Connection diagram and plotting of the glass windows of the VAZ. Connection Scheme and Power Window Button VAZ Connection Connection - Scheme

In our country, a large number of car enthusiasts choose the VAZ 2107 model due to low price And good reliability. Some nodes and systems of this machine are poorly automated, among them mechanical windows, which often fail or work with malfunctions. To install automatic windows, no special skills are required, there are many inexpensive sets for VAZ 2107 on sale.

Pluses and cons of factory windows on VAZ 2107

On this model, mechanical windows have 4 rollers to stretch the cable. Now there are no windows in front, which were installed on previous versions. When breakdown lifting mechanism Glass community and the ability to open the window will not.

Of the advantages of factory glasses worth noting:

• simple principle of work;
• fast repair;
• low cost of components.

But the design has a number of negative points:

• a short service life;
• if you get inside moisture or frequent temperature drops, metal parts are wearing;
• over time, the rubber seals are ceased to perform their function;
• the appearance of an unoperable screen when opening the window;
• the appearance of scratches on the glass.

Modern sets of automatic windows allow you to open windows by simply pressing the button. IN last years Many motorists are engaged in the replacement of this assembly of the car, especially since this work is completely simple.

Installation Instructions

Before installing a new set, you need to deal with the dismantling of the old glass. Understanding how the whole design is arranged, it will be easier for you to install automation and adjust it correctly if necessary.

Instruments

To work, you need to prepare:

• a set of keys;
• flat and crusading;
• pliers;
• scotch for fixing glass in the desired position.

How to put (step by step with a photo)

To shoot the factory mechanism is needed in the following order:

1. Lower the glass down.
2. To remove the side handle, you need to disconnect the lock washer. Flat dummy push the edge of the washer and remove it from the engagement. We carry out this work neatly, without the use of rough physical strength.

   To dismantle the decorative door panel, you must first remove the handles using a flat screwdriver

3. To access the inside of the door, remove the decorative panel.
4. To relax the tension roller mounting bolt, we use a crusader.

   Weakened the fastening bolts using a crosswinter

5. Shift tension roller, weaken the cable and remove it.
6. 3 nuts fastening the lifting mechanism are unscrewed by the key.

   Nuts are removed using the R8 key

7. Pull the entire mechanism through the disc.

Tip: Attach the wire to the ends of the cable - it is allowed to reduce the time of re-assembling the entire mechanism.

Connection and installation scheme

Despite the fact that there are several sets from different manufacturers, not all of them are suitable for VAZ 2107. This is due to the design of the windows and the form of the door, we recommend purchasing a set from SPAL. It is well suited in size and quickly installed. Before installing, carefully read the instructions and disperse in the connection scheme.

1. Disconnect the minus battery terminal.
2. We raise the glass up and fix in such a position using the tape.

   Count the glass in the upper position using conventional tape

3. Choose a place to install the electric motor and mount it.

   Fix the electric motor in the doorway with the help of self-tapping screws or bolts

Each car owner tries to do everything so that the trip on the right four-wheeled friend was comfortable and enjoyable.

Currently, the car is not a luxury, but rather need. After all, it is by car that many have to get to work, and bring products with their own cottages on personal car Much easier and more profitable.

Unfortunately, comfort and convenience without an electric lift of the glass is quite problematic to get. But almost all the so-called classic domestic models of vases were provided to buyers only in this version. As a result, the glasses - both on the driver's door and on passenger - it was possible to open exclusively with the help of hand lifts, which, naturally, is inconvenient and impractical. Power windows in the electrical version of the execution manufacturers were not installed, both in the eighth and ninth models of the Zhiguli, and after all, these cars were considered the most sought-after.

The owners of the "classic" models can be independently changed this situation, because the installation of windows, for example, on the VAZ-2107, if it is carried out strictly according to the instructions, will not cause special problems and difficulties. As properly and in what sequence, experts recommend installing windows on the front door of VAZ-2107, we will analyze further.

Phased installation process

Having in his own arsenal, the necessary toolkit, each car owner will be able to independently upgrade the lift automotive glass. Purchase such a mechanism is quite simple, contacting this in specialized stores. But that ESP served faithfully for a long time, the choice should be given to reliable and proven manufacturers. According to experienced drivers, the highest quality windows are considered:

• Forward;
• Garnet;
• Golden eagle.

For work, you can use both plank or rush windows, and working with a cable.

