Installing trailed to the Logan station wagon. Choosing and installing a pardark on Logan. Cons of independent installation

In the event of the need to attract the trailer, the pharg becomes an indispensable attribute of the car, including the models Renault Logan.. This item can be made by yourself. The installation of the Farkop will also not cause special difficulties and will not require significant time spending. But for this you need to know how to install the item. There is even a video on this topic.

In most cases, the independent execution of the specified process is much faster than the search and acquisition of the part in the trading network, with the subsequent appeal to the maintenance service. If there are no skills in the use of the grinder and the welding machine, then contact the specialists will be the only and rational measure.

Manufacturing process

You can also use video instructions. As it was noticed, the manufacture and installation of the headquart for cars Renault Logan does not cause special difficulties. For this purpose, we are armed with:

• grinding machine (Bulgarian);
• welding unit;
• attached below drawings (experience in reading them).

Figure 1 presents the overall plan of the product already manufactured.

Drawing in Fig.2. In the role of the base element, the power beam is positioned, by means of which the effort attached to the hook is transformed into body panels.

Fig. 3. The side bracket is depicted, which serves for fastening the main beam to the body.

Fig.4. Next Independent Detail - Hook. It is necessary for the engagement of the trailer. It is possible to make this element from a suitable pipe segment, which is bent to the desired radius using a pipe bending device. At the end to the end of the curved tube, we weld the ball tip.

In the drawing (Fig. 5) we see the flange constructive.

In Fig.6. Showing nuances of cheeks. It helps securely lock the hook on the beam surface.

In the designated drawings you can see the absence of scarce positions. All items are made personally from affordable materials. If you lambered in own power, Purchase the finished product. This will allow additional confidence in reliability when transporting heavy trailers.

The sale of a hitch is equipped with the entire list of iron parts, a set of fasteners and an electrical part.

How to mount the device?

How to install correctly, step by step? For self-installation of the element on Renault Logan, we set the car on the overpass. The pit is also perfect, and in its absence hanging the rear axle with the help of jacks. In the last embodiment, we resort to the mandatory use of anti-tarto focus.

Tool

For work we use:

• screwdriver with a slotted profile;
• keys with sizes: "8"; "17" and "19".

Before starting assembly manipulations, it will be advisable to release luggage compartment From indecent things, which will significantly increase the convenience of "operations".

1. Remove the muffler's nozzle with rubber suspension. For these purposes, press the muffler housing towards the down, then in the stretched suspension, we detect the hole that appears. In His, we wake a screwdriver, pre-lubricated in solidol, and remove the muffler, putting it later on the beam of the rear axis Renault Logan.

Important! After dismantling the muffler, its landing bracket and a suspension with a special thoroughness cleaned from the traces of solidol, since these elements during the reverse installation must be necessarily dry!

1. Next, go inside the trunk Renault Logan. On the inner surface of the "cheeks" we find plastic plugs, which are composed of the technological holes on the surface of the spars. Applying a screwdriver, easily dismantle these items.
2. Similar operation repeat under Renault Logan car. From the bottom of the hole is carefully disassembled by factory self-adhesive tape. After her breakthrough there will be a screwdriver anticorrosive processing Contours of holes through special tools (for example, mastic).
3. Now we have a previously indicated power plates on which the power beam is secured.
4. We carry out the full tightening of all bolts after 100 percent assembly, it is supposed to be the installation of a headquart. If the design is not independent manufacturing, but purchased, then it is installed in accordance with the algorithm designated in the attached instruction.
5. The electrical circuit is not complicated, so its installation does not cause any difficulty. For an error-free wiring, it will be enough to resort to the disassembly of the left head of the stern in order to study the features of switching. From the indicated headlight, you can withdraw cables for connecting lamps: dimensions, brakes and left rotation.
6. Connecting the right rotation pointer to be implemented by switching with right headache Auto.

