Flushing Wynns nozzles through gas station. Winning wynns injector. Fluids for diesel systems

the main / Terms

Probably most Russian motorists at least once come across the need to flushing injectors of engines and cleaning fuel system car. Very often, such a problem becomes relevant during the period of melting of snow. At this time, the operation of the car becomes especially difficult. Let's see why there is a need for flushing and is it possible to perform the procedure yourself. Also, many are interested in the question, there are means, after which will be a guaranteed result. Many argue that the washing is very effective. Let's look at how this product is effective.

Why do you need to wash the injector periodically?

As part of any brands of domestic fuel, there is also a fuel itself, a mass of various additives and impurities. At the expense of benzene, olefin, water and sulfur manufacturers of gasoline try to increase octane number. Also very often contains gas condensate.

Such a fuel harms the fuel system and the car engine. All harmful impurities during the operation of the car accumulate inside, as well as outside the injector and in the fuel channels in the engine.

When to wash the injector?

Any car owner on how the engine behaves, will be able to determine the need to clean the injector. Often, the following signs speak about the need for service:

Significantly reduced power power aggregate.
The car is badly started, which is especially noticeable in winter.
The operation of the motor becomes uneven and unstable. It is best noticeable at idle and in transient modes.

Also, the car is slower gaining speed, the level of toxicity increases exhaust gases. "On the hot" fails, detonation appear. If several of these signs are observed during the operation of the car, this indicates that the injector washed urgently.

Auto chemicals Wynn's: Why motorists choose these products

The modern market offers a lot of different cleansing agents for the fuel system of the car, including the injector and nozzles. But not all of them are equally effective. Car owners tried all the proposed options. Now there are two who really work. It is expensive Japanese products, as well as washing with "VINS" - it is much cheaper, and the quality is the same.

Products are produced in Belgium. The company operates in the global car chemical market for more than 5 years. The main advantage of the products of the Belgian brand in front of various imported and domestic competitors is a number of strong solvents in the composition. Due to the fact that Wynns is washing, created on the basis of competent selected components, from the first minute of use of the means, it begins to actively dissolve solid sediment layers of various thicknesses. This is a big plus.

Wynn washing properties "s

Washing "VINS" very qualitatively cleanse not only the injector, but also other nodes. The product effectively copes with valves saddles, details of the piston system. Suitable for processing rings and pistons, cylinders. It does not need to disassemble the motor.

Belgian injection cleaner for injectors and nozzles helps to restore the characteristics of the spraying torches of the mixture and the optimal periods of its intake. The liquid is almost perfectly laundered from deposits and accumulations of exhaust valves and prevents them in sticking. Washing "VINS" allows you to eliminate detonation during the operation of the motor and facilitates the launch of the power unit. The manufacturer declares a significant decrease in fuel consumption.

All this makes Wynn's production leader in terms of sales in almost all countries of the world. In the line of liquids there are products for petrol enginesand for diesel engines. These cleansing washes are suitable for self-use on all models of injection vehicles. This was proved millions of car owners all over the world.

How to clean the injector with VINS liquid independently? Preparation

Washing "VINS" - very simple procedure. To prevent the engine, you need to access the problem of the unit. It is best to perform work on the algorithm that offers a manufacturer in instructions.

So, you need to start the car engine. Then you should remove the fuse responsible for the functioning of the fuel pump. It is necessary in order to drop pressure from the fuel system. After that, it is necessary to remove terminals from nozzles and hoses for fuel supply. Next, carefully dismantle the ramp with nozzles and sealing rings. Now there is free access to the injector. Now it is worth considering how the washing of the nozzles "VINS" is carried out. The principle is not to give the fuel nozzle to skip fluid when the valve is closed, and vice versa.

To clean, use the VINS liquid, as well as a special device that will help blow liquid through the fuel injector. An ordinary plastic bottle is suitable as this device. It connects with the container in which the liquid is located. Then the bottle is connected also with the inlet opening on the nozzle. As a result, a convenient device is obtained by which the injector cleaning will take a minimum of time.

Flushing process

Now you can proceed to cleaning operation. Liquid is passed through the nozzle - for this, the valve is periodically open and closed. This procedure must be repeated until it is necessary to dispense. If this does not happen after cleaning, it means that the detail failed. Next, cleaning is performed again.

