How to install fog lights on VAZ 2110. Connecting PTF in a car with Europanyl

The constantly introduced AvtoVAZ changes to their conveyor models lead to the fact that with a detailed acquaintance of the same car documentation have significant differences. For example, not all factory VAZ 2110 have fog lights (PTF).

And the owners have questions about what needs to be done to connect them with their own hands? This article will talk about whether to "survive" connecting the fog headlights of VAZ 2110 without disassembling the front of the car and the instrument panel.

Before you go to the auto shop, you should find out what exactly needs to be purchased with the features of your car.

And for this we visually define:

1. What type of torpedo is installed in the cabin;
2. Li B. front bumper Planting sites (climbing) for the installation of PTF.

Note!
Finished tumab sets have a lot of differences by the method of fastening.
In particular, the inclusion button of the fog headlights VAZ 2110 for cars with the old torpedo has another shape than from Euro-torpedo.

Legislation requirements

In auto parts stores, your attention will be a huge selection of fog little ones and sizes.

But everything rests in the existing GOST 8769-75, according to the requirements of which:

1. Fog lights allowed to install only in pairs;
2. From the plane of the side dimension, each headlight must defend at least 400 mm (measured on the outer edge of the diffuser);
3. The distance from the road to the lower edge of the scatteer should not be less than 250 mm;
4. PTF should not be installed above headlight.

Note!
It is allowed to install PTF on the roof of only those cars that are used on the rally tracks or in compets of the Off-Road type.

Ready PTF sets

To date, we can find 2 types of fog languages, in which the light spot is formed:

1. Due to rice on the glass (classical headlight with reflector);
2. Due to the lenses (so-called linase).

Tip: Production of stickers on the headlights will protect lenses from damage.

Which of them choose - depends not only on your desire, but also from the set set.

In particular for pTF installations required:

• Full matching of the set of your car model (in this case, VAZ 2110);
• The adjustability system is convenient in circulation (meaning - without removing the bumper or partial disassembly of the headlight itself);
• Visual instructions on how to connect fog lights on VAZ 2110.

Note!
Only specifically designed for VAZ 2110 dozen can be installed on a car without any bodywork.
The manufacturers whose products are as simple as possible in the installation include the German Bosch and the domestic "automotive plant", the price of products of which is significantly cheaper.

So, we found out that the cars of the family 2110 may differ in the method of installing PTF due to technical features Panels of instruments and front bumpers.

Everything else (installation of headlights and their integration in the power supply) will not create problems, since:

1. The automaker prepared as much as possible vehicle To install PTF;
2. Independent work will take only 1.5-2 hours of pure time.

Self installation

Connecting to the electrical stroke

By purchasing a Ready PTF set, you can proceed to its integration into a regular:

1. We turn off the battery (removing "+");
2. Open the fuse block and unscrew 1 screwdriver using a screwdriver and remove the unit into the cabin;

1. We deploy the block and find the conclusions of the two fuses F4 and F14. The first is responsible for protection right headlight, second left;
2. The block also has a fuse F20, which is responsible for the work of the rear PTF;

Note!
The diagram of connecting the rear fog headlights VAZ 2110 is initially present on all models, and is a two-dimensional lamp in the block headlamp of overall lights.

1. We insert the copper connectors of the wires from the kit according to the attached scheme;
2. Separately display the wire for the button in the instrument panel and install it;
3. We deploy the wires through the partition into the workpiece;
4. Collect the fuse block back.

Installation in bumper

1. Remove the plastic plug and drag the wiring with the connector into the hole;
2. We connect it to the base and in the bumper;
3. We take a cruciform screwdriver and brought the headlight with 2 self-stakes;
4. Pre-regulate its position;
5. Introduce the wiring in the pumproom space, leaving the slack for replacement (for example, a blur lamp);
6. Connect rechargeable battery And check the quality of the work done.

It remains only to adjust the correct direction of the luminous flux. Information about this procedure can be found in other articles of our site dedicated to AvtoVAZ models.

Conclusion

It remains only to wish you a trouble-free driving in conditions of poor visibility. And in the video presented in this article you will find additional information on this topic.

Any driver at least once in his life had to manage a car in bad weather conditions. Bad weather has a significant impact on safety road. The danger of driving a car in bad weather conditions is that the driver because of a bad view may not notice suddenly appeared on the human road. Because of this, he will not be able to react and slow down on time, as a result, the driver will be in the unenviable position.

