Stand DD 10 01 Technical Economic calculations. Control and adjustment and diagnostic equipment. Additional equipment and equipment for repair of TNVD, fuel equipment
Computer booth DD 10-05E for testing and adjusting the TNVDdifferent types, including with high injection energy of domestic and imported production with a cyclic supply of up to 250 mm / cycle with a plunger diameter up to 12 mm (12-section, asynchronous electric motor 15 kW, frequency converter). Menzur measurement system. The thermal stabilization system. Built-in superchard system. Built-in rotameter. Management through the monitor. Autonomous thermal stabilization system, upper location of the dimensional block. Full set Brackets for edema. and imp. cars. Built-in prior charge. Built-in rotameter.
The stand is designed to diagnose and regulate the TNVD type:
133,175, 185 and their modifications with a cyclic supply of up to 250 mm2, injection pressure up to 120 MPa, as well as motor TNVD Motors of type YAMZ-238, YAMZ-240, YAMZ-8401.10, YAMZ 850, YAMZ 7511, YAMZ 845.10, YAMZ 8421.10, YAMZ 84 23.10, YAMZ 84 24.10, YMZ-236 BE (not), YAMZ-236 m2, YAMZ-236A, KAMAZ-740, KAMAZ 7408, ZIL-645, ZIL-0550, GAZ-5424, GAZ-5441, KDZ-744, D-65, d-260, 64nsp 18/22, 6DM-21A, DGP 200/750, d-245.12, SMD-31, SMD-31B, SMD-62, SMD-62T, SMD-31/32, A- 01M, A-01 ml, A-01 MTG, A-41E, D-440, SMD-60, SMD-72, SMD-64.
Bosch in line: k, m, mw, a, b, bv, p. Distributive TNTVD: Bosch, Lucas, Zexel, Denso.
Diagnostics is performed by playback Rotation frequency of the drive shaft of the fuel pump high pressure (TNLD), temperature and fuel pressure, measuring the specified parameters, as well as cycle feed, fuel consumption supplied to the test object, the angles of the beginning of the injection (injection) of the fuel, turning the injection lifting coupling, deviations of the heading angles (injection).
Stand 05E Computer Stand for Testing and Adjusting TNVD Different types, including with high injection energy of domestic and imported production with a cyclic supply of up to 250 mm / cycle with a plunger diameter up to 12 mm (12-section, asynchronous electric motor 15 kW, frequency converter).
The standard package of the stand 05E the stand includes:
Set of brackets, transitional couplings, flanges for installation on the stand of almost all types of TNLD import and domestic production. Part basic configuration There are 12 bench nozzles, to measure the angles of the discharge and end of fuel supply by sections, the static method of measuring the hydroployment (drop per second) is used, for removing the characteristics of the injection advance focus on domestic TNVD, a strobe is included in the base bundle. In the basic package of the stand enters the Diesel Tester of the RE 3810, a set of specials. Tools for the TNVD Bosch-R series. Built-in prior charge. Built-in rotameter. Diesel Tester 3810 (TNVD RE), tool for disassembling assembly and adjusting the TNVD series RE, MWIn the 05E stand applies:
- AC electric motor with a power of 15 kW
- Direct connection of the engine shaft with a transition clutch
- Autonomous fuel thermal stabilization system
- High and low fuel supply
- A source direct current with two voltages 12 and 24 V
- withdrawal of the main operational parameters of the stand on the 15-inch display (display with the Touch Screen function)
- Rail TNTWD rail movement sensor with display screen display
- 12-section dimensional block for measuring cyclic feeds with small and large volumes moving in two planes
- a system for stabilizing the speed of rotation of the feedback drive, which allows to hold the specified speed regardless of the load
- Built-in supervision
- Built-in rotameter
- Lubrication system TNVD with circulating lubrication system
- Equipment for diagnosing TNVD BOSCH with electronically control
- a set of special tools for disassembly, assembling TNVD BOSCH series
Checked Systems Bench 05E
Testing and adjusting the rigid high-pressure fuel pumps with an independent lubrication system, with the number of sections to twelve, as well as the distribution type TNVD by controlling the following parameters and characteristics:The magnitude and uniformity of fuel supply by sections (pumping sections performance);
The rotation frequency of the TNVD shaft at the time started by the regulator;
Rotation frequency of the TNVD shaft at the time of the termination of the fuel supply;
Pressure opening of the injection valves;
an angle for the start of the discharge and end of the fuel supply along the rotation of the TNVD shaft and alternate the supply of the TNVD sections;
The angle of the actual beginning and end of the fuel injection (in diagnosing)
Characteristics of automatic injection advance coupling.
