Dimensions of the garage for one car. Size of the garage for one car: optimal parameters of the room Optimum height of the garage for one car

home / Machine Reviews

The garage can be a detached building in a suburban area, part of the house or one of the boxes in a garage cooperative. When planning construction for one machine, in addition to its size, one should take into account the parameters of the site, the regulatory requirements for construction and the climatic conditions of the region. If a viewing pit is also planned, then a study of the groundwater level will be required. Any of these factors can affect the size of the building.

Things to consider before building a garage

Garages for one or several cars are built for many years and you need to approach the construction with all responsibility.

Certain nuances must be taken into account.

The most common mistake is drawing up a project taking into account the parameters of the machine that exists at the moment. The next car may be large sizes, then the garage will be small for him. If you do not plan to purchase an SUV or minibus, the construction should be designed based on the standard average size of passenger cars.

All calculations of the building are made based on the needs of the interior; to install a real structure on the site, the thickness of the garage walls is added to the values.
It is necessary to organize convenient travel from the street to the building.
If the gates are swing gates, you need to calculate in advance whether there is enough space for them to open the doors.

In addition to storing the machine, you should decide for yourself before drawing up a project.

Will the premises be additionally used for Maintenance, will you need racks for automotive equipment and an inspection pit. This makes its own adjustments to the minimum footage of the building.
Perhaps combining a garage with a workshop. In this case, the size of the box will increase not only due to the shelves, you will need a workbench or something else. Everyone has their own ideas about the workplace.

Sometimes they build a garage with an attic, living space on the upper level.
Do you need communications: water supply, sewerage and how far are the connection points from the construction site?

The garage can be on two levels: at the bottom they equip a cellar for storing vegetables or a utility room.
Sometimes the building is deliberately made large in order to organize in it a recreation area behind a light partition, for example, a tennis table or a sofa and a TV set for communicating with friends in a male company. If another car appears, the recreation area can be easily transformed into an additional parking lot. Most best size a garage for one car is one in which you can place another car. For those who are on a budget, the construction will have to build on the average car standards.

Regulatory Requirements

The regulatory requirements for the minimum size of the garage were developed by one of the research institutes back in Soviet times. Now there are not so many cars for which such a footage would be comfortable. The proposed building of the following dimensions: minimum length - 5 m, width was 2.3 m, height - no more than 2.2 meters. The distance from the car to the wall was determined at half a meter. In these conditions, it was necessary to open the door and try to get out. Nowadays, no one adheres to strict norms. People have different machines and the minimum size of the building is also not the same.

There are other rules that relate to the safety and legality of the building itself. When building a garage, it is necessary to adhere to them, otherwise the neighbors will file a complaint, and the garage will have to be dismantled.

If provided land plot for persons not related to entrepreneurial activity (Article 51, Clause 17 of the Urban Planning Code of the Russian Federation of 2016), no special permits for the construction of a garage will be required, but to be sure, this issue can be clarified with the local administration.

Fire safety(SNiP 21.01.97 "Fire safety of buildings and structures"), standards must be observed. They relate to the distance from the building to the surrounding objects. According to the rules, the distance from the fence to the garage must be at least one meter. From the garage to any building on the site - six meters. This will make it easier to extinguish the fire in case of fire, moreover, it will not spread to other buildings. A distance of at least six meters is also necessary to the buildings of neighbors. Since the garage is a fire hazardous facility, non-combustible materials are used for its construction.

Optimal garage parameters

The size of the garage will depend on the site on which it is going to be built. In a garage cooperative, there are fewer opportunities than in a private estate. If, in addition to storing the car, the building will perform other functions, this will increase the required area of the premises. Optimal sizes do not mean minimum, they are different for each case.

Here are the calculations for a standard medium-sized car.