The windows are a vehicle assembly that allows you to make the conditions of the trip more comfortable. VAZ 2107 manufacturer sets manual windows with cable drive. Many drivers are installed as tuning themselves independently power windows (ESPs) on their car VAZ 2107. The article describes their design, the dismantling instruction is given for repair and installation with their own hands.

[Hide]

VAZ 2107 windows device

The windows on the VAZ 2107 consists of the following details:

• handles lifting glass;
• finishing sleeve with landing place for handle;
• handle sockets;
• mechanism for lifting glass;
• lower roller;
• fastening bolt and nuts for the bottom roller;
• fastening screw for pressing plates;
• top rollers;
• pressing plates;
• side glass;
• cable;
• brackets for fixing glass;
• tensioner roller.

The main difference in the design of the windows for VAZ 2107 from similar mechanisms is a cable and tensioning roller for it, which are used when the mechanical drive operation is used. It was necessary to resort to such an embodiment of the design due to the absence of a side window on the VAZ 2107.

Manual how to disassemble windows

In order to independently replace the power windows on the VAZ 2107 or repair, first of all it is necessary to learn to dismantle them. Data knowledge will be useful when encamping the lifting mechanism due to moisture from entering through the gap between the seal and glass. In this case, the mechanism can be repaired.

On this, the replacement of mechanical windows on the VAZ 2107 is completed with their own hands. Now you can proceed to check and adjust the installed device.

Taking advantage of the installed electrical drive, raise the glass up. It is necessary to adjust the mechanism so that when the glass is raised to stop, there are no gaps left. After checking and adjusting, you need to put the door trim in reverse order. Instead of the handle of the mechanical windows, install the plug.

Installing electrical windows with your own hands increases comfort to the driver and passengers thanks to the ability to control the opening and closing of the side glass. In addition, the presence of power windows allows you to adjust the alarm so that all the glass is automatically closed when arming.

The ability to dismantle and install windows on the VAZ 2107 with their own hands makes it possible to save on visiting the car service.

Video "Installation of electrical windows"

In this video, Sergey Zukol tells how to install electric lifts for glass on VAZ 2107.

Electric windows VAZ-2110 will significantly increase the degree of comfort in the car. But any models of devices have malfunctions, sometimes the door glass encourages - does not open or not closed. In this case, as a rule, it is necessary to change the whole in some cases independently repairing the mechanism. Sometimes the encoding occurs due to the fact that not enough lubrication. In this case, you just need to clear the contamination after which we apply a new lubricant.

Electric windows for "dozens"

When VAZ-2110 cars began to be produced, there was no power windows in the configuration. They were installed very rarely, mainly at the request of the buyer already directly in the auto show. Most motorists are trying to save on repair, so instead of contacting specialized centers for car repair, service is carried out on their own.

To date, there are a lot of sets in stores for installing windows with VAZ car. The easiest and cheap kit includes only only electrical engine With gearbox. With such a kit, you can replace the electric windows in the VAZ-2110, but it is better to purchase full sets.

Choosing windows

Before installing new mechanisms, find out what specifically types and brands recommend experienced autosleys. On the shelves of automotive stores can be found devices manufactured by Berkut and Granat. These are the most popular mechanisms, as they have a fairly low cost, but reliability at height. Three varieties of electrical windows can be distinguished:

1. Very high speed of movement of glass provide articular windows. But they have the greatest cost - the kit on the front doors has the price of 2500 rubles. But the quality of execution and resource is very high. When the mechanism is working, there are practically no noise. It is very difficult to break this device, even when the brake is freezing, the electric motor and the mechanism will not fail.
2. Rank windows do not differ in good quality. If the glass freezes, it can break part of the drive or fail the engine. To ensure good work of the entire mechanism, it must be lubricated very often.
3. The cable type of windows is the most budget of all. The speed of movement of the glass is very slow, during freezing the cable can break through, the engine fails. But if such an electric windows in the VAZ-2110 does not work, it is not necessary to repair it, it's easier to buy a new one.

What to pay attention to when buying

Of course, 20 years ago, this type of electric windows VAZ-2110 would be the limit of dreams for any motorist. But today, when on the shelves of shops can be found for quite modest means, much better mechanisms should not be given their preference for cable glass windows. It is impossible to even imagine how much VAZ-2110 is in such a configuration in the late 90s. Perhaps it was the first car after the famous 600-Mercedes.

