Hinged equipment for Motor Cultivator Neva. Hinged Equipment for Motor Cultivator Neva Motor Cultivator Neva MK 80r Rear

Motor-cultivator "Neva" MK80 R-B5.0RS is an agricultural device with which agricultural work can be performed on land plots of small area, as well as land work on a transformation area. Is an optimal option For gardeners and summer houses that need powerful, but moderately dimensional technique.

Using the MK80 Mk80 r-b5.0rs can be performed:

• weeding
• plowing and cultivation of the soil,
• hilling,
• collecting potatoes or other rooteploods.

It is possible to attach the cart. Compact sizes make it possible to carry a motor-cultivator even in a passenger car.

Description

• three-step reducer with low noise;
• high maneuverability due to small motor-cultivator dimensions;
• patented option from the manufacturer - "Parking position", allows you to quickly change the cutters on the primer. In this case, the steering wheel is translated into the lower position, the cultivator is installed on front wheel;
• the high stability of the cultivator during operation - not falling aside, will not ship in the ground;
• powerful gasoline American engine Briggs & Stratton RS750;
• reliable transmission (by placing rear transmission within gear);
• the high torque of the gearbox allows you to grind the soil to the dust fraction;
• upper smelted mechanism - OHV - prolongs the service life of the cultivator and slowly consumes fuel;
• motor engine MK80 R-B5.0RS works in air cooling, therefore does not overheat when working in the summer.

Engine MK80R-B5.0RS

A distinctive feature is a gearbox that provides the development rate of turnover of the output shaft to 120 rpm. This rotation allows not easy to break the soil, but to turn it almost into dust - this will allow the soil to be saturated with oxygen and thoroughly break.

Placing the rear transmission inside the gearbox allows not to use extra belt To switch on reverse. The lower part of the gearbox in this model of the motor-cultivator is reduced - due to this, the clearance created by the aggregate is a lumen between the rows of the Earth. Protective discs on cutters for "Neva" MK80 R-B5.0RS do not allow the cultivator to damage plants located close to each other.

Characteristics

Neva MK 80r-C5.0

Motor Cultivator "Neva" MK 80r-C5.0 - Compact and simple modelused for agricultural work in the country areas of a small area, as well as garden territories. Perfectly suitable for work on a small square, for example, inside a greenhouse or greenhouse. The small sizes of the cultivator make it easy to transport it even in the trunk of a passenger car.

Description

Using the "Neva" MK 80r-C5.0, you will be able to make a musting beds, soil looser, cultivation, plowing, harrowing and creating soil furrows. With additional acquisition of the adapter to the cultivator, you can attach a trolley.

• powerful 5l engine Subaru;
• three-stage low-easy gearbox with steel case;
• low location of the center of gravity, giving motor-cultivator stability and lack of roll to the side during plowing, weeding, harvesting;
• patented domestic option "Parking position" - Development of Russian engineers giving this kind Technicians integrated use of the steering wheel and front wheel. This feature helps to quickly replace the cutter mills;
• optimal maneuverability and stability;
• the ability to handle land near trees, bushes, on greenhouse beds;
• installing protective discs on cutters - a guarantee of minimal damage to plants located in adjacent rows.

Characteristics

Hinged equipment

MK 80 series MK 80 series can be attached to different kinds Hitched and trailed equipment.

From the trailed equipment to all modifications of the MK80, you can attach a trolley (in the presence of an adapter, the kit does not include, it is necessary to purchase separately).

Trailers permissible to attach only if they have a small size, otherwise the motoblock will be rented in the process of movement.

Hinged equipment:

• protective disks;
• mini-soils;
• plow;
• potatoes;
• hiller;
• dumps for snow cleaning;
• harrow;
• ripper pololnik;
• cleaning brushes for cleaning from snow or leaves.

