How to install lateral. Installing lateral windows with your own hands - easy and fast. Installing lateral window deflectors with their own hands - where to start

Now an increasing number of people find interesting use of the side panel for Windows XP. Thanks to this program, you can install various gadgets that look very colorfully, making your desktop more cozy and less dry. Moreover, most of These gadgets are functional applications and facilitates your work for the PC, displaying various functions to the side panel (for example, the countdown, a convenient sound controller, and so on).

But the side panel is not embedded in Windows. In order to enjoy all these gadgets, we need to install the Widows Sidebar program. Please note that this program is the development of the company. Microsoft.Thus, the question of the safety of your computer disappears.

So, in this article we will consider the process of installing the program Widows sidebar. First you need to download the installation file of the original version of this program. Link to file is given at the end of the article. Do not worry about computer security - on our website all the offered files have been tested and rechecked by antivirus. Finding and downloading the installation file, you need to open it, and then you will see the following window:

All applications are optional, since after the installation process is completed, the program will most likely ask to restart the computer. Boldly press the button " Further ", After which the window will be completed before our gaze:

Unfortunately, it is impossible to change the directory of installing this program, so we are forced to submore to agree with the proposed folder and click " Set " Next, there is a quick installation process that occupies an average of half a minute to two or three minutes, depending on the characteristics of the PC. After installation, we appear the last window of the installation, having this type:

For MicrosoftWindowsVista, the side panel is the standard utility of the operating system, which allows you to use the so-called gadgets - useful mini-applications that significantly expand the ranges from the desktop tasks that make a computer more convenient and reduced time for conducting various operations. For the first time, the side panel appeared at the third stage of development of WindowsVista (WindowsLonghornBuild 3683) and then there was also transparency and allowed to launch many gadgets, among which were both rather useless, like "user icons" and extremely comfortable. For example, "DesktopManager" allowed to simultaneously control the four desktops at once, just as it is done in Ubuntu.

Installing the sidebar for Windows XP using the WindowsSidebar program

Unfortunately, many of these gadgets were not included in the final release of Windows Vista, nevertheless, by estimating all the convenience of the side panel, would like to have it and on computers running Windows XP. Microsoft did not develop this program for this version of Windows, but its analogues released other developers, among which, first of all, it is worth mentioning Thoosje Sidebar, Yahoo! Widgets and Google Desktop. Adaptation also appeared original panel Under Windows XP. This is how to use in practice one of these adapted versions, we will talk in more detail.

The side panel must be installed at C: ProgramfilesWindowsSidebar. It is impossible to change it.

After rebooting, you can set the sidebar to the desktop, for which you want to start the following steps:

The side panel will appear after starting with right side Windows XP desktop.

One of the most common types of autotuning, which is available to any motorist, is the installation of lateral windows of the car. In addition to the fact that the original translucent strips on the door frame significantly improve the appearance of the machine, they carry a lot of useful functions.

Installing lateral windows with your own hands - where to start?

The key to the invalid installation of deflectors is their right choice. It should be remembered that deflectors on the windows, and are selected for a specific car model. The brand and model of the machine for which the products are designed are necessarily indicated on the package or are made on the surface of elements in the form of embossed embossing.

Universal deflectors do not happen, since each model of the car has its own unique body design. When purchasing it should be noted that some machines have decorative chrome lining on the doors. For this case, the deflectors perform the imitation of chromaslast, so that it does not spoil the type of car.

Currently, the release of deflectors is engaged in a large number of manufacturers, including Chinese. Original deflectors will cost an order more expensive, and must be left for a car owner. Before you pay for the purchase, it is necessary to try each deflector on your place. In the case of the slightest mismatch or lines of bend, it is necessary to replace the entire kit.

What does the installation of deflectors on the windows of the car?

• the car's salon is partially protected from sunlight;
• when moving, an aerodynamic stream is created, which takes towards dust, garbage, small road stones;
• in rainy weather you can drive with opening windows;
• air injuries allow to ventilate the salon, which helps passengers if the driver smokes.

The installation of deflectors on the window can be made using metal brackets, gluing to the outer surface of the door frame or mounting between the sealing rubber of the rolling glass and the frame of the door. The first method showed itself as impractical and out of everybody. Metal brackets and rigid fasteners led to scratches and chips on paint and varnish coating. In this regard, two other options should be considered.

How to install deflectors on windows with gluing?

The overwhelming majority of models of deflectors are already equipped with a sticky tape for gluing them to the door frame. This significantly facilitates the work, but, on the other hand, forcing the process with the maximum responsibility, because with unsuccessful gluing, it will have to leave the deflector overwhelmed or tear it and dispolate it again.

