Making a car on a radio control. How to assemble the machine on the control panel. How to collect a radio-controlled machine: tools

And I decided to repeat. With the beginning I ordered the equipment, servo drives, ammortizers that are less on before and big back. The photo is not very



i found the engine from chainsaws in 45 SS and 3 horsepower.
And I started making a frame. The first damn turned out to be a comment because I did it from the metallic profile and the frame turned out to be heavy and the roast that I did not fit.
Here I decided to try to do something lighter and stronger. With my hand I got a sheet of aluminum from it, then I decided to make a frame. first light and durable (in some kind of degree) one of his minus is the fact that it bends, but it's not a trouble. For what he would not be rushed, I strengthened it in the center. By installing 2 strips from an aluminum profile. I turned out to be surprisingly durable 32 kg. Gury stands as Hello, and this is necessary for me. The frame turned out to be 73 cm, the width 25cm thickness is 2.5mm. And the frame itself.

Then I thought how to make a running how to install the front wheels from the beginning I wanted to use an aluminum-shaped profile to set the suspension on it but not where it could not find it (I did not think that this is such a deficiency d). It would buy aluminum corner 25 mm I learned that Rophile could buy in the Castor, but it was too late, that's what happened

the height of the corner turned out to be 6 cm. I still think how to do it better because the model will be rear-wheel drive and such a scheme is no longer suitable and do without the main parts rear suspension I don't risk a risk because I need to make a prediction. And while I am waiting for the main parcel without which this machine is not when it does not move from the place. It includes a set of drive axes.

the receiver is like native in my stupidity burned

and wheel adapters

To the completion of the first part, I want to show something about how my model will look like I'll tell you immediately, I didn't find them on the Internet. To be continued.

With your own hands - many this phrase is associated primarily with the jigsaw for metal, a soldering iron and other Handmaider tools. Make your own model from an absolute zero - pulling out each item on your own - it is really possible, but it is quite complex, time-consuming and very demanding to our own skills process. So now we will talk about easier and available option: as collect Radio-controlled car at home.

How it works?

Modern models on radio control can be divided into two large groups:

• RTR.Fully ready for use of the machine ,. That is, it took out the model out of the box, put the battery - and forward, on the racing;
• Kit. Supplies option for advanced users: instead collected typewriter A set of spare parts, to which you add your own - custom - spare parts, collecting the model of your dream independently.

Note : A variant in which you buy all parts separately, is not much different from. You just do not use ready-made sets, but, nevertheless, you use factory parts.

Why do you need an RC model with your own hands? Exactly the same as any custom: to stand out in the crowd, make your car unique. Moreover, the assembly of finished parts is less demanding of the skill than "work with a file".

What parts will be needed?

As a rule, if you chose some kind of Kit, then only the chassis and body included in its package. Additionally need ( we consider the option with an electric machine):

• Engine;
• Radio equipment: control panel, receiver, telemetry;
• Wheels;
• Battery;
• Disks, inserts, etc.

Ultimately, it all depends on the specific set for the assembly of the radio-controlled model of the machine with their own hands: in some, for example, there is no body, and it is purchased separately.

Is it difficult to collect Kit?

It is at the stage of assembling Kit'a difficulties usually does not occur: the details are numbered, it includes a detailed instruction to them - do everything neatly, and there will be no problems. Difficulties most often arise at combining the chassis with the rest of the components, so we advise you again: before buying the engine and other spare parts carefully Explore the selected Kit and its characteristics. Excellent choice will be read thematic forums: Surely, Kit has already worked with this kit - and, most likely, this someone willingly share their experience.

Plastic or aluminum?

The answer to this question largely depends on what brand is we talking about, but about it below. If you compare "in vacuum" - and good Plastic S. good Aluminum - the picture looks like this:

• Plastic: Lighter, it is better to shove the blow, restores the form after the collisions. But, at the same time, if the plastic is too strong, plastic cracks and breaks, it will be fixed almost unrealistic - the item is under replacement. In addition, on plastic parts, the seating of shafts and bearings, which occurs, because of what the backlays occur - it is necessary to change the item again;
• Aluminum. It is possible to repair and is practically not deformed over time, but good aluminum costs more than good plastic. Bad aluminum is usually rather fragile and literally scattered at the level of load level, which will not even notice high-quality plastic. And it is about the same.

Spare parts manufacturers

You can highlight the three most interesting brands:

• RPM.The best plastic on the market. Ideal quality, high strength, exceptional durability - what you need to make your own hands with a uninstalled RC model. The deficiencies of the brand are only two: high price and obvious sharpening for American cars like, on the "Chinese" spare parts RPM, most likely not to put;
• Integy. Aluminum details, good balance between price and quality. If you still prefer metal plastic, it is quite possible to think about choosing this brand. Well, yes: Aluminum looks cool!
• Pro-Line. Another excellent one - and quite universal - brand. The optimal choice, if you are going to work not with American Kit. Among the advantages of the brand: 5 years on the market, a bunch of awards, a very wide range and acceptable pricing policy.

​​​​​​​

General conclusions for machines in managing their own hands

If you carefully follow the instructions and do not rush, in self-assembly The RC model is not sophisticated. The main thing is to use high-quality components from famous brandThey fall into their seats trouble-free. Well, we recommend starting with Kit'a simpler, and then, after having received the first experience, lay the Castoma bar.

Becoming the happy owner of a powerful and reliable toy controlled at a distance - the dream is not only many children, but also some parents. Today manufacturers are ready to offer a variety of entertainment that can surprise even the most sophisticated young consumers. Technique on radio control can be a wonderful gift, and when properly operation It is capable of listening for quite a long time.

Among the large number of models, gasoline cars on radio control deserve separate attention, since the power and reliability indicators are among the highest. About the peculiarities of these popular toys, their specifications And the views then will be discussed.

What is a gasoline machine on remote control?

First of all it is worth saying that such a product is almost complete, but only a reduced copy of the usual vehicle. These machines also go on gasoline, while the maximum speed values \u200b\u200bare really impressive: some models easily accelerate to 80 km / h. However, it will not be noted that such mechanisms periodically require repair, as well as ordinary cars, therefore, to the process of driving, it should be approached with all seriousness.

Of course, it is not recommended to use such toys in the room, since it is possible to estimate all their potential only on open areas, for example, on asphalt tracks.

The main characteristics of gasoline machines on radio control

The varieties of these models there are many: it is cars for highway races, and buggy, and samples intended solely for drift, which will be discussed a little later. This or that typewriter on radio control with a gasoline engine has its own characteristics.

So, a distinctive feature of these models is the remote. In samples on the radio control, its maximum interaction radius is usually about 150 m.

Another unique item is gas enginewhose power can be different. From what type of motor is installed in a particular model, the scope of its operation depends.

If we compare gasoline machines on radio control in size, it can be safely distinguished both children's reduced products and large toys that will be more suitable for adult lovers of such equipment.

What should the choice of gasoline radio-controlled machine depend on?

In order for the acquired technique to deliver only joy, it is necessary to pre-carefully examine the entire range of products and stay at the most suitable. Selecting the machine for the child, it is necessary to be guided first of all its age, but it is also worth thinking about how it will use the toy. If the main requirement for the product is the speed, then it is best to choose a high-speed sample, and an off-road model is ideal for overcoming obstacles.

The younger child, the easier it should be control. It is better to abandon the acquisition of highly sensitive devices so that the master of the typewriter has experienced problems. At the same time, attention should be paid to the size of the product, since some gasoline cars on radio control are quite voluminous, which can be quite uncomfortable for a small child. Large models are the perfect option for adults.

Proper operation of gasoline machine on remote control

In order for such a toy to serve as long as possible, it is required to accommodately approach its content. Do not forget that the child can cope with such technique is very problematic, so it is better if an adult is always near. Of course, all repair and preventive work (replacement of fuel, oil, lubrication of parts, etc.) should also be carried out by parents not only because of the risk of equipment breakdown, but also because the fuel harmful couples are dangerous for the children's body.

Many gasoline cars on radio control are sold unchanged, so in the process of assembling such products it is extremely important to be guided by the attached instructions. In addition, security rules exclude any games near the sources of fire and open reservoirs.

