Chevrolet laser brake light. Laser brake light on a car - auto electrician. Installation options for laser "fog"

Laser headlights are a new word in automotive technology. They are distinguished by their brightness and economy. In addition, most laser lights are easy to install, which is why they have earned particular popularity among motorists. A car laser brake light is a device designed to improve road safety. In conditions of limited visibility, when there is fog, smoke or twilight outside, the movement is considered dangerous.

With a stop light, you will protect yourself and the rest of the road users. The laser projects a red warning line onto the road. Its properties allow the line to be bright even in dense fog. This line creates a psychological barrier that forces the next driver to keep a safe distance.

You can easily let know from behind next car about a safe distance. This will allow and prevent an accident.

In the dark, a laser headlight will help determine the direction of movement of the car, as well as warn drivers about a sudden stop of the car. The headlamp can be easily installed on the vehicle using the supplied decal and bolts.

The headlamp is installed centrally on the rear of the vehicle. The adjustment is carried out within 90 degrees. By adjusting the angle of inclination of the headlight, you can control the distance of the warning lane, which is projected onto the road surface to your car.

Advantages

• Draws the attention of road users to the vehicle in conditions of limited visibility;
• Effectively prevents road accidents;
• Energy efficient design helps save fuel;
• The soft silicone wires are durable and waterproof.

Specifications

• Laser power: 200 mw;
• Laser beam length: 650 nm;
• Laser color: red;
• Lamp type: LED;
• Voltage: 12-24 V.

Equipment

• Laser fog brake light x 1pc;
• Sticker x 1pc;
• Bolts x 2

Standard "dimensions" and "brake lights", signaling that another is moving ahead motor vehicle, do not cope with their task in poor visibility conditions. The fact is that the light of the lanterns is not able to "break through" through snow, rain or fog. And even if you see a faint red light, it is very difficult to determine the exact distance to the car in front. Of course, you can purchase more powerful "stops", but they will cost many times more, and the effect will be approximately the same.

Today, modern means successfully cope with such a problem - laser stop signals, the advantages and disadvantages, as well as the principle of operation of which we will consider in more detail.

How the device works

The laser fog brake light is a miniature (18 x 25 mm) waterproof and shockproof cylinder made of anti-corrosion aluminum alloy, inside which is a laser. On the front part of the “stop” there is a round lens that refracts the laser light. As a result, the device projects a triangle with a bright laser stop line on the road (behind the car).

Seeing such a limiter, the driver behind you will instinctively slow down, which in turn will help to avoid unpleasant situations on the road. In addition, it will keep particularly impatient participants at a distance. road traffic who do not keep their distance.

Also, some people install a laser brake light with a logo, which projects a car brand (as in the photo) or any other inscription on the roadway.

The miniature "stop" is equipped with a metal holder measuring 40 x 22 mm, thanks to which you can easily adjust the angle of inclination of the device, as well as place it in the most inconspicuous place. You can fix the brake light with screws or double-sided tape. The device is connected either to the standard "stop" or to the rear dimensions.

The cost of the universal laser fog brake light on the website dealer company Laser Stop today is 1,990 rubles, you can also find more expensive models that will cost about 4,500 rubles.

However, it is worth considering in more detail the advantages and disadvantages of such a device.

Pros and cons of using a laser brake light

If we talk about the advantages of such a device, then it is worth highlighting the following advantages:

• Thanks to the laser brake light installed on the car, you will increase the visibility of your car vehicle.
• The light device can be used instead of the parking sensor, guided by the laser pointer.
• Possibility to adjust the distance of the laser beam.
• The working voltage of the laser is only 12-19 volts.
• Wide temperature Range(from -30 to +65 degrees).
• Good visibility during fog or heavy rain, when there is no way to stop on the road.
• Low price.

However, such a laser has quite significant disadvantages:

• In sunny weather, the beam will not be visible.
• A driver driving a car behind you may become confused when they see a line like this. In our country, laser stop signals have not yet become widespread, so you can simply scare another road user (especially if he has recently been driving).
• If the device, for any reason, changes the angle of projection of the beam, it can hit windshield driving behind a car.
• According to the regulations "On the safety of wheeled vehicles" p. 3.2. - it is prohibited to change the operating mode or the color of the lights. In addition, the car owner has no right to install additional or dismantle standard external lighting devices... This explains why laser brake lights are usually placed in an “invisible” location. If a traffic police officer pays attention to such a modification, he may well fine you.