Width. For a medium-sized car, it is 1.7 m, to which one more meter should be added for optimal drive and the ability to open the door. The resulting 2.7 m can be rounded to three.
Length. It is necessary to add another 1.5 meters to the average length of the car (5 meters): 0.5 in front of the car and one meter behind it, so that you can safely drive in, as well as open and load the trunk. The length of the garage is 6.5 meters. If you plan to install a rack, add another 0.5 m. As a result, the length of the structure is 7 meters.

Height. It must be 50 cm higher than the head of the tallest family member, and if open trunk cars are higher than the driver, then 20 cm - above the trunk. The height of the gate should be at least 20 cm higher than the car, but it is better to make it "for growth" for the next car.

Let's summarize

The minimum dimensions of a garage with a rack in the end part for an average car: width - 3 m, length - 7 m, height about 2.5 m, more precisely, depends on the type of body and the driver's height.

Knowing the size of your car, you can correct these standards. All calculations are given for the inside of the garage, in order to understand the real dimensions of the building, you should add the thickness of the walls and their decoration.

If you are planning racks, a workbench, or any machines, you must take these dimensions into account and remember that there must be at least 50 cm between the machine and any objects. By lengthening the room, you can make a light partition and get a working room.

The entrance to the garage must be at least one meter more car to get into the gate without any problems. One should not forget about the possibilities of the future car, so it is better to choose the width of the gate with a margin.

In order for the car to confidently enter the garage even in the dark, you can draw two bright lines on the concrete floor to the width of the wheels.

When building a garage, you must choose correct lighting, it will also depend on the size of the room.

Observation pit

Often there is a viewing hole in garages. To build it, you need to know about the state of groundwater under the garage. The lower level is built half a meter higher than the boundary of groundwater and freezing. Reinforced insulation will also require certain dimensions, at the bottom it is thicker than on the upper building. Even before the start of construction work, a water seal (about 30 cm) is laid so that water does not enter the basement. They use gravel and clay. You will need more finishing and insulation. All these parameters affect the depth of the inspection pit.

The width of the pit depends on the vehicle. It should be twenty centimeters narrower than a pair of wheels, in order to avoid the wheels falling into the pit. If we go back to the standard parameters of an average car, then the width of the recess will be about one and a half meters.

When calculating the length of the inspection pit, you should start from the size of the car. It should be of such a length that it provides comfortable access to the machine. Installation of the ladder will take another half meter.

Having calculated all the dimensions of the inspection pit itself, you need to correctly determine its location in the garage, it is located strictly under the car.

The very concept of the word "Garage" defines the parking lot passenger car and place possible repair and service. For personal use, a garage is, as a rule, a place for storing spare parts, Supplies, tires and so on.

A properly adjusted Toyota rearview camera even allows you to notice stones and low curbs, which will protect the body and bumper of the car from scratches. This is especially true for cars with a low fit. Install the rear camera, front view it is possible in the company "Cybercar Motor Rus".

Location of garages

First of all, you need to determine where will the storage location of the machine be located, it could be:

Parking space in the parking lot of the apartment building;
Parking space on adjoining territory apartment building;
Multi-level detached parking;
Garage on the site of individual housing construction;
Garage in the garden;
Separate box in the garage cooperative;

Garages for one car can be:

Determining the size of parking spaces and garage

Construction or arrangement of a parking space for a passenger car v Russian Federation is subject to the laws of the country and in particular:

The Urban Planning Code;
Fire safety rules;

Parking space in the parking lot of an apartment building

Parking device in an apartment building is provided at the stage of development of design and estimate documentation and the size of a parking space for one car is determined in accordance with SP 113.13330.2012, which are an updated version of SNiP 21-02-99 *.

According to these documents, the size of the parking space should be 5.3 X 2.5 meters for an ordinary passenger car and 6.0 X 3.6 meters for vehicles transporting or driving disabled people, including disabled people who use wheelchairs.

If you find a parking space in the parking lot of an apartment building, use it for storing spare parts, tires, and even more so for storing fuels and lubricants not allowed.