And this is due to the fact that some drivers save on installing additional lighting. And saving on lighting in the car you are dangering not only yourself, but also sitting passengers in your car! Therefore, it is so important in addition to the headlights by car VAZ 2110-12 additionally install fog lights on the VAZ 2110, 2111, 2112 - which increase the viewing angle and help the driver in time to see the danger. Many experienced drivers say that fog labels should be with yellow glasses, as the light from fog lights with yellow glasses further spreads in the fog than with ordinary white. But the main role in the fog lights is their proper installation. After all, foglights illuminate not only the road, but also the side of the road, and this is very important when driving in the fog to see the side line of markup.

Also due to the fact that they are installed at the bottom of the bumper, they seem to be high under the fog, because the fog basically does not reach the Earth. But even if the fog on the VAZ 2110, 2111, 2112 is correctly installed and adjusted, they will not clarify the road further 10-15 meters. But this distance is enough when driving in bad conditions, as the vehicle speed is usually small. Also PTF is recommended to use with the main headlights. With the right use of light instruments, you will feel on the road confidently. Now let's go to the selection of fog and the installation on the car VAZ 2110-12 immediately say that there is nothing complicated in the installation.

A variety of fog lamps for cars VAZ 2110-12:

• Lenzovy fog lights. The light from these fog lamps is more directed, it seems brighter compared to LED fighters.
• LED fog lights. Very economical fog lights, high service life, huge selection of light radiation.
• Halogenne tank headlights. Enjoy popular, due to its low cost.

Installation of fog lamps on the car VAZ 2110-12:

• remove the plastic plug on the bumper;
• connect the connector running from the button to the fog light;
• secure fog Far on two self-pressing;
• install the foting of the fog light.

Succession is not difficult, even a novice driver will cope with it. But with fog lights you will feel confident even in the strongest fog. And you will not expose the danger of yourself and passengers in the car!

And the huge selection of foglights in the online store site will not leave indifferent even the most demanding buyer.

Not all cars of the VAZ-2110 brand from the plant are equipped with fog lights. Fix it is quite simple, although in contrast, such as VAZ-2115, there are no wires for connection even in the cabin. This article discusses how to connect VAZ 2110 fog in the factory scheme, although some change is proposed.

What will you need to connect the fog of VAZ 2110?

The most important thing is the headlights themselves and the place of their installation. Standard headlight capacity is usually 55W, it makes sense to put more powerful. The header of the heads also matter. Cheap headlamps usually do not serve for a long time.

The installation site is also important if you plan to use not regular places. All installation restrictions are described in road rules.

Also when connecting the fog of VAZ 2110, wires will be required. In auto stores, there are sets of which include wires with chips, relays and a button. If there are no such sets, then everything can be assembled independently.

The button is better to put the standard. The relay is universal with four conclusions. The presence of chips is not necessary. They are needed for the convenience of assembly and maintenance. To connect it will also be necessary to clip on the ends of the wires connecting contacts of the Mama dad type. They are also sold in auto shops. I do not advise buy such contacts with wires, it is better to enable them on the wires directly when assembling, passage.

As for the wires, they can be purchased at any electrical store. It is best to use a Wire type SCVVP-2. It has two veins of a multicore copper wire in double isolation and soft enough. The section is enough 0.5 mm, but if you plan to install lamps of greater power, then it is better than 0.75mm. I do not advise you to buy wires in auto shops, they are more expensive, and insulation is always single.

Fog VAZ 2110, connection.

The laying of the wires is better to start from the windscreen space, that is, with the feed wires directly to the fog lights. They are laid on the left wing, from under the instrument panels, as the main wiring is laid.

Length wires must connect the plug sh1 conclusions 6 and 1 mounting block with fog lights. Next, you need to connect the power to the fog headlight on the power button. If you look at the factory connection scheme, we will see that the power is taken from the F1 fuse, the dimensions of the right side. If you use the finished set when connected, the connection is made in the same way. In this case, the fog will be lit only with the enabarits included.

Options for connecting the power button.

For self-assembly Schemes Power can be taken from the lighting button. It is much closer and more convenient to do. Also, there is the likelihood of various connections. What output to use in this case depends on you.

You can connect to the output that is suitable on the outdoor lighting button from the ignition lock. In this case, fog lights will work only when the ignition is turned on.

Also, the button of the fog of VAZ 2110 can be connected to the output of the fuses of the dimensions. In this case, the headlights will burn with the enabarits included.

Another option to connect to the output of the size of the dimensions has a permanent plus. Such a connection will allow the headlights without inclusion of ignition and overall lights. In both of the latter cases, it is likely to leave the burning fogs when disabled Engine And plant a battery.

After connecting the button, it is necessary to connect it with an 85 relay output, and the output 86 relay with a mass. The conclusions of the relay 87 and 30 with the conclusions 5 and 3 of the plug of the C1 of the mounting unit, according to the scheme.