If inside the injectors and on the surface of the walls of the injector, sediment layers are visible, then Wynns (flushing) should remain within the nozzle for some time. Only so you can clean the injector as high quality as possible. It is worth stopping only when the shutdown seat on the valve is perfectly clean, and with it and the holes of the injector. At the end of the procedure, all the details are collected in reverse order. This is finished cleaning the injector. The results will be visible after a while. The engine will start working more stable, the fuel consumption will be reduced.

Diesel engines

They suffer from poor-quality fuel and these motors. Like gasoline, diesel also contains various substances that do not better affect the state of the fuel system. The nozzle in the course of operation is also exposed to high temperature loads. It works under great pressure. If you add a fuel quality to this with an increased percentage of heavy fractions, it can be said that the flushing of diesel injectors should be carried out even more often than servicing gasoline.

So, in the process of operation of the motor, as well as hot, but already disabled Engine, on the surface of fuel nozzles, the residues of the fuel are converted into consistent sediments. Sometimes Nagar appears. Gradually, these layers are becoming thicker and thicker. Over time nozzle and stops spraying fuel to the combustion chamber. Because of this, the normal operation of the motor is disturbed.

When to process?

Flushing is necessary when:

The engine is worse.
On idle turns appear interruptions.
In the intake path there are various sounds - more often cotton or sneezing.

Also about the need to clean the failures with a sharp set of revolutions. In general, signs are the same as with gasoline engines.

Wynn "S for diesel engines

The Belgian auto chemical manufacturer did not forget about the owners of diesel engines. For them, there is also such a means. According to reviews, it is quite effective. The flushing of a diesel engine is carried out a little different.

The liquid is poured into the container where the fuel supply hose is then lowered. The reversing fitting is lowered there. Next, drive the motor. It is necessary that the engine worked with this agent of 30 minutes. After the time, you will notice that the fluid has become darker. By the end of the process, the tool will be practically black.

When the washing with "Vince" diesel is already completed, it is necessary to make a motor on pure fuel. At this point, the cleaner and remnants of deposits are washed out of the system. Next, the hoses can be connected back.

Conclusion

So, we found out how to clean the nozzles on their own. "VINS" is an excellent means to remove deposits in injector power systems. This product You can purchase both the market and specialized stores. The main thing is not to buy fake goodsotherwise the efforts will not bring the result.

Many owners of injection cars know how unpleasant, irritably, when your iron horse begins to behave suspiciously. At first, these minor troubles appear when the engine is idling at idle. Such a work of idling is accompanied by unstable work The engine is heard arbitrary cotton. The intensive set of revolutions falls, and the fuel simply disappears. But you continue to ride. And the washing of the injector quickly corrected the shortcomings of the motor.

After some time, the steel heart simply intends to jump out from under the hood of your car. This condition of the car is completely unacceptable. The reason for this, first of all, can serve - the appearance of certain substances in the fuel system that impede the normal operation of the engine. Remove these contaminations will help equipment for washing the injector. And use chemicals Wynns (Vince), Lavr - Clean the entire system fully.

Other possible problems of system malfunction should be excluded: Fuel pump, filter, fuel grid. These faulty (clogged) elements can also be the cause of engine illness. Experts are recommended to carry out the prevention of the fuel system in 30-40 thousand km.

Injector clogging

All foreign bodies and substances (insoluble in gasoline) that can get inside the gas tank of your car - easy will stop fuel filter And other technical devices (grids). But the fact that then happens with fuel, directly inside the nozzles, ramps and the engine itself - the lack of fuel production technology. Gasoline or diesel fuel consists of substances that are crystallized when heated. What leads to the formation of slags in the fuel supply elements.

Independent injector cleaning

Perfectly fighting with all sorts of insoluble deposits - Wynns, Laurel and cleaners like them. Consider the situation - flushing the injector with your own hands. You will need a set of common spare parts. How much is it all? Cheaper than doing on the service, and the set will remain with you. And can be used more than once!

Set of sought-after parts:

fuel conductive hose (1.5 m);
injector filter (1 piece);
clamps (4 pieces);
wheel nipples (2 pieces);
plastic bottle (1.5 l);
automobile compressor;
fluid for washing (Wynns, LavR).

Mount the system for the likeness of the dropper, which is posed. The hose is cut into two parts in such a way that one end is connected to the fuel ramp, and the other to the injection filter. The second half of the fuel hose connects the filter input with the bottom of the plastic bottle (to the nipple). Drill the plastic bottle cover and bottom. We install in both nipple holes. From the nipple, which is mounted on the bottom of the bottle, unscrew the nipple. All connections are tightened by clamps.