Parking space in the adjoining territory of an apartment building

Parking spaces on the adjacent territory of an apartment building should be provided for when developing design estimates for a capital construction object in accordance with the legislation of the Russian Federation.

Size of one parking space for a car is determined by SP 113.13330.2012 and is 5.3 X 2.5 meters for an ordinary car and 6.0 X 3.6 meters for vehicles carrying or driven by disabled people.

Russian laws prohibit unauthorized occupation of any place in the parking lot near an apartment building. These places are counted as places common use and everyone can put their car in any free space.

However, the legislation of the Russian Federation provides for cases in which the general meeting of homeowners in an apartment building may decide on the distribution parking spaces among themselves and to determine each named parking lot. But even in this case, it is not allowed to erect any enclosing structures around the perimeter of the parking space. The only assumption is that a common standard shed is set up by the homeowners' meeting.

Multi-level free-standing parking

Multi-level free-standing parking is an object of capital construction. Such a parking lot is being built according to the previously developed design and estimate documentation, which has passed the State or non-departmental examination. The sizes of parking spaces are determined, as in the case of apartment buildings, by the legislation of the Russian Federation.

Garage on the site of individual housing construction

If in the previously considered cases the sizes of parking spaces and the standard sizes of a garage for 1 car were determined by the legislation of the country, then box size for one car near your own home are determined only by the owner's imagination, his financial capabilities and a reasonable approach to this issue when developing a project for a garage for one car.

But in any case, to determine the size of the garage for passenger car, as a basis, you need to take the standard dimensions of the parking space 5. 3 X 2.5 meters. Next, you need to open all the doors of the car and see how comfortably you can get around the car if there are walls. Depending on the car model, the comfortable perimeter of the parking space will be determined.

But again, does the box owner's imagination imply the presence of any racks near the longitudinal walls? If "Yes", then the width of the shelves is added to the result. The next question that arises is: "Where to put the locksmith's workbench?" The most convenient location is the inner end wall. Therefore, to the length of the parking space, you need to add a distance that will ensure comfortable performance of locksmith work on the workbench.

The next important question is optimal box height... High-quality maintenance and repair of a car without access to the underbody is impossible. It is necessary to decide how to provide this access:

With the help of a viewing hole;
With the help of a lift;
With the help of a tipper;

The observation pit does not require raising the ceiling of the box, but requires going deep into the ground to a depth that will be comfortable for work and will be individual in each case.

The lift device will increase the height of the ceiling, which will depend on the make and model of the device. In this article, the task was not set to analyze the advantages and disadvantages of lifting devices, methods and conditions for their installation, but the task was to consider the factors affecting the size of the box for one car.

A car tipper is a device in which a car is fastened in one way or another, and then flips over on one side or the other. The device allows access to the underbody of the vehicle, completely safe for the vehicle and the operator. But in this case, it must be taken into account that the width of the garage must be increased.

When servicing a car and even more so during repairs, the owner is often faced with the need to use lifting devices... This could be:

Hand hoist;
Electric hoist;

The type of lifting device installed is determined by the capabilities of the car owner during the development of the car parking device project.

The hoist can be installed:

At a certain point on the ceiling of the garage;
On a monorail along the axis of the box. In this case, the monorail is attached to the ceiling, and the hoist itself has the ability to move along the box.
The device of a suspended or supporting crane beam.

The device of the lifting mechanism significantly reduces the labor costs of the car owner during its maintenance and repair, but significantly affects the optimal size of the garage for one car.

Garden garage

The project of the device of the garage on the garden plot must correspond to its purpose. If a garage is needed only to shelter the car from bad weather or from the scorching rays of the sun, then the construction of a capital facility will be clearly unjustified. In this case, a lightweight structure made of metal enclosing structures with dimensions comparable to the standard 5.3 by 2.5 meters or, in extreme cases, with a garage size of 6.0 meters by 3.6 meters, is sufficient.