During the purchase, you need to pay attention to the package of glass. It is advisable to acquire those in which there are electromotors, all the wiring, buttons, plugs, fasteners, cuffs of rubber. With the help of cuffs, electrical wiring from doors in the body rack is stretched.

Preparation for installation of electrical windows

Before starting work, you must purchase all the elements for repair. Be sure when working, you need to disconnect a minus terminal from the battery. If it is impossible to do this for any reason, remove the VAZ-2110 fuses that are powered by the instrument panel, backlight, control buttons, car cigarette lighter.

When removing the plating the front doors, be sure to damage a few clips. Therefore, buy a lot of dozens of these plastic parts about the stock. They have a small cost, so the purchase will not hit the pocket. Be sure to study the WAZ-2110 car scheme, if you do not know where to connect electrical windows. If you will navigate the electrician machine, the installation of the wiring will be carried out very quickly.

Removing the old windows mechanism

But before installing the WAZ-2110 electric windows, the fault of which will be discussed below, you need to completely remove the old one. In general, all work can be divided into several main stages:

1. Carefully, trying not to damage, remove the front door trim. The set of power windows consists of two mechanisms and drive engines. Therefore, it is necessary to put them on the front doors.
2. Using the tape, you must install the front door glass in the upper position. The main thing is that when dismantling the mechanism does not fall inside the door.
3. Unscrew the bolts of fastening the old mechanism and the glass key to "10".
4. Find the guide, it is fixed on the door with 4 nuts. First of all, you need to unscrew the bottom, then the average, and the most recent upper.
5. The handle of the window is mounted on the door with three nuts. They are twisted last.

After that, you can completely remove the mechanism. If it is impossible to remove it from the door, it will be necessary to prescribe to the top mounting screwdriver. After that, it is necessary to clean the inner space of the door so that there is no dust and dirt. If necessary, you can stick noise insulation. It is necessary to do this if you do not want to disassemble the front doors several times.

Installation of new windows

In order to install the power windows on the VAZ-2110 car, you must first place it in the inner space of the door. To do this, you will need to start it in the largest technological hole of the door. Further work is performed according to which algorithm:

1. The mechanism is fixed on two studs, which are installed in the holes where the middle nuts of the old windows mechanism were located.
2. Align the fasteners on the glass and the mechanism. To do this, you need to connect the electric motor to rechargeable battery. After combining the holes, you lock them with the help of bolts, you will find them in the kit.
3. Since when working great friction occurs, it is necessary to lubricate all the rubber surfaces. It is advisable to use the composition of the SCR-4.

Connecting electrical equipment

Now that the windows work correctly, you need to connect them. If you are not sure about your abilities, please contact your experienced electrician. If you are confident, you can start mounting. To do this, select a place to set the control buttons. It is desirable to have them where there will be free access to them as a driver and a passenger. Therefore, the most good places to install is a niche under the handbrake, as well as in the beard of the front panel.

After installing the buttons, you must pave the wires to the power supply through the VAZ-2110 fuse block. It has several backup slots, with which the power windows can be connected. From the electric motors in the doors, the wires are kept to the body rack, and from there to the control buttons. Be sure to apply electromagnetic relays to save the high current switching buttons.

Frequent breakdowns

Regardless of which the type of electric windows is installed, they can still fail, and all breakdowns are divided into mechanical and electrical. The latter can be attributed to the VAZ-2110 window of the window. Possible malfunctions:

1. If the electric window lifter completely refused, the reason may wonder that the cable was cut, or it was bored. If the windows or lever windows, look for a breakdown in the mechanism.
2. The failure of the electric motor due to water entering. Very often there is such a breakdown, since the electric motor is leakage. A condensate sometimes seeps into it, a rust appears, which can cause huge damage to the electric motor.
3. The breakdown of the electromagnetic relay - the windows will not be able to work, since the power supply voltage is not fed. To check the relay performance, you must install a well-serviceable item.
4. Check in the VAZ-2110 fuse block the corresponding fuse insert. If even when installing a new relay, it turns on, then you need to look for a malfunction in the power chain. Replace the fuse to the new one. In the event that it burns very quickly, it will be necessary to find, in which place of electrical wiring there is a short circuit.
5. Very often breaks the WAZ-2110 window. It is enough to check enough, you need to install a new one, or close the wires using a metal object.
6. When the power circuit breaks, it is necessary to find a place after which it is possible to restore.