To install deflectors, it is necessary to choose suitable conditions. In a place where the car is located, it should be warm and dry. The body must be washed and succeeded. Ideally, the procedure is performed in a warm windless summer day right on the street. For work, except for a set of deflectors, you will need: dry clean rag and any degreasing liquid (alcohol, "antisilicone" or ordinary vodka).

Installing lateral window deflectors is made according to certain rules. With deflectors, protective packaging is removed (usually it is a plastic film from two sides, it is not removed from the adhesive strip). Then they try on the installation site, simultaneously to the front and rear door, accurately defines the place of gluing. The door frame in the place of gluing is cleaned and degreases with a cloth moistened with a prepared liquid. In the front and rear of the deflector, a protective film from the adhesive layer is somewhat 3-4 centimeters, the ends are output, and the deflector itself is applied to the place and its edges are glued. Making sure that it is installed correctly, the film is removed from the rest of the adhesive layer. Next, you should press it to the door frame along the entire length of unlock presses. Such an operation is similarly repeated with each door.

Installation instructions for installation deflectors without gluing

Among the models of deflectors, you can see such that do not have strips for gluing and other mounting devices. Some models of cars, such as the VAZ "Classic", allow you to install deflectors without securing. The dimensions of the plates are selected in such a way that the edges rest in the corners of the window frame, and the side is pressed with a sealing rubber of window glass (venge). Installation of deflectors in this case is extremely simple.

Before inserting elements to a regular place, it is necessary to lower the glass and with a fine plastic plate to reveal the rubber seal from the outer part of the window frame at the installation site of the deflector.

By itself, the rubber band is not specifically glued, but can stick to the anti-corrosion lubricant, which is processed by the window frame after painting. A little flexing deflector in the middle part, the outer side is inserted into the gap between the seal and the door frame. The correctness of the installation is verified by the closure of glass, which should be easily included in the seal grooves.

Problems when installing deflectors on side windows and their operation

As in any other case, in the process of installing deflectors may occur. Although for gluing manufacturers of tuning elements try to use high-quality glue compositions, such famous brands As "ZM", but it may happen that the strip is partially not glued, or is dugs during operation.

Assist in such a situation can bilateral assembly tape. For repair, it is necessary to cut the scotch strip of the required size, stick it with one side to the deflector, and the second to the door frame, observing the above algorithm of actions. You should also proceed if the deflector has to translate, but before that it is necessary to wash the place of gluing a warm soap solution or wipe the solvent.

Is it possible to install the side bar do it yourself?

• Weapons
• Planck
• Drill
• Metal drill
• Kerner
• A hammer
• Thin pliers / Tongs
• Pencil

To properly install a tide on the trunks, you need to match the shag-like protrusion on the AK with the hole below it on the bar. The photo is marked with color.

Pins fixing USMs serve as an additional installation marker

Now it is necessary to make the stamps for the screws. It is easy to do with a pencil.
Be careful! The bar must be moved as much as possible, and the front part is the down.
Why Forward: The plank with the installed bracket and optics will move forward under the influence of returns, so it is necessary to completely rest in the stopper.
Why down:in the extreme lower position of the front of the plank, it rests on the stopper and it is in this position of the prism in parallel the aiming line. If you neglect by this, in the future there will be difficulties with vertical amendments.

Pencil markers are excellent visible

We take Kerner and watch the holes so that the drill does not slide over the surface

We measure the holes in the bar and we get 4 mm, which means the drill is also 4 mm or higher. We had a drill of 4.5 mm, because The nut is fixed with the reserve, stopped on it.


Extremely recommend using a durable drill, because The cheap is most likely erased earlier than you drill a hole, the box is very strong. We used this.

Remove the store and drill. Be careful with the power of pressing, of course, it is unlikely to touch the drill, you damage something inside AK, but you should not lose your vigilance. After drilling, the box will look like

Now you fix the bar on the box to contact the nut inside we use the nippers that were at hand.

Planck stands reliably. To close the question, you can finally use a threaded lock, but with normal operation it is unnecessary.

Now we install our side bracket on the tide, for example, with a visibility mounted on it for

All about everything we left for no more than 15 minutes. So the conclusion suggests itself: in the presence of the most simple tools and skills of working with them, the installation of a side plank-base for AK, Saiga, or VPO it is not difficult. We hope our article will help you in this simple matter.

If you want to receive information about new articles and reviews, use the subscription form under this article.