Characteristics and advantages of radio controlled drift machines

As mentioned earlier, the technique on the fuel operating from the remote control may differ depending on its purpose. So, consumers are widely popular with gasoline machines for drift on radio control. These models like both adults and children, and their difference from ordinary high-speed toys is the following technical characteristics:

• such gasoline cars are equipped with special shock absorbers with drift springs;
• the tires of these products do not have a tread pattern and are more rigid compared to conventional models;
• as a rule, the basis of the body of such a toy is shockproof plastic, as well as a durable bumper, protecting equipment from shocks;
• the special design of the suspension allows you to perform various technical elements.

How not to make a mistake with the choice of gasoline machine for drift?

Toy cars on radio control, designed for such purposes, do not buy at all little childSince the minimum age of the owner must be 3 years.

In addition, it should be remembered that there are no fully universal models. This means that by purchasing a toy typewriter for drift, you should not wait for any other properties from it like high speeds or high patency.

Another important moment - This is the type of embedded engine. Used for the drift of the gasoline machine on radio control (photos of various samples can always be found in specialized prints) must have quite powerful motorSo that the load rendered to the model did not harm her. Equipment of a new product, as a rule, implies the readiness of the toy to go without the need to purchase additional details.

The main details of the gasoline machine on remote control

Not always the parents have the opportunity to buy your child an expensive toy in the store. But if we talk about gasoline cars, then such products can be made and independently. The device of these toys largely resembles the structure of a standard car, so for many drivers the installation process will be understood.

To deal with how to make a gasoline machine on a radio control, initially need to decide which details for this work will be needed. So, the set of standard toys includes the following structural parts:

• shockproof body;
• gasoline engine of the desired power;
• strong wheels;
• chassis;
• a set of tools in the form of different screwdrivers.

Features assembly

Gasoline cars on radio control do it yourself easy to make. After the acquisition of the necessary materials should be done on installation.

Attaching the front wheels to the frame, you need to make sure that they are easily rotated. Tires are best choosing rubber, since it is this material that has the highest possible adhesion with the roadpapers.

The body for the machine can be simply purchased in the store, but many owners want to create a unique toy and come up with their own sketch of the case, which is subsequently manufactured using a specialist.

Selecting the control radio roll, should not save on it, since the quality of this part does not directly affect the convenience of controlling the vehicle.

Of course, one of the most important components of the machine is its engine. Gasoline samples require careful care, but their capacity indicators are the highest.

Thus, it is safe to say that it is possible to collect the machine on the radio control, which is functioning with the help of fuel, it is quite possible, the main thing is to have a desire for this and the entire list of details.

Hello everyone. Introduction to the general search for a self-made radio control panel to control various objects at a distance. It can be a machine, tank, boat, etc. Made for "children's" radio mug. Using the radio module NRF24L01 and the ATMEGA16 microcontroller.

For a long time I was lying the box of the same broken gaming joysticks from the consoles. Delivered from a gaming institution. I have not seen a special application in faulty game joysticks, and throw out or disassemble a pity. So stood the box with a dead cargo dust. The idea of \u200b\u200busing game joysticks came, as soon as I talked with my friend. A friend led a circle for young radio amateurs in the boarding school, and for free on weekends, introduced inquisitive kids to the world of radio electronics. Children, after all, as a sponge, absorb the information. Since I myself am very welcome similar circles for children, and here also in such a place. That offered the idea how to use the non-working joysticks. The idea was as follows: Create homemade Radio remote remote control models collected by their own hands, which would like to offer children to explore the project. He really liked the idea, considering that the financing of children's institutions is not very good to say, and I was interested in this project. Let me, too, will contribute to the development of the radio mug.
The goal of the project to create a complete device not only as a radio remote control, but also the response part to the radio-controlled object. Considering that the console for children is the connection of the reception part on the model, it should also be simple.

Assembly and components:

After breaking the game joystick to the components, it immediately became clear, you need to make a new printed circuit board, and, very unusual forms. At first, I wanted to breed a printed circuit board on the ATMEGA48 microcontroller, but as it turned out the ports of the microcontroller simply lacking under all the buttons. Of course, such a number of buttons in principle is not necessary and it was possible to restrict ourselves to only four ports of the ADC microcontroller for two joysticks and two ports for the clock buttons placed on the joysticks. But I wanted to use the maximum possible number of buttons as possible, who knows what the kids still want to add. So the printed circuit board was born under the ATMEGA16 microcontroller. My microcontrollers themselves were in stock, remained from some kind of project.

The gums on the buttons were very worn, and the recovery was not subject to. But it is not surprisingly considering where the joysticks were used. For this reason, the clock buttons applied. Perhaps the minuses of the clock buttons include strong clicks that arose as a result of clicking on the button. But for this project, it is very tolerable.
The board with the joysticks did not have to redo, left what is it, which saved time significantly. The end buttons also saved in its original form.
As a transceiver chose a NRF24L01 radio module, as the price is very small in China at a price of 0.60 $ per piece. bought. Despite its low cost, the radio module has not low opportunities and of course I approached. The next problem faced with, and actually where the radio module is placed. The space in the free housing is not enough, for this reason the radio module posted in one of the joystick housing handles. I didn't even fix it, the module was tightly pressed when it was going to completely housing.

Perhaps the biggest problem was the issue with food for the radio console. Buying some specialized batteries, let's say lithium, flew into a considerable penny, as seven sets were solved. Yes, and remaining free space The case did not very much allow to use standard AA series batteries. Although consumption and not significant can be used by different suitable power supplies. As always, friendship came to the rescue, the colleague at work was adjusted batteries lithium flat from mobile phones and charging bonus to them. Yet a little had to remake them, but it is insignificant and much better than to do with zero charging for batteries. Here on the flat lithium batteries I stopped.

In the process of testing the radio, the module, its claimed range justified and confidently worked in direct visibility at a distance of 50 meters, through the walls the range decreased significantly. It was also plans to establish a vibromotor that reacted, let's say on some collisions or other actions in the radio-controlled model. In this regard, provided for pCB Transistor key to control. But I left additional complications for later you first need to rip the program, as it is still damp. And the design, given that this prototype requires minor improvements. So as they say, "with the world on a thread,", with minimal investments, the remote control was created.

In his youth, like any boyfriend, very interested cars on radio control. I remember how a neighbor guy had such a machine, as the street was built out the queue of the same guys who wanted to at least try to trigger a little. Clear thing that few people could allow such a luxury, but almost every of us visited a circle of a young technique, where they were taught to design and create some model techniques. And remember how to publish the publication "Young technician" and "Youth technician", I still have a pack of magazines, which once reread along and in across ... When I discover one of the magazines in the moments - Nostalgia wave covers, it is simply impossible to keep emotions ...

My teacher in labor knew how many things and gave a lot to us for which he had a huge human thank you. I still remember our lessons - it would seem that we were given the most elementary knowledge, but how much they mean then! This modern youth does not appreciate what they are given at school and at the university - gaining knowledge has become something fresh and not at all valuable.

In the light of the innovative ideas of our teacher, some of us still tried to perform something like a self-propelled apparatus. It was not bad, though a few came to the victorious end. I, and without incarnating the idea of \u200b\u200blife, I decided to make a typewriter with my son on the control panel. True, again, we did not reach the victorious ...

The goal we had:
1. Make the radio-controlled model itself.
2. Use the primary means.

This is what stopped:

Here also planned the steering wheel, as you can see, management with independent suspensionFully homemade aggregate (used wood, cardboard, wire, screw, rubber, glue). The son went, and we did not do the machine. Recently, again, I took it from the deep box with Nostalgia and thought that it would be worth doing after all what was started. True, I didn't completely all the mechanism for me, and it makes no sense to steam - the modern opportunities decided for us - you can buy ready-made spare parts. So it remains for a small - motor, radio control and ready! Soon it will be similar to this model))))))))))))

The photo took it from here: hobbyostrov.ru/automodels/, from where, in fact, I plan to buy radio-controlled details for introducing into your car. Just now they will be vague doubts ... Is it worth it to take the assembly made by his hands or buy ready-made - not a radio-controlled car and make a radio-controlled. Or, easier simple, go to the above site and buy finished car With radio control - is it worth bothering? Because with the guide elastic elements, I have an order, and in with depreciation, durability, every success can be real problems.

Therefore, while I bow to the second version - as the basis, you can buy a constructor as a basis and build a model to taste into which to implement radio control. Still, the model from the cardboard is not so durable, and where can it be lubricated in it?)))))) Moreover, you can buy all the necessary spare parts on the same hobbyostrov.ru/.

In general, I will do - show what happened. In the meantime, I would like to hear / see the experience of creating radio-controlled models, I am sure that I'm not alone bothering so. Maybe there will be specific advice? ..