Is it possible to paint the car's wheel. How and how to paint the wheel of a car? Choosing materials and technology restoration of the coating. We restore the leather steering wheel

the main / About cars

Today, the quality of modern chemicalsUsed to paint the car's wheel, improved significantly. Also, the Painting procedure itself has become less laborious. Therefore, if for achieving good result Previously, it was necessary to contact the specialists or even just replace the steering wheel on a new one, now you can safely paint with your own hands.

How to paint the car's wheel

FirstlyYou must determine what type of material (skin, plastic, tree) intend to paint, and, accordingly, choose paint for the steering wheel of the car. Manufacturers offer various types of dyes, which you can purchase in automotive, building stores, as well as household chemical stores.

SecondlyIt is clear that it is easier to carry out procedures with the wheel, which is removed from the car, but sometimes the removal process is more difficult, rather than the process of staining, so you need to stock up with a scotch or painting ribbon, polyethylene film, old newspapers, or all that can protect the surface of the cabin from entering Paints in unnecessary places.

Choosing paint, remember that its price can be directly related to the resistance to erasures. Insofar as steering wheel Actively used, and this property of the coloring agent is important, we advise not to save. The methods of applying paint include: application using an aerosol or a tampon (roller).

What instrument will need

You must thoroughly prepare for the staining process. Paint is the main, but not the only component in this process.

For preparatory stage It takes sandpaper of various grainability (No. 400-500, 1500), putty (for each type of surface) and a spatula, if necessary, means for degreasing (you can alcohol or white spirit).

For the coloring process you need Caller with paint or paint, tassel, roller or sponge, everything you need to protect the cabin, also solvent (which is used in case of paint on glass or car panel), protective gloves, electric hairdryer, acrylic skin fixer.

The preparatory stage plays a very important role in the process of staining. It will be directly dependent final result. Therefore, it is necessary to approach the preparation.

If there are felling places on the steering wheel with stuffed paint, they need to be cleaned with sandpaper (No. 400-500);

If there are cracks or irregularities on the steering wheel, they can be used for special paste. It is purchased in the auto shop. After drying, the paste (approximately half an hour) it must also be stuck;

The entire surface of the steering wheel must be stuck in shallow emery paper (No. 1500). This procedure contributes to a more resistant paint engagement for the surface of the steering wheel;

The process of degreasing the surface of the steering wheel can be carried out using special chemicals, or using the White spirit or alcohol. Apply a small amount of means on a soft tissue and wipe the steering wheel. Do not overdo it with the amount of liquid for degreasing, otherwise, if the surface is leather, it can be cut and shoved.

The process of painting steering

Most. simple way Staining will be aerosol. Coloring the can, make sure that the paint is sprayed not at a very close distance and evenly, otherwise the surface will be spotted. After drying, the paint surface is polished with a fabric without a pile. The staining process can be repeated several times, achieving the desired result. But if you have chosen another way, the problem of the brushes or tampon, the result will not be worse.

How to paint leather steering wheel

As for the skin, there are dyes that are slightly improving her color, that is, it restores it and dyes with a more resistant effect. Than paint leather steering Your car, you must choose, based on the state of the steering wheel.

Painting can be produced by all kinds of paints for the skin. It is clear that in some instructions they write that the leather product must be dipped into the paint. With the wheel it is not always possible. Therefore, the paint can be applied with a brush, tampon or sponge layers, without waiting for their drying. The skin should be evenly painted, but not excessively impregnated with paint. To accelerate the drying process, you can use a hairdryer. After complete drying, the steering wheel can be covered with a special skin fixer. It happens with matte and glossy coating.

Painting plastic steering wheel

More often, cars are equipped with a steering wheel, which is covered with plastic. Plastic over time also loses appearance. You can paint such a steering wheel, but the paint wipes quickly. For better engagement paint, handle the steering wheel with sandpaper. Before painting you need to deflect the steering wheel. Degreasing is necessary to spend alcohol in several steps to an absolutely pure tampon.

White spirit will not suit, because it can dissolve plastic. The paint is better to use in the cans. Staining to hold layers from a long distance. The solvent in the paint should not have time to influence the plastic surface, so the paint layers should be thin.

If you decide to paint the plastic handlebar with a tassel, you should know that this kind of paint has a long drying period. Isolate steering wheel in a car salon from dust in the air for a long time is very difficult. If it does not scare you, then you know that it is necessary to paint the plastic with a brush with a thinner layer, so pressing the brush tightly, and the excess paint carefully wipe on the edge of the jars. In this case, the angle of coloring should be perfectly the same.

The perfectly smooth steering wheel may turn out if you end the wax polisher. She will remove the errors that did not hide the painting. But this is already dangerous, because the steering wheel should still perform direct functional duties. A hitch with hand palms has an important meaning in this process.

If you have a wooden steering wheel, then you are the owner of a prestigious car. Wooden steering wheel is very resistant to damage, as expensive high-quality varnish is protected. But if you still need to remove several scratches, it is possible with the help of shallow sandpaper and a special grinding paste. And if the scratches are too big, and serious restoration is required, it is better to trust it with specialists, because for deep grinding it is necessary to use a grinding machine. It is clear that this process involves the mandatory removal of the steering wheel. Yes, and the field of polyurethane varnish requires special conditions.

As a state of the steering wheel, you can say a lot about the driver and the use of them vehicle. Therefore, if you decide to sell your car, it is necessary to give the steering wheel a proper look.

If you do not sell a car, the good condition of the steering wheel will delight you constantly. Usually, to save the steering wheel in proper form and for the convenience of use, drivers wear a leather case on the steering wheel. If necessary, it can be easily replaced, and the steering wheel always remains in good condition. If the case does not fit you, then you need to use protective silicone polyroli. They protect the surface by creating a thin protective film. It is necessary to apply them regularly as soon as the surface ceases to glisten.

If you still decided to paint the steering wheel, then we will treat the process responsibly, and the result will bring pleasure and pride for your hands done.

The cabin of your car looks great, but you begin to notice that the paint is getting sunpacing on the steering wheel and unesthetically "propellas" appear? Of course, the skin itself remains in good condition, but it is necessary to paint the steering wheel urgently. In any car service you will quickly make this work. But not necessarily contact the service, because there are pretty in the auto shops big choice Various chemistry to paint the leather steering wheel. Moreover, work takes a minimum of time.

1 Preliminary works - what should be done before starting?

To properly choose the paint, you need to decide on the material from which the steering wheel is made. In our case, this is the skin. Selecting the paint, pay attention to its value. Dear more resistant to erasure. By purchasing a tool, apply a bit on any leather object, and you can make sure the product. The paint for the car's wheel is sold in the cans, but you can use a brush or tampon to work. If the surface of the steering wheel has a combination toss, then you need to purchase a soft dye. With chromium tossing, paint can be used with a more hard composition. Working conditions with dye are described on the balloon itself.

The most important thing is: the room temperature should be plus, and the humidity is low.

From permanent contact with hands on the steering wheel, cracks can also be formed, which can also be primed. To do this, you need to purchase a special putty. To the surface of the steering wheel before painting to align, buy sandpaper. We also need a special degreaser to remove stains from oil, fat and sweat hands. Many motorists brilliant glossy coverage do not like too much. So that the surface of the steering wheel after painting has become matte and velvety, take a special matte coating.

The steering wheel before painting is good to remove. But if you have never dismantled it, think, do you cope, because there is a risk of damaging the item. In this case, you can leave everything on the spot, but to purchase a large package for the full closure of the panel and everything that the paint can get, and also buy a greasy tape for pinning cellophane.

2 Prayer steering wheel - how to get an excellent result?

So, proceed to work. First, close the parts that do not need to be restored: the knitting needles on the steering wheel, the control panel, the floor and the seat. Then polished the sandy spaces to ensure the best coating with the skin. Then take a more fine-grained abrasive and grind to the matte state. If the cracks are too deep, you need to smear their paste from scratches and cracks.

Degrease the steering wheel with a special cleaning agent for leather products or ordinary White spirit, if there are plastic elements - medical alcohol. Many degreaser are not applied, because The skin at the helm can shrive down and crack even stronger. Wipe the steering wheel with a soft cloth so that there is no dirt and fat.

Color the car's wheel is completely simple: it is easier to spray the paint from the sprayed paint, but it is harder to control its quantity. You can use a sponge or brush, wetting it in the liquid paint. If you are more convenient to apply spray, we applied with cautiously withdrawn movements into several layers. It is not necessary to wait for a complete burnt of the layers. Just continue to apply the next layer. The steering wheel should be painted evenly, and not just strongly saturated with paint. Working with a brush or sponge, you can control the consumption of funds, which will be cheaper.

If the glass still got drops, use the solvent. I do everything quickly, you do not stop in one place. So that the surface is dried, use the hairdryer. We are still a little longer before the final drying and we apply the finish matte coating. It will ensure full fastening of paint on the surface of the steering wheel.

All work on painting the steering wheel can take just a couple of hours. It is advisable to work in a closed room so that the dust does not hit the surface in the surface. Treated steering wheel Leave the clock for ten and within a few days do not wipe with wet fabrics. To paint with your own hands for someone, maybe unusual, but it is much more profitable than to work for a hundred.

3 Care of the wheel - why do you need polyroli?

Subsequent care for the painted steering wheel should not be ignored until the next paint. We regularly use the means for caring for automotive skin or water with a water shampoo. We apply a small amount of means, we are waiting for some time, we wipe the soft cloth. Everything will take no more than 15 minutes.

Often scratches on the steering wheel appear from rings on the fingers of drivers. To keep the steering wheel in good condition, many car owners buy a case. If you do not want to use covers, periodically use silicone polyters, which for applying form a protective film. As soon as you see that shine disappears on the surface of the steering wheel, put the polyrolol.

Put in order the leather steering wheel is quite easy. It all depends on how you are suitable for this case, from choosing materials and quality of work. Let the first time you will be all in a novelty, but with what pride you will say that we updated the steering wheel.

A few years ago, the high-quality painting of the car's steering was considered quite problematic. However, today technologies have emerged, allowing to make this work quickly and efficiently thanks to special techniques and the latest paintwork materials.

The steering wheel can be painted, without even removing it from the car. First you need to leave all the elements that are not subject to painting on the steering wheel, and must be covered with cloth, paper or film torpedo area.

So, what do you need for high-quality painting of the steering wheel? Let's deal with ...

Preparation of the steering wheel to painting

Before painting the steering wheel, it needs to be carefully prepared. It will depend on this appearance, and it must be flawless. Preparatory operations are performed in the following order:

Slap and loss steering places with old paint need to be cleaned by the emery (R-400 or P-500);
Gloss is removed (so that the paint is well kept) with a gray scotch-bright or emery (R-1500);
Degreasing steering;
Application of leather cleaning (sold in canisters);
Degreasing and wiping microfiber.

If the old coating becomes bad to succumb to emery processing and remain strong irregularities, then you can scap the steering wheel with a special paste to eliminate cracks, scratches and scuffs, which is available in any automata. Typically, such a paste dries 30 minutes and is preparing with the help of the same sandpaper or scotch-bright. Paint can be chosen by a special catalog in the store.

Actually the process of painting the steering

The restored steering wheel must be covered with paint so that the colors of soft and flexible materials are refreed. To do this, you will need (pulverizer) and compressor. Then you need to cover the steering wheel with a finish matte coating for the skin and vinyl. This can be done almost immediately (wet wet). It remains to unpack the steering wheel and ventilate the salon.

On a note

If the paint falls on the glasses, it is easy to remove the 646th solvent. At the same time, it is necessary to be careful that the solvent does not hit the steering wheel, as it hurts fresh paint.

Of course, painting cars with your own hands, including the steering wheel, takes time and some knowledge relating to. However, from a financial point of view, it is much more profitable than the services on a qualified service station, especially if you have the simplest painting gun and compressor.

Restoration of plastic steering wheel

Not all cars are equipped with a steering wheel in a leather shell. In the commercial segment of the steering wheel, most often covered with soft plastic. However, they even wear out and lose the original appearance.

Painting plastic working surface of the steering wheel is easy, but for a long time such cosmetic repair is not enough. Any paint with the active operation of the car will be watched. However, plastic steers are also painted, for example, during pre-sale preparation.

Before painting it is very important to carefully degrease the contact surface of the steering wheel. It always has a lot of fat, because the wheel is kept with palms. Degreasing plastic is best to produce alcohol. Solvents on acetone can eat plastic!

The processing of the steering wheel with alcohol perform at least three times. First dissolves dirt and large fatty baits. All this is cleaned with a cotton swab until he stops dirty. Next, you need to take a pure tampon, moisten it with alcohol and wipe the steering wheel once again, then give plastic to dry and repeat the procedure.

Despite the fact that the plastic is dissolved with acetone, paint in the cans can be searched for painting. But it is necessary to apply it from a long distance and very dosed. In one pass, so many paints are sprayed so that its solvent is evaporated for a few seconds, not the time to affect the polymer. So, having a layer behind the layer, you can paint all scuffs.

It is difficult to say how much the paint will last on the plastic sheath of the steering wheel. Everything will depend on its quality, the number of layers, as well as from the type of plastic. The highest quality painting is made with preliminary stripping small emery. The rough surface of the plastic has better adhesion.