But if a decision is made to build a garage for one car with the possibility of performing a full range of works, then the determination of the size of the box should be approached in the same way as in the case of an individual housing construction site.

Separate box in the garage cooperative

The dimensions of the garage when building it in a garage cooperative are determined by the size of the allocated area and a certain height, adopted by the general meeting of the cooperative's shareholders. As a rule, garage cooperatives are built according to an individual project, which are carried out by a contractor design organization and the dimensions of a garage for one car with metal swing gates are laid down in the design and estimate documentation.

What you need to consider when developing a project, building a capital garage and determining its size. The minimum dimensions of the box can be influenced by the type of gate. If swing gates are installed, then it must be borne in mind that they open outward and the possibility of clearing them from snow must be provided.

When installing sliding gates they, as a rule, fit into the minimum dimensions of the box. Installation of roller shutter gates is associated with some design-related inconveniences. But such gates allow you to keep the dimensions of the box and fully automate the opening and closing of the entrance.

Before starting design work, in mandatory you need to familiarize yourself with the archival engineering and geological surveys. The presence of nearby groundwater or heaving soils can nullify all efforts to develop a project and build a garage and even more really affect the size and design features buildings.

It is imperative to develop a garage project, consider in detail the structural units, clearly define the dimensions of both the box itself and the equipment. Consider and apply all fire safety requirements. Safe work practices must be provided to ensure that injury is avoided. When designing a garage, it is not necessary, but it is advisable to provide for the possibility of rest when doing any work with the car.

Building a garage space is an important step that requires a careful approach. After all, in fact, this is a home for a car, and it must reliably protect from bad weather, be warm and comfortable. When planning, you need to know the standard dimensions of the garage, and already starting from this, measure the required area, taking into account your own wishes for the interior arrangement and layout.

Having decided to build a garage with your own hands, you should be guided by the current construction standards (SNiP), which regulate the rules for building a site. This will allow you to avoid troubles from the control and supervisory authorities in the future. In addition, it is necessary to clarify with the local administration the issue of the need to obtain a building permit.

The site for construction is allocated in accordance with GOST fire safety, one of the mandatory requirements of which is to maintain the distance to the border of the site and other buildings. So, the distance from the border of the site should be at least one meter, and the minimum distance to other buildings should be 6 meters.

When designing the interior, it is recommended to focus on the existing vehicle. To calculate the height, you can take into account your own height, as well as the edge of the tailgate or hood in the open position, and add half a meter "in reserve".

Thus, the distance from floor to ceiling will be approximately 2.5 meters. If you plan to install a lift, then its dimensions are taken into account. The width of the building is also calculated based on the dimensions of the car plus a half-meter margin for the convenience of opening doors and the passage between the wall and the car.

Further design is carried out based on the planned number of parking spaces and number of storeys.

For 1 car

Today there are many models of passenger cars that differ in both technical specifications, and in its dimensions. When calculating, it is customary to take the average length of the car, which is 4.5 meters. It should be noted that the stock free space in this case, more is done - about 1 meter (0.5 on each side).

For 2 cars

When planning the future premises, the following points are taken into account:

material - if the site for construction is limited, then thick walls, coupled with insulation, will conceal useful space;
area - it is necessary to provide not only an indent from the walls, but also the free distance between cars. It should be at least 1.2-1.5 meters so that when opening the door they do not touch each other;
garage doors - their number depends on the owner's desire, but in some cases it is more advisable to mount two products in order to avoid heat loss;
additional arrangement - if it is planned to carry out minor car repairs on their own, then it is advisable to provide space for racks on which tools, spare parts, etc. will be placed.

For 3 cars

Here you need to clearly understand how they will be located vehicles... The size of the building directly depends on this. The most common option is when all cars are lined up. However, this design takes up too much area, which is not always acceptable. It is more rational to plan the parking of two cars parallel to each other, and the third - perpendicular. This will reduce the building plot.

