require a replacement, do you need to change them to install the pneumatic suspension?

Answer:Our pneumatic suspension kit can be installed and on "tired" springsReplacing them will not need. If the springs are broken, they still have to change them.

Question:Why so expensive?

Answer:Expensive only at first glance. Kits are created using a large number of imported components, which affects the price. But the price of the kit is comparable to the spring replacement price to new, and the pillows will serve much longer. If you consider savings on the replacement of the spring, as well as additional profits from increasing the carrying capacity of your transport, you will understand that it is not very expensive and pay offvery fast.

Question:I choose a single-circuit or two-door system?

Answer:If you use a basic kit without a control system, if you do not overload a car one way, then you will be enough one contour (Pillows are connected in one highway). For greater car stability (for example, at high body height / booth), we recommend installing dual-circuit control system.