Now you know how to install a hitch. If the hill is mounted, produced in the conditions of an industrial enterprise, on the Renault Logan car, it is recommended that it is recommended that you do not fasten the outlet to it for switching trailed electrical equipment. After all, the need for it occurs only during towing. In all other cases, it is at risk of mechanical damage. A more optimal and secure measure will connect the socket to the onboard network by the elongated cable segment with the location in the luggage compartment. Fix it on a regular place is recommended if necessary. Do not fear for deformation of the wire by the luggage lid, because even in the closed state, there is plenty of the reserve of the place for pulling the cable.

The headscop on Renault Logan can perform several tasks. Many motorists cling to the car additional trailers, other moving structures for the carriage of goods.

Preparatory procedures

We consider for the subsequent installation of the Farkop with their own hands on the Renault Logan car. To begin with a motorist you need to decide on the choice coupling device. In the presence of welding skills, the part can be made with your own hands, having a welding machine and steel available. On the Internet there are many videos and photos on this topic. In these videos for Renault Logan describes in detail the process of welding a headquart from several component parts. TO positive sides The manufacture of a hopper includes:

• saving moneySince this procedure requires a welding machine, steel fasteners and pipe bending, then the cash costs will be minimal;
• the quality of the manufacture and strength of materials is at the conscience of the owner of the Renault Logan. With the proper level of skill and the availability of good steel, it is undoubtedly a plus, but otherwise, it may turn into the sad consequences in the form of a traffic accident.

Cons of independent installation

To the negative moments in the manufacture of a pardon include the following:

• installation of self-made mounts with low quality quality may require additional time spent;
• the total manufacturing time and the subsequent installation may increase in proportion to the degree of popularity of manufacture, and in general, even with good quality welding, takes a lot of time;
• the wiring connection scheme Together with the drawings, the owner will have to be thought out independently, which in the absence of due experience is fraught with the occurrence of difficulties (closure of contacts, with poor wiring, short circuit in the manufacture of incorrect scheme, other consequences of a negative nature).

What will be required for work

In the absence of a welding machine or desire, the item can be purchased. How much is a new hitch? Its price varies depending on the terrain, but not knocked out of 4 to 15 thousand rubles. The cost depends on the type of the new pagekop.

Removable goods for transporting goods weighing up to 1 tonne will have a cost in the area of \u200b\u200b5-8 thousand rubles. Electric products, differing technological and increased weight, will be more expensive (in the range from 10 to 15 thousand rubles).

The most popular manufacturer of details for this model is the Trailer company. Products of the company "Trailer" deservedly use in demand due to the good value for money.

Fortunately, specialized stores have a wide selection of models for the Renault Logan car. With the help of the factory article (for example: 9010), the owner of Renault Logan will be able to choose the part suitable in its characteristics for this car (before purchase it is still necessary to verify the size and location of the part to the body, which is why it is necessary to make measurements of the original mounts before going to the store ). The advantages of the purchase detail are obvious:

• the connection scheme was developed by the manufacturer, taking into account the features of the Renault Logan car for any type of trailer device;
• at the manufacturer's factory, the detail passes a multiple test for strength and reliability, as in specialized Services there is a certificate of conformity;
• the owner does not need to personally develop wiring drawings for installing a headquart.

Renault Logan Handcom

To install, you need a set of tools including:

• transverse beam, side plates (in the number of two pieces);
• electrical outlet and wires to it;
• drawing S. detailed description connection process;
• fastener elements (bolts);
• availability of observation pit.

Connection process

Passes in several stages:

• first you need to drive the car on watching pit;
• next, under the front wheels it is necessary to substitute additional supports (this is necessary to give a car with the necessary stability);
• next, let go to the mounting of the transverse beam, as the foundations of the entire design: the beam is attached to the body through special holes, with bolts;
• next, it is necessary to install plates for fastening and washers with nuts for subsequent securing on the beam;
• then there is an adjustment of the ball for the clutch, its position must correspond to the longitudinal axis of the car;
• then the installation is subject to a towing hook to the pre-installed brackets;
• after completing the mechanical part of the installation of the design, it is necessary, guided by the scheme, connect the item to the car;
• to do this, turn off the car battery;
• through a special hole in the trunk, it is necessary to carry out electrical wires and connect the headscop to the standard onboard network.