How to rinse the injector yourself? Washing the injector does not require special skills. An alternate sequence of actions should be performed. Here is a strict ordered set of actions to perform repair and restoration work (cleaning the WynNS) of the injection system with your own hands.

Operate the fuel tank cover for pressure relief. Remove fuse fuel pump.
Disconnect the fuel supply hose from the fuel ramp. If there is a return - disconnect it and close the output with a bolt. Connect to the ramp my own-made system (fix the clamp).
Eggplant fill with VINS or LAVR liquid (0.5 l). Hovering a bottle for hood hook (torn up). Connect the compressor to the nipple of the neck bottle. We give 2.5-3 atmospheres. Next, support these numbers.
We start the car. Engine works on idling Until full fluid generation (Wynns, Lavra), until the motor itself stalls. Follow the compressor pressure gauge and keep pressure.
Motor stall. Give a rest to him for 30 minutes, while keeping the pressure. After 30 minutes, we discard the pressure. Top the remaining 0.5 liters of Vince or Lavra. Create pressure compressor. We start.
The engine operation at this stage must be accompanied by a periodic increase in revolutions. Click it is reasonable to the accelerator pedal, how much does the motor allow. Follow the manometer to the full flow of flushing fluid.

Vince ran out and the motor became. We reconnect everything as it was a wound. Perhaps it will be needed to replace the oil and a new set of candles. We bring the car and go ride. It is enough to drive a test 30 km to sense the improvement of the engine.

Acceptable liquids

Choose a cleaning agent is easy. Wynns, Lavra - they really cope with their task. Be sure to see the annotation of detergents. Are they suitable for your car.

Vince is a rather powerful tool that is able to disperse all the slags, which accumulated in the ramp, electroclap. But it does not prevent the replacement of sealing rings on the nozzles. Lavra is a similar means, but it is more expensive.

Injector washing service

Car service is provided with a washing of the injector. The device for washing the injector will suit any, it is not so basically as the qualification of the performer itself. The result is important to you. Of course, the service station will carry out more detailed service with a possible follow-up warranty. But do not forget how much such services will cost. Especially if your car travels a lot, it will take at least the prevention of the entire system with the use of Vince.

It will be relevant to take advantage of the technical service of the bus station, if the electroclap is very stubble. The ultrasonic installation for washing the injector is able to free from the baked dirt. To do this, removed from the fuel system a set of nozzles - amenable to ultrasound processing. After that, the operation of the nozzles is checked on the stand. The torch of spraying, intensity is taken into account. A STR can also offer an imbalable service - washing the injector.

Equipment for washing the injector is not significantly different from our proposed scheme. It is worth such a service much more than - to make himself. It is worth saying about the existence of various other cleaning methods. But they are less popular, as they have side effects. It is not recommended to pour chemicals like Vince, Laurel in the benzobac. Such an action can raise all the evil, which will go to the fuel system.

Remember dear motorists! The washing of the injector refers to such a procedure that can protect you from expensive purchase. A set of nozzles - an inadessive pleasure. The injection washing fluid should be selected with full accordance with operational requirements Fuel distribution systems of your car.

Well no

for gasoline engines

Wynn "S INJECTION SYSTEM PURGE Cleaning agent for removing dirt and deposits in gasoline systems Injection without disassembly.

Cleans valves, injectors, combustion chambers and other fuel system parts gasoline engine Without dismantling components.
Restores spray nozzles.
Improves the ratio of the balance of cylinder compression.
Frequent adhesive exhaust valves.
Improves the balance ratio of air fuel mixes.
Restores the injection time to the initial value.
Restores good engine performance.
Eliminates problems with spontaneous engine stop, uneven idle turns, as well as poor engine performance caused by contamination of the fuel system.
Reduces the toxicity of exhaust gases (CO and HC).
Safe for spark plugs and the entire exhaust system.

Applicability

It can be used on all fuel systems of gasoline engines such as - carburetor, permanent injection, multi-injection, mono-injection, direct injection (GDI, FSI, ...).
It is recommended to clean every 20,000 - 30.000 km or when problems occur: non-permanent idol, poor pickup or dirty.

Note

Wynn "S INJECTION SYSTEM PURGE for professional use.
Apply only using FuelServe installations.
Treatment time for optimal result: 30 - 60 min. (Instructions for use-, see the instructions for use on Wynn equipment "S).

Packing

No. W76695 - 12x1 liters. - EN / FR / DE / NL / ES / IT / RU / PL / PT

NOTE

Do not add to the fuel tank.