Pneumatic regulators of inline and distribution pump
Specifications TNLD 05E.
The number of simultaneously experienced high pressure sections 12
Range of reproduction values:
Drive shaft rotation frequency, rpm 70-3000
Circuit numbers reference, cycle 50-9999
Cycle fuel supply, mm? / Cycle 0-250
Fuel Temperature, ° C 20-45
Inspection angles (injection) of fuel, degree 0-360
Corners of reversal Cellular automatic fuel injection lifting coupling, degrees 10-0-10
Fuel Pressure, MPa 0-3
Air pressure, MPa 0-30
kgf / cm? 0-2
The volume of measuring vessels of fuel stuff, ml 2-40
Price: 320 000,00 rub.
Buy
In order to buy this product, fill out the application below.
By clicking the "Send" button, you accept the conditions and give your consent to the processing of your personal data, in accordance with the Federal Law of July 27, 2006 No. 152-FZ "On Personal Data", on the terms and for the purposes defined.
Photos of work performedStand of fuel equipment
The stand is designed to diagnose and adjust the diesel fuel equipment up to 8 sections inclusive.
The following diesel engines type: YAMZ-236, YMZ-238, YAMZ-7511, YMZ-236 BE (not), YAMZ-236 m2, YAMZ-236A, KAMAZ-740, KAMAZ 7408, ZIL-645, ZIL-0550, Gas- 5424, GAZ-5441, KDZ-744, D-65, D-260, 64NSP 18/22, 6DM-21A, DGP 200/750, D-245.12, SMD-31, SMD-31B, SMD-62, SD 62At, SMD-31/32, A-01M, A-01 ml, A-01 MTG, A-41E, D-440, SMD-60, SMD-72, SMD-64 TNVD Type TN, UTU, ND, 4UNTM , LSTN. TNVD type Bosch k, m, mw, a, b, bv, p; MotorPal; Distributing TNTVD: Bosch, Lucas, ZEXEL, DENSO are diagnosed with additional equipment Supplied by order.
In the fuel stand of DD 10-01 for the diagnosis of the TNLD are used:
- 7,5kW AC electric motor high torque
- SYSTEM ENVIRONMENTAL WITH DDS
- System Autonomous thermal stabilization of fuel
- Systems and low fuel supply
- Failure-based aerial coupling
- Source Current with two voltages12 and 24 V
- System control with electronic programmable
- 8-Miscellaneous Volume System Measuring Systems With Menzurines of Small Ibol Volume
- The system stabilization of the speed of rotation of the feedback drive, which allows to hold the specified speed regardless of the load
- machikov High inertial Moment
- BasomyMap set: Kit brackets, couplings and high pressure tubes for domestic TNVD
On the fuel booth of DD 10-01, the following operations can be carried out:
- Tests adjusting in line fuel pumps
- pressure (in the future TNVD) with self-examined lubrication,
- scientation of the sections up to eight, and Alphald distribution
- the type of supply of feed fittings
- controller parameters and characteristics:
- the values \u200b\u200bare uniform fuel supply
- sections (pumping section performance);
- frequency of the TNVD shaft at the time of the beginning
- regulator actions;
- the frequency of rotation of the TNVD shaft at the time of termination
- fuel supply;
- pressure opening of the injection valves;
- correct the injection and end of the supply of fuel
- rotate from the TNLD shaft and alternating the submission section of the section;
- angle of valid beginning and end of injection
- fuel (in diagnosing)
- characteristics of automatic injection advance coupling.
Standard equipment of the Fuel Stand DD 10-01:
- 1- Bracket DD 10-00.940.000m for fastening fuel pumps TN, UTU-5, ND-21; 4TX10; 6mtn, 58;
- 2- Bracket DD 10-00.950.000 for fastening fuel pumps of the ND-22 type; PES, PVA, VE;
- 3- Bracket DD 10-00.930.000 for fastening fuel pumps of type 6t; 33, 60, 80, 90, izom; PVA (ZIL-645, Tatra); Engine pumps: YAMZ-236; YAMZ-238; YAMZ-740; S6A950 (Ikarus);
Adapters for connecting coupling:
- 1. Transport pump type ND-21 DD10-00.1010.000m;
- 2. Power supply pumps such as UTU-5 DD10-00.1011.000M;
- 3.Products TNTVD engines of type YAMZ-236,238, DD10-00.1012.000;
- 4.Products TNVD engines type YAMZ-840, ND-22, DD10-00.1015.000M;
- 5.Products TNVD engines of the YAMZ-740 type with MOV DD10-00.000.052;
- 6.Products TNVD KAMAZ 337-40, 337-70, 337-80; DD10-00.1013.001;
- 7.Products TNTVD pumps of type 4UTN DD10-00.1014.001.