We draw conclusions

As a result, the process of mounting a pardon on this car does not represent any special difficulties in any embodiment (both self-made and purchased device). The main thing to comply with the sequence of actions in the process and precautions.

The headscop is a beam with side flanges, which is attached to the spars. The center of the beam has a hook for which the trailer engages. The design of the pardon must contain a minimum number of parts. We give a drawing of the Farkop for Renault Logan of the first generation. It, that is, this drawing contains 8 elements. And then it is discussed that it is necessary to make the hitch to be compatible with the design of machines from generation II - those since 2014 produces a VAZ plant.

On how easier to install a hitch, we are told on the video.

Drawings of all parts with dimensions, option 1 (Renault Logan Phase 1 and 2)

You can make a hinge on Renault Logan with your own hands, but the drawings must be studied very carefully. If we are talking about a car from phase 1 or 2, read the text on. Drawings are not suitable for Phase 3, that is, for sedans last generation.

Design assembly

The whole design consists of three nodes - two flanges and one beam. Side flanges will be called brackets. Their drawing is shown in the photo.

Side bracket (2 pcs.)

The collection assembly includes five parts. The beam itself is a pipe with external dimensions 60 to 40. You can use a pipe with a cross section of 40 to 40, but then the cutout in the "cheek" will decrease: the dimensions 50 and 115 will become equal to 40 and 125. Everything is simple.

All details of the "beam" node

Note - Nut M12 must be welded to the flange. If it is impossible to perform the mounting holes in the pipe wall in the pipe wall. But it is better to do that - the beam should remain hermetic!

Farc drawings on Renault Logan, shown above, obtained by measuring parts included in the factory kit. Nuts and screws M12 tighten the entire design, and it itself on bolts and nuts M10 is attached to the spars. By the way, there will still be sleeves. Their sizes are given in Chapter 4.

Hook

Included, which is spent on, there was a detail with the name "Hook". We present its size.

The most important detail of the Farkopa

The diameter of the ball shown here is standard - 50 mm. We do not consider manufacturing technology.

Appearance of the Farkopa according to Drawing №1

Below is shown how the hooks from "Project 1" looks like. Read on its installation on.

Homemade for auto from the first generation

Those who do not know how to use welding, about making something similar easier to forget.

Steel sheet thickness should be at least 3 mm. The thickness of the beam walls is 2.5 mm. Less - it is impossible!

Drawing side bracket, improved option (phase 3)

For the last generation of Logan sedans in "Project 1" make changes. More precisely, the form of the bracket changes. The rest looks still.

Side bracket for the phase "3"

The distance between the mounting holes was changed. And also, the bracket itself was lented.

Farcast Mounting Technique to the Body

You need to make four sleeves, such as in the drawing. The headscop from any project is collected on the bolts and nuts M12. Well, fix it with screws M10x90. By the way, it is desirable to use counter-nuts and washers.

Additional fasteners

It is important to comply with one rule: all nuts first only bent. When the hook is assembled, you need to pull the beam back with the effort. And at this time, not a vacation beam, in turn tighten the nuts M10.

It seems that without assistant will still do not do.

Facility installation work on the car

Silencer, plug, mounting bracket

The result of all efforts is shown in the photo. Here are self-lock nuts (and M10, and M12). We wish you success.

Metal cutting technology in the garage - video example

Farca on Renault Logan is a necessary part for transportation of various goods. Constructive features The car allows you to transport up to 1200 kilograms. You can make a hook alone, welding it from the available parts, or purchase a ready-made set in a specialized store. We'll figure it out how to install it.

1 What travelery device is suitable for Renault Logan?

Definitely answer the question of which pork is better made by your own hands or purchased in the store cannot be. The first option will save money, as you need only metal, welding machine, pipe bender and fasteners. But time to manufacture and install homemade device It will be necessary much more, and the wire connection scheme and fasteners will have to be thought out independently, for which certain knowledge requires and there is no guarantee that fasteners will be reliable.