Based on this, it is possible to install a laser for a car, but you just need to be very careful when using it.

How to install laser brake light

The process of self-installation of the laser stop light does not require special skills. All you need is, first of all, to determine where it is better to mount it. Typically, devices of this type are fixed:

• under the spoiler;
• under license plates;
• next to the headlight;

Let's consider the installation of the device using the example of the Laser Stop product (everything you need is included in the kit):

• Place the laser on the holder, which must then be fixed to the machine with an adhesive plate or screws.
• Adjust the device so that the beam is directed to the road at an angle of 45 degrees (so as not to blind other drivers).

The universal car laser brake light is "powered" from the car power supply. Therefore, there are three connection options: to dimensions, brake light or fog lamp.

Since the indicator should light up only when you press the brake, then it should be connected to the "stop".

Important! Do not under any circumstances connect the device to the dimensions, otherwise the laser stripe will be on constantly.

To connect the instrument locate the Laser Stop positive lead and connect it to the wiring. Then find the negative cable and connect it to the ground of the machine. The additionally installed laser can be treated with a sealant.

Trust how the device works. To do this, start the engine and apply the brake. If you see a clear red line behind the car, at a distance of up to 25 meters, then the installation was successful.

You can also try to make a similar laser yourself.

How to make a laser brake light with your own hands

To make such an uncomplicated device with your own hands, you need to be smart, since the power of the laser, "removed", for example, from a DVD drive, is about 250 mW. This is enough to light a match, so you have to break your head.

You can also use a flashlight and remove the laser with optics from it. Next, you need to decide how to transform a point of light into a strip. This can be done by aiming the laser at a cold-welded glass rod. However, in this case, the beam will most likely still be rather diffuse, so in order to achieve the Laser Stop effect, you will have to limit the length of the projected beam. To solve this problem, you need to cut a stencil from cardboard or thin plastic (in the shape of a beam).

In this case, the "exposure" will decrease, but the effect will still be far from ideal, you will have to carry out a lot of experiments. Therefore, it is worth making such a device with your own hands only if you have a lot of free time.

In custody

Laser brake lights are a relatively new trend that hardly ever occurs on the roads today. If you want to stand out from the crowd and improve the visibility of your car in rain or fog, then you can purchase the Laser Stop or any other device of this type. However, it should be borne in mind that such a "toy", if it is not correct installation, can cause discomfort to both other road users and you if a traffic police officer meets on the way.

We present to the attention of motorists a laser fog brake light (headlight) - a device that increases the safety of driving a car in conditions of insufficient visibility, whether it is snowfall, fog, torrential rain. Easy to install on any car model.

The universal laser brake light is a unique opportunity to reduce the risk of accidents on the road. A small device that forms a bright, luminous boundary line behind the car will do its job perfectly in any weather. We recommend that you become the owner of a laser gadget for your car and reduce the likelihood of an accident.

Application of laser brake light

A laser brake light, mounted on the rear of the car, draws a striking line of bright red light on the asphalt with a beam on the asphalt. The “fiery” line draws attention to you, highlights you in the traffic, forces the drivers of the cars behind them to keep a safe distance, to slow down. This psychological factor makes the use of the device not only effective, but also effective for its owner.

A laser brake light can also help a novice driver to park or enter the garage correctly. reverse.

Fog projector appearance

The delivery set includes a laser emitter (1 pc.), A power supply unit (1 pc.), Mounting bolts and 3M adhesive tape.

1. Helps to increase road safety;
2. Increased beam brightness;
3. Adjustment of the signal range and the angle of the emitter position;
4. Shockproof;
5. Waterproof;
6. Heat resistance;
7. Anti-corrosion coating;
8. Easy to install;
9. Low cost;
10. Low power consumption.

Specifications of Laser Fog Light Brake Light

• Body material - aluminum alloy;
• Weight - 70 grams;
• Complete set - 1 laser emitter, control unit, fasteners;
• Laser class - III B;
• Laser wavelength - 650 (red) nm;
• Working voltage - 12-19 Volts;
• Operating temperature range - -30 + 60 ° С;
• Emitter power - 200 mW;
• Waterproof standard - IPX4;
• Emitter position adjustment angle - up and down ± 90 °;
• Installation standard - above the license plate;
• Mounting type - 3M adhesive tape, bolts;
• The warranty is 12 months.