Features

Professional Series

All new and used cars are sensitive to fuel quality, chemical additives have been developed to obtain the optimal engine power and comfortable driving company WYNN'S. Modern fuel systems have a very accurate setting, and therefore they are very sensitive to various kinds of negative impacts from chemical reactions occurring in fuel. This leads to clogging the fuel system, poor lubricant, corrosion and other problems. On used cars, problems arise to obtain the right fuel mixture (air / fuel ratio) and its combustion efficiency. This is due to the accumulation of deposits in the fuel system and wear of parts.

Related products

Professional Series

Wynn "S Petrol Extreme Cleaner (Petrol Clean 3) is a chemical additive for gasoline engines, provides a powerful cleaning of the fuel system of gasoline engines as a result of a single fill of the product. Quickly cleans and protects the injectors, restores and maintains the optimal mode of the fuel mixture in the combustion chamber.

The aircraft engine cleaner of the gasoline engine is an extremely powerful means for cleaning and removing soot and other contaminants. These sediments and dirt reduce air intake, worsen the operation of the exhaust gas recirculation valve (EGR), lambda sensors come into disrepair. All this leads to ineffective combustion, uneven idlingIn some cases, the engine spontaneously stalls.

Wynn's Catalytic Converter & Oxygen Sensor Cleaner- Chemical Additive for Gasoline and hybrid engines, optimizes the efficiency of catalytic neutralizers and ensures optimal lambda (oxygen) sensors.

The first signs of a contaminated injector - engine power loss, increased flow Fuel, failures and twitching during acceleration, unstable idling speed. It's no secret that the quality of domestic fuel leaves much to be desired. It consists of a variety of impurities that increase the octane number, sulfur compounds, benzene, olefin, dirt, water, etc. In the process of combustion of gasoline, especially poor-quality, a large number of resinous sediments are formed, which are abundantly deposited in fuel highways, ramp, inside and outside the nozzles. Deposits on the nozzles are a black and brown lacquer, which is difficult and not soluble with gasoline.

Incorrect engine operation - a consequence of clogging itself injectors. The productivity is reduced in contaminated nozzles, the direction and the form of the torch spray is changed, in the launched cases, the nozzle needle can stick in an open or closed state.

Main interruptions become especially noticeable with the onset of cold season, since gasoline evaporation decreases, which makes it difficult to start the engine.

There are several ways to clean the injector.

The first, the easiest, but not the most successful preventive method - once every 5-6 thousand mileage kilometers pour into the benzobac a cleaning additive. The bottle of this means is designed for 60-80 liters. Fuel, worth a penny and sold in any auto shop. However, this method is conventionally suitable only for the prevention of injection pollution on new or only fitted cars. More often this method can only harm. The most unpleasant thing that could turn out is a solvent slag from a gas tank, a fuel filter and a benzoprovod will go into the ramp and nozzles. At the same time, the flakes of contaminants will score inlets of nylon filters injectors, which will necessarily disassemble. In addition, thick growths, almost covering the sprayer, such additives are not forces.

For a solid washing of the injector, there is another, very efficient and reliable way.

With the help of adapters to the ramp nozzles connect a special installation. At the same time, a fuel filter and a benz pipe is disconnected. Further, the engine starts up and 30-45 minutes operates on a flushing mixture, which is under pressure 3-6 atm. Served from installation. Similar mixtures are manufactured by many well-known manufacturers. We prefer well a proven Wynns.. The tool clears from deposits not only the nozzles with the ramp, as well as the valve and the combustion chamber. After washing the injector, candles change in mandatory. It is advisable to immediately drive a few kilometers in active mode to remove the remaining liquid from the system. In the overwhelming majority of cases, Wynns successfully copes with the task and the result is immediately felt. This method is good because with its effectiveness relatively inexpensive (on average 400 rubles per cylinder) and does not require dismantling ramps with nozzles, which is often time consuming and consolidated.

In particularly launched cases, the method of ultrasonic cleaning nozzles is used. They are removed, immersed in a special suspension and are exposed to ultrasound. In rare cases, it happens that the only exit becomes the replacement of nozzles to new ones.

Almost all car owners in our country faced the need. Most often she worries drivers while melting snow when operating the car is especially hard. Why there is an urgent need how to solve it yourself and what to use to get it best result It is worth considering now, before the arrival of the spring-summer period.