Industrial production hinge on Renault Logan has a number of advantages, the main thing is that it is thorough load tests before the release, the design of the part is as accurate as possible under a specific machine model (all the characteristics of the car are taken into account). The manufacturer also gives a guarantee on the device, and in the case of the release of the Farkop, before the warranty period, it can be replaced by returning the money spent.

The most popular version of the traction and coupling mechanism, which is easily installed and removed - removable hitch. The price of a standard parchope of this type varies within 4-7 thousand rubles, depending on the manufacturer's company.

An electric drive hitch most often has a reinforced design. Such details are recommended to be installed on more overall cars. It is designed to transport cargo weighing up to 2000 tons, and its cost will be at least 10 thousand rubles.

The flange hill has from 4 or lower seating, and for installation requires a special landing site and additional tools. It is worth noting that such types of the Farkop are found on passenger cars rarely.

Today, the most popular prefabricated teams of the Renault Logan are producing such manufacturers like Bosal, Lider Plus, a trailer, as well as Auto-Hak, Imola and Brink-Thule.

2 Factory design and installation with your own hands

The standard kit for the Renault Logan model includes the following details (we consider the example of the company "Trailer"):

• two side plates,
• transverse beam
• trailed mounting mechanism with ball head,
• electrical outlet and wires,
• fasteners (nuts and bolts),
• detailed installation and connection instructions.

For installation, you will need to put a car to the observation pit, raise hand brake And install additional stops under the front wheels. First of all, the transverse beam is mounted, which is attached to the body spars in specially provided holes. Plastic plugs should be pushed and insert the mounting plate bolts in them, you can pre-lubricate the bolts (like washers and nuts). When carrying out work, it is not necessary to remove the bumper.

On the left and right, the bolts ride the mounting plates. Next, install the washers and nuts from the kit, after which you gently tighten two bolts on each side. Tightening them until the stop should not, as you still need to adjust the position of the beam. Next, set the beam and correctly adjust the position of the coupling ball, which should be located strictly along the longitudinal axis of the car. Now install a towing hook on the brackets provided by the design and fix three bolts of the mechanism fastening. Secure the platform for the installation of the socket, once again check all the mounts and tighten them until it stops. Thermal protection can be returned to the place, the mechanical part of the installation of the Farkop has been completed.

3 Connecting an electrical outlet to TSU on Renault Logan

Process description and connection scheme are in detailed instructions Included TSU "Trailer". First of all, turn off the battery from the power, removing the minus terminal. Remove the spare wheel and all spare parts from the trunk, under the trim there is a hole for wiring, it is closed by a plastic plug. The loop connects from the plug to the connecting terminals in the trunk according to the onboard circuit of the car, the main thing, do not confuse the colors of the connected wires.

Fix the contacts in the terminal block and connect to the standard onboard network in the correct sequence (right lamp, reverse, overall lights, etc.). It is worth noting that the instruction in the kit is quite detailed and understandable, so there should be no problems with the connection, even at a vehicle car enthusiast. If you do not understand the electrician or do not understand electrical circuitsIt is better to connect a socket in the service, such a procedure is not more expensive than 1000 rubles.

When the machine is used only for riding in the city, for products or to work problems with disadvantage free space There is no car in the cabin. But if the PBX is operated for business or household needs (trips to the country, moving, and so on), then the regular luggage compartment becomes not enough to transport large cargo. Buy for these purposes freight car It makes no sense, because the passenger cars are popular today, among whom Renault Logan enters, you can equip a traction device and tow the trailer.

By the way, it is worth saying that the suspension on Logan is installed "good", so the difficult country roads are not terrible. It remains only to choose the same reliable and high-quality chain.

It is worth saying that TSU is a model product, so if you are owner Renault. Logan 2, then you need to buy a hulk on Logan 2. The benefit for these cars has an original kit with the following articles:

• 8201555829 - Original crossing for new Logan;
• 8201555830 and 8201278652 - the original set of fasteners and electricians.