2-storey garage

Such buildings are not very common in our country, while this is a good opportunity to get additional premises that can be used as an economic or residential one.

In the latter case, this is relevant when building a garage for two cars. If the second floor is planned for residential premises, then you need to know that certain requirements apply to it.

Therefore, the project documentation is preliminarily drawn up, which takes into account the following information:

the weight of the building - depending on the density of the materials, the type of foundation is chosen;
layout;
dimensions of the premises on the first and second floors;
type of roof and used roofing material.

It is important to know that before starting construction, it is required to conduct geodetic surveys of the soil for the depth of groundwater and determine the type of soil.

We calculate the dimensions according to the type of vehicle

Consider the features of calculating the size of the garage, depending on the car that is planned to be installed in it.

The current standards set the following standard values: 4x6x2.5 meters. However, given the variety of existing models, an individual approach to calculations is required in each case. Some of the nuances have been described above.

Jeep

SUVs exceed the dimensions of a passenger car, therefore, the design is carried out based on the size. For example, for a typical LandCruiser J200 they are 4.95x1.97x1.88. It makes sense to make a reserve of 2-3 meters here. As a result, we get a room of 8x5x3 meters.

Minibus

In this case, the parameters of the garage are even more impressive. For example, the length of a GAZelle with an extended platform is 6.7 meters. Accordingly, the length of the garage should be about 10 meters. When calculating, you should take into account the likelihood of installing an awning, which increases the ceiling height to 3.5 meters.

Separating space for the driveway

The convenience of entering the garage largely depends on the parameters of the area allocated for it. In a private house, there are no special problems with the arrangement, since you can practically not limit yourself in size.

Most often, platforms are mounted 3x4 meters (for jeeps - 5x4). The ramp is built with a slope ranging from 6 ° to 18 °. This does not affect the placement of the vehicle, but it allows the rainwater to drain off.

The construction or redevelopment of a garage is a responsible occupation, which must be approached with an understanding of the seriousness of the issue. This issue is especially serious during the construction of a stationary garage, and even built into the house. Such a design is extremely difficult to remake, therefore, you need to immediately take into account all the available opportunities and prospects for buying more large car... Often car owners build a garage based on their current cars, but the car does not always live in our possession as long as the garage. Therefore, this fact must be taken into account when building a garage and arranging the interior space.

It is much better to make not the standard dimensions of a garage for 1 car, but to organize the space much more so that you can safely buy a minivan or minibus and park in this garage. It is possible that some parts of this room will initially be occupied by storage rooms or shelving with various property, but this will not prevent you from freeing up space if necessary and getting the right size of the garage for a new purchase. Therefore, it is quite simple to answer the question of what a garage for one car should be - it should be as large as possible.

Standard dimensions and requirements for the dimensions of the garage

There are certain government requirements that determine what the minimum garage should be. These are rather outdated sizes, since the average nice car it simply will not fit into such a garage. It should be remembered that you will use this particular place to park your car for a long time, and your comfort depends on its dimensions.

Also important point is the determination of the individual parameters of your car. For example, the owners of the Infiniti QX80 and Lada granta need completely different garages. Here we are talking not only about the size, but also about the degrees of protection and other factors. Nevertheless, dimensional standards exist, they are spelled out in various documents and are expressed by the following numerical factors:

the minimum garage length is 5 meters, however, today there are SUVs with a greater length;
the width of the garage should be at least 2.3 meters - you can argue with this point if you try to put the car in a similar garage;
the size of the space from the side of the car to the wall of the garage should be at least 0.5 meters - in this case, getting out of the car will be terribly inconvenient;
the height of the garage is also defined in the standards - 2.2 meters, but this height is not enough for comfortable use of the room;
all standards and figures are indicated taking into account the fact that only a car will be stored in the garage, but this is clearly not for our person.

