How to paint and how to restore the leather steering wheel? Verified lifehak. Restoration of the cabin: painting the steering wheel at home Painting of the leather steering wheel with your own hands

September 4, 2018.

For a comfortable and safe drive in the car, it is important to have a comfortable chair, a spacious salon and a reliable steering wheel. The leather salon gives prestige and respectability to the vehicle, and emphasizes the high status of the host. A special role is played by the steering wheel, covered with skin. It is convenient and pleasant during the control feel in the hands of natural material. It delivers additional pleasure and provides security. But whatever the owner did not have been careful, as if carefully he did not treat his own transport, with the time of the steering wheel, it loses initial View.

Ways to eliminate defects on the steering wheel

Wearing coating, the loss of the initial type of patch requires eliminating the shortcomings. These include: the appearance of spots, small cracks, pulp, scratches. If large holes or torn slices are noticeable on the surface, the restoration of the skin on the steering wheel becomes problematic. In this case, it is better to use the services of a specialized studio to make a new draw game. With minor defects, you can restore the steering wheel coating in the following ways:

Use the services of the auto repair shop. This option will require considerable financial costs. It will be necessary to pay for the material and the services provided.
Wear on an old cover cover, which will create a driver certain inconvenience. Thickened steering wheel will increase coverage, complicating car management.
The most reliable and budget way to eliminate deficiencies is to restore the leather handlebar with your own hands, which will require several hours of labor and small financial investments on the purchase of materials.

With this task, even a newcomer can cope with that having no appropriate skills. A simple procedure can be performed in your garage, prepared thoroughly to it.

Restoration work materials

To return the attractiveness, protect the coating from the negative impact of the external environment, extend the functionality, you need to purchase everything you need. A rich assortment of auto shops does not limit buyers in choosing means used to care for leather products. Sold ready sets with instructions. You can pick up separately each component:

Runkelovka or "Liquid skin", filling minor errors, making them imperceptible.
Polyrol, restoring surface.
Cleanser.
Degreaser.
Fine-grained and large sandpaper.
Special scotch for painting works.
Painting water based water.
Kraspopult, brushes or airbrush.
Tampon from foam rubber.

Collect everyone requirements, You can begin the first stage of work, which is to prepare for the main process.

Preparation of the working area

To carry out restoration work, it is not necessary to dismantle steering wheel. This is a time-consuming process, it is fraught with the danger of damage to the steering mechanisms with the driver's incompetence. You can do the interior protection by taking the front panel with a polyethylene film, fixed with scotch. It will fight from pollution of paint surrounding details.

In order to renovate the skin on the steering wheel, without exposing the risk of paint to other surfaces, you need to remove the steering wheel, without causing harm to mechanisms. To do this, disassembly, be careful and adhering to the following sequence:

Disconnect the minus terminal from rechargeable battery. This will prevent closure.
Align the wheels and put the steering wheel to the "right" position.
Remove the bolts and remove the plugs.
Loosen the steering wheel overlay bolts and lift it.
Disconnect the connectors where the airbag wires are attached, with a screwdriver, not a touch capsule of the pillow.
Make the steering location marking by putting a label on it and the main shaft.
Unscrew the nut and remove the steering wheel.
Using a screwdriver, remove the facing plastic and lining from the steering wheel.
Unable details thoroughly close the scotch.

Restoration of the skin on the steering wheel

The second stage begins with a thorough inspection and analysis of all damage on the steering surface. To do this, it is necessary to wash it well with a soft foam sponge so that all flaws are visible. Having revealed the shortcomings and determining the amount of work, you can start restoration:

Take the emery paper P400 or P600 and process the surface.
To go through the second time the fine-grained emery paper to the matte effect to get rid of the old paint and increase the grip new with the skin.
Degrease the surface.
Shake "liquid skin" detected flaws.
Apply a reducing agent to the surface, rubbing into the skin. Give dry and repeat the procedure (the number of layers depends on the skin of the skin).
Collect the renovated surface.

If the coating is not very worn, perhaps, after restoration, do not need paint for the steering wheel. After removing cracks, dents and scratches, and careful processing of "liquid skin" the steering wheel will gain aesthetic appearance. If this did not happen, proceed to the staining procedure.