1- cooler; 2- fuel tank; 3-pipelines; 4 - electric cabinet; 5, 6, 7 - throttle; 8 - support of the measuring unit; 9 - shaft output with bracket; 10-dimensional block; 11- control panel; 12- taper; 13, 14 - manometer; 15- thermometer; 16th tank of dirty fuel; 17-bed; 18- handle; 19- ground bolt; 20- dirt fuel drain
In our company you can buy Fuel Stand DD 10-01 by favorable price manufacturer. The shipment of goods is carried out from the warehouse of the company located in Vladimir. Also, you can order the delivery of equipment to your city, using the services of a transport company.
Delivery of equipment acquired in our company is carried out in all regions of Russia, Belarus and Kazakhstan. Delivery regions
Moscow, Ufa, Sevastopol, Saratov, Krasnoyarsk, St. Petersburg, Volgograd, Novosibirsk, Kaliningrad, Tomsk, Arkhangelsk, Sochi, Vladivostok, Yaroslavl, Murmansk, Voronezh, Nizhny Novgorod, Ekaterinburg, Omsk, Perm, Belgorod, Kazan, Pyatigorsk, Ryazan, Novorossiysk, Samara, Bryansk, Krasnodar, Tver, Tomsk, Kislovodsk, Chelyabinsk, Yalta, Astrakhan.
see alsoIn case of delay in the invoice and commercial offer, as well as in the event of claims to work in the sales department, contact the senior manager.
Attention! All prices on the site are excluding VAT.
Stand for testing and adjusting the TNVD diesel engines DD10-04P with 18kW drive for field repair plants and mobile repair shops.
Stand for testing and adjusting the TNLD of various types of domestic production with a cyclic supply of up to 250 mm / cycle with a plunger diameter to 12 mm (12-section, asynchronous electric motor 18 kW, Cam-M frequency converter). Stand DD1004P, designed to diagnose and adjust the TNVD of all types and modifications of used on WAT and BTBT, as well as a dual-purpose technique up to 12 sections of inclusive Diesels of the YAMZ-236 type, YAMZ-238, YAMZ-7511, YAMZ-236 BE (not) , YAMZ-236 m2, YAMZ-236A, KAMAZ-740, KAMAZ 7408, ZIL-645, ZIL-0550, GAZ-5424, GAZ-5441, KDZ-744, D-65, D-260, 64NSP 18/22, 6DM-21A, DGP 200/750, d-245.12, SMD-31, SMD-31B, SMD-62, SMD-62T, SMD-31/32, A-01M, A-01 ml, A-01 MTG, and -41E, d-440, SMD-60, SMD-72, SMD-64 TNVD type TN, UTU, ND, 4UNTM, LSTN. TNVD type B-2, B-46, B-243.
The main differences between the DD1004P stand from the DD1004 stand, is:
- The set of supply of the DD1004P stand is a frame for installing a stand in the Body repair shop on the basis of the car Ural or KAMAZ complete with fastener, screw controlled supports, nyib.8400 to exhibit the stand.
- In the basic configuration, the DD1004P stand is supplied with a set of test nozzles, a set of high pressure tubes and adapters, snaps for all above the listed TNVD WAT, BTBT and dual-use techniques.
- In the stand of DD1004P, an installation with freon is mounted for cooling fuel.
- The DD1004P stand is equipped inside the tools for heating the stand in the field of operation and heating fuel for test tests of fuel equipment at minus temperatures.
- The drive of the DD1004P stand is made in the composition dispensing box, through reducer transmission (Stand DD1004 comes with a drive directly on the TNVD test). Thus, the minimum rotation frequency crankshaft When simulating the stand can be set at 20-30 revolutions per minute against 50 revolutions at the stand of DD1004 performed 7.5 or 11kW.