You can also choose the most appropriate model according to TSU. Today there are several categories of hitch, differing in the design and maximum mass of the cargo transported. For Renault Logan, the simplest device of the type "A" is most suitable, designed for shipping, whose weight is not more than 1.5 tons. Such a model will cost about 3,500 - 5,000 rubles. The type "B" is a semi-automatic on the nut, while the carrying capacity of such a TSU will also be 1.5 tons. The rest of the models are designed for greater weight of the cargo, they are an order of magnitude more expensive and installed such parchchas inexpediently.

Useful! TsSU for Renault Logan, released from 2004 to 2012 and models under 2013 differ significantly in design.

If we talk about manufacturers, the prefabricated sets for this machine today offer companies:

• Bosal.
• Leader.
• Imola.
• Brink (Thule).
• Trailer.

Many prefer to make a hitch on Renault Logan with their own hands, whose drawings we will look at more.

How to make a hitch for Logan

Making a hook independently easy, the main thing is to be able to use the drawings and that you have a welding machine and Bulgarian at your hand.

At first it is necessary to make the main part of the future Pardarka - the power beam, which will transmit effort from the hook to the PBX body.

Then the side bracket is made. This detail will consolidate the power beam on the car body.

The next step is a towing hook to which the trailer will be cling. Usually this item is made of trimming pipes that need to bend the pipe bend. After that the ball is welded to the hook.

Guided by the above drawings, you can easily make a hitch alone. After that, no matter what you bought a TSU or made it with your own hands, the product must be installed.

How to install Pharkop

The standard set of the Farkop includes everything you need, you can only armonize with a cross-shaped and flat screwdriver, as well as precipitated and end keys. After that, it is necessary to drive the car on the flight or pit. Although Logan clearance allows you to use and bricks, with the help of which you raise the back of the car slightly.

Carefully read, running in the set scheme if you install the ready TSS.

After that, free the trunk from unnecessary trash, especially on the sides, and follow these steps:

• Remove the silencer suspension, starting from the middle of the machine and ending with the elements located at the "Glushaka himself". For details easily removed, use any lubricant.
• Disconnect the muffler, leaving it on the back of the beam.
• Find on the spars in the trunk the technological holes provided by the manufacturer and pull out the plugs from them. To do this, it is enough to pry them with a flat screwdriver.
• Find holes in the side member, which are hidden under the protective film. Using a cruciform screwdriver, squeeze them inside the trunk, it is easier to break through the film. Repeat the procedure from the opposite side.
• Collect the hook, starting with the side plates to which the central transverse beam is attached. At the same time, do not tighten the bolts too much.
• Adjust the bowl position. This element should be only along the longitudinal axis of the machine.
• Install towing hook.
• Install the platform provided for the outlet.
• Make sure everything is installed smoothly, after which you can safely tighten the bolts.

After that, you can return the silencer to the place. However, it is necessary to wipe the body to clean them from lubrication and other materials.

It remains only to connect the rosette of the headquart.

Connecting electricians

Some car owners prefer to use a socket only at the time of direct trailer transportation. This is due to the fact that when driving around rough terrain or with "unsuccessful" parking, this element suffers primarily. A socket can be connected to a used car and remove into the trunk.

Useful! Disconnect the car bar before connecting the rosette. To do this, it is enough just to remove the minus terminal.

To connect to the automotive network you only need to conduct a power outlet from the TSU itself to one of back. The electrical is connected according to the following scheme.

These are standard connectors for 7 contacts for passenger trailersBut there are also models on 13 pins, which are most often used when transporting trailers. If the pinout is different, it is better not to wise and buy an adapter.

In custody

Installing a pharg for Renault Logan will not be difficult, as well as the independent manufacture of the design of the traction-hitch. This car It is capable of transporting quite overall loads, but it should not be forgotten about the speed limitations (no more than 80 km / h) and the correct location of the things that are transported.