1 What is the need for washing the injector

The compositions of all brands of domestic gasoline include a huge number of diverse additives and impurities. Such components like benzene, olefin, water and sulfur are designed to raise an octane number. Often in gasoline can also be found such a substance as gas condensate. When using such compositions, it suffers, first of all, the engine of the car: harmful impurities are accumulated outside and inside the injector, in the fuel routes of the engine. Already within one minute, the thick layer of harmful savings is cleaned by the sprayer of the nozzle. If we speak the number of numbers - thin, 5 μm, the layer of hardened deposits impairs the bandwidth of the nozzle channels by 25%.

Absolutely every owner vehicle able to determine how it is time to wash the injector. To do this, it is worth paying attention to the following changes in the engine:

the engine power decreases;
it becomes harder to start the car, especially in the winter;
several times increases gasoline consumption;
the engine begins to work unstable. Especially good is noticeable at idle and transitions between the modes;
the car accelerates slower;
increases the toxicity of exhaust gases;
well noticeable "failures" during the warmed engine;
detonation arises.

All these factors clearly indicate that it is time to wash the car injector.

2 Why car owners choose Wynn "s

For washing the injector should be purchased quality cleaner. To do this, you can go a few ways. The first one is to buy an expensive Japanese agent for washing the injector, and the second is to buy an equally high-quality Belgian wynn cleaner "S for a much smaller price.

Vince's cleaner is in the world market for over 5 years. The main advantage of the products of the Belgian manufacturer before competitors is to use a number of strong solvents. Thanks to the competently selected composition, the cleaner Wynn "S. Literally after the first minute, entering the engine begins to actively dissolve the layers of impurities of any thickness. To the properties of purifiers Vince You can attribute:

vince cleaner cleans the injector, valve seat, pistons, piston rings, as well as a combustion chamber. For this there is no need to dismantle all these details;
flushing using Vince restores the parameters of torches spray nozzles and the optimal period of fuel intake;
Vince Ideally, the exhaust valves are perfect and prevents their further sticking;
treatment of the injector with a cleaner Vince eliminates detonation and improves engine start;
flushing makes it possible to significantly reduce fuel costs.

All these factors make cleaners Wynn "S. Leaders for sales worldwide. They can be successfully used to work with injectors on cars of all models. This is proven by millions of auto owners around the world.

3 Procedure for self-purification of the injector

Before proceeding with the washing of the injector with a cleaner Wynn "S.You need to get to the problem of the engine. All the work on dismantling is best described in such an algorithm:

We start the engine, after which I pull out the fuse, which is responsible for the operation of the fuel pump. Thus, we will remove the pressure in the fuel line;
Then disconnect the terminals from the nozzles, as well as reversing and gasoline feeding hoses;
Next, carefully dismantle the tablet with nozzles, as well as sealing rings.

After the work done, we have direct access to the car injector. Next, it is worth dealing with the principle of washing. It is to not give the nozzle to skip fluid when the electromagnetic valve is closed and vice versa.

To wash the injector, we need a cleaner Vince, as well as a device with which we can blow liquid Wynn "S. through the nozzle. In the role of such a device, you can use a plastic bottle. Connect it with a container in which the injected carburetor fluid is located, as well as with the inlet nozzle. As a result, we obtain an excellent device with which the flushing process will take a minimum of time. In addition, 2 rechargeable wires connecting with the nozzle terminals will also be useful.

Having all these accessories, we can proceed to the immediate washing of the injector. To do this, under pressure skip the cleaner Vince Through the nozzle, while alternately open and close the valve. Such a procedure must be performed until the nozzle is issued to the required spray fuel. If this does not happen, it means that the nozzle has failed and should be replaced. After that, it is necessary to rinse the injector with Vince again.

If there are well-distinguishable pollution layers on the injectors and on the walls of the injector, then Wynn's liquid is worth leaving inside the nozzles. Only in this way it will be possible to achieve complete cleaning of the injector.You can only stop the flushing when you see the shutdown seat seat and 6 pure nozzle holes. At the end of the washing using Vince All previously dismantled items must be collected in the reverse order.

Having finished flushing using Vinceand gathered all the details of the engine, it is worth waiting for a half hour, after which the engine will start. If you are all done correctly, the car will start the first time, will work much quieter, and the number of exhaust gases will become much smaller.

Having flushing the injector by a cleaner Wynns. At home, you will save a lot of time and a considerable amount of money. In return you will get stable work The engine is regardless of the operating modes and the transmission frequency, and the amount of gasoline used will noticeably decrease.