Painting leather boobs

The selection of paint depends on the quality of the material from which the steering wheel is made. If the steering wheel of the car is covered with vegetable oak skin, it is better to use soft painting materials. Chrome tackle requires a more rigid dye.

Water-based paint - perfect option for all skin types. It is easy to paint the leather steering wheel by any way of applying. The simplest is painting from the aerosol can. After surface preparation, the dye spray over the entire surface. To lay the layer evenly, the spray can be kept at a distance.

After drying the composition, the surface should be polished. The procedure is repeated to the perfect result.

There is a simpler way. Well, if there is an opportunity to use an airbrush, it will help save the material, put a smooth layer.

It is possible to carry out a brush procedure, a tampon or with a sponge. Each next layer is uniformly applied to the purified and ground surface, without waiting for the final drying. This method was called "painting in wet".

After complete drying, the surface is processed by a matte or glossy fixer. It is possible to operate a freshly cut steering wheel after 12-14 hours.

Such painting of the car's steering wheel will provide him with an attractive look, good condition and long service life.

Restored Rule Care

Proper car salon care, careful attitude to the felling wheel warn the appearance of unwanted defects on the surface of the steering wheel. But if the steering wheel has lost its ideal initial species, stopped delighting when contacting him, you need to save it from scuffs, cracks and scratches. Restoration.

In order to extend the operation time of the renovated patch, you need to constantly monitor its condition, clean from dirt, to process with special soft, delicate means: car ships, lotions or wet napkins.

Soft sponge dipped in a solution with shampoo, you need to clean the surface from dirt. In hard-to-reach places you can use a toothbrush. If pollution is strong, you need to leave the solution for several minutes. Then wash away and wipe the soft wind dry.

Wet wipes will get rid of small contaminants and moisturize the skin. This method is convenient because it does not require training. Especially popular with drivers use children's cleaning napkins. They are always at hand. At any time you can get and rub the surface.

Regular care does not require a lot of time and money, it will help to avoid casualization, stickiness and other signs of pollution, will significantly extend the pleasure to go comfortably, keeping the well-kept leather wheel of excellent quality.

The handsome steering wheel emphasizes the competent and spectacular design of the machine. Of course, the appearance of the steering wheel should not be screaming and distracting the driver's attention.

But the driver of his own car is more pleased to contemplate a good hand color of the beloved car in the parking lot, when landing in the car, when leaving it, and in the road to throw a cautious look at the beauty at hand. Of course, the passenger and other people who have noticed beautiful changes in the car will be nice.

Specialists of our company Car-Stile are very responsible to paint the steering wheel. a passenger car And if you want to paint the steering wheel in a car inexpensively in Moscow, contact our company confidently.

Examples of root skin restoration

A little about car steering wheel:

the cleaning of the old layer should be particularly thorough, then after painting and applying the protective layer, any irregularity from the old paint will stand out;
all defects must be eliminated before the start of work and the surface under painting is properly degreased;
the paint is applied with a pulverizer under high pressure so that there is a deep penetration over the entire surface;
do not check the drying of the paint with your fingers, expect the period specified in the instructions for use;
be sure to apply the protective layer after complete paint drying, the requirements are the same.

The room in which the painting of the steering wheel will be made, should not be dirty, dusty, cluttered all trash. Best if specialists in a good workshop will be painted. Attempts to make high-quality and spectacular painting at home and independently fail.

Painting the steering wheel - prices in our company are quite affordable, all operations are produced in exhaust technology, efficiently and on contractual terms. Differences of brands and models of cars, the timing of their release, the state will not affect the excellent end result.

The steering wheel of your pet in the cabin is the most contactable place, therefore the surface of the steering wheel is subject to greater wear and can lose its attractive look. We not only can return the old look to him, but also to make it even more beautiful, without breaking the overall design of the beautiful salon. Surface safety with a new painting company guarantees for quite a long time. Stock Foto Paint steering wheel presented on site.

Our company has mastered many types of services to prolong the appearance of the car and its design. After our service, your car will become even more beautiful, attractive on external and internal design. Updates of the appearance and interior of the car will not require big investments. All types of services, their cost and order order can be found on the website of our company.

A solid discount is provided to regular customers of our workshops.