- Computer control tachometer, record testimony on PC. (Included in the package software For installation on a PC, laptop).
- To install all types of TNVD for testing, the package includes full set Installation snap.
Conservation for 60 months, an increased warranty on the stand for up to 36 months, wooden packaging in two boxes (a box with a bench is installed on the euro and packaged in the second hermetic box.
Operation of the stand:
Diagnostics is performed by playing the rotational speed of the drive shaft of the high pressure fuel pump (TNLD), temperature and pressure of the fuel, measurement of the specified parameters, as well as the cycle feed, fuel consumption supplied to the test object, injection angles (injection) of fuel, turning the injection advance , deviations of the initiation angles of injection (injection).
On the stand you can carry out the following operations:
Testing and adjustment of inline, V-shaped and f-shaped high-pressure fuel pumps (in the further TNTVD) with an independent lubrication system, with the number of sections up to twinn-lump, as well as a distribution type TNVD with the amount of feed fittings by
Control the following parameters and characteristics:
· The magnitude and uniformity of the fuel supply by sections (pumping sections performance);
· Rotation frequency of the TNVD shaft at the time started by the regulator;
· The frequency of rotation of the TNVD shaft at the time of the termination of the fuel supply;
· Pressure opening of the injection valves;
· The angle for the start of the discharge and end of the fuel supply along the rotation of the TNLD shaft and the alternation of the supply of the TNVD sections;
· Angle of valid beginning and end of fuel injection (in diagnosing)
· Characteristics of the automatic injection coupling injection.Specifications Stand DD10-04P
1. Type ..... Stationary and Mobile
2. Drive ..... The electric drive from the network of industrial power supply, as well as from field autonomous energy units.
3. Number of simultaneously tested sections of high pressure TNVD, pcs., No more ..... 12
4. Playback range:
4.1. Rotation rates of drive shaft, min-1 ..... 20 ... 50 ... 70 ....3000
4.2. The countdown of the number of revolutions (cycles), about. (Cycles) ..... 1 ....9999
4.3. Fuel Temperature, 0c ..... + 5 ... .60
4.4. Fuel pressure, MPa (kgf / cm2) ..... 0 ... .10 (0 ... .100)
5. Measurement range:
5.1. Rotation rates of drive shaft, min-1 ..... 20 ... .3100
5.2. The volume of fuel vessels of a hundred, ml:
First row ..... 6 ... .135
Second row ..... 2 ... .40
5.3. Fuel Temperature, 0c ..... 0 ... .50
5.4. Fuel pressure, MPa (kgf / cm2) ..... -0.1 ... .4 (-1 ... .40)
5.5. An angle of starting fuel injection, hail. ..... 0 ... .360
5.6. The angle began injection of fuel, hail. ..... 0 ... .360
5.7. The corner of the reversal of the highway automatic injection advance coupling, hail. ..... 10 ... .0 ... .10
5.8. Cycle feed, mm3 / cycle ..... up to 250
6. Capacity
6.1. Fuel tank, l, ..... 100
7. Powered by AC and DC network
7.1. Voltage, in ..... 380, 3F
7.2. Frequency, Hz .....50 ± 1
8. Installed power, kW ..... 21
In addition, the drive motor TNVD, kW ..... 18
9. Number of service personnel, people ..... 1
10. dimensions, mm, no more ..... 1880 x 960 x 2025
11. Mass dry bench, kg, no more ..... 785
(With a set of accessories), kg no more ..... 1380
12. Installed trouble-free operation, h ..... 1000
13. Mounted full resource, at least years ..... 10
Stand DD 10-01 (ki15711m-05) (DD1-05)
Stand DD10-01 Designed for testing and adjusting the TNLD of various types of domestic and imported production with a cyclic flow of up to 200 mm / cycle with a plunger diameter to 12 mm (8-section, asynchronous electric motor 7.5 kW, Mitsubishi frequency converter) Stand DD1001 Designed for diagnostics and adjusting the TNLD domestic and imported production up to 8 sections of inclusive diesel engines of the YAMZ-236 type, YAMZ-238, YAMZ-236 BE (not), YAMZ-236 m2, YAMZ-236A, KAMAZ-740, KAMAZ 7408, Zil- 645, ZIL-0550, GAZ-5424, GAZ-5441, KDZ-744, D-65, D-260, 64NSP 18/22, 6DM-21A, DGR 200/750, D-245.12, SMD-31, SD 31B, SMD-62, SMD-62A, SMD-31/32, A-01M, A-01 ml, A-01 MTG, A-41E, D-440, SMD-60, SMD-72, SMD-64 TNVD Type TN, UTU, ND, 4UNTM, LSTN. PVA, PVB, PESA, PEA, PECM, PPM (F), JPH, WSK, PPM (F), JPH, WSK, PES, CAV, Bosch Ve are adjustable with additional equipment supplied by order. |
Stand DD 10-06 (ki15711m-06) (DD1-06)
Stand DD 10-05 for diesel engines
Stand DD 10-02
Stand DD10-02 For testing and adjusting the TNLD of various types including with high injection energy of domestic and imported production with a cyclic supply of up to 250 mm / cycle with a plunger diameter to 12 mm (12-section, asynchronous electric motor 18.5 kW, Mitsubishi frequency converter). A non-vertical measurement system. Autonomous thermal stabilization system. Stand DD1002. Designed for diagnosing and regulating TNVD type 133,175, 185 and their modifications with a cyclic supply of up to 250 mm2, injection pressure up to 120 MPa, as well as motor TNLD engines type YAMZ-238, YAMZ-240, YAMZ-8401.10, YAMZ 850, YAMZ 7511, YAMZ 845.10, YMZ 8421.10, YMZ 84 23.10, YMZ 84 24.10, YAMZ-236 BE (not), YAMZ-236 m2, YAMZ-236A, KAMAZ-740, KAMAZ 7408, ZIL-645, ZIL-0550, GAZ-5424, GAS -5441, KDZ-744, D-65, D-260, 64NSP 18/22, 6DM-21A, DGP 200/750, D-245.12, SMD-31, SMD-31B, SMD-62, SMD-62T, SMD -31/32, A-01M, A-01 ml, A-01 MTG, A-41E, D-440, SMD-60, SMD-72, SMD-64. TNLD TN, UTU, ND, 4UNTM, LSTN .. TNVD type PVA, PVB, PESA, PEA, PECM, PPM (F), JPH, WSK, PES, CAV, BOSCH VE, D6, D12 are adjustable with additional equipment supplied By request. |
Stand DD 10-04 (DD10-00) (KI-15711M-01) (DD-1-03)
Stand DD10-0.4 For testing and adjusting the TNLD of various types of domestic and imported production with a cyclic supply to 250 mm / cycle with a plunger diameter to 12 mm (12-section, asynchronous electric motor 11 kW, Mitsubishi frequency converter) Stand DD1004 Designed for diagnostics and adjusting the TNLD domestic and imported production up to 12 sections inclusive Diesels of the type YAMZ-236, YAMZ-238, YAMZ-7511, YAMZ-236 BE (not), YAMZ-236 m2, YAMZ-236A, KAMAZ-740, KAMAZ 7408, ZIL-645, ZIL-0550, GAZ-5424, GAZ-5441, KDZ-744, D-65, D-260, 64NP 18/22, 6DM-21A, DGP 200/750, D-245.12, SD 31, SMD-31B, SMD-62, SMD-62A, SMD-31/32, A-01M, A-01 ml, A-01 MTG, A-41E, D-440, SMD-60, SMD-72, SMD-64 TNVD type TN, UTU, ND, 4UNTM, LSTN. TNVD type PVA, PVB, PESA, PEA, PECM, PPM (F), JPH, WSK, PES, CAV, Bosch Ve is adjustable with optional equipment supplied by order. |
Stand DD 10-04K for diesel fuel equipment
Stand DD10-04K. Designed for diagnostics and adjusting the TNLD domestic and imported production up to 12 sections inclusive Diesels of the type YAMZ-236, YAMZ-238, YAMZ-7511, YAMZ-236 BE (not), YAMZ-236 m2, YAMZ-236A, KAMAZ-740, KAMAZ 7408, ZIL-645, ZIL-0550, GAZ-5424, GAZ-5441, KDZ-744, D-65, D-260, 64NP 18/22, 6DM-21A, DGP 200/750, D-245.12, SD 31, SMD-31B, SMD-62, SMD-62A, SMD-31/32, A-01M, A-01 ml, A-01 MTG, A-41E, D-440, SMD-60, SMD-72, SMD-64 TNVD type TN, UTU, ND, 4UNTM, LSTN. |
Stand DD 10-05E for diagnosis and adjustment of diesel fuel equipment
Stand DD10-05E. Designed for diagnosing and regulating TNVD type 133,175, 185 and their modifications with a cyclic supply of up to 250 mm 2, injection pressure up to 120 MPa, as well as motor TNLD engines type YAMZ-238, YAMZ-240, YAMZ-8401.10, YAMZ 850, YAMZ 7511, YMZ 845.10, YMZ 8421.10, YMZ 84 23.10, YAMZ 84 24.10, YAMZ-236 BE (not), YAMZ-236 m2, YAMZ-236A, KAMAZ-740, KAMAZ 7408, ZIL-645, ZIL-0550, GAZ-5424, GAZ-5441, KDZ-744, D-65, D-260, 64NSP 18/22, 6DM-21A, DGP 200/750, D-245.12, SMD-31, SMD-31B, SMD-62, SMD-62T, SMD-31/32, A-01M, A-01 ml, A-01 MTG, A-41E, D-440, SMD-60, SMD-72, SMD-64. |
Additional equipment and equipment for diagnostics of the TNLD, fuel equipment
DD-3100 Lubrication Station
Pneumatic DD-3200 Tester
Pneumatic tester TNVD DD-3200 regulator It is intended to simulate the real operation of the engine when checking on the stand of DD pumps with automatic counterpart or proofreader to boost diesel engines, with a high-altitude corrector. DD3200 Tester Pneumatic for TNTVD Regulator It is intended to simulate the real operation of the engine when checking on the stand of DD-1 pumps with automatic counterpart or proofreader to boost diesel, with a high-altitude corrector, installed on domestic cars and foreign production, as well as for checking and adjusting the TNVD with a vacuum controller (PES pumps installed on Mercedes vehicles). pneumatic DD-3200 Tester |
Set of DD-3500 brackets for fixing imported TNTVD to DD-1
Bench nozzle FS-22 (DD-3600)
DD-2110 Stand for Testing and Adjusting Diesel Injectors
Device DD-2115 to assess the technical condition of plunger pairs of TNVD engines of the YAMZ and KAMAZ (9691)
Mechanotester fuel equipment MTA-2 - DD-2120
Additional Equipment for Diagnostic TNTVD with Electronic Control and Injectors Common Rail
Diesel Tester DD-3810 (0 986 610 101)
Power supply for DD-3820 diesel tester
Universal Cable for DD-3810 0 986 610 10 2
Transition cable for Scania cars, Volvo, Iveco, John Deere, Mersedes 0 986 610 104, DD-3812
Transition cable for pumps type m 0 986 610105, DD-3813
Transition Cable for MAN 0 986 610 107, DD-3814
Device for checking the performance of diesel injectors of the system of the CR-Tester CR-Tester DD-3900
Additional equipment and equipment for repair of TNVD, fuel equipment
Set of specials. Tool for maintenance TNTVD cars KAMAZ DD-3300
Set of specials. Tools for servicing TNLD cars KAMAZ, application technique, repair manual and adjustment TNVD KAMAZ
1. and 801.21.000 Puller for pressing discharge valves
2. and 801 16 000 Fixture for removing and disassembling injection advance coupling
3. and 801 20 000 Demolition for disassembling pump sections TNVD and nozzles
4. And 801 37 000 Eccentric puller and lead gear from the cam tree TNVD
5. And 801 27 000 Fixture for the installation of the bearing of the cam shaft TNVD, the bearing of the angular gearbox
steering mechanism, power take-off drive shaft
6. And 800 11 000 Pullery nozzles with KamAZ engine
7. and 801 14 000 Engine valve adjustment fixture
8. And 801 26 000 Eccentric Extricant Pullarge Camper Wheel Wheel TNET
9. Methods for the use of the tool
Stand for disassembly assembly TNVD KAMAZ (Yazda), M-402, DD-3310
Stand for disassembly assembly TNVD MAZ (YAMZ), M-403, DD-3420
STAND M403, DD3420 for disassembly assembly TNLD MAZ (YAMZ) Designed for disassembly and assembling V-shaped high-pressure fuel pumps manufactured by JSC "Yazt", used on engines produced by OJSC "MAZ" at the stations of those services. The stand consists of a base that binds to the table; The oblique-turning platform on which the support racks are strengthened (the platform allows you to rotate the pump around its axis and tilt the pump at angles 0, 45 and 90 degrees); Platform rotation lock; clamps. |
Stand for disassembly assembly TNVD (UTU), M-404, DD-3430
Welstock locksmith-fuel cassette (1500x850x650), two-sheet SP-17-03
Welstock locksmith-fuel train (1500x850x650) Singleumbova, SP-17-06
Set of specials. Tools for disassembly and assembling TNVD type Bosch Ve DD-3700.01, DD-3700
Set of specials. DD3700 tool for disassembling and assembling TNVD Type Bosch Ve. |
Set of specials. Tool for adjusting the TNVD type Bosch VE DD-3710
Equipment for the diagnosis of diesel engine
Kit "Standard Diesel" ST-DD-4100
Set "Standard Diesel" St-DD-4120
Set "Standard-Diesel" Article of St-DD-4130
Set "Standard Diesel" Stud DD4130, tightness analyzer imported and domestic cars (g / l, l / a), those. Documentation, reference values |
Cylinder pneumatic absorption indicator (compressometer) (diesel) IPTS-DD-4200
Cylinder pneumatic absorption indicator (compressometer) (diesel) IPTS-DD-4210
Pneumatic cutting indicator of cylinders (compressometer) (diesel) IPTS-DD-4220
Cylinder Pneumatic Cylinder Indicator (Compressometer) (Diesel) DD4220 IPCD Imported and domestic cars (g / l, l / a) |
Professional equipment for working with gasoline fuel equipment
Stand DD-2200 for checking and cleaning gasoline nozzles (injectors)
Professional Cleaning Liquid for Naval to DD-2200 Technician Z
Traditional liquids for removing smiling and carbon sediments with nozzles with ultrasound often time-consuming and unsafe for a person (requires protective equipment for hands and eyes). |
TECHNIK Z Cleaner Actions
Ultrasonic cleaning uses high-quality sound waves generated by the converter built into the cleaning tank below the surface of the cleansing fluid. Ultrasonic waves lead to the emergence of microscopic vacuum holes (air and steam bubbles) under contamination, which explode. Air bubbles are circulated in solution and fall due to the high penetrating ability of the liquid - the TECHNIK Z cleaner between the surface cleaned and the contamination covers it. Bubbles stick to pollution and tear the dirt particles during the explosions of vacuum holes. The pressure during the explosion can be achieved 1000 bar, and the surface damage does not occur. The result is excellent cleaning even in labor-intensive places.
One refueling of the ultrasonic chamber is enough for 6 - 8 cleaning 8 kits injectors. Before refueling the ultrasonic heated chamber, it is necessary to dilute the liquid to 30% distilled water. Application in ultrasonic chambers without heating has a ready-made appearance.
The System of Mobil Cleaning, Installing SMC (DD-2300)
Set of adapters for servicing fuel systems of American cars for DD-2300, SMC-1001
Set for measuring pressure in the fuel system of domestic cars SMC-101
Set for measuring pressure in the fuel system of domestic cars SMC-101 |
Set for measuring pressure in the fuel system of any car imported and domestic production SMC-1002
Set SMC1002. To measure pressure in the fuel system of any car imported and domestic production |
Ultrasonic bath, 3 l. UZB-103.
Ultrasonic bath, 4 l. UZB-104.
Diesel tester for testing pumps with electronic control
KA-6719K compressometer for diesel cars (freight)
KA-6720K compressometer for diesel cars (passenger)
Device light C-110
Askan-8 diagnostic tester for VAZ and gas control units
A set of devices and tools OR-15727M
|
Expanded Information
Stand for testing and adjusting the pump of various types, including with high injection energy of domestic and imported production with a cyclic supply of up to 250 mm / cycle with a diameter-rum plunger to 12 mm (12-section, asynchronous electric motor 15 kW, Mitsubishi frequency converter ). Menzur measurement system (injection angle sensor, front nozzle arrangement). Autonomous thermal stabilization system.