Installation options for laser "fog"

Installation of laser fog brake light does not require any special skills. Its installation can be done independently or in a car service. Depending on the driver's imagination and desire, the brake light can be installed inside the car so that it shines through rear glass.

Most Popular Laser Brake Light Mounting Locations

1. Under the plate with the number;
2. Under the bumper;
3. Under the spoiler;
4. Under the taillight;
5. The underside of the car.

You can power the device from the dimensions, then it will function constantly. When powered by the brake light, the laser beam will be turned on by pressing the brake pedal.

Price and video review of laser brake light

The cost of the projector is 4230 rubles. However, you can take advantage of the promotional offer and purchase a "fog lamp" at a special price - 1990 rubles.

A video overview of the fog brake light is presented below:

The laser brake light is designed to reduce road hazards, especially in poor visibility conditions such as fog, precipitation, cloudy weather and nighttime.

It is a small device mounted in the rear of the vehicle and emitting a beam of laser beams aimed at the road behind the vehicle. Activation is performed by pressing the brake pedal at the same time as the factory brake lights (recommended setting).

In the evening or at night, the beam is seen on the road surface in the form of a horizontal warning red line, which must be crossed

cars following behind is not recommended, as it marks a safe distance when driving and stopping in traffic. In fog, snow, rain with increased dust or smoke, the light is reflected from solid particles in the air, and thus the laser beams appear in the form of a triangle with a vertex at the installation site of the device.

Video: Brake Light Laser Fog

This device psychologically affects the participants in the movement, forcing at the subconscious level to keep from the line at a sufficient distance. Feedback from the owners of the laser brake light speaks of a more comfortable ride even on busy tracks. The distance from the vehicle to the warning line differs from model to model and depends on the laser power and the angle and height of the brake light.
The light effect from the device can also be used when reversing parking in a poorly lit place. Such a laser flashlight can be mounted on any brand of car, on a motorcycle, and, if desired, even on a bicycle.

Tuning version of laser brake light

Laser brake light with a logo is a type of car light tuning. Can be used as additional brake lights. Structurally differs from the base model in the shape of the hole for the passage of rays and the range of the ray. Audi, Toyota, Ford, Kia Motors, Nissan, Hyundai, Toyota, Mercedes, Mitsubishi, BMW and others logo corresponding to the car brand appear on the road directly behind rear bumper auto.
Such a light show will certainly draw attention to the tuned car and can cause both positive emotions in traffic participants and a desire to compete, overtake, which ultimately can aggravate the situation on the road.

Installing the laser signaling device

The device comes complete with fasteners - double-sided tape and steel bolts. Each car owner is able to perform installation with adhesive tape with his own hand. It is better to entrust the implementation of the bolted connection to specialists.
If the installation is done independently, the algorithm of actions can be studied according to the attached instructions:

1. Remove all protective films.
2. The device has two wires: red (+) and black (-). If you connect power to the rear brake lights, the warning bar or logo will turn on at the same time as the stop lights when the vehicle is braking. If you turn on the power from the side lights or from the cigarette lighter, the light show will accompany the car constantly.
3. Fix the device in one of the possible places for placement using adhesive tape.
   At the maintenance station, the installation and connection of the device will also be carried out, but using a bolted connection. If desired, the holes for the bolts can also be drilled by yourself, then this type of installation does not require contacting a service station. The mass of the device is small and, according to the reviews of the owners of the device, it also keeps well on scotch tape.

Installation of laser brake light

You can install a laser projector under a license plate, trunk lid, spoiler or bumper. Some people install it in the cabin, while the light is directed to the road through the rear window. In this case, reasonable precautions are needed to avoid disturbing other drivers. With the correct installation and the correct tilt angle of the device, the driver of the car driving next cannot be blinded by the laser light. In this case, the likelihood of claims from the traffic police is significantly reduced.
The tilt angle sets the distance of the boundary line or the size of the logo.

Is this additional accessory needed?

If possible, why not buy a laser brake light for a car. In addition to the above-mentioned uses, the laser beam can serve as an additional designation for dimensions. For drivers with little driving experience, this device will not be superfluous and will give confidence when parking, driving into a garage and, in general, when reversing.
The housing is made of an aluminum alloy and therefore does not corrode. The power consumption is insignificant and will not load electrical system car.
The price of such an accessory differs depending on the manufacturer, model and supplier. Roughly the cost of a laser stop light ranges from 500 to 2,000 rubles. It's not that much money for added security.