To restore the surface leather steering Optionally access to the service. Today, the choice of auto chemicals is quite wide, which makes it possible to easily prepare, paint and properly care for the landscape with your own hands. In addition, the process does not take a long time, and the result and minimum cost only will delight the owner of the car.

Choice of paint and compositions for skin restoration

Each motorist is sooner or later faced with the need to restore the surface of the steering wheel, especially if the material is the skin. It is quite reasonable for solving the problem would be to contact the service, but a more rational way out of the situation is to recover with your own hands.

The range of auto shops today allows you to choose all sorts of funds not only to care, but also to restore the skin. The quality of the coating service life is directly dependent on the quality of components.

For the steering wheel of the skin there are cosmetics and higher quality, which is special creams and impregnation to protect. Such means are endowed with an extended functionality, which allows to remove the passage pollution and prevent the emergence of new ones.

By the way, it doesn't always have to resort to painting and removal of the old coating to update the surface. With the help of special creams, you can restore well-preserved coating. Selected them follows the characteristics and presence of the word in the "Restorener" instructions. According to the effect, such funds are similar to the use of Gutalina. They do not remain traces on the palms, and the cost is available.

Of the materials and tools for working to restore the leather coating will be needed:

"Liquid leather" or a spattle for the skin;
polyrol reducing agent;
means for cleaning the skin - gasoline-helix or white spirit;
malyary Scotch;
paint, better on a water basis;
sandpaper with grain grain 400, 600, 1000 and 1200 units;
airbrush or paintopult;
tampon foam.

It is worth noting that it is optional to dismantle the steering wheel: painting can be performed directly inside the car, pre-defending the part of the cabin near the control body. Choosing paint should also come from the quality of the material. When equipping a car with a wheel of vegetable oak, it is necessary to choose soft paints, since high absorption is characteristic of the product. If the steering wheel is made of chrome tap leather, then the paint in composition should be more rigid due to lower absorption.

If the skin of the steering wheel has a black color, it is enough to purchase a standard paint for the skin. If the steering wheel of another color (brown, beige), then several basic paints will be required for mixing and obtaining the desired shade.

Coloring of such a steering wheel will require not only the presence of suitable paint of two colors, but also special accuracy

Preparatory stage

Before starting work, it is necessary to cover the torpedo and other elements (knitting and steering keys) to protect against paint with polyethylene and painting tape. If the steering wheel is planned to be removed for painting outside the cabin, it is necessary to weigh all the "for" and "against", since there is a chance of damage to the steering mechanisms during insufficient experience. With a dismantled steering wheel, painting is more convenient, but most of the car owners cost the interior protection.

Rule with car

In the event that the steering wheel is still dismantled independently, then do it in such a sequence:

Deafling the steering wheel, disconnecting the terminals from the battery.
Before starting work, you need to deractine the steering wheel, for which we remove the terminals from the battery
The steering wheel turn to the "right" position.
The end key turns away the bolts under the plugs.
Weaken steering wheel bolts.
To remove the details of the stretch it up and disconnect the connectors from airbag, while the capsule itself does not need to touch.
Before turning out the nut, it is advisable to put marks on the shaft and the steering wheel.
Turn off the nut and remove the steering wheel.

Restoration of the painted surface

At the next stage of preparation, it is necessary to remove all damage: cracks, dents and scratches on the steering wheel, which were formed during operation. Then you can estimate whether the complete steering is required or not.

To identify all skin damage, it needs to be chopped thoroughly. In this case, it is better to use the satellite P400-P600. Such processing will allow you to remove not only the old paint, but also provide the best grip of the new coating with the skin. When rough treatment is completed, i.e. the paintwork is removed, you can use the emery paper P1000 - P1200.

Then the leather steering wheel is well degreased for uniform staining and improving its quality. It is best to use a special cleaner for leather products. In extreme cases, "White Spirit" will fit. Since the skin after grinding has a property to easily absorb such a kind of substance, the rag must be saved slightly. If the steering wheel is abundant to impregnate the "White Spirit", then the material will be simply wrinkled and overwhelmed.

Before the painting steering wheel must be prepared: the surface is processed by sandpaper to remove the paint and varnish

Often the situation occurs when the initial layer of paint is removed, and irregularities on the steering wheel after treatment with abrasive still remained. In this case, several ways to solve the problem are possible:

the surface is leveled with the use of air conditioner for the skin, after which they produce a grout to the polyrolla;
scratches poured "liquid skin" (spit), after the surface is dried and matured;
apply shoe wax for coarse skin, cyanoacrylate, as well as varnish for a female manicure.