Plow Mole Groundoshames for Plugging Grids for Pahot
Skapper ON-2 Disk Protective Milling Potatoofel

Build and work cutters

Milling cutters MK 80 motor-cultivator standard equipment Contained in the number of two pieces. Additionally, you can buy and install two more pieces. Having an additional cutter or removing the already installed cutters is performed by the operator of the motor-cultivator manually. Cutters are attached to the glues.

Replacing cutters new on the cultivator is performed similarly - the old are removed manually, then new ones are installed and fixed.

It is necessary to perform the installation cutter only in the smooth position of the motor-block when the engine is turned off!

Plow Mer

Plow

To work with MC 80 motor-cultivators, MK 80 use a small mounted plow, for example, a mole plow, as the manufacturer or other is recommended by weight and fastening method. Attach a plow as other types of attachments when the motor-cultivator is turned off and located on a flat surface.

Operating Rules

The main rules of exploitation of the cultivator NEVA MK80 will help to figure out how to work properly with this type of technology.

Change consumables: oil, fuel, exhaust details

SAE 10W30 Machine Oil

Recommendation MK80 Motor Cultivator Manufacturer for Engine and Reducer: For Reducer transmission oil Any manufacturer, for engine - SAE 10W30 API SF / CC Machine Oil, SAE 30 API CD / SF, depending on the time of year, it is possible to change the oil from the synthetic (winter) to the semi-synthetic (summer).

Every 100 hours of operation, check the fuel and air filters On the subject of the ground and wear. Replace filters if necessary. All external parts of the motor-cultivator, damaged, chips or corrosion, must be detected and reinstracted if it is provided by the manufacturer.

Every 500 hours of operation (approximately 1-1.5 years of operation) it is necessary to sort out and clean the engine, it will increase the productivity of the cultivator, and will also increase the overall term of the engine functioning.

Motor Cultivator is not going

If a recently purchased cultivator does not want to go, the reason may be as follows:

• too big angle of inclination (install the technique on a flat surface);
• small oil level in the gearbox, engine (check and fill the container);
• "Not preheated" motor (before starting work with the Earth, give the cultivator to work in half, without loads for 5-10 minutes);
• check the operation of the transmission;
• make sure that there are large garbage between the cultivator mills (stones, etc.).

The correct start of the engine is performed:

• with full fuel tank;
• after warming up the engine on idling for a short time;
• with the integrity and density of all threaded connections.

Video reviews

MT MK 80 Motor Cultivator during Tight Soil Processing

Mark MK 80 Motor Cultivator with Dump during Snow Cleaning

Benefits

Equipment

Set of cutters (3 pairs).

1. User's manual.

   Warranty card.

Description

Motor Cultivator Neva MK-80R-B5,0 RS

NEVA MK 80 R b5.0 RS is a small and easy to use the soil processing tool in the garden plot. Equipped gasoline engine BRIGGS & STRATTON 750 SERIES. Works on gasoline AI-92 and AI-95. This is a motor with a capacity of 5 liters. C, which provides excellent cultivation quality on the most different types Soil, even virgin.

A distinctive feature of this model is the low noise level. The three-step gearbox with a gear-chain design provides an aggregate high performance indicator. The innovative transmission allows the cutter to perform work more productively with a smaller load on the engine. For a comfortable and safe installation and shift of the wheels and cutters, the model was given a unique design - it helps to save space when storing the aggregate.

The cultivator of this model has an unusually large functionality. With it, the user can perform cultivation, cutting furrow, dipping and many other operations. It has an ideal balancing, stable and maneuveran. The folding front wheel allows without complications to move the device on the ground. Despite high power And excellent quality of the price of the NEVA MK 80 refers to the category of budget.

Benefits

Powerful professional engine 5 hp

Low noise for comfortable work.

Transporting wheel for convenient transportation of an aggregate to work.

• The processing width is adjusted from 100 to 60 cm by removing side cutters.

  Protective wings closed the operator from the soil flying out.

  OHV mechanism saves fuel.

Equipment

MK-80R-B5.0 RS MK-80R-B5.0 RS Motor Cultivator.

Set of cutters (3 pairs).

1. User's manual.

   Warranty card.

Characteristics