In the garage, we are ready to store not only the car, but many other necessary things. At a minimum, every self-respecting driver should have a stand, or better a rack with tools. Given the complexity of repairing a modern car, he may not touch them, but it is imperative to have a set of various devices. It is also customary to keep tires, wheels, various temporarily unnecessary things at home in the garage, and on a private estate there is also a lawn mower, irrigation hoses and other important equipment.

Therefore, the standard dimensions of the garage are clearly underestimated, but you can build on them when forming the inner space of your garage. As mentioned earlier, the best garage for one car is a large room, in which, if necessary, there will be several cars. Therefore, when designing and building a garage, make the largest possible opening for arrival and maximum large territory garage.

Optimal garage dimensions and interior layout

Let's say that you are not going to change your car anytime soon, and you have built a garage large enough. Now your task is to correctly plan the internal space in order to obtain the highest practicality and quality of the territory exploitation. In order not to be mistaken in this moment, it is worth paying attention to the tasks that the garage will perform. Often the car owner has a specific hobby or additional business that can be set up in the garage.

Also here you can organize a place for storing temporarily unnecessary things by building a large lockable shelving unit. Avoid building open shelves and racks, because every time you visit the garage, you will see a terrible mess. For a motorist, a garage is an important room in which there must always be order. Choosing the optimal size of the free garage zone for your car, give preference to the following options:

the length of the free space exceeds the length of your car by one meter - half a meter on each side of the car;
the width of the free space on the side of the driver's door is one meter, and on the side of the passenger's door - at least 0.8 meters;
the free space above your head is at least 0.5 meters, and better even more and more spacious;
if possible, it will be very helpful to organize inspection pit, which will help you perform auto maintenance yourself;
It is better to enter the garage at least 1 meter wider than the car, but with this parameter it is better to overdo it so as not to limit yourself in the future when buying a car;
it is also important to perform high-quality lighting, which depends on the size and shape of your garage;
for a correct drive on a concrete floor, you can apply two stripes of paint along the line of the wheels, which will be a guide for the driver.

These features are not required by any standards or regulations, but they are an important aspect of your comfort. When building a garage, remember that you are building a house for your car, and you yourself will be spending a lot of time here. A well-equipped garage will allow you to get maximum pleasure from using this space, as well as maximum comfort of its operation.

When equipping shelves and racks, it is necessary to do everything with high quality and durable, but you should not produce welded structures that are difficult to dismantle. It is better to give preference to shelves of small component parts, which are easily removable and can be used in other premises. After all, no one knows what yours will be next car... Perhaps a purchase awaits you Cadillac escalade and the largest possible expansion of the garage. If you do not know how to equip a garage, watch the following video:

Summing up

The high-quality possibilities of building a garage today allow you to use absolutely any materials and projects. Nobody limits you in size or layout, and standards are there only to give you an idea of the minimum required dimensions. Therefore, make a garage for one car at least for the entire perimeter of the house, allocating a basement for this purpose. It will also not be superfluous, you will definitely find what to do in such a room, how to occupy it correctly.

With the help of modern projects and options for arranging a garage, you can build a convenient place to park your car. But in financial plan building a garage can be challenging. Therefore, coordinate all your wishes with the budget so as not to get into an unpleasant situation. If you have equipped a garage for one car with your own hands, share your experience in the comments to the post.

When planning the construction and arrangement of a garage for a car, it is necessary to carefully consider in advance its future dimensions, the occupied area and the features of the internal layout. This is especially important when building a garage with your own hands.

Important: will the room be part of a residential building or adjoin it? Typically, such garages have a roof in common with the house, and redesigning its structure will be a difficult and costly job.

Things to Consider When Planning Your Garage

The most common mistake when creating is that the owners calculate the dimensions of the garage for 1 car, which is currently available. At the same time, few people envisage the appearance of another car, which, in terms of its dimensions, may not fit into the existing room.