Very often there is a break between the stalk of the body and the door. Since the door constantly opens and closes, the wire bends, it is collapsed over time. To correct this position, you must pave a new wiring.

Conclusion

Rarely what kind of equipment VAZ-2110 was equipped with electric glass lifts. Therefore, the installation will have to be produced on its own. Try to do everything as high quality, plug the drives to car alarm so that it brings the glass when arming.

Not all VAZ 2109 cars are equipped with a plane with electric windows (ESP). And if during the time when the serial release of "nines" was just beginning, the electric windows were rather luxury for the domestic motorist, today the "oars" today on the doors of the car - rather an exception than the rule. Fortunately, the domestic industry produces electric windows for russian carsInitially not equipped with them, including on the VAZ 2109. These are the electric windows, we will establish on our Lada Samara do it yourself.

Types of electric windows and which of them are better for VAZ 2109

Esp is of different types.

• cable (weak and very leisure, plus in low cost and possibilities to replace a single motor if he suddenly burns);
• racial (weak, by operating experience - require regular lubrication);
• hinged-lever (work quickly, nozzily, powerful enough: it is easy to cope with sample glasses).

Stop your choice on the latter, called "Granat". Moreover, the set of these ESP includes everything you need to install - wiring, buttons, plugs, all necessary fasteners, rubber cuffs for stretching wiring from the rack inside the door.

Also there is "Katran" and "Berkut", they have a slightly different device and the installation is slightly complicated, but according to reviews, too, good.

Installation I. circuit Connection Scheme VAZ 2109: Step-by-step instructions with photos

1. Before starting work, you must turn off the power of the car on-board network from. Either we turn off separately the cigarette lighter power supply chains and, because To these circuits will continue to connect the power supply of windows.
2. Remove the upholstery door. It is shooting enough simply, while better stocking with fastener pysters.
   
3. First of all, we dismantle the mechanism of the regular manual windows, fixing the glass (for example, using the stationery tape) in a position that provides access to the location of its fastener to the lifting mechanism.
4. We unscrew the door glass mounting bolts to the mechanism of the standard window lifter.
   
5. We dismantle the guide of the regular mechanism of the windows (trapeze). We unscrew the bottom nut:
   
6. Two nuts in the middle:
   
7. Upper nut:
   
8. The guide is free, now it remains to unscrew the three nuts fastening our window lifter in the area of \u200b\u200bthe rotation handle.
   
9. We take out the entire mechanism of the windows of the door. To do this, we derive the lower heel of the guide to the hole in the door (see photo).
   
10. Pressing a screwdriver, remove top mount guide.
    
11. Ready, the mechanism of the window lifter is disconnected. We take it out of the door cavity.
    
12. All, the regular mechanism is dismantled, proceed to installing a new one. A new mechanism is attached with the help of regular fasteners, nothing new to drill. We place the mechanism of the windows into the inner cavity of the door through the largest technological hole in the "assembled" form (otherwise it does not fit), as if in the position of the glass "openly".
    
13. The mechanism inside the door is fastened for two studs that insert into two holes that previously held the middle part of the guide regular window lifter VAZ 2109. We combine them and retard the nuts.
    
14. The following task is to combine fastenings on the lever system of the window lifting with a fastening on the glass. This can be done by submitting power to the contacts of the electric motor of the windows voltage from external source Nutrition, such as any working car battery.
    
15. When the lift mechanism is combined with a glass plank, connect them with the bolts from the kit.
    
16. Drinking details are preferably lubricated.
    
17. The mechanical part on this is completed, go to the electric.
18. We pretend the track for wiring out of the door from the electric motor of the drive drive to the installation of the buttons - activators. The regular place for the buttons in the high panel of the VAZ 2109 is two plugs to the right of the cigarette lighter, and install them there. The most difficult thing is to drag the wiring from the door to the rack, and then remove from the rack under. For this, there are technological holes in the rack. Perhaps you have to take advantage of a special probe. Wiring we carry out a wire with a cross section of at least 1 mm. sq. Wires deploy with such a calculation so that they do not concern any moving parts of the door and the mechanism of ESP. Power supply electric windows will take from the cigarette lighter. Electrical connections We produce according to the following scheme:
    When the scheme is collected, you need to connect the battery power and check the correct operation of our system. We include dimensional lights and check the correctness of the highlighting of ESP activator keys. If the backlight does not work, change the jack on the keys to the keys marked on the diagram as 3 and 6. You can put the windows standard way, Here are two schemes: