High-quality washing with "VINS" injector. What is the need for washing? Wynn's cleaner - high-quality washing of the injector with a guarantee how to use Wince Vince Injectors

Quite often, the owners of the car face the need for carrying out this is especially noticeable during the periods of snow and summer. When the surrounding conditions force the system of the machine to work at elevated loads, the injector clogs faster.

In order for the cleaning process to occur quickly and efficiently, car enthusiasts apply special means. One of the most popular methods in this field is washing the "VINS" injector. It can be performed on a hundred, but if you wish, all actions can be implemented on your own. To do this, you must use the instructions for the use of the product. Understand the principle of flushing will also help the advice of professional carcases and ordinary users.

Why need cleaning

Gasoline, which today is used as a fuel for the car, contains additional additives in various ratios, impurities. They improve the operation of the engine, increase the octane number.

Over time, all these impurities are settled on the engine parts. This is particularly acutely affected by the bandwidth of the fuel tract. Injector also suffers. The deposits accumulate both outside and inside it.

Often to eliminate the film from the axial particles of fuel impurities, such a means like "VINS" is used. Gives high results. The throughput of fuel channels increases to 25%. The engine works fully and efficiently. Flushing prolongs its service life if all actions are made correctly.

Signs of clogging

In some cases, the car driver can independently determine what is necessary for washing with the "VINS" injector. To do this, pay attention to the operation of the engine system. First of all, its power is reduced. This increases fuel consumption. Machine becomes harder. This is especially clearly noticeable in the winter.

Among other things, the engine work becomes unstable. This can be noticed at idle or when changing the mode. To fully accelerate, you have to spend more time. This increases toxic characteristics. exhaust gases. The failures can also be felt when the engine is in a preheated state. Maybe even detonation. If the listed features of the work are determined by driving a car, it is possible that the injector washed required.

Reviews of washing "Vince"

For many years, the washing of the VINS injector is very popular among motorists. Expert and regular user reviews make it possible to conclude a high efficiency of the means. It has the optimal value ratio and quality. In the chemical market for washing, many products of world brands are presented. The competitor of the Belgian agent for Injectors "Vince" is Japanese similar products. It has the same qualities, but its value is much higher.

Experts argue that the composition of the Belgian agent includes a large number of solvents various levels. Their balanced composition allows washing to quickly begin dissolve the layers of almost any thickness.

Product Properties

What does the washing of the injector give? "Vince" (Wynns) is a product that has a specific set of characteristics. They must be taken into account before cleaning the engine systems. Details in the process of working do not need to be dismantled. "Vince" successfully fights the traces of the injector injector, as well as pistons, valves, piston rings. The combustion chamber is also quite efficiently cleaned.

After the procedure, the characteristics of the functioning of the torches spray nozzles are restored. In this case, the gasoline intake period is optimized. It can be done due to the washing of exhaust valves. In the future, their sticking is preventing. Detonation is eliminated and the quality of the engine startup is enhanced. All these properties contribute to a decrease in fuel consumption. Therefore, the presented tool holds leading positions in the market automotive chemistry for many years. This is a world-famous product brand.

Instructions for working

To implement all actions yourself, it is necessary to own the applying technique "VINS". Washing the injector, the instruction of which is quite simple, perform in stages.

First you need to get to the processing zone, where the engine has problems. Motor dismantling is also made in a certain sequence. First you need to start it and get a fuse. It is responsible for the functioning of the pump. In this case, the pressure in the system falls.

After that, terminals are disconnected from the nozzles. Also disconnect the injection, reversing hoses responsible for fuel supply. Planet nozzles and sealing rings are very neatly dismantled. After the actions performed, you can easily reach the injector. Next is done directly washing.

The main stage of the work

Washing injector "Vins", the instructions for the use of which is used by motorists for a long time, is quite simple. To get started, it is necessary to prepare a device that allows you to easily drive the remedy through the nozzles. For this, a plastic bottle is quite suitable. It is connected to the tank of the injection fluid of the carburetor and the inlet of the nozzle.

Next, you will need to apply 2 wires from the battery. They are connected to the nozzle terminals. Then there is a flushing directly. Under pressure, the agent is passed through the nozzle. It is necessary in the process of this action alternately open and close the valve.

The procedure is performed until the required spray gasoline is obtained. If this does not happen, you will have to replace the nozzle. So, this detail failed. After the first washing, the procedure is performed again.

Completion of work

After the fluid for washing the "Vince" injector has passed through the system 2 times, the layers of contaminants should completely disappear. If this did not happen, the remedy should be left inside the injectors for a while. This will allow you to completely get rid of deposits harmful to the engine and completely clean the injector.

Work is stopped when the shutdown valve seat is visible, as well as 6 purified holes at the nozzle. The assembly is made in the reverse order. To do this, when disassembling it is necessary to remember all stages of work. If some action fails to be remembered, you must use the instructions for disassembling the car's motor. So perform all manipulations in reverse order It will be much easier.

Engine starting

After the washing with "VINS" the injector is completed, it is necessary to make the first start of the engine. To do this, wait 30 minutes after completing the assembly of all parts. If all actions were made correctly, the motor will start the first time. His work will be significantly different. The engine will function much quieter. This reduces the number of exhaust gases.

The flushing at this stage is considered complete. The owner of the car in the implementation of all actions independently saves its means and time. The engine will function steadily. This will not even affect the modes of its operation and the transmission frequency. As a result, fuel consumption is significantly reduced. Therefore, the periodic washing of the injector is simply necessary. Having certain skills for servicing the car systems, as well as desire and free time, all actions will quite easily perform independently.

Should I contact the car service?

Applying a tool for washing the "Vince" injector, it is possible to achieve good results. But many motorists have a question about the feasibility of carrying out all actions on their own. In some cases, really visits a hundred avoiding. But most often good results can be achieved when performing a car maintenance.

If the car owner has the ability to wash the injector independently, it will be better to apply special diagnostic devices. The autoskner will allow you to control the system of the machine and through the smartphone to convey information to the user. It is very convenient and saves a huge amount of family budget funds.

However, if there are strong contaminants or in very launched cases, the washing is carried out only by specialists. In this case, special equipment or other cleaning principles may be required.

Injector processing per hundred

Washing "VINS" the injector is not always appropriate at home. Sometimes without the help of specialists just can not do. It will cost much more expensive, but it happens that only complete diagnosis and integrated service will return the effectiveness of the operation of the car systems. Also, the STR provides a guarantee for work produced. It is also important for auto owners.

Sometimes not only an injector, but everything requires a thorough flushing. If the electroclaps are strongly stuck, you should contact the specialists. Perhaps cleaning these parts will be made using ultrasound. Special system allows you to check the operation of the nozzles outside the car.

The measuring technique owned by the service station allows you to estimate the intensity of spraying. Therefore, if the washing of the injector was not carried out very long, and the nagar layer is very large, it is better to apply special technique. Let this procedure be more expensive, but only it can return the capacity of the car.

Many owners of injection cars know how unpleasant, irritably, when your iron horse begins to behave suspiciously. At first, these minor troubles appear when the engine is idling at idle. Such work idle move accompanied by unstable work The engine is heard arbitrary cotton. The intensive set of revolutions falls, and the fuel simply disappears. But you continue to ride. And the washing of the injector quickly corrected the shortcomings of the motor.

After some time, the steel heart simply intends to jump out from under the hood of your car. This condition of the car is completely unacceptable. The reason for this, first of all, can serve - the appearance of certain substances in the fuel system that impede the normal operation of the engine. Remove these contaminations will help equipment for washing the injector. And use chemicals Wynns (Vince), Lavr - Clean the entire system fully.

Other possible problems of system malfunction should be excluded: Fuel pump, filter, fuel grid. These faulty (clogged) elements can also be the cause of engine illness. Specialists are recommended to carry out prevention. fuel system 30-40 thousand km.

Injector clogging

All foreign bodies and substances (insoluble in gasoline) that can get inside the gas tank of your car - easily stops the fuel filter and other technical devices (grids). But the fact that then happens with fuel, directly inside the nozzles, ramps and the engine itself - the lack of fuel production technology. Gasoline or diesel fuel consists of substances that are crystallized when heated. What leads to the formation of slags in the fuel supply elements.

Independent injector cleaning

Perfectly fighting with all sorts of insoluble deposits - Wynns, Laurel and cleaners like them. Consider the situation - flushing the injector with your own hands. You will need a set of common spare parts. How much is it all? Cheaper than doing on the service, and the set will remain with you. And can be used more than once!

Set of sought-after parts:

• fuel conductive hose (1.5 m);
• injector filter (1 piece);
• clamps (4 pieces);
• wheel nipples (2 pieces);
• plastic bottle (1.5 l);
• automobile compressor;
• fluid for washing (Wynns, LavR).

Mount the system for the likeness of the dropper, which is posed. The hose is cut into two parts in such a way that one end is connected to the fuel ramp, and the other to the injection filter. The second half of the fuel hose connects the filter input with the bottom of the plastic bottle (to the nipple). Drill the plastic bottle cover and bottom. We install in both nipple holes. From the nipple, which is mounted on the bottom of the bottle, unscrew the nipple. All connections are tightened by clamps.

How to rinse the injector yourself? Washing the injector does not require special skills. An alternate sequence of actions should be performed. Here is a strict ordered set of actions to perform repair and restoration work (cleaning the WynNS) of the injection system with your own hands.

1. Operate the fuel tank cover for pressure relief. Remove fuse fuel pump.
2. Disconnect the fuel supply hose from the fuel ramp. If there is a return - disconnect it and close the output with a bolt. Connect to the ramp my own-made system (fix the clamp).
3. Eggplant fill with VINS or LAVR liquid (0.5 l). Hovering a bottle for hood hook (torn up). Connect the compressor to the nipple of the neck bottle. We give 2.5-3 atmospheres. Next, support these numbers.
4. We start the car. The engine operates at idle to complete fluid generation (Wynns, Laurel) until the motor itself stalls. Follow the compressor pressure gauge and keep pressure.
5. Motor stall. Give a rest to him for 30 minutes, while keeping the pressure. After 30 minutes, we discard the pressure. Top the remaining 0.5 liters of Vince or Lavra. Create pressure compressor. We start.
6. The engine operation at this stage must be accompanied by a periodic increase in revolutions. Click it is reasonable to the accelerator pedal, how much does the motor allow. Follow the manometer to the full flow of flushing fluid.

Vince ran out and the motor became. We reconnect everything as it was a wound. Perhaps it will be needed to replace the oil and a new set of candles. We bring the car and go ride. It is enough to drive a test 30 km to sense the improvement of the engine.

Acceptable liquids

Choose a cleaning agent is easy. Wynns, Lavra - they really cope with their task. Be sure to see the annotation of detergents. Are they suitable for your car.

Vince is a rather powerful tool that is able to disperse all the slags, which accumulated in the ramp, electroclap. But it does not prevent the replacement of sealing rings on the nozzles. Lavra is a similar means, but it is more expensive.

Injector washing service

Car service is provided with a washing of the injector. The device for washing the injector will suit any, it is not so basically as the qualification of the performer itself. The result is important to you. Of course, the service station will carry out more detailed service with a possible follow-up warranty. But do not forget how much such services will cost. Especially if your car travels a lot, it will take at least the prevention of the entire system with the use of Vince.

It will be relevant to take advantage of the technical service of the bus station, if the electroclap is very stubble. The ultrasonic installation for washing the injector is able to free from the baked dirt. To do this, removed from the fuel system a set of nozzles - amenable to ultrasound processing. After that, the operation of the nozzles is checked on the stand. The torch of spraying, intensity is taken into account. A STR can also offer an imbalable service - washing the injector.

Equipment for washing the injector is not significantly different from our proposed scheme. It is worth such a service much more than - to make himself. It is worth saying about the existence of various other cleaning methods. But they are less popular, as they have side effects. It is not recommended to pour chemicals like Vince, Laurel in the benzobac. Such an action can raise all the evil, which will go to the fuel system.

Remember dear motorists! The washing of the injector refers to such a procedure that can protect you from expensive purchase. A set of nozzles - an inadessive pleasure. The injection washing fluid should be selected with full accordance with operational requirements Fuel distribution systems of your car.

Well no

Injectors in injection systems serve to supply fuel and further mixing it with air to form the fuel and air mixture.

With the effective operation of the injector and in the conditions of using pure high-quality fuel, there should be no problems with sprayers. But this is only the theory, because in practice, fuel often contains many impurities that fall from the tank into the nozzles, climb them and do not give normally to perform their functions.

In this regard, there is a periodic need for cleaning the injector and the injectors themselves, in particular. There are several ways to get rid of pollution, but most often car owners rely on special fluids.

It should be understood in their effectiveness and benefits, as well as determine which purifier for the injector to the tank is better and what to pay attention to the use of auto chemicals.

Methods for cleaning the injector

Before submitting directly the rating of popular and relevant injector cleaners for the car, you need to consider all available methods for restoring the workability of the node.

It should be understood that far from all cases should be relying exclusively on auto chemicals. There are situations where it does not help, and will not fully return the fuel supply system to the original state.

Therefore, even the best cleaner for the car injector may not work with severe pollution. In such a situation, you will have to act more dramatically and seek help from specialists.

To restore the performance of the injector injector, can be cleaned in the following ways.

1. With the help of special cleaning additives. They poured into the fuel tank. Such funds are actively sold at any automotive goods store. Usually one bottle is enough for 40-60 liters of fuel, that is, it is necessary to pour it into full tank. But the nuances of the application depend on the specific manufacturer. Use additives extremely simple. They are mixed with fuel, and further pass through the entire fuel system, passing the nozzles from the formed by car and sediments. Additives are easy to use and affordable. But it is important to take into account that dirt in the fuel tank contributes to the clogging of the filter thin cleaning. Plus, a large number of fakes of products of famous brands are being implemented on the market.
2. Use special installations. Depending on the equipment itself, the injector cleaning is carried out with the removal of nozzles and without. If the elements are dismantled, then they are connected to the ramp. When cleaning without dismantling, the system is poured special fluidwhich circulates through the system. The price of the service is quite adequate. And if used quality equipment And good cleaning products, the result is excellent.
3. The use of an ultrasonic cleaning system. The most expensive, but also the most effective option to restore the health of the injector. Here do not apply cleaning products. Ultrasound is relevant for situations where the nozzles are strongly contaminated and other methods do not help.

Leading automakers are recommended to carry out prophylactic cleaning with any suitable automobile owner. And to do it costs approximately every 20-25 thousand kilometers, regardless of which current state is the fuel assembly.

It is especially important to engage in prevention in the case of cars where the distribution injection is used. The presence of a single nozzle with one nozzle simplifies the task of its independent cleaning, but does not cancel the need for prophylaxis.

Rating of the best tools

Motorists are fairly interested in what fluid washing will be really better for the injector and which is preferable to choose for such purposes.

The product range is currently extensive that somewhat complicates the tasks of choosing a good injector cleaner.

It is difficult to unambiguously say that this or that liquid for washing the nozzles is the best, since there are a number of products that meet the requirements of motorists in terms of quality and efficiency.

In order to simplify the choice, we suggest familiarizing yourself with the list of drugs that have passed the tests and showed excellent results as part of testing. You can rely on this rating to those who find it difficult to choose one option among existing nozzle cleaners. And the funds falling into the top are suitable for gasoline and diesel engines.

Separately, consider a list of decent analogues, which still have not entered the leading group. Additionally, we will offer a mini-rating of diesel cleaners for nozzles suitable for cleaning injector systems of motors working on diesel.

The leader's list includes the development of the following manufacturers:

• Wynns.
• Lavr.
• Autoplus.
• Liqui Moly..
• Kerry.
• COMMA.
• Hi-Gear.

Each product will be considered separately, which will allow consumers to make their own conclusions and make a decision on how much the liquid is better to periodically wash their scored nozzles, or just started to show signs of clogging fuel sprayers.

Formula Injector firms Hi-Gear

Many motorists believe that it is this means for cleaning the automotive injector the best, and recommend pouring it into a tank to obtain a quick and high-quality effect.

The product is positioned as a quick-action cleaner. According to the instructions, the substance is poured into the fuel tank. Standard container almost 1 liter is enough for 3 flushing in relation to passenger car And for 2 on.

The disadvantage of the tools can be called the container itself, because there are no dimensional marks here. It is necessary to separately take a measuring container to accurately pour the recommended quantity.

Tests showed high efficiency of combating resinous sediments. All pollution was well removed, so the substance can cope with the favorite types of clogging of the nozzles. It can be said that this is an aggressive cleaner with excellent detergent.

Petrol Magic from COMMA

The brand may not be the most recognizable, if compared with the same Hi-Gear, but the effectiveness of the drug is high, which has been proven repeated tests. This may not be the best tool used to clean the nozzles, but demonstrates decent results.

The substance is a concentrated additive used by purely for gasoline engines with injection and carburetor systems. This is a long-acting additive, and one bottle of capacity is 400 ml. Fills in a full tank of 60 liters.

According to test results, it can be said that about 30% of COMMA deposits removes from the nozzles and has a rather mild effect. This tool is better to use as a preventive measure, maintaining the performance and efficiency of the injector with it.

KR315 made by Kerry.

The well-known product for cleaning fuel systems where fuel injection is used. Displays itself as a very effective purifier injectors, dissolving resins and other types of deposits.

The means itself is made in the form of a concentrated liquid fill in the tank. One bottle is enough for 50-60 liters of fuel. Capacity contains 355 milliliters.

Some motorists with a certain distrust relate to the additive due to its low cost. But this is a normal price, because we are talking about additive domestic producerwhich needs to be imposed on the struggle with imported analogues.

According to the results of Kerry tests, over 60% of pollution is laundered. Moreover, the drug clearly showed the ability to remove even persistent and complex sediments.

Fuel Injector Cleaner from STP

Another worthy product deserved to the leaderboard. This is a superconcentrate designed for injection systems. It is recommended a manufacturer for regular use to clean, and further maintain the fuel injection system in the purity.

Applied additive is extremely simple. It must be pouring into the fuel tank, observing certain proportions. Capacity contains 364 millilita tools, but they are designed for 75 liters of fuel. That is, with a smaller tank, you will have to measure the right amount. It is not recommended to fill the full bottle of 50-60 liters. The manufacturer itself requires to use its additive immediately before refueling so that the tool can be evenly engaged in fuel.

Check showed high washing characteristicsTherefore, experts include the cleaner to the category of rigid. It easily removes even complex sediments. But with a large number of pollution in the tank, it is worth using a matter with caution, otherwise there is a risk to face the replacement of a fine cleaning filter.

INTENSIVE CLEANER FROM LIQUI MOLY

An interesting and efficient drug from the leading manufacturer of automotive chemistry. Suitable for carburetor and injection engines.

An important feature of the means is that it is recommended to use special installations to use it. This is a concentrate that requires gasoline dilution. In many ways, the result of washing depends on the quality of the fuel itself.

One bottle with a volume of 500 ml. Enough for cooking 4.5 liters of solution. The fuel system is washed with a certain amount of finished liquid based on fuel and additives. The standard 950 ml is required to the standard small-grade engine of 1.5 liters. Solid.

Testing showed excellent results on cleaning even complex and sustainable contaminants. After the first washing, it was possible to get rid of about 80% of deposits, and the remaining 20% \u200b\u200bsoftened well.

ML 101 from Lavr

The full name sounds like Injection System Purge. Allows an imbalance method to clean the injection system with a power unit running.

Like the previous remedy, this additive should be used in the presence of special flushing equipment. That is, you will have to contact the car service.

Check shows the ability to get rid of about 70% of deposits after the first application. Good results with an adequate price. Hence the popularity among consumers, despite the relatively recent appearance on the market.

PETROL INJECTION CLEANER FROM AUTOPLUS

The means of a non-aggressive nature of the impact designed to work with gasoline fuel systems. It can cope with organic and inorganic sediments.

Here, also a prerequisite for use is the presence of specialized equipment in the form of washing installations. Capacity for 250 ml. Before use, mixed in proportions 1 to 3 with pure gasoline, after which they are poured into the installation.

Testing has proven excellent additive efficiency capable of removing up to 70% deposits at the first application.

To achieve maximum result, be sure when mixing with fuel use. It directly affects the cleaning of the injector.

INJECTION SYSTEM PURGE WYNNS

It is often positioned as the best car cleaner for contaminated injector nozzles. The additive really deserves the laudatory feedback.

This drug requires a flushing installation that will allow without removing the nozzles to rinse the system. Shows decent results. Although after use, up to 10% of implanable deposits may remain.

Washing ability on a really decent high level. Although the leadership in the Wynns development rating is unlikely to be correct.

Decent Analogs

In addition to the presented drugs, it is worth noting several more really interesting and high-quality developments. Let them not fall into the previous rating of cleaners intended for the car injector, but this does not prevent them from remaining among the priority options. Their use for injection machines gives positive effects.