Important. When planning, it must be remembered that the garage is being built for a long time, during which the owners can change several cars with different dimensions. Try to calculate the inside dimensions of your garage based on the average size of a standard passenger car. If in the future it is possible to purchase an SUV or a minibus, then it is better to take care of the ceiling height in advance.

Creating for yourself the optimal size of a garage for 1 car, you need to answer in advance such questions as:

Will the garage be used only for temporary storage of the car or is it also planned to carry out routine maintenance, such as changing tires, changing oil and other working fluids, carrying out minor repairs;
Will there be water supply and sewerage, which will entail an increase in space for the installation of plumbing and heaters;
Whether the premises will be used as a warehouse for spare parts or food for long-term storage.

All these points are very important, and if they are available, the area of the garage for 1 car is significantly increased.

Dimensions and regulatory requirements for the dimensions of garages

Certain requirements for minimum size garage premises, however, these standards are advisory in nature and to the dimensions modern cars unsuitable. It is important to remember that the standard dimensions of a garage for 1 car should provide not only sufficient storage space for the car itself, but also your comfort when servicing it.

The standards provide for:

The minimum length is 5 meters;
The minimum width is 2.3 meters;
The space from the car door to the inner wall of the garage must be at least 500 cm;
The height of the room is not less than 2.2 meters.

For your information. It is worth noting that there is indicated minimum width garage for 1 car, subject to a detached building intended solely for storing a car. The length and height of the room were also calculated taking into account the dimensions of Soviet-made cars.

It is obvious that modern domestic or imported car it will hardly fit into such a garage, and there is no need to talk about comfortable movement and even more service.

If we consider the modern requirements for the garage, especially if it is an extension to a residential building (see), then it is better to foresee a place in it for installing shelving and storage rooms. This garage will store seasonal tires, spare wheels, fuel lubricants, a set of tools, as well as canned food and things that are rarely used by residents.

Of course, the cost of such a garage will increase significantly, but this is a necessary price for your comfort and convenience. However, making the room unjustifiably large is also not worth it, since every square meter of the building has a cost.

All space should be used rationally.

Optimal dimensions and space layout

In order to deduce your standard size of a garage for 1 car, first plan the interior space taking into account the arrangement of the shelving (see). The room will be visually perceived comfortably if its width is half the length.

Try to use shelves with doors in order to hide small things as much as possible, this will create a sense of order.

Important. An unspoken guide to determining the size of a garage states that optimal size the premises are calculated as follows: we take the average dimensions of the car, add to them the necessary space for movement, then add the area of shelving and other structures. As a result, we will get the overall internal dimensions of the room.

If your financial resources or the size of the site are limited, then such calculations are made as follows:

The average width of a passenger car is 1.7 meters. We add at least another 1 meter to this size so that you can safely open the door and get out of the car. As a result, we get the standard width of a garage for 1 car of 2.7 meters, which is usually rounded to 3 meters;
Next, we take the average car length of 5 meters and add another 1.5 meters to this value. Usually 0.5 meter is added at the front of the car and 1 meter at the rear in order to be able to open and calmly unload the trunk. As a result, we get a length of 6.5 meters, to which we add an additional 0.5 meters for shelving.

Important. It is better to install racks for storing spare parts and spare rubber at the end of the garage in front of the car, as shown in the photo below. This will shorten the width of the room but make it longer. In addition, this placement will help to avoid accidental scratches on the sides.

The height of the garage should be 30-40 cm higher than your head, and if the car is taller than you, then the height is measured from the roof of the car. When calculating the height, be sure to take into account the type of body. For example, the height of the garage should allow the trunk lid to be fully opened and have a margin of at least 10 cm.

So, we get a structure with such dimensions as: 7 meters long, 3 meters wide and 2.5 meters high, depending on the height and type of body. Such dimensions of a garage for 1 car are optimal for saving space and finances.

Important. As a result of simple calculations, we obtained the dimensions of the internal area of the room, and in order to obtain the external dimensions, it is necessary to add the thickness of the future walls and floors to the existing dimensions.