Coloring Leather Auto Steering

To cover the Branca, it is best to use water-based paints, the more well-fit for any type of skin, and it is easier to work. On average, about 20-30 grams of paint is spent on the painting of the steering wheel, in the event that the color is selected independently.

If there is an opportunity, it is better to use an airbrush, since the tool will allow not only to save the paint, but also apply a uniform layer. One of the most available options Staining is the use of paint for the skin in the canopy, which is applied to several layers with interlayer drying.

In the extreme case, you can use a foam tampon. It is best to apply paint to perform in several layers (2-3). As a rule, the subsequent layer is applied immediately, which will ensure control of paint absorption into the material.

After staining, you need to apply a protective layer of varnish (matte or glossy). Such a coating will retain the surface in good condition for a longer time. By temporary costs, the recovery process takes about 5-6 hours. In fact, the work is not time-consuming, but requires accuracy and attention, it is not hurry. If you get paint on the glass, it can be carefully solvent No. 646.

Painted surface care

With long-term operation of the car on the steering wheel, the sweepers remain. However, they can be avoided by using a leather case as protection, which is especially relevant for drivers with rings on the fingers. Moreover, the replacement of the pole will cost cheaper than hauling or restoration of the steering wheel.

If the option with a cover is not suitable, you can use inexpensive silicone polyrollas. With such means, an invisible film is created, on which all loads are imposed. The main condition is periodic beam processing.

So that the leather surface of the steering wheel served as long as possible, the material must be handled in a timely manner. special means Cleaning and skin care

To prevent serious damage and extend the life of the leather steering wheel, the material is necessary and, most importantly, to carefully care for the material. First of all, the skin requires cleaning, for which special cleaners apply, allowing the dirt from the helm. The sequence of actions in this case is such:

The tool is sprayed to the surface, then we expect a few minutes.
Material wipe with soft cloth and reproduce the cleaner again.
To clean hard-to-reach places should be used toothbrush.
At the end of the procedure, the surface is wiped with a dry cloth.

After cleaning the steering wheel is subjected to treatment with air conditioning for the skin. As for the operation of a freshly staked steering wheel, then you need to wait 12-14 hours, and it is better to leave it alone for a day. In addition, during the week, the leather surface should not be wiped with wet napkins. With properly completed work, the new coating will serve for quite a long time.

Video: Methods of painting leather steering wheel with her own hands

To restore the leather handlebar with your own hands, it is enough to purchase the necessary materials and get acquainted with the sequence of actions. The work is not time-consuming, but requires care and accuracy. If the steering surface does not give in to recovery, you can wear leather lamp Or drag the wheel with new skin.

The skin on the steering wheel is raised over time and grieves. Many motorists solve this problem, closing the inclined cover of the steering wheel with a cover. This, of course, spoils a balanced and harmonious interior often pretty expensive car. Therefore, the best solution in this case is painting the steering wheel, especially since mostly defects are only a cosmetic character - the protective coating is damaged, while the skin itself on the steering wheel remains in relative order.

Painting the steering wheel is simple, accessible to each motorist procedure, especially since the steering wheel for the last to take is not at all necessary. Of course, for a more thorough painting, this can be done, but the difficulty of dismantling and the risk of damage to the car airbag mechanism is reduced to not all the advantages of working with a steering wheel removed.

Therefore, before the start of the procedure, you need to prepare a place of work in the car, defending dashboard From getting into her coloring substances. It is possible to do this with the help of conventional polyethylene, carefully fixed on the greasy tape. The latter also need to be used to enhance the spokes and buttons on the steering wheel.

Needed auto chemicals

For work, it will take not only paint. In professional auto repair shops at various stages of preparation and directly color, a whole set of modern auto chemicals is used:

Special degreaser is extremely effective for the initial removal of oil, oily spots and contamination on the skin of the steering wheel;
Cleaner of the skin of the car, plastic surfaces and vinyl;
Absorbent agent that removes deep-entered fat stains of sweat and oil on the skin;
Pasta-shtclowing "Liquid leather", designed to remove scratches, cracks and strong sweetes on the skin;
Water-based paint for the skin and vinyl car interior, high-quality reducing color of these materials;
Matte finish coating is also for vinyl and the skin of the steering wheel;
"Stitcher" - provides the highest resistance of the finishing layer on the skin to abrasion by the formation of additional chemical bond.