How to deal with wooden linings

On elite cars, steering wheels can be installed, decorated with elements made of natural wood. They wear out infrequently, because they are protected by very high-quality varnish. But if the driver wears the rings on the fingers, then the lacquer can scratch.

A small scratch on the lacquered wood can be tried to refuel. To do this, it is first stuffed with sandpaper, and then, gradually reducing the grain and polishing the paste, the surface is adjusted to the ideal. If the scratch is too deep and is in a prominent place, the steering wheel will require a solid restoration.

Deep scratches on the varnish must be completely stabbed. On the steering wheel, this work can be done manually, but it is easier and faster to grinding a portable borders with a nap of a suitable diameter. For a good result, it is better to grind the whole element - then the new lacquer will be perfect.

For the vanishing of the wooden steering wheel, it is recommended to use high-quality polyurethane varnish. It is the most durable, wear-resistant material with sufficient elasticity. Cheap varnishes are quickly wiping, and they can crack, peel and so on.

Steering wheel

The steering wheel often judges the state of the entire car. The shaft steering wheel with a small mileage of the car causes a suspicion. However, there are several ways to keep a good appearance of the steering wheel.

If the driver carries on the fingers of the ring, then it is better to protect the steering wheel with a leather case. Permanent contact of the helm with metal will necessarily have consequences. Case can always be replaced, while contact surface The steering wheel will remain untouched.

Manufacturers modern cars Show care of man driving. The steering wheel of the current cars is not at all what twenty years ago. This is a comfortable, pleasant to the touch product reliably handed. But five, seven years of operation passes - it becomes smooth, erased, slippery. So, it was time to install the leather steering wheel of a car and painting it with their own hands.

Removal

Restoration of the car is carried out by the following main operations: dismantling, braid, painting, installation of the steering wheel in place. The order of removal of the beam with the steering column of the car:

Disconnect the cable terminals from the battery.
Carefully disable AIR BAG.
Release without twisting completely, fastening nut in the center of the steering column. Strongly swing the ram up, down. When she gets back from the slots, completely unscrew the nut, remove the steering wheel.

To then install the beam correctly, it is necessary to mark with a marker or a thin screwdriver its position on the slots.

Preparation

Works are performed in the garage, workshop, shed. Required tools And materials:

skin segment - natural, high-quality substitute, eco-tree, Alcantara;
nail file, grinding sand 1000 units;
paint on the skin from Motip;
porous soft polyurethane;
polyurethane glue.

The steering wheel must be prepared under the skin and painting. Surfaces are cleaned with a nail file, sandpaper. Rust is removed, oil spots, dust, dirt. The operation allows you to adjust the thickness of the steering wheel under the driver's preference. Typically love a thick ram.

The optimal thickness is not more than 40 mm. For extremals permissible 50 mm. Polyurethane is well kept warm, so such a steering wheel is always warm with any frost and soft, which is nice for hands. Top of polyurethane branch of a car is trimmed with skin. For this there are several technologies.

Sheaving

Asia manufacturers, the United States coat steered four slices of leather, four sutures are obtained. The Germans are tightened by one piece of leather, one seam "Macrame" is obtained. The work is very neat, aesthetic look, pleasant driving of the car. Japan and Korea are used to cover the seam "pigtail" or "Christmas tree".

But the main thing is not the configuration of the seam, but its quality. The steering wheel hold the driver's hands all the time, it should be comfortable, not slippery, without roughness, sharp edges, thick threads, a beautiful structure.

Before the trim, it is winding up with a food film, then the mounting ribbon.

A marker is applied with a markup, a stationery knife is cut in all circuits. Removed, the components of the sketch are smoothed. Having imposed it on the skin, the parts of the braid with a bunch of 5 mm are cut with a knife. Details are stitched by one round ribbon, soaked in warm water for 20 minutes.

Labels are applied to cardboard every 8 mm, where the holes make their way. Shov must be done smooth. Having done 10 holes, sew, then again 10 holes - sew and so on. It is necessary to work slowly, carefully looking at the result every 15 minutes. The purified steering plane is deguted with a napkin, moistened with alcohol or acetone.

Painting

When the alcohol dries, glue is applied, the steering wheel is tightly tightened with a soft porous polyurethane. The leather case is worn from above, it is sewn with a middle section threads. A primer painting is applied from the sprayer on the steering wheel. The soil dries 2 hours, then the thin layer of main paint with thorough rubbing. Drying a hairdryer, or you need to wait 1 hour when the painting of the first layer of the car steering is dried.