Briefly imagine the development that you should try:

• ABRO IC509. This is a complex cleaner in 354 ml containers. One bottle is simply poured into the fuel tank with a volume of 70 liters.
• D4 Injector Cleaner under the Toyota brand. Can be used not only on cars japanese brand. The level of efficiency is medium, but this additive is one of the best on the market as a preventive body.
• Master Injector Cleaner from RVS. A worthy version of the nozzle purifier, parallel to the composition of the fuel itself. Level Efficiency can be described as medium.
• Carbon Cleaner. Decent cleansing fluid at low cost. Effectiveness even if it is not exemplary, but your money justifies to the fullest. Good use for prevention.
• Verylube XB40152 from XADO. Ukrainian development high level Quality. A comprehensive solution for protecting the injectors and cleaning the fuel system, spark plugs, etc. The means is implemented in a tube with a capacity of only 10 ml. It is added simply into the fuel tank. With serious contaminants, 1 vial is 20 liters of gasoline, and for prophylaxis mixed with 50 liters of fuel.
• RW3018 from Runway. The cleaner copes with contaminants on the nozzles, the walls of cylinders and the ignition candle. The effectiveness is average, but also the price is available. Used by fill in the fuel tank.
• SP3211 from Stepup. Not the most famous cleaner, in many respects resembling the previous option. Completely opposes pollution. It is best to manifest itself as a preventive agent.
• Injector Cleaner from Mannol. Additive for fuel that should be poured before refueling. Another decent comprehensive cleaner intended for the nozzles and the entire fuel system. It is recommended to use for prophylaxis. One container by 300 ml. Designed for mixing with 30 liters of fuel.

List of cleaners for injectors can be listed for a long time. But if you are interested in really high-quality and proven solutions, then push out earlier ratings and lists.

All these substances were tested, tested in real conditions. About them gathered feedback from ordinary motorists, as well as experts. One can say one thing that such liquids really work and benefit. Just use them need to be destined and strictly according to the manufacturer's recommendations.

Fluids for diesel systems

It is worth considering several tools that are oriented strictly to diesel power plants. Although many products presented earlier are positioned as cleaners for gasoline and diesel systemsThat is, they are characterized by a certain versatility, specialized fluids use preferable.

Like gasoline fuel systems, diesel motors Also, over time polluted. Different trash accumulates inside, deposits remain on fuel sprayers. Periodic cleaning will allow you to keep the system clean, as well as prevent serious consequences from pollution.

You can select several cleaners whose action is directed to work with diesel nozzles.

• Jet Cleaner Diesel. From the domestic manufacturer LAVR, which has become a worthy answer for foreign analogues. Well brushes diesel injectors and parallel cleans the injection system. Does not lead to clogging of mud sprayers from fuel tankProtects from clogging filters and fueling. Low price I. high degree Efficiency make Lavr. worthy choice For owners of diesel cars.
• Diesel Spulung. This tool produces Liqui Moly. Positioned as a cleaner for diesel nozzles. It perfectly copes with pollution and deposits in pistons, nozzles and combustion chamber. It helps to increase the cetane number of diesel. One bottle is designed for 75 liters of fuel. It is officially recommended for use by BMW for its diesel engines.
• Diesel System Purge made by Wynns. Washing agent from a proven manufacturer. Prolongs service life squeeze filter, normalizes idling work. Has many positive feedback, It is used to impairly clean the engine.
• Jet Cleaner from Hi-Gear. High-quality diesel injector cleaner, perfectly coping with resinous species. It does not allow to form in the cylindrophone group, protects plungers from wear. Does not harm the catalyst and turbocharger.
• ML102 from Lavr. Another domestic product with a cutting effect. Consumers celebrate excellent performance indicators. It is well suited and as a cleaner for the fuel pump.

In addition to the use of high-quality and proven fluid, it is important to understand the large value of additional factors that directly affect the final efficiency of the flushing operation.

Therefore, it is worth considering the current state of the nozzles themselves, the level of pollution of the fuel tank, the presence of a certain amount of sediments and dirt in the motor. If the engine is seriously worn out, it has not been cleaned for a long time and never even passed the procedure for preventive cleaning, do not expect from one instant miracle bottle. Even when it is the most expensive and highly efficient additive.

With a moderate level of pollution, you can, which are designed to fill into the fuel tank. Such drugs perfectly show themselves in the fight against deposits in the early stages and as a prophylactic agent. With more serious problems, it is better to take fluids from the category to connect to the fuel ramp using special equipment. In critical situations only ultrasound cleaning will help. And for this will have to seek help from specialists.

for gasoline engines

Wynn "S INJECTION SYSTEM PURGE Cleaning agent for removing dirt and deposits in gasoline injection systems without disassembly.

• Cleans valves, injectors, combustion chambers and other parts of the fuel system of the gasoline engine without dismantling components.
• Restores spray nozzles.
• Improves the ratio of the balance of cylinder compression.
• Frequent adhesive exhaust valves.
• Improves the balance ratio of air fuel mixes.
• Restores the injection time to the initial value.
• Restores good engine performance.
• Eliminates problems with spontaneous engine stop, uneven idle turns, as well as poor engine performance caused by contamination of the fuel system.
• Reduces the toxicity of exhaust gases (CO and HC).
• Safe for spark plugs and the entire exhaust system.

Applicability

Can be used on all fuel systems gasoline engines such as - carburetor, permanent injection, multi-injection, mono-injection, direct injection (GDI, FSI, ...).
It is recommended to clean every 20,000 - 30.000 km or when problems occur: non-permanent idol, poor pickup or dirty.

Note

Wynn "S INJECTION SYSTEM PURGE for professional use.
Apply only using FuelServe installations.
Treatment time for optimal result: 30 - 60 min. (Instructions for use-, see the instructions for use on Wynn equipment "S).

Packing

No. W76695 - 12x1 liters. - EN / FR / DE / NL / ES / IT / RU / PL / PT

NOTE

Do not add to the fuel tank.

Features

Professional Series

All new and used cars are sensitive to fuel quality, chemical additives have been developed to obtain the optimal engine power and comfortable driving company WYNN'S. Modern fuel systems have a very accurate setting, and therefore they are very sensitive to various kinds of negative impacts from chemical reactions occurring in fuel. This leads to clogging the fuel system, poor lubricant, corrosion and other problems. On used cars, problems arise to obtain the right fuel mixture (air / fuel ratio) and its combustion efficiency. This is due to the accumulation of deposits in the fuel system and wear of parts.

Related products

Professional Series

Wynn "S Petrol Extreme Cleaner (Petrol Clean 3) is a chemical additive for gasoline engines, provides a powerful cleaning of the fuel system of gasoline engines as a result of a single fill of the product. Quickly cleans and protects the injectors, restores and maintains the optimal mode of the fuel mixture in the combustion chamber.

The aircraft engine cleaner of the gasoline engine is an extremely powerful means for cleaning and removing soot and other contaminants. These sediments and dirt reduce air intake, worsen the operation of the exhaust gas recirculation valve (EGR), lambda sensors come into disrepair. All this leads to ineffective combustion, uneven idlingIn some cases, the engine spontaneously stalls.

Wynn's Catalytic Converter & Oxygen Sensor Cleaner- Chemical Additive for Gasoline and hybrid engines, optimizes the efficiency of catalytic neutralizers and ensures optimal lambda (oxygen) sensors.

The question of than rinse the nozzles Often concerns both car owners with gasoline and diesel engines. Indeed, during operation, they naturally pollute. Currently, there are popular nozzles cleaning tools from Nagara - Lavr (Laurel) ML 101 Injection System Purge, Wynn's Injection System Purge, Liqui Moly Fuel System Intensive Cleaner and some others. In addition, there are three ways to clean, which affect whether to dismantle the nozzles or can be cleaned without removing. It is the quality of cleaning and purpose that the injection cleaning fluid (the so-called Injector Cleaner) will be distinguished.

Methods for cleaning injectors

Among the variety of funds, the better to clean the nozzles, there are two types that will be designed for one of the main methods of their cleaning, since different cleaning compositions will be required. So, methods include:

Depending on which method is planned to be cleaned, the tool is selected than to clean the nozzles. Therefore, they are also divided into classes.

Most modern automakers are recommended to clean the nozzles at least than every 20,000 mileage kilometers, regardless of their condition.

Such reasoning is valid for both cars with modern distributed injection, and with more old system - Monovpromsky, where only one nozzle is used. Although in the latter case, clean it easier.

Popular fund rating

In ordinary outlets and online stores you can currently find many different, as well-known and not very, tools for cleaning nozzles. But most of them have contradictory reviews and tests about efficiency. We tried as objectively to estimate the nozzles cleaners and made up a rating based on positive and negative reviews real car ownerswho used or tested these compositions in different time. The rating is not a commercial nature, so what a means to choose is to solve exclusively.

The tool is positioned by the manufacturer as a cleaner of the elements of the fuel system of gasoline engines, including the injector. As in the previous case, the washing with the Winx means is performed on the cleansing installation, but any manufacturer is already. Procedure Standard, it is necessary to disconnect the highway and fuel tank, and clean the injector nozzles by installing engine runningsince the cleaning of the Yejector Vince removes the Nagar not by washing, but by burning!

The manufacturer declares that the cleaning agent besides its immediate functions also purifies the inlet path, the distribution fuel line, the fuel pressure regulator and pipelines from harmful deposits. In addition, the remedy has a cutting effect. Please note that the liquid is quite aggressive, so when connected, you need to use the hoses resistant to aggressive elements, and the detergent installation must be connected directly to the frame, excluding rubber fuel hoses from the system.

Real tests showed a sufficiently high efficiency of its use. The engine, even with a mileage of 200 thousand km, show the best dynamics and get rid of the failures when set of revolutions. In general, reviews about the cleaning agent "Vince" are mainly positive.

WYNN'S INJECTION SYSTEM PURGE facility is packaged in one liter canister. Article of goods - W76695. And the price of the above period is about 630 rubles.

This cleansing agent can be used to clean the gasoline carburetor and injection engines (including monofry). In accordance with the description, the composition removes deposits from nozzles, fuel ramp, highway, and also removes the nagar from the valves, candles, and from the combustion chamber. Please note that the liquida moth for cleaning the nozzles is sold in the form of a concentrate, in a 500 ml balloon. This volume is necessary breed gasoline, preferably high-octane and high-qualityFrom the last factor, cleaning efficiency is very dependent.

To mentioned 500 ml of concentrate, add 4 ... 4.5 liters of gasoline to get about 5 liters of finished cleaning composition. To wash the engine with a volume of 1500 cubic centimeters, approximately 700 ... 800 grams of the finished liquid. That is, to obtain this volume you need to mix about 100 grams of concentrate and 700 grams of gasoline. The cleaning mixture is used in a special flushing installation for washing nozzles on the ramp. This specifies the installation of type Liqui Moly Jet Clean Plus or other similar equipment.

Real tests showed very good applications. So, with nozzles you can wash up to 80% of resinous sediments, and the remaining contamination is very softened, and during the engine operation can be deleted independently. If you wash the nozzle for a long time (for example, up to three hours), you can achieve its complete cleansing. Therefore, the remedy is unequivocally recommended for purchase.

It is implemented in two volumes. The first is 5 liters, the second is 1 liter. Accordingly, their articles are 5151 and 3941. And the price is 5,400 rubles and 700 rubles.

Fuel system cleaner for SUPROTEC gasoline engines

Purifier of the fuel system "Suprek" domestic production The right is very popular with car enthusiasts. This is due to its high efficiency, in particular, high-quality cleaning both cold and hot engines. This became possible due to its balanced composition, which includes appropriate substances, including additional oxygenates, which ensure an increase in oxygen content in the combustable gasoline. And this positively affects the combustion of fuel at high temperaturesThat is, high-temperature cleaning of the fuel system elements. At the same time, there are no harmful components, such as methanol, metals, benzene and others. Accordingly, the value octane number Not comes out for the permissible limits. In addition, with the load on the engine, the cleaner is able to reduce the fuel consumption of approximately 3.5 ... 4%, and in idle mode - up to 7 ... 8%. IN exhaust gases The content of residual hydrocarbons is significantly reduced, the presence of which indicates the degree of contamination of the engine.

Real tests showed quite good efficiency. In particular, when moving at a low speed (the first-second transmission and medium engine speed), the SUPROTEC fuel system cleaner ensures the smoothness of the course without twigs and jerks. However, it is worth noting that the overall state of the fuel system as a whole and its individual elements also affect the behavior of the machine. For example, you need to check the condition fuel filter. Therefore, the cleaner is uniquely recommended for buying all owners of cars with a gasoline engine on the fuel of any brand.

It is realized in a cylinder with a volume of 250 ml. According to the instructions of one cylinder, enough for breeding in 20 liters of gasoline. Article of such a package - 120987. Its price for the above period is about 460 rubles.

One of the most popular funds in the domestic market. Independent tests have shown that the additive is capable of laundering to 70% of Nagar on the nozzle (depends on its condition and old age). To use this liquid for washing injectors, a special installation of LavR LT Pneumo is needed. Accordingly, to use the means you need to look for a hundred, where there is this equipment, or buy it for yourself, or make such an installation yourself (unlike the usual, you need to do so in a container with cleaning fluid to connect a compressor to create a working pressure).

Lavr 101 not only cleans the nozzles well, but also reduces fuel consumption, oil, and also provides easy start in the cold season, increases the overall engine resource. Real tests have shown that the remedy effectively cleans the nozzles, so it has gained wide popularity, both in ordinary car owners and workers of car services engaged in cleaning nozzles.

The LAVR ML 101 Injection System Purge cleaner is implemented in a package of one liter. It has the article - LN2001. The price of equipment for cleaning nozzles as of summer 2018 is about 560 rubles.

This cleaning liquid for washing the nozzles is different from the previous ones that it must be poured into the fuel tank. The manufacturer reports that even one application is enough to remove the nagar on the injector. In addition, the additive ensures the lubricant of the needle valve of the injector, prevents it from freezing, extends the service life of the injectors several times, eliminates the detonation (the so-called "knock of the fingers"), prevents the formation of deposits on the inlet valves and in the combustion chamber.

As for use, one vial of 295 ml is enough to clean the fuel system of the engine with a volume of up to 2500 cubic centimeters. Pump preferably in a complete tank of fuel. There is also a large packing of 946 ml. It is designed for three cleaning engines passenger cars or two cleaning of truck engines.

Real tests of the use of means for cleaning the nozzle "High-gir" showed it quite high efficiency. It was noticed that its composition is quite aggressive, therefore it fights well with resinous sediments on the elements of the fuel system. As the manufacturer assures, one cycle can be completely getting rid of resinous sediments.

The most frequently purchased packaging has a volume of 295 ml. Its articula - HG3215. The price of such packaging is about 400 rubles.

Another popular means - Kerry KR-315 is also poured into the fuel tank and mixed with flammable. Packs into vials of 335 ml, the contents of which you need to add to 50 liters of gasoline (if the volume of the tank of your machine is slightly smaller, then you need to pour out all the contents). In accordance with the description, the additive clears injectors, dissolves sediments and resin, reduces uneven operation of the engine, improves performance features and reduces fuel consumption, protects the fuel system from corrosion and moisture. Interestingly, the remedy does not harm catalytic neutralizers. The great advantage of Kerry KR-315 is its low price.

Real tests of the cleansing means have shown that it can be eliminated from more than 60% of pollution, including resinous and heavy. If you perform a re-sink, then there is a chance that the nozzle and other elements of the fuel system are completely cleaned. Therefore, despite the low price, the tool works quite effectively, and is uniquely recommended for the purchase of car owners with a gasoline engine and injection system.

As mentioned above, the volume of packaging is 335 ml. Article of the bottle - KR315. The average price of such a package is about 90 rubles.

Please note that the use of one or another cleansing agent largely depends not only on its composition, and therefore efficiency, but also on the engine of the engine, fuel system, nozzles, the quality of gasoline used, the mileage of the machine and other factors. Therefore, different car enthusiasts after using the same means the result may differ.

However, out general recommendations It can be noted that additives poured into fuel is better to use with qualitative gasoline. The fact is that poor-quality fuel has little oxygen in its composition, therefore adding the composition to it, which requires extra oxygen to work detail for the engine. This is usually expressed in its unstable work.

Also, after the fill of the cleansing additive, it is better to ride at high turns in order to combine chemical and temperature cleaning. It is best to ride on large speed somewhere outside the city. The effect of using the additive is felt, as a rule, only after all the fuel in the tank was used (it must be complete). But watches that before completion you managed to get to refueling (or you can carry a canister with gasoline with you in the trunk).

If you had any experience of using listed or any other nozzle cleaning tools - share your opinion in the comments.

Other similar nozzle cleaners

As mentioned above, the injectors cleaners market are sufficiently saturated, and in the previous section only the most popular of them were listed. However, there are other, no less effective, which are presented below.

Auto Plus Petrol Injection Cleaner. The tool is intended for poured into cleansing installations (for example, Auto Plus M7 or similar). Please note that a concentrate is sold in a bottle to be diluted with respect to 1: 3 with good high-octane gasoline (the quality of future cleaning depends on it). In general, the additive shows good results for cleaning the nozzles.

STP SUPER CONCENTRATED FUEL INJECTOR CLEANER. This agent must be added to the fuel tank. It is realized in a bottle of 364 ml, which is designed for 75 liters of gasoline. If you pour fuel less, then the number of additives must be calculated by the proportion. Please note that this additive is undesirable to use on vehicles with a strongly contaminated fuel system and / or fuel tank, since it is very aggressive. Rather, it is suitable for cars with small mileage.

Comma Petrol Magic.. Also added to the fuel tank. One vial of 400 ml is designed to dilute in 60 liters of gasoline. Tests have shown that the additive works "softly" enough, and it can be used in machines with a strongly contaminated fuel system and contaminated fuel tank. Please note that the appearance of the appearance in the cleansing fluid is flakes, it is normal, it is not worth paying attention.

Toyota D-4 Fuel Injector Cleaner. Suitable not only for Toyota cars, but also other injection machines. Its average efficiency is noted, and the cleaner is more likely suited as a prophylactic agent.

RVS Master Injector Cleans IC. A good tool for cleaning the nozzles. In addition to cleaning the injector, also cleans the gasoline passing through the system. The effectiveness of the means is generally estimated as above average.

Carbon Clean.. Fluid for washing injectors (MV-3 concentrate) MotorVac. Another popular cleansing liquid. Tests show its average efficiency, which is determined by a small price.

Verylube benzobak XB 40152. This is rather a complex tool that not only cleans the nozzles, but also cleans the entire fuel system, spark plugs. Reduces fuel consumption, removes water from gasoline, protects parts from corrosion. Sold in a small tube of 10 ml volume is added to the fuel tank. In the repair mode, it is designed for 20 liters of gasoline, and in prophylactic - by 50 liters.

ABRO IC-509 Injector Cleaner. Also is a complex cleaner. Packaged in packing volume of 354 ml. This volume of the additive is designed for 70 liters of gasoline.

Runway RW3018.. In addition to cleansing the nozzles, also cleans the cylinder walls, spark plugs and other engine elements. It has its average efficiency, which is compensated however nevable price. Added to gasoline.

Stepup SP3211 Injector Cleaner. A tool similar to the previous one. Cleans the nozzles, candles, cylinders, facilitates the start of the engine, removes the nagar. Rather, it can be used as a prophylactic agent on new and medium-sized engines.

MANNOL 9981 INJECTOR CLEANER INJECTOR CLEANER CLEANER CLEANER. It is an additive to gasoline, and it is recommended to add a tool to the tank to filling the gasoline. In fact, it is a complex cleansing agent that brushes not only nozzles, but also the entire fuel system, removes the nagar. Suitable, rather, for prevention. The packaging of 300 ml is intended for dissolution in 30 liters of gasoline.

LAVR Injector cleaner. Also a very popular remedy, and judging by the reviews, quite effective. Unlike the composition described already from this brand, this cleaner needs to be poured directly into the fuel tank, for this purpose there is a special comfortable funnel. In addition to cleansing injectors, the tool purifies the inlet valves and combustion chambers, contributes to the binding of water in gasoline, protects metallic surfaces from corrosion. One package of 310 ml is enough for 40 ... 60 liters of gasoline.

In fact, there are quite a lot of such funds, and their complete listing does not make sense, and it is impossible, because with time new compositions appear on sale. When choosing one or another tool, try to buy those who heard or read. Do not buy cheap tools to anyone unknown brands. So you risk not only throwing money to the wind, but also subjected to the engine of your car danger. If you know good toolwhich was not mentioned - write about it in the comments.

Remember that the cleaning additives in fuel must be poured, firstly, when at a gas tank of at least 15 liters of fuel (and the number of additives should be calculated in the corresponding proportions), secondly, the walls of the gas tank must be clean. If you plan to use similar means as preventive, then they need to use approximately every 5,000 mileage kilometers.

Cleaning products for diesel nozzles

The fuel system of diesel engines is also contaminated with time and garbage and deposits accumulate. Therefore, these systems also need to be cleaned periodically. For this exist special means. In particular:

As in the case of additives for gasoline engines, the use of one or another additive depends on a large number of third-party factors, such as the previously used fuel, the overall state of the nozzles and the engine, the operation mode of the motor and even climate, where the machine is used. Therefore, the result of using one means from different car owners can differ significantly.

Conclusion

In conclusion, I would like to note that the efficiency of using certain additives depends not only on their properties, but also on the state of nozzles and other elements of the car engine (engine contamination, fuel tank and fuel system). Therefore, additives added to the fuel are perhaps more like a prophylactic agent. If the nozzles have been scored significantly - it is necessary to connect the fuel ramp to the cleaning installation and perform the liquid smear of the nozzle. If the injector clogged critically, only ultrasonic cleaning will help, it is carried out only in specialized hundred.