However, independent painting, of course, does not oblige you to acquire you all this set, and some expensive chemistry can be replaced by cheap analogues, for sure you have already previously used and available in stock.

Cleaning and sistering

Before painting the car's wheel, the car's steering wheel should be carefully taken to increase the surface of the contact of the material with a coloring matter and to remove the old, already places of irradiating coating. Abrasive grain should be chosen based on the rigidity of the material. Typically, for initial training, sandpaper with P400 and P600 numbers is suitable, and directly painting the steering wheel must be carried out after processing the softer "skin" P1000 or P1200 or a gray scottch-bright.

Some irregularities and surface defects on the old leather coating of the steering wheel can be eliminated, and does not succeed. In this case, one of possible options sealing such scratches:

puttailing - processing of the skin defect steering with a special paste-shp can, so on. "Liquid skin", followed by drying and matting - stripping with soft abrasive material;
alignment - processing of a damaged section with special air conditioner for the skin with a subsequent grout of softened skin with a polyrolol;
using cheap grade materials - shoe wax, cyanoacrylate, and even nail polish.

Behind the cleaning of the surface it follows its degreasing, and only then - painting. For the absence of professional cleaners to get rid of the remaining shameless fat spots on the skin, you can use the usual White Spirit. It should be remembered that the skin absorbs such products very well, so it should not be abundantly pouring them on the steering wheel. It is enough just to wipe it slightly watered by White-spirited with a microfiber cloth or other similar material.

Staining the steering wheel

Painting is made by spraying directly from the paint spray on the steering wheel, however, if you wish, you can save it by selecting a roller or even a brush for applying, since the excess of the cutting substance will not be in this case. The kind of paint will need to choose depending on which skin was used to finish your steering wheel:

If it is a combined or vegetable tossing, characterized by high absorption, then use a rather large amount of paint of soft compositions;
Chrome oak, characterized by weak absorption, requires a smaller amount of paint, and the aggressive formulations can be used in this case.

Typically, the leather products are painted with dipping them entirely into the coloring composition for several seconds. However, for the steering wheel, this method is not applicable for the steering. Therefore, the paint is required to apply in several layers, and it is possible to do it and "in wet", without waiting for a layer of paint dry.

Restoration of the car's steering is often simply necessary procedure. This is due to the fact that with constant contact of the driver with this part, the coating of the steering wheel is wear out, scratches appear, stains and scuffs, all this makes the ride process less comfortable, and significantly spoil the appearance of the car's salon. To solve this problem, drivers use four approaches:

buying a new part and install it in place old. Very expensive event, and often it is not at all acquitted waste of money, especially if the steering wheel works properly.
appeal for help in the car repair shop. In this case, in addition to themselves supplies You still pay a solid amount for the provision of services.
wear on the steering wheel. Nice a budget optionBut many drivers do not like that the thickness of the coverage increases and the control becomes less comfortable.
painting the car's wheel with your own hands, for example in the garage. This is a budget decision, it will be necessary to buy materials to restore the coating and spend a few hours of their time. In fact, in the whole procedure there is nothing complicated in the whole procedure, and you will be quite able to cope with this task.

How to choose paint and consumables?

If you decide to restore the steering yourself, you will need materials to restore and paint this detail. It is important to understand that the choice will depend on the budget that you are willing to spend on this procedure. For example, there are both "folk" options for paints and professional solutions. Most. simple option Painting precisely the leather steering wheel is the most ordinary skin reducing agent, which can be bought almost in any auto store. But the main disadvantage of this tool is a briefness. Layer of such a coating at intensive operation vehicle Quickly erases, and if you bought a budget version of the reducing agent, then you are not insured and from traces of paint on your hands, which is also an unpleasant moment.

Another budget decision is the applying of creams for the skin that are sold for painting jackets and shoes. These funds do not relate to the class of car cosmetics, so they will also quickly wear, and can leave traces in their hands. Here you will turn on and nail polishes that you can cut scratches and chips on the steering wheel.

The best solution will be the selection of precisely professional paint for painting the steering wheel, as well as regenerative means. These include liquid skin, with which they restore various mechanical damage and complete wear of the coating on the steering wheel, paint for automotive skin, air conditioners that smooth out the material and polyteroli to eliminate scratches and irregularities on the surface of the part. There are also means for removing fat spots from the skin, which, in any case, are formed during contact with the coating.

If you want to get a matte type of steering at the output, then for the finishing layer, paint uses special matte covers that eliminate gloss.

When choosing paint, repel from the skin type on the steering wheel. With a vegetable or combined tossing of the skin, paints with a soft composition are used, with chromium tacking, the solid and dense compositions of the materials applied are used.

Here is a list of materials that will be needed for work:

malar tape and protective film.
absorbent to remove replace stains.
grinding paper.
degreaser.
liquid skin.
paint for automotive skin.
scotch-Bright.

Also on the market there are ready-made sets for painting the steering wheel, which can be bought on auto markets.

Prepare the surface

If you are not an experienced master, then we do not recommend it yourself to remove the steering wheel, as you can damage the wiring or fastening, which will require additional financial investments. It is better to work carefully right in the cabin, but at the same time preliminarily prepared the working area. To do this, with the help of painting tape and films, you get all the nearest surfaces, this is the instrument panel, and windshield and buttons on the steering wheel, etc. We only leave that part of the steering wheel, which we will paint.

Before painting the skin on the steering wheel, it is necessary to carry out restoration work, and this technology consists of several basic steps.

Grinding. Using emery paper, the P400 - P600 brand is grinding the surface and remove all small scratches and chips. If there are a lot of such damage, then we clean the steering wheel completely.
Now we take the paper of the brand P1000 - P1500 and completely mature the surface to increase the surface adhesion with appliant materials. Also for this task you can use scotch-bright.
If fat stains are present on the steering wheel, they can be removed using the absorbent.
Now restore leather coat With liquid skin. It is applied to damaged areas, waiting for drying and then grind fine-grained emery paper before receiving a homogeneous surface. Also, in addition to liquid skin, putty pastes are used, after which they are also grinding.
All wrinkled areas of leather are treated with air conditioning and polyrolla.
Detail degreasing.

When degreasing the coating, it is important not to take a lot of material, as the skin can freeze. It is important to apply a degreasing agent and immediately begin to apply paint, do not wait for the surface to dry.

Apply paint

The technology of painting the leather car steering wheel can be in two formats:

Using an aerosol spray. But in this case, it will be necessary to take almost the entire salon to cover the film so that it does not get paint anywhere, and I needed for a long time and you need to rub it away with a solvent.
Use brushes and paint with cans. In this case, it will be more comfortable to work, besides, you can fully control the consumption of the material.

They put paint on the steering wheel in several layers and at the same time there are no complete drying between them, and the material "in wet" is applied. The whole process of painting will take about 30 minutes. You can use the means to give a matte effect as the finishing layer if the gloss is not satisfied with you.

What about plastic and wooden inserts on the steering wheel?

If your car is plastic steering wheel, then the approach is similar, but there are several differences. This is primarily the preparation for painting the steering wheel. You will also need to sand the surface using sandpaper, and degrease it, but for degreasing, either antisilicone, or alcohol, and in no case are not acetone, it corps this material.

Paint paint on plastic in several layers, then a matte coating is often applied. But when repairing this type of steering wheel, the LCP does not hold for a long time and with intensive operation of the car, it starts to lose appearance and collapse. Here the outlet can be a good leather case.

If we talk about wooden inserts, then they usually serve well, but there are minor scratches from rings or other mechanical damage. You can eliminate them with polishing, and deeper scratches can be carefully filled with a transparent nail polish.

Cargo care

It is important not only to restore the coating on the steering wheel, but also to correctly care for this item, then she will serve you for a long time and will delight your external species. First of all, you need to constantly wipe the steering wheel and hands with napkins to avoid the formation of oily spots, which will then be difficult to withdraw. The second is the use of car care products, or just breed the detergent for the body in water and wipe the coating with a rag. For this, regenerating funds are applied to the steering wheel, waiting 10 - 15 minutes and then climb them with a cloth. Such an approach will provide a longer service life of the steering.