After drying, the paint fixer is applied, drying with a hairdryer. It is brought to the consideration of the painting of the steering wheel of its car with a polyroller. It is applied to a soft woolen napkin, the steering wheel is polished with circular motions. Then put in place, fixed with a nut. Everything is performed in reverse sequence.

Outcome: updated steering wheel

Painting and replacing the leather steering wheel of their own car completed with their own hands. The update was successful, the steering wheel as new. Fresh paint shines, the rabble is comfortable, reliably falls into the hand. Ahead of thousands of kilometers of new roads, the conquest of which will be interesting and fascinating. Nor nail or rod!

The steering wheel is located in the cabin. But this location does not save it from erasing and mechanical surface wear. Decides the problem - painting the steering wheel of the car. The steering wheel suffers from dirt and sweat transmitted from the hand of the driver. This fact should be taken into account when choosing a tactics of painting this important control unit. The procedure should bring not only beauty and image, but also convenience when controlling. If, after the procedure for updating, the skin of the hands will stick to the surface of the steering wheel, and it is quite real - this will negatively affect the control of the vehicle.

Choice

How to paint the steering wheel? Most importantly - before starting work, it is necessary to carefully study the composition of the materials you are going to use. It is possible that they may not be compatible with each other. It is best to buy what is set. This approach will guarantee the maximum success. This work is divided into two cycles. To fulfill it with your own hands at home will not be difficult.

Restoration of skin

The update is not always accompanied by painting and eliminate the dilapidated, worn coating. Excellent preserved leather coat It is possible to restore with the help of specialized equipment and creams with suitable properties. They can be selected according to the characteristics and availability of the term "reducing agent". The duration of the service of such creams is not very different, the effect has similarity to the effect of Gutalina. These substances are not dirty palms, with a strong heat they do not flow, it is acceptable.

In order to prevent destruction, you can use cleaners and impregnation for leather products. They slow down the process of damping the skin of sweating, dirt and other factors. Remove the leather ruling necessarily. This is a very difficult job for such purposes. The main thing is to take care of the protection of dashboard and seats in the cabin. Polyethylene will help, fixed with scotch. And you still need to protect the knitting needles and the helm buttons.

It is restored with the fact that it is necessary to open the surface and remove the old coating. This work will increase the area of \u200b\u200bcontact of the coloring substance and the material of the steering wheel. The most important thing is to remove the residues of the paint that rests very poorly and will disappear in the near future. The abrasive of standard rooms is suitable - P400 and P600. Before the painting itself, the abrasive substance is softer - P1200 or P1000. After removal of the original paint, it often finds out that due to the cracking of the leather coating, non-removable irregularities remained.

To do this, you can apply a number of techniques:

Available way. It will take shoe wax for very rough skin, female nail polish, cyanoacrylate, some substances used in folk practice.
Putty. This is a scratch pouring with a "liquid skin" or a similar substance, followed by drying and matting.
Alignment. This is a fill of the damaged place with air conditioning for automotive skin and grout soft material with a polyrol.

It is forbidden to ignore degreasing the surface of the steering wheel. But it is important to consider that the leather coating absorbs such a means. Therefore, it is not necessary to unsterly watered a sterling plane. The watches are performed a little moistened napkin or microfiber. It is best for the skin cleaner on the intermediate period before staining.

Powered steering

The easiest way to spray the coloring material from the cylinder to the surface. But then will be big flow Aerosols. Loss can not be called tangible, but more practical hosts use a foam roller or a conventional tassel. A lot of coloring substances are invented. The market is filled with impregnation for leather products. The main thing is to choose the skin of the skin:

If it is chrome crushing, then the absorption is small. It is necessary for a small color of the coloring agent with rigid and, possibly aggressive compositions.
With a combined and vegetable oak, absorption is large. Very soft substances and very large volume will be required.

Many manufacturers advise not to wet the skin, but immerse the stained object completely. The impregnation leaves from 5 to 20 seconds. But in our case, it is unrealistic. Apply the coloring substance falls in several stages. There is an option with the combination of recovery paint and a matte coating for the skin and vinyl.

No need to wait for intermediate drying. It can even harm. It is necessary to paint "in wet". And the use of multiple layers will help control the process of absorption. If the paint fell on the glass or other parts of the cabin - use the solvent No. 646. But take care of the steering wheel from this substance. To remember is about personal security. Precautions Read on the package.

Paint for steering in auto shops. You can purchase it with the help of online space. Price depending on the volume of the spray, the prestige of the brand, price Policy Seller. Alternative option - drag the steering wheel with new skin.