The problem of insufficient lighting when driving is easily and inexpensively solved by a laser brake light on a car. Every driver knows how difficult it is to keep the correct distance in traffic on the road in foggy, rainy or snowy weather. One of the main reasons for emergencies in such cases is the imperfection of the classic car rear headlights.

1 Advantages of laser brake light

Ordinary marker lights or brake lights only signal us with their red light that there is a vehicle ahead of us on the road. However, in fog and heavy precipitation, when driving through the smoke of forest fires or a dust storm, the brightness and visibility of their lights is greatly reduced. If, in addition to this, the taillights are splashed with mud or wet snow has adhered to them, their lights can only be noticed at the very last second. And even no matter how attentive the driver himself is, this does not prevent him from the risk of a "kiss" driving behind the car.

Until recently, they tried to deal with this problem by installing in taillights more powerful lamps. But in this case, a catch awaited the drivers: if in bad weather brighter lamps really improved the visibility of car lights, then in good weather they simply blinded the drivers driving behind. And this also only worsened road safety.

In addition, dim or bright, in fog or on a clear night, common back light has one feature: it is difficult for the human eye to correctly determine the distance to the car in front from its light. But situations often arise when a few extra meters of distance decide everything, reducing the risk of an accident!

The laser helped solve this puzzle. The same one that is used in colorful light shows, painting intricate patterns in artificial fog or smoke. It is not only better than all other light sources that can break through these barriers, but at the same time it also turns them into brightly glowing, clearly visible holograms. Exactly what it takes to get the attention of the drivers behind you, making them not yawn while driving!

2 Ways to connect laser brake light

This system is called by different names: laser car light, laser fog brake light, car laser limiter. All these names are correct, and each calls one of the capabilities of this device, which surprises with its simultaneous simplicity and versatility at a very reasonable cost. For the price of a rechargeable flashlight, you can purchase a set that includes the laser emitter-projector itself, fasteners and power wires with terminals. All this can be installed and connected with your own hands or in any car service.

The way of connecting the laser projector is selected according to the individual desire of the car owner. For example, if you connect it in parallel with a brake light, then it will turn on simultaneously with it, only when the car is braking on the road. So you get the same laser brake light that you may have already heard about from your friends. This method is considered the most effective for those who drive mainly within the city, in the crowded streets and avenues filled with transport. There, the distance between cars is minimal, and you need to react to frequent braking very quickly.

If you connect a laser projector in parallel with the side lights, then it will shine constantly. In fog or rain, it will create a kind of glowing red triangle or "fan" behind the car, which is clearly visible to vehicles walking behind in the thickest fog or during the heaviest snowfall. This is why it is also called a fog lamp!

In addition, where this "fan" of laser light hits the asphalt, a transverse bright red stripe appears on the road, which is visible even in good weather. Psychologically, this trait is perceived as a barrier, a restriction for drivers driving behind it. According to reviews, even those who first encounter such devices have a subconscious decision to keep their distance without breaking this line. Hence the second name of this projector - laser limiter.

Depending on the angle of installation of the emitter, this limiter strip can be set with your own hands at a distance of 2 to 10 meters behind the car. Each driver chooses this distance himself, depending on the type and model of his vehicle, on his driving style. Much here also depends on the roads along which the car most often moves: either it is a highway, where the speeds and distances between transport are large, or it is a city with its crowded avenues and permanent traffic jams. The set distance should correspond to the nature of the traffic flow.

3 Road light show

The possibilities of the laser emitter are not limited to this. After all, he not only helps to ensure the safety of his car, and at the same time the cars driving behind, but is literally a bright decoration. Even in the very simple version strict red trail and laser "strip" behind the car, it already distinguishes it from the "crowd" of other cars. At least until the majority of motorists acquire such laser signals.

However, there is an opportunity to decorate your own car with a real laser light show with your own hands! To do this, you can simply show a little imagination and install laser lights on the bumpers or underbody. In this case, of course, you need more than one laser projector. There is also a much more interesting option - to purchase other complex models that emit not just a fan of red light, but draw patterns, drawings, words on the road. Now such models of laser projectors are gaining popularity and therefore have already appeared on the market.

Thus, the acquisition and installation of a laser signal on a car is good way stand out with your personality and character.

And this is also the rare case when such a desire does not reduce, but increases traffic safety!