Checking the connection scheme, troubleshooting.

If the connection was performed correctly, the fog of VAZ 2110 when turned on should be tanned. If this did not happen, then it is necessary to find a cause by checking the circuit of the connection.

For quick search, split the chain on the plots. To do this, you determine the relay click, its electromagnetic coil is turned on or not. It is necessary to take into account the method of connecting the button, that is, turn on the dimensions or ignition.

If the relay does not work, then check the control lamp. Check out the availability of power and minus on its coil. To do this, connect the reference lamp between the appropriate outputs. If the lamp is burning, then change the relay. Otherwise, connect one end of the control lamp to the wire from the button, and the other to the mass of the car. If the lamp burns, make a good connection with a mass of second output. If the relay is triggered, but the fog does not burn, check the presence of power on the wires connected to the pharmaces. If the power is there, then make a good connection to the mass or change the lamp. If no power, check the integrity of the fuses and the power supply.

Installed, figured out how to connect the fog of VAZ 2110, but it's not all. Whatever to make counter-drivers and not be a culprit of the accident, the headlights should be adjusted. How to do it yourself, is described in the article.

"If you notice a mistake in the text, please highlight this place with the mouse and press Ctrl + Enter» "If the article was useful to you, share a link to it in social networks"

Installation of fog lights - it's not just a step to improve external view VAZ 2110, but also concern for their own convenience and security. That is why it is necessary to know how the fog in the VAZ 2110 is connected and ensure the best conditions for riding in bad weather.

Why do you need it?

Modern fog lights give a significantly more "penetrating" light through the fog and the rain veil and better illuminate the road canvas. First, PTF gives a flatter luminous flossing over the ground, and spreads more into the width than height.

This is done not in vain. The fact is that due to inconsistencies in the air temperature and land (land warmer), the fog rarely comes to the road itself, and therefore, with such headlights on the VAZ 2110 you will see the road at which they eat, at least ten meters ahead Middle light headlights.

Secondly, due to the width of the fog beam, you will see the sidebuine and markup. It will not allow you to "fly" from the road that in the fog is not uncommon.

Thirdly, you will not blind oncoming cars, and you yourself will be visible to other participants of the movement, if, of course, the adjustment will be performed correctly. So - the likelihood is increasing that another car does not fit into your vase 2110.

Color value

Someone in the old manner believes that it is better when the glasses of fog languages \u200b\u200bhave yellow. But this does not respond true. Most leading manufacturers today produce transparent white fog, and they are not only not inferior to yellow, but they often exceed them.

On VAZ 2110 you can put corrugated or transparent glass. For some reason, more fashionable, albeit less useful, because shine spots, and the corrugated give a more directed beam, which actually increases visibility in bad weather.

Buying necessary

It is possible, in principle, buy a ready-made set with wires, but many believe that in the case of purchase, the number of installation options is increasing separately, and it will cost everything cheaper. So, we purchase:

• A set of headlights (2 pieces);
• Plastic pads;
• Frames of headlights;
• Key and yellow indicator to it;
• Relay;
• Wires. Better bought in the store electrical equipment so that there are two copper veins with double insulation (SWVVP-2 is suitable). It will be normal and the section is 0.5 mm, but if desired, put the lamps of greater power, take 0.75 mm.;
• Terminem for installation on "Mass";
• Wide, as well as narrow terminals, called Mom / Dad. When they acquire them, it is desirable not to take them complete with wires. The installation will be more convenient if these terminals are crimped with passatages already on connections of installed wires.

Note: If you have a torpedo torpedo of an old sample, then it is better to buy a set of PTF 2110, and for a new, so-called euro it is more convenient to connect PTF 2115.

You can, of course, vary, but it comes exactly about the convenience of the location of the buttons. Relative to the power of the lamps, then 55 W is enough, no longer needed. Also note that very cheap fog will not last long.

Installation

PTF connection should be started from the location of their installation. If this is differently provided by the manufacturer, then you need to put them under the bumper.

The installation of fog lights is possible exactly according to the scheme attached to them, but you can make some changes, not forgetting that you need more and accurate adjustment to optimal work.

It is more convenient to work according to such a scheme:

1. Wiring to PTF. It is performed on the left under the hood along the wing, about the same way as the installation of the main wiring;
2. Connecting power to the button on the instrument panel. According to the factory scheme, the power supply is made from the fuse on the dimensions on the right. But you can take it from the buttons to turn on the lighting or from the output from the ignition lock to the inclusion of the main headlights. In this case, fog lights will burn only when the ignition is included. It is possible, although it is not very desirable, take food from the output to the dimensions. But then you can, for example, forget to turn off the fog and plant the battery;
3. Plug connection with headlights.

Actually, with properly connected, the light on the fogs should already be. But if you include them, and they do not light up, it means that the installation has made a failure somewhere, and it is necessary to check for the "segments" of the chain. It will help a relay click: if it is, it means that the electromagnetic coil includes it. But it may be that you need to replace the relay itself.

And the final barcode is adjusting the light of fog. If they illuminate the road and the road, look a little down, so as not to blind the oncoming drivers, it means that everything is right, and you can go on the road, even if the fog sits.

Riding without fog in the rain, fog and snow turns into real torment. Therefore, so many owners of dozens, deprived of PTF from the factory, are thinking about the installation. What fog lights are best suited for VAZ-2110 how to make right choice And do not overpay the superfluous - we'll figure it out in all right now.

What do we want from foglights?

Initially, a few words about what we need from fog headlights and why the other light and installed elsewhere on the car will only harm both the driver and to interfere with the counter. Even with the brightest lamps installed in the headlight headlights, and with the best optics, their task does not change - to highlight the maximum space of space ahead and capture as much as possible.

In general, this applies to both the near and far Light, It's all in the settings. In conditions of limited visibility associated with high humidity (fog, snow or rain), sense from headlight headlight .

Most often, they only interfere, especially the lamps of the distant light - reflecting from moisture particles, the powerful light creates in the literal sense the impenetrable eye of the wall.

Such a light can give a cheap PTF: it will be terrible, but about the glow under the fog, even speech can not be.

Features PTF.

The best way out in such cases is to turn off the far and slowly go to the near. This if not installed fog.

Their peculiarity is that they are installed much lower headlight headlamps and that is why it is easily firmware to the fog. And all because even the most thick fog almost never concerns the level of land.

Properly customized PTF will never create a veil of light And their light flux will be shaved along asphalt, and not to make the driver's most. This is caused constructive features Fog lights that we have to deal with.

What are the fog little on VAZ-2110

Externally, you can not notice a special difference between high-quality headlights and "analogues" of unknown origin.

It is very difficult to make the right choice in this case, because there has been a huge amount of headlights, different in shape, by the light source and the color spectrum.

The design of the case, as well as the material of its manufacture, has a considerable importance.

It is also important from what material the diffuser is glass or polycarbonate. Since PTF is installed low, peeled plastic housings do not live long. And if we take into account that in the rain we have to often wipe the diffuserThe low-quality material will be shown and all the work of the lamp will go to Nammark.

Station and close to them PTF

In the Bumper VAZ-2110 to a regular place without additional modifications Suitable rectangular fog with regular fastening. They produce mass producers, but, again, all these headlights are different both in terms of optics and light source.

Other manufacturers and types of lamps

Of course, many try to install other types of light sources and other types of lamps. All the headlights are higher - with a halogen type lamp. That is, it is actually the same incandescent lamp, but its thread works in a gas environment (bromine or iodine halogen).

There are alternative fog.

Xenon PTF.

Sophisticated installation and expensive lighting devices.

Statery PTF, converted to xenon fog.

Old xenon PTF worked on the D1 and D2 lamps, newly received lamps D3 and D4 without the use of mercury vapor. Theoretically, the efficiency of such fog languages \u200b\u200band the power of light is higher than that of the halogen. However, do not forget about the specifics of PTF - do not cause reflections of the beam from the water suspension. And all inexpensive xenon headlights require a very accurate tuning of the light beam and are not able to give a low horizontal strip to combat fog.

In addition, the maximum color temperature for the effectiveness of the fog - 3000-4500 K. Otherwise, the sense of them will not be a susceptible light for the oncoming drivers is provided. Prices of such fog drawers are not lower than 5-7 thousand ( Hella Micro De. , for example). All that is cheaper is useless and even dangerous.

LED PTF

Intelligent LED PTF is very expensive, and buy cheap meaningless.

The main minus of effective LED fog-fog - a huge price and low efficiency.

Low efficiency is explained by the fact that the usual LED gives a bright and pleasant light for the human eye with a temperature of about 6000 K.. For head optics, it is not bad, but not for PTF. However, there are exceptions. For example, headlights OSRAM LEDRIVING FOG 101 . High-tech device with LEDs proprietary branded development with a color temperature of about 3000 k, which is just suitable for PTF.

Price - not less than 16,000 rubles.

conclusions

Now everyone can choose the right fog for its own tens, of course, consulting with a wallet and common sense. Smooth and well lit all roads!

Video with PTF overview from three manufacturers