The stand is intended for diagnosing and regulating the TNVD type 133,175, 185 and their modifications with a cyclic supply of up to 250 mm2, injection pressure up to 120 MPa, as well as motor TNVD engines type YAMZ-238, YAMZ-240, YAMZ-8401.10, YAMZ 850, YAMZ 7511, YMZ 845.10, YMZ 8421.10, YMZ 84 23.10, YAMZ 84 24.10, YAMZ-236 BE (not), YAMZ-236 m2, YAMZ-236A, KAMAZ-740, KAMAZ 7408, ZIL-645, ZIL-0550, GAZ-5424, GAZ-5441, KDZ-744, D-65, D-260, 64NSP 18/22, 6DM-21A, DGP 200/750, D-245.12, SMD-31, SMD-31B, SMD-62, SMD-62T, SMD-31/32, A-01M, A-01 ml, A-01 MTG, A-41E, D-440, SMD-60, SMD-72, SMD-64. TNLD TN, UTU, ND, 4UNTM, LSTN .. TNVD type PVA, PVB, PESA, PEA, PECM, PPM (F), JPH, WSK, PES, CAV, BOSCH VE, D6, D12 are adjustable with additional equipment supplied By request.
Stand DD10-05 with a menstic measurement system (the injection angle sensor, the front location of the nozzles), installed 10 kW electric drive, consisting of an asynchronous motor and the Mitsubishi Electrics frequency converter. Diagnostics TNLD up to 12 sections, built-in lubricant station, built-in supervision system, autonomous thermal stabilization system.
Diagnostics of pumps is performed by reproducing the rotational speed of the drive shaft of the high pressure fuel pump (TNLD), temperature and fuel pressure, measuring the specified parameters, as well as cycle feed, fuel consumption supplied to the object of testing, injection compensation angles (injection) fuel, turning the fuel coupling Injecting, deviations of injection start angles (injection).
On the stand you can carry out the following operations:
Tests and adjustment of high pressure row fuel pumps
(in the future TNVD) with independent and forced system Lubricants, with the number of sections up to twelve, as well as a distribution-type TNVD with the amount of powering branches up to twelve by controlling the following parameters and characteristics:
. The magnitude and uniformity of fuel supply by sections
(pump sections performance);
. The frequency of rotation of the TNVD shaft at the time started
regulator;
. The frequency of rotation of the TNVD shaft at the time of termination
fuel supply;
. Pressure opening of the injection valves;
. The angle of starting the discharge and end of the fuel
on the rotation of the TNLD shaft and the alternation of the supply of TNVD sections;
. Angle of valid beginning and end of fuel injection
(in diagnosing);
. Characteristics of the automatic injection advance coupling;
. Maintain a given temperature.
Technical characteristics of the stand DD10-05
Stationary |
|
Electric drive |
|
The number of simultaneously experienced high pressure sections TNVD, pcs., No more |
|
Playback range: |
|
Counting the number of revolutions (cycles), about. (Cycles) |
|
Cycle fuel supply, mm3 cycle |
|
Fuel Temperature, 0s |
|
Fuel pressure, MPa (kgf / cm2) |
0….3 (0….30) |
0…0,16 (0…1,6) |
|
Oil pressure, MPa (kgf / cm2) |
|
Limits of permissible deviations of measured values: |
|
Drive shaft rotation frequency, from 70 to 800 min-1, min-1 |
|
over 800 min-1,% |
|
Cyclical fuel supply,% |
|
Corners of the start of fuel injection, degrees |
|
Circuit numbers of cycles, cycle |
|
Fuel Temperature, 0s |
|
Bandwidth of the sections of the fuel tract of the stand, cm3 |
|
Measurement error limits: |
|
Drive shaft rotation frequency, min-1 |
|
CM3 / 1000 cycles |
|
Circuit numbers of cycles, cycle |
|
Fuel Temperature, 0s |
|
Fuel pressure in the range from 0.1 to 0.6 MPa (from 1 to 6kgs / cm2) |
± 0,015 (± 0.15) |
Fuel pressure in the range from 0.6 to 4.0 MPa (from 6 to 40 kgf / cm2) |
|
Oil pressure, MPa (kgf / cm2) |
± 0,015 (± 0.15) |
Air pressure, MPa (kgf / cm2) |
± 0.001 (± 0,01) |
Corners of the start of fuel injection, degrees |
|
Capacity |
|
Fuel tank, l, no more |
|
Oil tank hydraulic, l, no more |
|
Water tank, l, no more |
|
AC power supply |
|
Voltage, B. |
|
frequency Hz |
|
Power consumption, drive electric motor, kW |
|
Electric motor fuel system, kw |
|
Motor Lubrication System, kW |
|
Refrigeration unit, kW |
|
Fuel heater, kW |
|
general power, kw |
|
Number of service personnel, people |
|
Overall dimensions, mm, no more |
2600 x 970 x 1540 |
Mass dry bench, kg, no more |